Panasonic KX-HCM110A Network Camera

Panasonic KX-HCM110A - Indoor Network Camera Manual

Get Panasonic KX-HCM110A - Indoor Network Camera PDF manuals and user guides
UPC - 689076384544
View all Panasonic KX-HCM110A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic KX-HCM110A manual content summary:

  • Panasonic KX-HCM110A | Network Camera - Page 1
    Operating Instructions Network Camera Model No. KX-HCM110A Please read this manual before using and save this manual for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the USA or Puerto Rico
  • Panasonic KX-HCM110A | Network Camera - Page 2
    Operating Instructions Main Features IPv6*1 Network Camera Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that's currently
  • Panasonic KX-HCM110A | Network Camera - Page 3
    up to 4 cameras while supporting each audio 2-way communication. The previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally, the camera can displays maximum 12 cameras on a page in a static image. DynamicDNS Service Support DynamicDNS service allows you
  • Panasonic KX-HCM110A | Network Camera - Page 4
    and the ways of camera mount. The Getting Started helps you to easily configure the camera. • Operating Instructions (This manual) Operating Instructions explains about operations, settings, features and the cleaning method when using the camera. • Troubleshooting Troubleshooting provides
  • Panasonic KX-HCM110A | Network Camera - Page 5
    • For viewing multiple cameras Pentium 4 (1.8 GHz or greater is recommended.) Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP) Interface 10/100 Mbps network card installed Web Browser Internet Explorer 6.0 or later (Not included on the Setup CDROM) Audio Audio input/output feature
  • Panasonic KX-HCM110A | Network Camera - Page 6
    Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP) Interface 10/100 Mbps network card installed Web Browser Internet Explorer 6.0 or later (Not included on the Setup CDROM) Audio Audio input/output feature (Microphone or speaker) Note See Panasonic Network Camera support website at
  • Panasonic KX-HCM110A | Network Camera - Page 7
    The microphone picks up audio around the camera. (See page 30) Indicator Display Power on Not on the LAN On the LAN Normal Operation*1 Automatic Setting Setup Finished setting Using DHCP Getting IP address*2 Got IP address Updating Firmware Pressing FACTORY DEFAULT RESET button UPnPTM
  • Panasonic KX-HCM110A | Network Camera - Page 8
    Operating Instructions Side View Bottom View FACTORY DEFAULT RESET Button Resets settings to default (see page 147). Stand/Tripod Mounting Hole (See the Getting Started.) 8
  • Panasonic KX-HCM110A | Network Camera - Page 9
    jack (See the Getting Started.) External I/O (See page 145) Operating Instructions MAC Address (See the Getting Started.) and Serial number (S/N) is indicated on the label. Ethernet (LAN) port (See the Getting Started.) Hook for Audio Cables (See the Getting Started.) Hook for AC adaptor Cord (See
  • Panasonic KX-HCM110A | Network Camera - Page 10
    Router Not Supporting UPnP™ (IPv4 Only) ......... 64 Registering with the DynamicDNS service 65 DynamicDNS Service (IPv4/IPv6 68 Setting Date and Time 70 2.10 Changing Camera Settings 73 2.11 Adjusting Audio 78 2.12 Changing Authentication Setting and Administrator User Name and Password 80
  • Panasonic KX-HCM110A | Network Camera - Page 11
    Session Status 135 Displaying Alarm Logs 136 Restarting the Camera 136 Updating the Camera Firmware 137 Creating Configuration File 140 Loading Settings from a Configuration File 141 Resetting the Camera to Factory Default 142 Support page 143 Seeing Help page 143 Seeing Product Information
  • Panasonic KX-HCM110A | Network Camera - Page 12
    Operating Instructions 3.9 3.9.1 3.9.2 3.9.3 3.10 3.11 3.12 Setting Your PC 164 Setting the Proxy Server Settings on Web Browser 164 Setting UPnP™ to Display Camera Shortcut in My Network Places ..... 167 Setting the Internet Temporary File Setting on Web Browser 167 ASCII Character Table 168
  • Panasonic KX-HCM110A | Network Camera - Page 13
    Number" on the address bar. • If the camera image is not displayed, see page 7, page 8 and page 9 of the Troubleshooting on the Setup CD-ROM. E.g. http://192.168.0.253:50000 (in IPv4) http://XXXXX.viewnetcam.com:50000 (in IPv6) 3. The Enter Network Password window is displayed, and enter the user
  • Panasonic KX-HCM110A | Network Camera - Page 14
    Maintenance page (page 134) G To log in to the camera (page 83) B To Multi-Camera page (page 33) D To Setup page (page 40) F To Support page (page 143) Note • • When users other than an administrator are accessing the camera, [Setup] and [Maintenance] tab will not be displayed. Additionally, When
  • Panasonic KX-HCM110A | Network Camera - Page 15
