Panasonic KV-S2065W Operating Instructions
Panasonic KV-S2065W Manual
 |
View all Panasonic KV-S2065W manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic KV-S2065W manual content summary:
- Panasonic KV-S2065W | Operating Instructions - Page 1
No. KV-S2065L / KV-S2065W These instructions contain the information on operating the scanner. Before reading these instructions, please go through the installation manual enclosed with this unit. Please carefully read these instructions, the enclosed installation manual and maintenance manual. Keep - Panasonic KV-S2065W | Operating Instructions - Page 2
paper handling, easy maintenance and more, Panasonic would like to contribute to your imaging needs. • Difference between the KV-S2065L and KV-S2065W is only scanning document size. Please refer to page 47 "Specifications" for details. ∫System Requirements When using the scanner, the required host - Panasonic KV-S2065W | Operating Instructions - Page 3
• Inside the scanner 36 • Cleaning the rollers 36 • Cleaning the scanning section glass, sensor rollers, document sensors and double feed detection sensors 38 • Roller cleaning paper 40 Replacing Consumables 41 Appendix Repacking Instructions 46 Specifications 47 Troubleshooting 49 Index - Panasonic KV-S2065W | Operating Instructions - Page 4
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are and used in accordance with the instruction manual, may cause harmful interference to only shielded interface cable and the provided power supply cord. Also, any unauthorized changes or modifications to - Panasonic KV-S2065W | Operating Instructions - Page 5
Notice Español AVISO: PARA EVITAR LLAMAS O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD. LA TOMA DE CORRIENTE DEBERÁ ESTAR CERCA DE ESTE EQUIPO Y EN UN LUGAR DE FÁCIL ACCESO. Svenska 5 - Panasonic KV-S2065W | Operating Instructions - Page 6
following text carefully. (For United Kingdom only) This appliance is supplied with a moulded three pin mains plug for your safety and cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in - Panasonic KV-S2065W | Operating Instructions - Page 7
Notice English The product should be used only with a power cord that is supplied by the manufacturer. Français Le produit ne devra être utilisé qu'avec le cordon d'alimentation fourni par le fabricant. Deutsch Dieses Gerät darf nur - Panasonic KV-S2065W | Operating Instructions - Page 8
roller cleaning paper, please read these instructions completely. Keep these instructions for future reference. English WARNING • Do not drink or inhale the roller cleaning paper fluid including isopropyl alcohol. • The roller matériel, s'adresser au revendeur Panasonic. NE PAS APPROCHER DU FEU. - Panasonic KV-S2065W | Operating Instructions - Page 9
. • Si necesita más información acerca del papel de limpieza de rodillos, consulte la hoja de datos de seguridad del material (MSDS). • Pregunte a la compañía de ventas Panasonic cómo obtener la hoja de datos de seguridad del material. MANTÉNGALO ALEJADO DEL FUEGO. 9 - Panasonic KV-S2065W | Operating Instructions - Page 10
unit may cause severe damage. If this occurs, turn the unit off, unplug the power cord and call for service. Do not place books, paper, or other items on the unit. Do not place the unit in an area opening in the When carrying the unit, please hold both side grips. scanner. Grip (On both sides) 10 - Panasonic KV-S2065W | Operating Instructions - Page 11
large electrical noise. extremely high or low humidity. Do not roller cleaning paper near a heater or open flame. This may cause a fire. ≥Power Source • Use a voltage level that does not vary more than d10% from the voltage level marked on the nameplate (located on the back side of the scanner - Panasonic KV-S2065W | Operating Instructions - Page 12
Connectors Used to connect the scanner unit to the host computer. AC inlet Power cord Fan exhaust vent 12 Exit document guide Power indicator When the a preimprinter. ADF / manual feed selector To prevent double feeding, adjust the selector to feed the scanning document properly. (Refer to page - Panasonic KV-S2065W | Operating Instructions - Page 13
Display Panel Instructions The required settings must be selected prior to scanning. Information . Also, this function can change the display language. STOP / START : Used to start or stop scanning a document. LCD 3 4 1 2 : Up to 32 characters can be displayed during scanning or setting. : Press to - Panasonic KV-S2065W | Operating Instructions - Page 14
Display Panel Instructions ¥ Setting the language • Select English, German after the unit was purchased. English is the default language. 1 Turn the power on while pressing the HOME key. • When "High Speed Scanner" or other words appear on the LCD, release the HOME key. Se t L a ng ua ge Eng l i sh - Panasonic KV-S2065W | Operating Instructions - Page 15
