Panasonic E-37-V E-37-V Operation Manual

Panasonic E-37-V Manual

Get Panasonic E-37-V PDF manuals and user guides View all Panasonic E-37-V manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic E-37-V manual content summary:

  • Panasonic E-37-V | E-37-V Operation Manual - Page 1
    E-37-V Dome Camera Operation Manual i
  • Panasonic E-37-V | E-37-V Operation Manual - Page 2
    Table of Contents 1 Network Config ...1 1.1 Network Connection 1 1.2 Log in ...1 2 Live...6 2.1 Encode Setup 6 2.2 System Menu ...7 2.3 Video Window Function Option 7 2.4 Video Window Setup 8 2.4.1 Image Adjustment 8 2.4.2 Original Size 9 2.4.3 Full Screen 9 2.4.4 Width and Height Ratio 10
  • Panasonic E-37-V | E-37-V Operation Manual - Page 3
    3.1.3 Playback Cut 15 3.1.4 Record Type 15 3.1.5 Progress Bar 15 3.1.6 Assistant Function 16 3.2 Picture Playback 16 3.2.1 Play...17 3.2.2 Playback File 17 3.2.3 Snapshot Type 19 4 Setup ...21 4.1 Camera ...21 4.1.1 Conditions 21 4.1.2 Zoom and Focus 27 4.1.3 Video ...28 4.1.4 TCP/IP ...35
  • Panasonic E-37-V | E-37-V Operation Manual - Page 4
    4.1.10 UPnP ...44 4.1.11 Bonjour ...45 4.1.12 Multicast 46 4.1.13 802.1x ...47 4.1.14 QoS ...48 4.2 Event...49 4.2.1 Video detect 49 4.2.2 Abnormity 54 4.3 Storage Management 56 4.3.1 Schedule 56 4.3.2 Destination 61 4.3.3 Record control 63 4.4 System ...64 4.4.1 General...64 4.4.2 Account...
  • Panasonic E-37-V | E-37-V Operation Manual - Page 5
    4.5 Information ...73 4.5.1 Version ...73 4.5.2 Log...74 4.5.3 Online User 75 5 Alarm ...76 6 Log out ...78 Important The following functions are for reference only. Some series products may not support all the functions listed below. v
  • Panasonic E-37-V | E-37-V Operation Manual - Page 6
    need to have its IP address. User can use quick config tool to search IP of the network camera. Please refer to Quick Configuration Tool manual. 1.2 Log in It needs to install WEB plug-in when you use WEB client for the first time, the exact operation steps are shown as
  • Panasonic E-37-V | E-37-V Operation Manual - Page 7
    After successful connection, the login interface is shown as in Figure 1-3; input your user name and password. Default factory username is admin and password is 12345. Figure 1-3 The system will display "Modify Password" prompt box for your first login, users need to modify the password and save it
  • Panasonic E-37-V | E-37-V Operation Manual - Page 8
    Figure 1-5 Click on "Please click here to download and install the plug-in". The system pops up warning information to ask you whether run or save this plug-in. See Figure 1-6. 3
  • Panasonic E-37-V | E-37-V Operation Manual - Page 9
    Figure 1-6 You must either run or save the file to local and install it. Follow the following steps. Click on run, you will see Figure 1-7and Figure 1-8. Figure 1-7 4
  • Panasonic E-37-V | E-37-V Operation Manual - Page 10
    Figure 1-8 When plug-in installation completes, the installation page closes automatically. The web-end will refresh automatically, and then you can view video captured by the camera. Figure 1-9 5
  • Panasonic E-37-V | E-37-V Operation Manual - Page 11
    2 Live After you logged in, you can see the live monitor window. See Figure 2-1. 2 1 3 4 There are four sections:  Section 1: Encode setup bar  Section 2: System menu  Section 3: Window function option bar  Section 4: Window adjust bar Figure 2-1 2.1 Encode Setup The encode setup
  • Panasonic E-37-V | E-37-V Operation Manual - Page 12
    Parameter Main stream Sub (Extra) stream 1 Sub (Extra) stream 2 Protocol Function Streaming media protocol connection, under main stream config, monitor video or not. Generally for storage and monitor. Streaming media protocol connection, under sub stream 1 config, monitor video or not. When
  • Panasonic E-37-V | E-37-V Operation Manual - Page 13
    2 Snapshot Click on the button to snapshot, save picture to path in Ch 5.1.2.5. 3 Triple snap Click it, system can snap at 1f/s. All images are saved to path in Ch 5.1.2.5. 4 Record Click it, system can record. All images are saved to path in Ch 5.1.2.5. 5 Easy focus Click it, you can see
  • Panasonic E-37-V | E-37-V Operation Manual - Page 14
    Figure 2-6 Click this button to display/hide image control interface. Click it to open picture setup interface. This interface is on the top right pane. Please refer to the following sheet for detailed information. Parameter Function Video setup It is to adjust monitor video brightness. It is