    service. The camera does not work in IPv6-only network. IPv6 Domain Name Service In Windows XP, you cannot access the camera entering IP address on the web Service Providers) do not yet support IPv6, many local networks already use it. When your ISP supports IPv6, your Panasonic Network Camera
  • Panasonic KX-HCM110A | Network Camera - Page 16
    . See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommended routers. Setting up your PC 1. Click [Start] [All Programs] [Accessories] • Command Prompt window is displayed. 2. Enter "ipv6 install". • "Succeeded" is
  • Panasonic KX-HCM110A | Network Camera - Page 17
    the URL in case of no audio. Displaying to operate with IPv4, IPv6, or IPsec. 3. Close the web browser. Note • Refresh interval is [Motion] by default. You can change it on the operation bar (see page 23). • Refresh interval may change depending on the network condition, PC performance and what
  • Panasonic KX-HCM110A | Network Camera - Page 18
    ] [Security] tab and click [Custom level] on the web browser. (1) Check "Prompt" in "Download signed ActiveX Controls". (2) Check "Enable" in "Run ActiveX Controls and plug-ins". • ActiveX Controls can be installed from the file on the Setup CD-ROM. (1) Restart the PC. (2) Confirm that Internet
  • Panasonic KX-HCM110A | Network Camera - Page 19
    Operating Instructions Note • When the IP address was changed for the camera, enter it on the address bar. • Video may not be displayed quickly or audio may not be listened immediately. Wait for a while. • If you use a proxy server, set the web browser not to access the proxy server (see page 164).
  • Panasonic KX-HCM110A | Network Camera - Page 20
    Instructions The Banner When the camera accesses the Internet, the banner displays product information about cameras or announcements about the latest firmware, etc. from Panasonic checked for Allow Access from the Internet on the Automatic Setup page, or [Enable] is checked for Auto Port Forwarding on
  • Panasonic KX-HCM110A | Network Camera - Page 21
    Operating Instructions 1.2.1 Auto Centering the Image (Click to Center) Using your mouse, click any portion of the camera image. As long as it is within the pan/tilt range of the camera, the image will automatically move to place the selected point in the center of the screen. 1. Move the cursor to
  • Panasonic KX-HCM110A | Network Camera - Page 22
    Operating Instructions 1.2.2 Capturing a Still Image A still image can be saved on your PC. 1. Operate pan/tilt and select a resolution to display an image. 2. Click the capture image button. Capture Image Button • The camera image opens in another window. 3. Right-click the image, and select [Save
  • Panasonic KX-HCM110A | Network Camera - Page 23
    1.2.3 Using Operation Bar Operating Instructions End Display When the pan/tilt has reached ( : Up, : Down) and Home Position ( : Center [Default]) Preset Button: Applies the camera direction to a preset position. The camera can be set up to turn to the preset positions when detecting motions
  • Panasonic KX-HCM110A | Network Camera - Page 24
    Operating Instructions Note When the camera image is not displayed correctly, click [Refresh] at the tool bar on the web browser. The image will be refreshed. Pan/Tilt Operation Pan/tilt scan Note When the pan/tilt reaches the end, a shadow may be displayed partially. This is not a problem. 24
  • Panasonic KX-HCM110A | Network Camera - Page 25
    Operating Instructions 1.2.4 Zooming In and Out Camera has a 10x digital zoom feature. There are two methods of increasing/decreasing the size of the object on the Single Camera screen, the Multi Camera screen, and the Buffered Image screen (only while playing video): 1. Rotating the mouse wheel
  • Panasonic KX-HCM110A | Network Camera - Page 26
    Operating Instructions 1.2.5 Setting Home Position/Alarm Position/Preset Button Registering Home Position/Alarm Position A home position or 2 alarm positions can be registered. When restarted, the camera takes a home position. The alarm position is one that the camera turn to when detecting alarms
  • Panasonic KX-HCM110A | Network Camera - Page 27
    Operating Instructions Registering a Preset Button 8 camera positions can be registered as presets. By default, the preset buttons (1-4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. These buttons can be changed (see page 29). The camera can be set up to turn to the
  • Panasonic KX-HCM110A | Network Camera - Page 28
    Operating Instructions Viewing the Image 1. Click the home position, The preset alarm position or registered name will be preset button. displayed • The camera takes when the lens each position, and the image is displayed. reaches an end. Putting the cursor displays the preset name. Alarm
  • Panasonic KX-HCM110A | Network Camera - Page 29