Instructions ∫Setting the scanner The following parameters can be customized using the scanner's various setting modes. If the application software provides these features, it will be supported by the scanner . Double Feed When scanning very important documents, confirm if the number of scanned - Panasonic KV-S2065W | Operating Instructions - Page 16
Display Panel Instructions No. Item 17 Feed speed Save settings (Select memory) 18 Save scanning settings (Execution) 19 Load scanning setting LCD display Contents Page Feed Speed Selection for feed speed when a document is being scanned. Save Setting Selects the memory where the - Panasonic KV-S2065W | Operating Instructions - Page 17
Display Panel Instructions Imprinter menu Depending on the setting of the "Counter setting menu", the page number of the scanned document will be printed. The imprinter option (KV-SS010) is required. If a host computer is connected, there may be settings required on the host computer as well. No. - Panasonic KV-S2065W | Operating Instructions - Page 18
roller modules replacement Replace Roll. Clear the "Replace Roll. Warning ≤≤%" display. warning 08 Setting the product ID Product ID Selects the product ID. The product ID setting depends on the host computer scanner application you are using. Allows scanner to emulate other Panasonic scanners - Panasonic KV-S2065W | Operating Instructions - Page 19
¥ Operation Display Panel Instructions MODE 3 SELECT SCAN COUNTER IMPRINT OTHERS HOME 2 Menu keys 1, 4 4 1 Press one of the menu key until the desired menu is displayed. • The SCAN, COUNTER, IMPRINT - Panasonic KV-S2065W | Operating Instructions - Page 20
Display Panel Instructions ¥ Actual settings Scan is displayed, pressing the 1 key or the 2 key will change the display to "Norm". • "H" means high. "L" means low. 05 Front side halftone 05 . F . Ha l f t one Ho s t Host installation manual. • For changing the display language, see page 14. 20 - Panasonic KV-S2065W | Operating Instructions - Page 21
Panel Instructions 06 Back ". • "D" means dark. "L" means light. Smooth None Low Medium High Host • When "Host" is displayed, pressing the 1 key or change the display to "Norm". • "H" means high. "L" means low. Host Binary Bayer dither 64 Bayer installation manual. Host None B1!1 B2!2 B3!3 B4!4 B5!5 - Panasonic KV-S2065W | Operating Instructions - Page 22
Display Panel Instructions 12 Black line removal 12 . BLK L i ne Remo v e Ho s t Host Disable Enable • This setting is valid only when the white roller kit is installed. 13 Scanning mode 13 . Scann i ng Mo d e Ho s t Host Fit to Page Actual Fit to Page : Scanner shrinks image to fit scanned - Panasonic KV-S2065W | Operating Instructions - Page 23
Display Panel Instructions 17 Feed speed 17 . Feed Speed Ho s t 18 Save scanning settings (Select memory) 18 . Save Se t t i ng Memo r y 1 Host Slow Normal Fast Fast : The scanner scans approximately 1.3 times faster than when "Normal" is set, at a resolution ranging from 200dpi to 400dpi. For - Panasonic KV-S2065W | Operating Instructions - Page 24
Instructions t e r Scan Scan User System Scan : After scanning one time, the scanner counter will be cleared. User : This counter is set to the default value when the power is turned OFF. System: Displays the total amount of scanned documents up to now. 02 Setting the user counter 02 . Use r Coun - Panasonic KV-S2065W | Operating Instructions - Page 25
Display Panel Instructions Imprinter setting menu (by pressing the IMPRINT pressing the 1 key or the 2 key, you can specify the line where printing starts from the top of the document. If "0" character is set, printing starts from 10.0 mm. The millimeter value displayed is an approximation. 02 .Pr - Panasonic KV-S2065W | Operating Instructions - Page 26
Display Panel Instructions 04 Setting the pre-imprinter orientation 04 . P r e Ro t a t e Ho s t • This setting can be done only when a pre- imprinter is installed. Host 0o 90o 180o 270o - Panasonic KV-S2065W | Operating Instructions - Page 27
Display Panel Instructions Others setting menu (by pressing the OTHERS the SCSI ID will be activated after turning the power off and turning it on again. Enable Disable When the scanner is located to terminal position on SCSI bus, set to "Enable". • Setting the terminator will be activated after - Panasonic KV-S2065W | Operating Instructions - Page 28
. Warning" will be cleared. Then "Completed" will be displayed. 08 Setting the product ID 08 .Pr oduc t ID KV - S2 0 6 5 KV-S2065 KV-SS855 KV-S2055 KV-S6045 KV-S6055 The applications for the scanner which have been set can be used. • An error results if an attempt is made to use a function which - Panasonic KV-S2065W | Operating Instructions - Page 29