  • Panasonic E-37-V | E-37-V Operation Manual - Page 15
    appears on the right of preview interface, as shown in Figure 2-7, click left mouse button to adjust focus zooming configuration. Note: · The product series which support motorized zoom, synchronous focus and back focus have this button. · Auto-focus after zoom and focus adjustment. 10
  • Panasonic E-37-V | E-37-V Operation Manual - Page 16
    3 Playback Web client playback supports video playback and picture playback. Note: Before playback, user shall set storage management 3.1 Playback The playback interface is shown as in Figure 3- 1. 6 2 1 3 4 5 Figure 3- 1 There are
  • Panasonic E-37-V | E-37-V Operation Manual - Page 17
    The function of play is shown as in Figure 3- 2. 1 234 5 6 7 Figure 3- 2 Parameter Function ① Play When you see this button, it means pause or not played record. Click on this button, switch to normal play status. ② Stop Click this button to stop playing. ③ Play frame Click on this
  • Panasonic E-37-V | E-37-V Operation Manual - Page 18
    progress bar in color. While, green represents normal record, yellow represents motion detect record, red represents alarm record, and blue represents manual record. Step 2. Click on certain time on progress bar, playback starts from this time. See Figure 3- 4. Figure 3- 4 Step 3. Click on file
  • Panasonic E-37-V | E-37-V Operation Manual - Page 19
    Parameter Search Record Download Format Figure 3-5 Function It means records within searched start time and end time on the date. There are two formats: dav, mp4. 14
  • Panasonic E-37-V | E-37-V Operation Manual - Page 20
    to download file to local.  Record type is "mp4", click on download button and download file to path in Ch 5.1.2.5. Note: System does not support download and playback of MP4 file. Click on back button to go to calendar interface. 3.1.3 Playback Cut Note: Playback cut function will automatically
  • Panasonic E-37-V | E-37-V Operation Manual - Page 21
    Parameter 24 hours 2 hours 1 hour 30 min Figure 3- 8 Function Click on it, means video in past 24 hours. Click on it, means video in past 2 hours. Click on it, means video in past 1 hour. Click on it, means video in past 30 min. 3.1.6 Assistant Function Video playback assistant function is shown
  • Panasonic E-37-V | E-37-V Operation Manual - Page 22
    See Figure 3-10. 2 1 3 3.2.1 Play Figure 3-10 Figure 3-11 Default icon is and it means pause or not played picture. Click on play button to switch to normal play status. Icon become Click on it to pause. 3.2.2 Playback File 17
  • Panasonic E-37-V | E-37-V Operation Manual - Page 23
    Figure 3-12 Step 1. Click on file list , select snapshot file of the date. Step 2. Double click on file in list, to play this snapshot. Parameter Function Search It means all snapshot files within the start time and end time of selected date. 18
  • Panasonic E-37-V | E-37-V Operation Manual - Page 24
    Parameter Download Back Function Click on download button to download snapshot file to local. Click on back button to return to calendar interface and re-select time. 3.2.3 Snapshot Type Figure 3-13 19
  • Panasonic E-37-V | E-37-V Operation Manual - Page 25
    After checking snapshot file type, in file list only display file of selected type. Users can also select the snapshot type to be displayed via the dropdown box above the file list. See Figure 3-14. Figure 3-14 20
  • Panasonic E-37-V | E-37-V Operation Manual - Page 26
    4 Setup Web client setup support camera, network, time, storage, system and system info view. 4.1 Camera 4.1.1 Conditions Here you can view device property information. Slight differences may be found due to
  • Panasonic E-37-V | E-37-V Operation Manual - Page 27
    Contrast Saturation Sharpness Gamma Anti-flicker It is to adjust monitor window contrast. The larger the number, the higher the contrast is. You can use this function when the whole video bright is OK but the contrast is not proper. Please note the video may become hazy if the value is too low. If
  • Panasonic E-37-V | E-37-V Operation Manual - Page 28
    tail is.  For the same environments, the noise of the low motion blur mode shall be smaller than that of the auto mode.  Manual  It is to display manual exposure value. White Balance It is to set the white balance mode. It has effect on the general hue of the video. This
  • Panasonic E-37-V | E-37-V Operation Manual - Page 29
