Panasonic EY6932 EY6932 User Guide

Panasonic EY6932 - HAMMER DRILL DRIVER Manual

Get Panasonic EY6932 - HAMMER DRILL DRIVER PDF manuals and user guides View all Panasonic EY6932 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic EY6932 manual content summary:

  • Panasonic EY6932 | EY6932 User Guide - Page 1
    Cordless Hammer Drill Driver Operating Instructions Model No: EY6932 IMPORTANT This manual contains safety information. Read manual completely before first using this product and save this manual for future use.
  • Panasonic EY6932 | EY6932 User Guide - Page 2
    BATTERY OPERATEDTOOLS WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS or other practical way to secure and support the workpiece to a stable platform. Holding the
  • Panasonic EY6932 | EY6932 User Guide - Page 3
    repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. 22) When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts damage the battery pack or motor. Use
  • Panasonic EY6932 | EY6932 User Guide - Page 4
    particles. .FOR BATTERY CHARGER & BATTERY PACK 1) SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for battery charger EY0230. 2) Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack. 3) CAUTION
  • Panasonic EY6932 | EY6932 User Guide - Page 5
    Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric electric shock, or injury to persons. 23) Do not short the battery pack. A battery short can cause a large current flow, over heating and burns. 24)
  • Panasonic EY6932 | EY6932 User Guide - Page 6
    ) . ASSEMBLY Attaching or removing bit Note: When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock). This tool is equipped with a keyless drill chuck. 1. Attachment Insert the bit and turn the Lock collar clockwise (looking from
  • Panasonic EY6932 | EY6932 User Guide - Page 7
    connection. 2. To remove the battery pack: Press the two buttons on the sides of the battery pack. Slide the battery pack out of the tool body the motor stops immediately. Note: When the brake operates, a braking sound may be heard. This is normal. Forward/Reverse lever Operation drilling. The
  • Panasonic EY6932 | EY6932 User Guide - Page 8
    bit locked in place, the tool can be used as a manual screwdriver (up to 22.6 Nm, 230 k f-cm, 199 motor. * See appendix for "RECOMMENDED SPEED SELEC- TION". For Appropriate use of Battery pack Ni-MH Battery pack EY9231 Charge the Ni-MH battery fully before storage in order to ensure a longer service
  • Panasonic EY6932 | EY6932 User Guide - Page 9
    or any other occasions. CAUTION: Do not use power source from an engine generator. Do not cover vent holes on the charger and the battery pack. . LAMP INDICATIONS Flashing Lit Flashing quickly Flashing slowly Lit Flashing Charger is plugged into a wall outlet. Ready to charge. Now charging
  • Panasonic EY6932 | EY6932 User Guide - Page 10
    call 1-800-8-BATTERY for information on how to recycle this battery. . ACCESSORIES Use only bits suitable for size of drill's chuck. is applied may cause a motor breakdown.) Use the following as a guide to select low or high speed for the job. EY6932 DRILLING SCREW TIGHTENING MATERIAL/ MORTAR
  • Panasonic EY6932 | EY6932 User Guide - Page 11
    screw Wood screw Masonry screw Capability Mortar/Brick Drilling Wood Metal Metal hole saw Motor No load speed LOW HIGH Blows rate per LOW minute HIGH Chuck capacity Blow strength Overall length Weight (with battery pack) EY6932 M3 ~ M6 ø 2.1 ~ ø 6.8 mm (5/64" ~ 17/64") ø 4 ~ ø 6 mm
  • Panasonic EY6932 | EY6932 User Guide - Page 12
    return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 201-392-6655. Abuse or misapplication of any power tool voids the guarantee
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Cordless
Hammer Drill Driver
Operating Instructions
Model No: EY6932
IMPORTANT
This manual contains safety information. Read manual completely before first using
this product and save this manual for future use.