Panasonic HCV110 HCV110 User Guide - Page 35

Select the menu., Close the LCD monitor., QUICK START]

Page 35 highlights

[QUICK START] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick Start Standby Mode about 60% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ≥ / / Quick Start will not work if there is no SD card inserted. ≥ Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to . 1 Select the menu. : [SETUP] # [QUICK START] # [ON] 2 Close the LCD monitor.  The status indicator A flashes green and the unit goes into Quick Start Standby Mode. 3 Open the LCD monitor.  The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k. ≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 34)/[ECONOMY (AC)] (l 34), close the LCD monitor once and open it again. ≥ Turn the unit off using the power button. - 35 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

- 35 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
When in Quick Start Standby Mode about 60% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
/
/
Quick Start will not work if there is no SD card inserted.
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
Change the mode to
.
1
Select the menu.
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit goes into
Quick Start Standby Mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put into
recording pause.
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
It may take some time for Automatic White Balance to adjust.
In the Quick Start Mode, the zoom magnification becomes approx. 1
k
.
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(
l
34
)/[ECONOMY (AC)] (
l
34
), close the LCD monitor once and open it again.
Turn the unit off using the power button.
[QUICK START]
: [SETUP]
#
[QUICK START]
#
[ON]