Panasonic ET-PKD130B ET-PKD130B Installation Instructions
Panasonic ET-PKD130B Manual
 |
View all Panasonic ET-PKD130B manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic ET-PKD130B manual content summary:
- Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 1
). Thank you for purchasing this Panasonic product. ■■ To customers The "Installation Instructions" is intended for use by the projector, give this manual to the certified personnel and have them perform the procedure. ■■ To installation personnel Read the "Installation Instructions" thoroughly - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 2
components 4 Standard installation dimensions 5 When using the ET-DLE030 Fixed-focus lens 5 When using a lens other than the ET-DLE030 Fixed-focus lens or a PT-RZ575 / PT-RZ570 projector...8 Installation...12 Setting up the screen...12 Screws tightening torques 12 Installing the bracket to the - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 3
out by the certified personnel. zzIf this product is not installed correctly, serious accidents may result. zzFollow the instructions specified in "Installation" of this manual, and perform secure installation. Install the ceiling mount bracket in accordance with the structure and materials of the - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 4
projector models listed below require five of the six supplied captive washer hex head bolts (M6 × 16) for installation. Model: PT-RZ575 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-DZ780 / PT-RZ570 / PT-DW750 / PT-DX820 / PT-RZ670 / PT-RW630 / PT-DZ770 / PT - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 5
, the L1, L2, L3, L4 and L5 values assume that the projector is positioned at the center longitudinal slide position. For details on how to do this, refer to "Before Installation" in the ET-PKD130H Installation Instructions. Ceiling * Includes the thickness of the attachment plate. L4 350 510 - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 6
function may be possible, even after setup. Refer to the Operating Instructions of ET‑DLE030 for details. Note zzDimension L4 is not the distance from the projector rear panel to the wall, but the distance from the projector rear panel to the screen. zzWhen [GEOMETRY (2D)], [GEOMETRY] and [KEYSTONE - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 7
For 16:9 aspect ratio L1 = 0.3365 × SD + 0.0047 = 0.3459 × SD + 0.0047 A1 = 0.2597 × SD - 0.0690 = 0.2942 × SD - 0.0690 In the case of PT-DX820 / DX810 / DX800 / DX610 / D6000 / D5000 For 4:3 aspect ratio L1 = 0.3133 × SD + 0.0047 A1 = 0.1881 × SD - 0.0665 For 16:9 aspect ratio = 0.3413 - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 8
-focus lens or a PT-RZ575 / PT-RZ570 projector> The dimensional relationship between the screen and the projector is shown below. Establish the dimensions after assessing the area possible for installation. The zoom function of the lens allows you to adjust the projection distance (excluding the ET - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 9
of projectors in this manual are projector shifts by 54 mm (2-1/8″) based on the central axis of the adjustment pole. However, when replaced with PT PT-DZ780 / DW750 / DX820 0.023 0.007 0.064 0.024 0.025 0.031 0.075 PT-RZ570 0.032 PT-RZ575 0.021 zzFormulas for calculating projection distance - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 10
- 0.2991 Note zzUse the ET-DLE085 ultra short focus zoom lens for the PT-RZ770, PT-RZ660, PT-RZ970, PT-DZ780, PT-RZ670 and PT-DZ870 projectors. zzWhen [GEOMETRY (2D)], [KEYSTONE (3D)], [GEOMETRY] and [KEYSTONE] are used, distance is corrected to become smaller than the specified image size. In the - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 11
short focus zoom lens for the PT-RX110, PT-DX820 and PT-DX100 projectors. zzWhen [KEYSTONE] is used, distance is corrected to become smaller than the specified screen size. In the case of PT-RZ570 Aspect ratio 16:10 16:9 4:3 Projection distance (L) formula Minimum (LW) Maximum (LT) = 1.2598 - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 12
method in a position which takes into account the projection distance and angle and the type of screen being used. projector Attach the projector mount bracket to the projector (sold separately). PT-RZ670 / RW630 PT - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 13
supplied captive washer hex head bolts (M6 × 16) as shown in the figure on the left. Projector mount bracket Secure in five places 1) Place - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 14
Turn the adjustment leg clockwise to secure it to the projector. Attention zzFor information on how to join this product to instructions or other instructions supplied with the ceiling mount bracket (ceiling mount bracket for low or high ceilings). zzWhen attaching the wire rope to a PT-RZ575 / RZ570 - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 15
vary with the model. 1) Remove the wire rope from the ceiling. 2) Remove the two captive washer hex head bolts. zz Make sure the projector is properly supported from below while doing this. Pole base Hex head bolt, captive washer 3) Slightly loosen the captive washer hex head bolts in the hooks - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 16
install this product and the drop prevention kit supplied with the product on the projector. Then install the projector on the existing ceiling mount bracket according to the following instructions. Note zzThe illustration shows an installation using the ET-PKD56H ceiling bracket for high ceilings - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 17
in the figure on the left. Attention zzAfter mounting the projector on the ceiling mount bracket, adjust the installation angle. For information on how to adjust the installation angle, refer to the installation instructions or other instructions supplied with the ceiling mount bracket (for low or - Panasonic ET-PKD130B | ET-PKD130B Installation Instructions - Page 18
Specifications External dimensions Weight Width: 378 mm (14-7/8") Height: 56 mm (2‑7/32") Depth: 400 mm (15-3/4") Approx. 3 (6.61 lbs.) https://panasonic.net/cns/projector/ SS1013AM7047 -PS Printed in Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
Thank you for purchasing this Panasonic product.
■
To customers
The “Installation Instructions” is intended for use by installation personnel.
Be sure to employ certified personnel to
perform the installation.
After installation, have the installation personnel return these “Installation Instructions” to you, and save it for future use.
When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.
■
To installation personnel
Read the “Installation Instructions” thoroughly and then perform the operation correctly and safely.
Be sure to read through the section entitled “Read this first!” (page 3) before proceeding with the installation.
If the separately sold ET-DLE030 Fixed-focus lens will be used with the projector, obtain the “Operating Instructions”for
the
lens from the customer and refer to this manual and the “Installation Instructions” during installation.
After installation, return these “Installation Instructions” to the customer.
* The figure above shows this product combined with the separately sold ET-PKD130H Ceiling Mount Bracket (for High
Ceilings, 6-axis Adjustment).
Installation Instructions
Projector Mount Bracket
Model No.
ET-PKD130B
TQZJ577-7