    Changing or Deleting the Settings Operating Instructions 1. Click [Program]. • [Program] switches to [Cancel]. Click [Cancel] to quit without saving changes. 2. Pan and tilt the camera to a desired position. • When deleting, this step is not necessary. 3. Click the home position, alarm position or
  • Panasonic KX-HCM110A | Network Camera - Page 30
    Operating Instructions 1.3 Listening to Camera Audio-Talking to the Camera 1. Access the camera (see page 13). • The Top page is displayed. 2. Click the [Single] tab at the top of the page. 3. The Audio Control Bar (Talk Button, Listen Button and Adjustment Bar) is displayed at the top of the screen
  • Panasonic KX-HCM110A | Network Camera - Page 31
    registration or a web browser refresh, the volume is reset to the default (midrange) position. Audio that was muted is enabled. • The audio may be interrupted due to your PC's performance or network environment. Reduce the max. bandwidth (see page 43 and page 48). • If the camera is accessed while
  • Panasonic KX-HCM110A | Network Camera - Page 32
    Operating Instructions • The external microphone input terminal does not correspond to a line level. Audio may be distorted when the line level is input. Audio distortion will be solved if you insert the following circuits. Under no circumstance should high level audio, such as from a speaker, be
  • Panasonic KX-HCM110A | Network Camera - Page 33
    Operating Instructions 1.4 Viewing Multi-Camera page To view multiple cameras on the Multi-Camera page, you need to configure each camera on the Multi-Camera Setup page (see page 128). 1. Access the camera (see page 13). • The Top page is displayed. 2. Click the [Multi] tab at the top of the page.
  • Panasonic KX-HCM110A | Network Camera - Page 34
    • Confirm that the Internet IP address is specified for each camera and that each camera is connected to the Internet. For Internet access, local IP addresses (192.168.xxx.xxx) cannot be used. • Confirm the settings on the Multi-Camera Setup page (see page 128). • Confirm that the web browser is not
  • Panasonic KX-HCM110A | Network Camera - Page 35
    Operating Instructions 1.5 Viewing Buffered Image page To buffer the images on the buffered images on this Buffered Image page. Note Sound cannot be buffered on the Buffered Image page. 1. Access the camera (see page 13). • The Top page is displayed. 2. Click the [Buffered Image] tab at the top of
  • Panasonic KX-HCM110A | Network Camera - Page 36
    Operating Instructions 4. Display images clicking buttons below. Date and time of the day when change depending on resolution, image quality and what object the camera buffers. At the 320 x 240 pixels resolution and the standard quality, the camera buffers about 125 frames. (If 3 triggers are enabled
  • Panasonic KX-HCM110A | Network Camera - Page 37
    Operating Instructions 1.5.1 Deleting Buffered Images If you intend to delete images for delete all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. - Changing the setting for [Enable Image Buffer
  • Panasonic KX-HCM110A | Network Camera - Page 38
    (default), it is not required. E.g. http://202.208.167.XXX:50000/mobile (or XXXXX.viewnetcam.com:50000/mobile) • The camera must be allowed the Internet access for cell phone access. • When an authentication window is displayed, enter the administrator's or the general user's user name and password
  • Panasonic KX-HCM110A | Network Camera - Page 39
    disappears. • Some cell phones are not compatible with Panasonic Network Cameras. Some phones may allow viewing only on port 80, and some may not support password authentication. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for a cell phone
  • Panasonic KX-HCM110A | Network Camera - Page 40
    Operating Instructions 2 Various Camera Features 2.1 Using Camera Features 1. Access the camera (see page 13). • The Top users other than an administrator are accessing the camera, the [Setup] and [Maintenance] tabs are not displayed. • If [View Multi-Camera page] or [View Buffered Image page] is
  • Panasonic KX-HCM110A | Network Camera - Page 41
    Operating Instructions Basic (1) Network (IPv4) Configures the IPv4 network settings to connect the camera to the network (see page 43). (2) Network (IPv6) Configures the IPv6 network settings to connect the camera to the network (see page 48). (3) IPsec Enables IPsec (Transport or Tunnel mode)
  • Panasonic KX-HCM110A | Network Camera - Page 42
    Operating Instructions Advanced (14) Image Display Sets resolution, image quality and refresh interval of Single Camera and Multi-Camera page, time stamp setting, language and banner (see page 125). (15) Multi-Camera*1 Sets the camera IP address or host name, camera name on the Multi-Camera page
  • Panasonic KX-HCM110A | Network Camera - Page 43
