Panasonic DMREZ485V Dvd Recorder - English/spanish - Page 81
Troubleshooting Guide, If the Antenna Connector doesn't Match, Changing RF Output Channel
View all Panasonic DMREZ485V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Troubleshooting Guide If the Antenna Connector doesn't Match To Reset This Unit Use the following connection to suit the antenna lead to the unit's RF IN terminal, and the 75 coaxial cable to the antenna terminals on your TV or other equipment. Refer to the other equipment's operating instructions for more information. This unit from the antenna 300−75 transformer (Flat) Twin lead 300 cable Other equipment (television etc.) To this unit's RF IN terminal To reset the channel information and the clock settings On the main unit CH Press and hold both buttons for about 5 seconds. To reset the ratings level settings 75−300 transformer 75 coaxial cable VHF or UHF Television Changing RF Output Channel If you connected this unit and a TV without an audio/video cable, interference (lines or patterning) or a very poor picture may appear on the TV. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove the interference. RF Output Channel Press the channel up/down buttons to select a RF Output Channel. Ch. 3 Press and hold OK for more than 5 seconds. -The RF output channel number displays on the unit's display. TRACKING/V-LOCK to select "CH 3" or "CH 4". CH The unit's display Each time you press the button: CH 3 (Default setting) CH 4 OFF For connections with the audio/video cable, set the RF output channel to "OFF". You can reset both parental rating ( 56) and DVD-Video rating ( 59). With the unit stopped OPEN/CLOSE to open the disc tray. On the main unit CH REC SD CARD Press and hold both buttons for about 5 seconds. To restore the unit if it freezes On the main unit POWER Press and hold for more than 10 seconds. -The unit is off. or On the main unit Press and hold for more than 1 second RESET with a pointed object. OK to finish. Reference Notes When you set the RF output channel to "CH 3" or "CH 4" Video from this unit can be viewed on channels 3 and 4 on the TV. Press [VCR/TV] to switch to VCR mode and output video from this unit ( 16). 81 RQT9056