    black and white video.  Sensor input: It is for external connection to IR light to control day/night mode. Note: Only some non-IR devices support sensor input function. It adjusts sensitivity of color and black/white switch. There are low, medium and high levels. Default is medium. Note: Available
  • Panasonic E-37-V | E-37-V Operation Manual - Page 30
    BLC Mode BLC is used for backlight situation.  BLC  Default BLC: auto exposure according to scene.  Custom: select area to exposure, the objective is to make appropriate brightness in selected area. 3D NR Mirror Full-screen Test Default  WDR  For the WDR scene, this function can lower the
  • Panasonic E-37-V | E-37-V Operation Manual - Page 31
    Profile management has three modes: normal, full time and schedule. If you select normal, the video will be configured as normal as in Figure 4-2. Figure 4-2 If you select full time, you must select either day or night, and the video will be configured accordingly as in Figure 4-3 and Figure 4-4.
  • Panasonic E-37-V | E-37-V Operation Manual - Page 32
    ~ 24:00 as night. Figure 4-5 Important  The setup becomes immediately effective after you click on OK.  You can see WDR option only if your camera supports WDR function. System does not support long-time exposure or low noise mode. 4.1.2 Zoom and Focus Note: Only motorized vari-focal devices
  • Panasonic E-37-V | E-37-V Operation Manual - Page 33
    Parameter Zoom Focus Auto Focus Reset Refresh Function Adjust the focal length of the lens by clicking or long press "+" or "-". Speed can be used to adjust the length of one step by single click. Note: After adjusting zoom, the device will focus automatically. Adjust the lens definition by
  • Panasonic E-37-V | E-37-V Operation Manual - Page 34
    fps to record. There are two options: VBR and CBR. Please note you can set video quality in VBR mode. Note: WEB interfaces don't support motion detect and alarm code stream setting. There are five options: H.264 (main profile standard, H.264H (high profile standard), H.264B (Baseline Profile), H.265
  • Panasonic E-37-V | E-37-V Operation Manual - Page 35
    Parameter Bit Rate I Frame Watermark Settings Function  In CBR, the bit rate here is the max value. In dynamic video, system needs to low frame rate or video quality to guarantee the value.  The value is null in VBR mode.  Please refer to recommend bit rate for the detailed information. Here you
  • Panasonic E-37-V | E-37-V Operation Manual - Page 36
    4.1.3.3 Video Overlay The video overlay interface is shown as in Figure 4- 9. Figure 4- 9 Figure 4- 10 31
  • Panasonic E-37-V | E-37-V Operation Manual - Page 37
    Figure 4-11 Figure 4-12 Please refer to the following sheet for detailed information. Parameter Privacy mask Function  Here you can privacy mask the specified video in the monitor video.  System max supports 4 privacy mask zones. 32
  • Panasonic E-37-V | E-37-V Operation Manual - Page 38
    . You can drag the yellow box to move it. Note: You cannot enable location and overlay at the same time. 4.1.3.4 ROI Note: Some series don't support ROI setup function. Figure 4-13 33
  • Panasonic E-37-V | E-37-V Operation Manual - Page 39
    Figure 4-14 Parameters Note Enable Image Quality Check "Enable", then it will display the ROI in the video monitoring window; Check "Disable", then it won't display.  Set the image quality of ROI, ranging from 1～6, default is 6. Note: For fisheye device, it ranges from 1~6 (best), default is 6 (
  • Panasonic E-37-V | E-37-V Operation Manual - Page 40
    current setup. Figure 4-15 4.1.4 TCP/IP The TCP/IP interface is shown as in Figure 4-16. It supports IPv4 and IPv6. IPv4 supports static IP and DHCP. IPv6 supports static IP only. When users manually modify IP address, WEB will automatically jump to the new IP address. Figure 4-16 Please refer to
  • Panasonic E-37-V | E-37-V Operation Manual - Page 41
    Alternate DNS Function It is to set current host device name. It max supports 15 characters. Please select the Ethernet port. Default is wired. Please and you cannot set IP/subnet mask/gateway. Select static mode, you must manually set IP/subnet mask/gateway. It is to display hose Mac address. It
  • Panasonic E-37-V | E-37-V Operation Manual - Page 42
    Enable ARP/Ping set device IP address service. You can use ARP/Ping command to modify or set the device IP address if you know the device MAC address. Before the operation, please