will be displayed after setting scanning to start with a host computer. If the document is set and the START key is pressed, scanning will start. This is displayed in the sleep mode. To return from the sleep mode, press any key on the scanner or issue the scan instruction from the application. 29 - Panasonic KV-S2065W | Operating Instructions - Page 30
apart as shown in the illustration. Repeat these steps as necessary. Prior to scanning, remove, all staples and paper clips from pages. 1 2 3 2 Carefully align the documents. 3 Adjust the document guides slightly larger than the actual size of the document. Document guide 30 - Panasonic KV-S2065W | Operating Instructions - Page 31
the hopper as shown in the diagram at the right. The amount of documents should not exceed the limit mark on the document guide. This may cause a paper jam or skew. • The scanning document size is different for the KV-S2065L and KV-S2065W. Please refer to page 47 "Specifications" for details. • For - Panasonic KV-S2065W | Operating Instructions - Page 32
. 2 Exit substopper Cautions: Fig. 3 • For thin, thick or important paper, scan the document using single sheet (manual feed) mode. Also, remove the document from the pre-imprinter door (exit part) after it is scanned. • The scanner will accept 50 to 157 g/m2 (13 to 42 lbs.) paper for continuous - Panasonic KV-S2065W | Operating Instructions - Page 33
with a thickness of 0.2 mm to 1 mm, like folded documents, set the paper path selector to straight. Paper path selector The paper path selector is located on the left side of the scanner. ∫Setting the ADF / manual feed selector ¥ Single scanning When scanning a single sheet or several sheets - Panasonic KV-S2065W | Operating Instructions - Page 34
can be used. • When using a control sheet, the application software required depends on the control sheet. • Print out control sheets from the provided CD- ROM. Control sheet Caution • Use the same size control sheet as the scanning document. • When printing the control sheet, if the pattern falls - Panasonic KV-S2065W | Operating Instructions - Page 35
jams from the scanner Use your hand to pull towards you the front door release, open the front door and pull the jammed document towards the front. jams from the exit path If a jammed document appears at the exit part, open the front door and pull the document forward, then close the front door. - Panasonic KV-S2065W | Operating Instructions - Page 36
when black or white lines appear on the scanned images. • If the documents you are scanning are dirty, then the scanner parts will become dirty as well. To maintain proper scanning, clean the scanner parts frequently. ∫Cleaning the rollers 1 Turn the power off. 2 Use your fingers to hold down the - Panasonic KV-S2065W | Operating Instructions - Page 37
cleaning only in the left direction. If cleaned in the right direction, the roller may slip out of the proper position. • When cleaning the rollers in the back of the bottom scanning section glass (rollers of part A), do not touch the tip of the plastic pointer (black) in the back of the unit. Set - Panasonic KV-S2065W | Operating Instructions - Page 38
of the front door down slowly until it clicks into place. • After cleaning, clear the "Clean Roller Warning" display. (Refer to page 28.) ∫Cleaning the scanning section glass, sensor rollers, document sensors and double feed detection sensors 1 Turn the power off. 2 Use your hand to pull towards - Panasonic KV-S2065W | Operating Instructions - Page 39
while cleaning, re-attach it after cleaning. (Refer to page 40 for re-attachment.) Pointer (Black) Double feed detection sensors Document sensor Scanning section glass Sensor rollers Document sensors Document sensor Document sensor Left side view Paper detection sensor ¥ How to clean the - Panasonic KV-S2065W | Operating Instructions - Page 40
time, the alcohol will evaporate. Please use the roller cleaning paper immediately after opening the bag. Dotted line § The roller cleaning paper (Model No. KV-SS03) is available from the dealer where you purchased your scanner. For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or - Panasonic KV-S2065W | Operating Instructions - Page 41
block from the magnet. (1) Push down the green levers and remove the paper feed roller module from the scanner by holding the green levers. (2) • The paper feed roller block is attached by a magnet. • When moving the green levers, do not apply pressure in any other direction than the arrows - Panasonic KV-S2065W | Operating Instructions - Page 42