    Operating Instructions 2.2 Connecting the Camera to Your IPv4 Network The Network page offers three options to configure the camera in IPv4. • [Automatic Setup] automatically assigns an unused IP address to the camera, and uses UPnPTM (Universal Plug and Play) to configure your router. • [Static]
  • Panasonic KX-HCM110A | Network Camera - Page 44
    Operating Instructions DHCP Setup Static Setup • Clicking [Cancel] takes you back to the previous page without saving changes. 4. Click [Save] when finished. • New settings are saved. • When finished, the following page is displayed. Note The current network settings are shown on the Status page
  • Panasonic KX-HCM110A | Network Camera - Page 45
    Operating Instructions Note When you do not know the camera IP address while setting [Automatic Setup] or [DHCP Setup], you can search it by using the Setup Program (see page 160). Setting Allow Access from • the Internet (Automatic Setup Only) Network • Configuration from Setup Program (
  • Panasonic KX-HCM110A | Network Camera - Page 46
    images by E-mail or FTP - Setting cameras by their host names on the MultiCamera Setup page - Using the DynamicDNS service - Using the alarm log notification If you have the assigned DNS server addresses by your ISP or network administrator, enter them in this data field. They usually have two
  • Panasonic KX-HCM110A | Network Camera - Page 47
    Operating Instructions Setting Connection Type Description • Select [Auto Negotiation] normally. If you cannot access the camera, see page 7 of the Troubleshooting on the Setup CD-ROM. • This setting is valid in both IPv4/IPv6. *1 If you automatically obtain the IP address from the DHCP server,
  • Panasonic KX-HCM110A | Network Camera - Page 48
    and your ISP must support IPv6 before you can use this feature. 1. Click [Network (IPv6)] on the Setup page. 2. Click a connection mode. Normally sets Automatic Setup. Uses a static IP address. 3. Enter each parameter in the proper data field. Automatic Setup The camera is automatically assigned an
  • Panasonic KX-HCM110A | Network Camera - Page 49
    Operating Instructions Static Setup You can assign a static IPv6 address to the camera. If you select [No] at the Allow Access from the Internet, the camera can be accessed only from the LAN that has an same IPv6 prefix as the camera. • Clicking [Cancel] takes you back to the previous page without
  • Panasonic KX-HCM110A | Network Camera - Page 50
    Instructions 5. Click [Restart]. • The camera restarts, and the Top page is displayed. Note • • When you do not know the camera IP address while setting [Automatic Setup], you can search it by using the Setup the assigned Default Gateway IPv6 address by your ISP or network administrator, enter
  • Panasonic KX-HCM110A | Network Camera - Page 51
    Instructions Setting DNS Server Address Max. Bandwidth Usage Connection Type Description • DNS server address is required in the following conditions. - Transferring camera images by E-mail or FTP - Setting cameras by their host names on the MultiCamera Setup page - Using the DynamicDNS service
  • Panasonic KX-HCM110A | Network Camera - Page 52
    information over unprotected networks such as the Internet. IPsec authenticates IP packets between participating IPsec devices. Unreadable Malicious User Image Allowed User Readable Internet Camera's IPsec Feature The camera can use IPsec in both IPv4/IPv6. The camera supports the following
  • Panasonic KX-HCM110A | Network Camera - Page 53
    must be set up on your PC.) Note To use IPsec, you need to set up your operating system. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the setup. ISP Service : Services for multiple global addresses (A global address must be set up to the
  • Panasonic KX-HCM110A | Network Camera - Page 54
    Web Browser : Internet Explorer 6.0 or later ISP Service (in IPv4) ISP Service (in IPv6) : Static global address service (A global address must be set up to the WAN side of the router.) : "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling" service Note See the Panasonic Network Camera support
  • Panasonic KX-HCM110A | Network Camera - Page 55
    Operating Instructions 2.5 Encrypt the Camera Image in Transport Mode The camera can encrypt the image using IPsec transport mode. Note If you use IPsec, refresh interval slows down. 1. Click [IPsec] on the Setup page. 2. Click Camera in the Transport column. • If you use transport mode in E-mail or
  • Panasonic KX-HCM110A | Network Camera - Page 56
    Operating Instructions Setting Status Pre-Shared Key Description • Check the box to • Make it known only to the specified people. • Set it as many characters as possible. • Change the password regularly. 4. Click [Save] when finished. • New settings are saved. 5. Click [Cancel]. • The IPsec page