  • Panasonic E-37-V | E-37-V Operation Manual - Page 43
    can leave it in blank if it is the default value. Follow standard RTP protocol and when encode mode is MJPEG, the max resolution only supports 2040*2040. HTTPs Check HTTPs enable, login as https://ip:port. Protect data. Default port is Enable https://ip . It is disabled by default. HTTPs
  • Panasonic E-37-V | E-37-V Operation Manual - Page 44
    4-18 4.1.6 PPPoE The PPPoE interface is shown as in Figure 4-19. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via
  • Panasonic E-37-V | E-37-V Operation Manual - Page 45
    . The DDNS is to set to connect the various servers so that you can access the system via the server. Please go to the corresponding service website to apply a domain name and then access the system via the domain. It works even your IP address has changed. When the device connects
  • Panasonic E-37-V | E-37-V Operation Manual - Page 46
    Please refer to the following sheet for detailed information. Parameter Function Server Type You can select DDNS protocol from the dropdown list: CN99 DDNS, NO-IP DDNS, Dyndns DDNS, QUICK DDNS, the QUICK DDNS function is realized according to the customized private protocol. Server Address
  • Panasonic E-37-V | E-37-V Operation Manual - Page 47
    can set prefix by themselves. Test It is to test if the domain name can be used or not. The parameter exists only when selecting "manual" in "Mode". Username The user name you input to log in the server, optional. 4.1.8 IP filter The IP filter interface is shown as in Figure
  • Panasonic E-37-V | E-37-V Operation Manual - Page 48
    Default value is 25. You can modify it if necessary. Anonymity User Name Password Sender Authentication (Encryption mode) Title (Subject) For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name, password and the sender information. The
  • Panasonic E-37-V | E-37-V Operation Manual - Page 49
    Click the "Add/Remove Windows Components" and then select the "Network Services" from the Windows Components Wizard. Click the Details button and then check detect it via the "My Network Places". Under manual mode, you can modify external port. Under auto mode, select idle port for
  • Panasonic E-37-V | E-37-V Operation Manual - Page 50
    the Bonjour service in the same LAN to search the network camera device and then access if you do not know the network camera information such as IP address. You can view the server name when the network camera is detected by the Bonjour. Please note the safari browse support this function
  • Panasonic E-37-V | E-37-V Operation Manual - Page 51
    Figure 4-25 4.1.12 Multicast The multicast interface is shown as in Figure 4-26. Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host can just send
  • Panasonic E-37-V | E-37-V Operation Manual - Page 52
    . Main stream is 40000, sub stream is 40002 and the range is 1025～65534. 4.1.13 802.1x 802.1x (port based network access control protocol) supports manual selection of authentication method to control if device connected to LAN can join the LAN. It well
  • Panasonic E-37-V | E-37-V Operation Manual - Page 53
    QoS interface is shown as below. See Figure 4-28. Qos (Quality of Service) is network security mechanism. It is a technology to fix the network delay and jam problem and etc. For the network service, the quality of service includes the transmission bandwidth, delay, the packet loss and etc. We can
  • Panasonic E-37-V | E-37-V Operation Manual - Page 54
    for various data packets. Command The value ranges from 0 to 63. The router or the switcher can provide different service for various data packets. Enable Check it to enable QoS. Wireless QoS 4.2 Event 4.2.1 Video detect 4.2.1.1 Motion Detect The motion detect interface is shown as in
  • Panasonic E-37-V | E-37-V Operation Manual - Page 55
    Figure 4-29 Figure 4- 30 50
  • Panasonic E-37-V | E-37-V Operation Manual - Page 56
    Figure 4- 31 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Enable video You need to check the box to enable video mask detection alarm. mask detection Enable defocus detection Working
  • Panasonic E-37-V | E-37-V Operation Manual - Page 57
    Parameter Area Record Record Delay Relay out Alarm Delay Send Email Audio linkage Flash linkage PTZ Snapshot Function Here you can set motion detection region and its sensitivity and area. (The higher the sensitivity is, the easier to trigger motion detect; the smaller the area, the easier to
