Panasonic HDC-TM20K8 User Manual - Page 74

∫ Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Pause the playback. ≥ When the operation icon disappears, touch the screen to display the icon again. 2 Touch . (Touch to advance the frames one at a time in the reverse direction.) Motion picture compatibility ≥ This unit is based on the AVCHD format. ≥ The video signal that can be played back on this unit is 1920k1080/50i or 1440k1080/ 50i. ≥ This unit may degrade or not play back motion pictures recorded or created on other products, and other products may degrade or not play back motion pictures recorded on this unit, even if the products support AVCHD. ≥ Normal playback is restored when you touch . ≥ When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds. ∫ Direct playback 1) Touch 1 to display the direct playback bar. ≥ Sound will be heard only during normal playback. ≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails. ≥ Any scenes where the thumbnails are displayed as cannot be played back. ≥ During motion picture playback, the power will not turn off even if the LCD monitor is closed. ≥ The remaining time for playback indication will be reset to "0h00m00s" each scene. 2) Touch the direct playback bar A. ≥ The playback is paused and the image is skipped until the position you touched. ≥ Playback starts again when you release the touch screen. ≥ Touch 2 to display the operation icon. ≥ If no operations are performed for about 3 seconds, the bar will disappear. Touch the screen again to display the bar. ≥ Direct playback bar cannot be operated with the remote control. 74 VQT2B34