  • Panasonic KX-HCM110A | Network Camera - Page 57
    , "IPsec" is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features. [For
  • Panasonic KX-HCM110A | Network Camera - Page 58
    . Communications may be blocked. • If you use IPsec, refresh interval slows down. • The camera can be accessed only from the PCs under the VPN router. Other PCs cannot access the camera. 1. Click [IPsec] on the Setup page. 2. Click Add in the Tunnel column. 3. Enter each parameter in the data field
  • Panasonic KX-HCM110A | Network Camera - Page 59
    as possible. • Change the password regularly. • Enter the destination network address. • Enter "IP address/Prefix length" in the data field. • Enter the WAN IP address of the VPN router on a destination network. Note • • IPv6 link-local address is not available. The camera can be accessed only
  • Panasonic KX-HCM110A | Network Camera - Page 60
    Operating Instructions Setting Description IPsec • Check the box to enable IPsec features. If you clear the box, whole IPsec features will be invalid. -CBC (128, 192, 256 bits). (Multiple selections are available.) HMAC-MD5, HMAC-SHA-1 Specifies by 28800 s (Byte setting is not supported.) 60
  • Panasonic KX-HCM110A | Network Camera - Page 61
    , "IPsec" is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features. [For
  • Panasonic KX-HCM110A | Network Camera - Page 62
    this feature as the default setting. See http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your router's manual for how to enable UPnPTM. After the UPnPTM is enabled on the router, set [Enable] for auto port forwarding. Note The camera's UPnPTM does not support IPv6. Use this
  • Panasonic KX-HCM110A | Network Camera - Page 63
    Note • • In some routers, the UPnPTM feature is disabled by default. Enable your router's UPnPTM feature following the router manual before you set up the camera. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for details. If the maximum idle
  • Panasonic KX-HCM110A | Network Camera - Page 64
    Operating Instructions 2.7.2 Connecting the Camera to a Router Not Supporting UPnP™ (IPv4 Only) To allow access from the Internet with a router not supporting UPnPTM, follow the procedures below. 1. Select [Static] on the Network (IPv4) page. (1) Access the camera (see page 13). (2) Click [Setup]
  • Panasonic KX-HCM110A | Network Camera - Page 65
    that allows you to assign an easy-to-remember name to the camera, similar to your favorite web site. DynamicDNS service also allows you to easily access the camera, even when your ISP changes the IP address. Panasonic Communications recommends you to register with it for the Internet access to
  • Panasonic KX-HCM110A | Network Camera - Page 66
    the procedures below. 1. Wait for a while, and click [Refresh] on the web browser. 2. Confirm that your network (your PC and camera) is connected to the Internet. • Personal (Camera) URL is available after you registered with the Viewnetcam.com service. • If port forwarding is not enabled or your
  • Panasonic KX-HCM110A | Network Camera - Page 67
    Operating Instructions Due to the router specifications, the image may not be displayed even if you access the camera from your PC on the same LAN as the camera. In this case, access the camera in the following procedures. • Accessing from the PC on another network (see page 13) • Accessing from
  • Panasonic KX-HCM110A | Network Camera - Page 68
    from your PC on the same LAN as the camera. In this case, access the camera in the following procedures. • Accessing from the PC on another network (see page 13) • Accessing from your cell phone (see page 38) 2.8.1 DynamicDNS Service (IPv4/IPv6) DynamicDNS allows you to choose an easy-to-remember
  • Panasonic KX-HCM110A | Network Camera - Page 69
    Operating Instructions How the DynamicDNS service works DynamicDNS service server DNS server 3. New address registered with DNS server 4. DNS looks up current address Internet 2. Camera reports new address On-site Network ISP Camera 1. Global IP address changes Off-site PC 5. Camera
  • Panasonic KX-HCM110A | Network Camera - Page 70
    Operating Instructions 2.9 Setting Date and Time The Date and Time page allows you and time settings deletes all buffered images on the internal memory. 1. Click [Date and Time] on the Setup page. 2. Set each parameter. • Set [Automatic Time Adjustment] to synchronize the time automatically with an
  • Panasonic KX-HCM110A | Network Camera - Page 71
    Instructions Automatic Time • Adjustment • • NTP (Network Time Protocol) server synchronizes the camera's internal clock. It adjusts automatically every day. Check the box to enable it. Set the NTP server IP address. In
  • Panasonic KX-HCM110A | Network Camera - Page 72