  • Panasonic E-37-V | E-37-V Operation Manual - Page 58
    Figure 4-32 Different colors represent different areas. Each area can set different detection zones. Detection zone can be irregular and discontinuous. Please refer to the following sheet for detailed information. Parameter Name Sensitivity Area threshold Waveform Delete all Function Default area
  • Panasonic E-37-V | E-37-V Operation Manual - Page 59
    Delete Delete selected area. 4.2.2 Abnormity Abnormity includes No SD Card, Capacity Warning, SD Card Error, Disconnection, IP Conflict and Unauthorized Access. Note: Only device with SD card function has these three statuses: No SD card, capacity warning, and SD card error. Device without SD card
  • Panasonic E-37-V | E-37-V Operation Manual - Page 60
    Figure 4-35 Please refer to the following sheet for detailed information. Parameter Function Enable Check to alarm when SD card is abnormal. Relay-out Check to enable relay-out alarm. Relay out delay The alarm output can delay for the specified time after alarm stops. The value ranges from
  • Panasonic E-37-V | E-37-V Operation Manual - Page 61
    it exceeds this limit, user account will be locked. Figure 4-37 4.3 Storage Management 4.3.1 Schedule Before schedule setup, user must set record mode is auto or manual. Note: If record mode in record control is off, then device will not snapshot according to schedule. 4.3.1.1 Record Schedule 56
  • Panasonic E-37-V | E-37-V Operation Manual - Page 62
    Record schedule steps: Step 1. Click on Record Schedule, see Figure 4-38. Figure 4-38 Step 2. From Monday to Sunday select record time, click on setup on the right, see Figure 4-39.  Set period according to actual need. There are six periods available each day.  By checking or unchecking, you can
  • Panasonic E-37-V | E-37-V Operation Manual - Page 63
     Yellow color stands for the motion detect record/snapshot.  Red color stands for the alarm record/snapshot. Figure 4-41 Step 4. In record schedule interface, click on OK. System prompts it is successfully saved. 4.3.1.2 Snapshot Schedule Snapshot setup as: Step 1. Click on Snapshot Schedule tab,
  • Panasonic E-37-V | E-37-V Operation Manual - Page 64
    Step 2. From Monday to Sunday select snapshot time, click on setup on the right. See Figure 4-43  Set snapshot period according to actual need. There are six periods available each day.  By checking or unchecking, user can add or delete three types of snapshot schedule: General, Motion and Alarm.
  • Panasonic E-37-V | E-37-V Operation Manual - Page 65
    Figure 4-44 Step 5. In snapshot interface, click on OK. System prompts it is successfully saved. 4.3.1.3 Holiday Schedule Holiday schedule can set specific date as holiday. Step 1. Click on Holiday Schedule tab, see Figure 4-45. Figure 4-45 60
  • Panasonic E-37-V | E-37-V Operation Manual - Page 66
    to the three modes (general/motion/alarm) in the Schedule interface. Please check the box to enable the save functions. Note: Only device supports SD card has local. Figure 4-46 Please refer to the following sheet for detailed information. Parameter Function Event Type It includes: scheduled
  • Panasonic E-37-V | E-37-V Operation Manual - Page 67
    Here you can view local Micro SD card or NAS disk information. You can also operate the read-only, write-only, hot swap and format operation. Figure 4- 47 4.3.2.3 FTP The FTP interface is shown as in Figure 4- 48. You need to check the box to enable the FTP function. When network disconnect
  • Panasonic E-37-V | E-37-V Operation Manual - Page 68
    You need to check the box to enable the NAS function. Select NAS storage, fill in NAS server address and corresponding store path, then you can store video file or pictorial information in the NAS server. Select NAS storage as to same file to NAS disk. See Figure 4- 49. Figure 4- 49 Parameter
  • Panasonic E-37-V | E-37-V Operation Manual - Page 69
    HDD is full, it will stop record.  Overwrite: Current working HDD is full; it will overwrite the previous file. There are three modes: Auto/manual/close. There are two options: main stream and sub stream. 4.4 System 4.4.1 General The General interface is shown as in Figure 4- 52. Figure 4- 52
  • Panasonic E-37-V | E-37-V Operation Manual - Page 70