Exchange Kit (KV-SS009)", and take out the paper feed roller module. For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or your dealer. 5 Install the new paper feed roller module with the gear on the left side and the bearings into the guide grooves of the side chassis in the scanner - Panasonic KV-S2065W | Operating Instructions - Page 43
the chassis. • When attaching the paper feed roller block to the chassis, do not damage the roller. • You are now finished attaching the paper feed roller module. To continue, replace the retard roller module according to the following procedure. (The retard roller module is located in the conveyor - Panasonic KV-S2065W | Operating Instructions - Page 44
Replacing Consumables 9 Take out the retard roller module in the optional "Roller Exchange Kit (KVSS009)". For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or your dealer. 10 Pull the right side of the shaft in the direction of the arrow and - Panasonic KV-S2065W | Operating Instructions - Page 45
. Replacing Consumables 12 Close the front door. • Push both sides of the front door down slowly until it clicks into place. • After replacing rollers, clear the "Replace Roll. Warning" display. (Refer to page 28.) Before closing the front door, confirm that the conveyor is closed correctly. Or - Panasonic KV-S2065W | Operating Instructions - Page 46
. 3 Attach the screw, fixture and sheet for transportation. Screw Fixture 4 Pack the scanner. Pre-imprinter door Screw Sheet Fixture Driver software (CD-ROM 1 piece) Operating Instructions Blower Joint Power cord ≥Installation manual ≥Maintenance manual ≥Roller cleaning paper (3 pieces) 46 - Panasonic KV-S2065W | Operating Instructions - Page 47
KV-S2065L KV-S2065W Scanning face Scanning method Duplex scanning Front side : CIS (Contact Type Image Sensor) Back side : CIS (Contact Type Image Sensor) Readout speed scanning direction) The optical resolution is 400 dpi. Scanner Tonal gradation Image control Binary mode, Grayscale mode - Panasonic KV-S2065W | Operating Instructions - Page 48
30% to 80%RH Storage temperature and humidity 0°C to 35°C (32°F to 95°F), 10% to 80%RH Roller exchange kit (KV-SS009), lmprinter option (KV-SS010), Roller cleaning paper (KV-SS03), Ink cartridge (KV-SS06), White roller kit for KV-S2065W (KV-SS048), White roller kit for KV-S2065L (KV-SS071) 48 - Panasonic KV-S2065W | Operating Instructions - Page 49
See pages 50 and 51.) Clean all of the rollers. (See page 36 through 39.) Load the document correctly. Set the document guides or the document correctly. Wipe the dirty parts with a clean cloth. (See page 36 through 39.) Turn the computer OFF. Turn the scanner ON, and then turn the computer ON again - Panasonic KV-S2065W | Operating Instructions - Page 50
rollers need to be replaced. Multiple sheets were fed into the unit. The document is jammed. The document is jammed. The document is jammed. The document is jammed. The document is jammed. The document is jammed. The document is jammed. A document remains in the scanner. Dust adheres to the document - Panasonic KV-S2065W | Operating Instructions - Page 51
Troubleshooting LCD Possible Cause Remedy U3 2 Ba c k Doo A user non-serviceable error has occurred. U 5 0 N o I / F B o a r d An interface board has not been installed. Please consult with a service representative. Call tech support service. Reinstall scanner's interface board. 51 - Panasonic KV-S2065W | Operating Instructions - Page 52
manual roller cleaning warning . . 18, 28 Clearing the roller modules replacement warning 18, 28 Connector 12 Conveyor 43 COUNTER 13, 19 Counter setting menu 24 D Default 16, 23 Detect 22 Display panel 12, 13 Document guide 12, 30 Document Halftone dot 64 20, 21 High 20, 21 HOME 13 Hopper - Panasonic KV-S2065W | Operating Instructions - Page 53
Power cord 12 Power requirement 47 Power switch 12 Pre-imprinter door 12 R Readout speed 47 Retard roller module 41 Roller cleaning paper 37, 40 S Save scanning settings 16, 23 SCAN 13, 19 Scanning counter extender . . . 16, 24 Smooth 20, 21 U User counter 24 W White roller kit 48 53 - Panasonic KV-S2065W | Operating Instructions - Page 54
Imaging Solutions Company Business Unit of Matsushita Electric Corporation of America Two Panasonic Way, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ E-0330
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
 |
 |
Model No.
KV-S2065L / KV-S2065W
These instructions contain the information on operating the scanner. Before reading these
instructions, please go through the installation manual enclosed with this unit.
Please carefully read these instructions, the enclosed installation manual and maintenance
manual. Keep these documentation in safe place for future reference.
Keep the CD-ROM in the protective case. Do not expose the CD-ROM to direct sunlight or
extreme heat and do not scratch or smudge the surface of the CD-ROM.