    Operating Instructions Note Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended. 72
  • Panasonic KX-HCM110A | Network Camera - Page 73
    Operating Instructions 2.10 Changing Camera Settings The Camera page allows you to set the camera name, white balance, AC power source frequency, pan/tilt range, return to specified position and color night view settings. 1. Click [Camera] on the Setup page. 2. Set each parameter. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 74
    Operating Instructions Setting Camera Name White Balance AC Power Source Frequency Description • The camera name is displayed on the Single Camera page. • Enter ASCII characters (see page 168 Correction by power line frequency. - 60 Hz (default) - 50 Hz Select 60 Hz in the United States. 74
  • Panasonic KX-HCM110A | Network Camera - Page 75
    Range*1 Tilt Range*1 Return to Specified Position Operating Instructions Description Select from the following options. • Minimum - be seen. Check the range after the setup. • If the camera is not operated during the specified period, the camera turns to the specified position. • The following
  • Panasonic KX-HCM110A | Network Camera - Page 76
    Operating Instructions Setting Color Night View Description • In the color night view mode, the camera image becomes brighter in a low illuminance. The camera image returns normal operation in a bright location. • If you enable the color night view mode, refresh interval may slow down. Note In the
  • Panasonic KX-HCM110A | Network Camera - Page 77
    Operating Instructions Specifying Pan/Tilt Range 1. Access the camera (see page 13), and click [Single] at the top of the Top page. 2. Open another web browser, and display the Camera page (see page 73). 3. Align the Single Camera page and the Camera page side to side. 4. Set the pan/tilt range. •
  • Panasonic KX-HCM110A | Network Camera - Page 78
    Operating Instructions 2.11 Adjusting Audio The Audio page allows you to adjust the built-in microphone, the use of external speaker, microphone sensitivity and external speaker volume. 1. Click [Audio] on the Setup page. 2. Set each parameter. • Clicking [Cancel] cancels your settings without
  • Panasonic KX-HCM110A | Network Camera - Page 79
    built-in microphone or external microphone sensitivity. Minimum: Decreased sensitivity Standard: Standard setting (default) Maximum: Enhanced sensitivity You can temporarily stop listening (audio input) when the camera pans or tilts. 3. Click [Save] when finished. • New settings are saved. • When
  • Panasonic KX-HCM110A | Network Camera - Page 80
    that only authorized individuals are given access to the camera. You have the option of proceeding without a User Name and Password, but it is strongly recommended that you utilize these protections. 1. Click [Administrator] on the Setup page. 2. Set each parameter. • Clicking [Cancel] cancels your
  • Panasonic KX-HCM110A | Network Camera - Page 81
    and save them. • When users other than an administrator are accessing the camera, [Setup] and [Maintenance] tab will not be displayed. • The user name and password are case sensitive. 3. Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. [For assistance
  • Panasonic KX-HCM110A | Network Camera - Page 82
    Operating Instructions 4. Click [Go to Security: Administrator page]. • The Security: Administrator page is displayed. Note • When the user name and password have been changed, the camera displays an authentication window. Enter the user name and password, and click [OK]. Administrator/General
  • Panasonic KX-HCM110A | Network Camera - Page 83
    Operating Instructions 2.13 Logging in to the Camera If you set [Permit access from guest users] on the Security: Administrator page, [Login] tab is displayed at the top of the page. After you log in as an administrator, you can access the Setup page and the Maintenance page. 1. Click [Login] tab at
  • Panasonic KX-HCM110A | Network Camera - Page 84
    Operating Instructions 2.14 Creating, Modifying or Deleting General Users The General User access level can be set for guest users. Note For general users, the Setup and Maintenance tabs are not displayed. 1. Click [General User] on the Setup page. 2. If you create a general user, click [Create]. •
  • Panasonic KX-HCM110A | Network Camera - Page 85
    3. Set each parameter. • Settings for a general user Operating Instructions • Settings for guest users • Clicking [Cancel] takes you back to the previous page without saving changes. Setting User ID List User Name/ Password Description • Up to 50 general users can be registered. • The list is
  • Panasonic KX-HCM110A | Network Camera - Page 86
    Operating Instructions Setting Access Level Description Access level is set for each see page 23) Capture Image Button (see page 22) Listen (see page 30) Talk (see page 30) View Multi-Camera page (see page 33) View Buffered Image page (see page 35) 4. Click [Save] when finished. • New settings