    Parameter Device Name Video Standard Function It is to set device name. Note: Different devices have different names. This is to display video standard such as PAL. Language You can select the language from the dropdown list. The date and time interface is shown as in Figure 4-53. Figure 4-53
  • Panasonic E-37-V | E-37-V Operation Manual - Page 71
    between the device and the time server. 4.4.2 Account  For the character in the following user name or the user group name, system max supports 15digits. The valid string includes: character, number, and underline.  Password can be 0~32 characters in number and letter only. User can modify other
  • Panasonic E-37-V | E-37-V Operation Manual - Page 72
    Figure 4-54 Enable anonymity login: Enable anonymity login, and input IP. No username or password is required, you can log in by anonymity (with limited rights). You can click logout to end your session. Add user: It is to add a name to group and set the user rights. See Figure 4- 55. Hidden user "
  • Panasonic E-37-V | E-37-V Operation Manual - Page 73
    Figure 4- 55 Modify user It is to modify the user property, belonging group, password and rights. See Figure 4-56. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup. Please click the OK button to save.
  • Panasonic E-37-V | E-37-V Operation Manual - Page 74
    Figure 4-56 4.4.2.2 Group The group management interface can add/remove group, modify group password and etc. The interface is shown as in Figure 4- 57. 69
  • Panasonic E-37-V | E-37-V Operation Manual - Page 75
    Figure 4- 57 Add group: It is to add group and set its corresponding rights. See Figure 4- 58. Please input the group name and then check the box to select the corresponding rights. It includes: preview, playback, record control, PTZ control and etc. Figure 4- 58 Modify group Click the modify group
  • Panasonic E-37-V | E-37-V Operation Manual - Page 76
    Here you can modify group information such as remarks and rights. Figure 4-59 4.4.3 Default The default setup interface is shown as in Figure 4- 60. Please note system cannot restore some information such as network IP address. Figure 4- 60 4.4.4 Import/Export The interface is shown as in Figure 4-
  • Panasonic E-37-V | E-37-V Operation Manual - Page 77
    Figure 4-61 Please refer to the following sheet for detailed information. Parameter Function Import Export It is to import the local setup files to the system. It is to export the corresponding system setup to your local PC. 4.4.5 Auto Maintenance The auto maintenance interface is shown as in
  • Panasonic E-37-V | E-37-V Operation Manual - Page 78
    Parameter Function Auto Reboot Check it and set auto reboot time. Auto Delete Old Files Check it and set period within 1~31 days. 4.4.6 Upgrade The upgrade interface is shown as in Figure 4-63. Please select the upgrade file (file extension is ".bin") and then click the update button to begin
  • Panasonic E-37-V | E-37-V Operation Manual - Page 79
    Figure 4-64 4.5.2 Log Here you can view system log. See Figure 4-65. Figure 4-65 Please refer to the following sheet for log parameter information. Parameter Function Start time Set the start time of the requested log. (The earliest time is 2000/1/1) End time Set the end time of the requested log
  • Panasonic E-37-V | E-37-V Operation Manual - Page 80
    select one item to view the detailed information. Clear You can click this button to delete all displayed log files. Please note system does not support clear by type. Backup You can click this button to backup log files to current PC. 4.5.3 Online User The online user interface is shown as
  • Panasonic E-37-V | E-37-V Operation Manual - Page 81
    5 Alarm Please note some series product does not support this function. Click alarm function, you can see an interface is shown as in Figure 5-1. Here you can set device alarm type and alarm sound
  • Panasonic E-37-V | E-37-V Operation Manual - Page 82
    will be no image prompt, but alarm record will be in list on the right. When alarm occurs, system auto generates alarm audio. The audio supports customized setup. Here you can specify alarm sound file. 77
  • Panasonic E-37-V | E-37-V Operation Manual - Page 83
    6 Log out Click log out button, system goes back to log in interface. See Figure 6- 1. Figure 6- 1 Note:  This manual is for reference only. Slight difference may be found in user interface.  All the designs and software here are subject to change without prior written
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
i
E-37-V Dome Camera Operation Manual