  • Panasonic KX-HCM110A | Network Camera - Page 87
    Operating Instructions 2.15 Buffering or Transferring Images by Timer The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. 1. Click [Trigger] on the Setup page. 2. Click No. to enable buffer/transfer. 3. Check [Enable Image Buffer/Transfer], and select [Timer] for trigger,
  • Panasonic KX-HCM110A | Network Camera - Page 88
    Operating Instructions Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Buffer/Transfer to disable it. Trigger • Selecting [Timer] enables the camera to buffer/transfer the image by timer. • Selecting [Alarm 1 or 2] enables the camera to buffer/
  • Panasonic KX-HCM110A | Network Camera - Page 89
    cannot be set for a transfer to a cell phone. 6. Set the image buffer frequencies, and click [Next>]. Note Due to the network environment, object, number of accesses, enabling IPsec, the camera may not record the numbers of images as you set. In this case, set the image buffer frequencies longer
  • Panasonic KX-HCM110A | Network Camera - Page 90
    Operating Instructions 7. Select the transfer method, and click [Next>]. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 91
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 92
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the server IP address, set 4 digits (0-255) and 3 periods such as "192.168.0.253
  • Panasonic KX-HCM110A | Network Camera - Page 93
    [Cancel] takes you back to the Trigger page without saving changes. Note • • The camera works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail®" using a web browser. The subject name by E-mail transfer uses only 24 h format. The file name
  • Panasonic KX-HCM110A | Network Camera - Page 94
    Operating Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject • Text • Description If you set the server IP
  • Panasonic KX-HCM110A | Network Camera - Page 95
    Operating Instructions 8. Confirm the settings, and click [Save]. • New settings are saved. • When finished all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. [For assistance, please call: 1-800
  • Panasonic KX-HCM110A | Network Camera - Page 96
    Operating Instructions 2.16 Buffering or Transferring Images by Alarm Signal The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. 1. Click [Trigger] on the Setup page. 2. Click No. to enable buffer/transfer. 3. Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for
  • Panasonic KX-HCM110A | Network Camera - Page 97
    Operating Instructions Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Buffer/Transfer to disable it. Trigger • Selecting [Timer] enables the camera to buffer/transfer the image by timer. • Selecting [Alarm 1 or 2] enables the camera to buffer/
  • Panasonic KX-HCM110A | Network Camera - Page 98
    Instructions 5. Set the Lens Position When Triggered setting, and click [Next>]. Note If you enable the Lens Position When Triggered setting, buffer/transfer starts after the camera for good quality. [Standard] offers standard quality. (default) [Favor Motion] optimizes for enhanced motion. [Mobile
  • Panasonic KX-HCM110A | Network Camera - Page 99
    7. Set the image buffer frequencies, and click [Next>]. Operating Instructions Note Due to the network environment, object, number of accesses, enabling IPsec, the camera may not record the numbers of images as you set. In this case, set the image buffer frequencies longer. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 100
    Operating Instructions 8. Select the transfer method, and click [Next>]. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 101
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 102
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the server IP address, set 4 digits (0-255) and 3 periods such as "192.168.0.253
  • Panasonic KX-HCM110A | Network Camera - Page 103
    [Cancel] takes you back to the Trigger page without saving changes. Note • • The camera works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail" using a web browser. The subject name by E-mail transfer uses only 24 h format. The file name
  • Panasonic KX-HCM110A | Network Camera - Page 104
    Operating Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject • Text • Description If you set the server IP
  • Panasonic KX-HCM110A | Network Camera - Page 105
    Operating Instructions 9. After you confirm the settings and click [Next>], set E-mail to step 10. Setting Disable Enable Description • The camera does not send an E-mail notification when buffering or transferring image. • The camera sends an E-mail notification (up to 3 destinations)
  • Panasonic KX-HCM110A | Network Camera - Page 106
    Operating Instructions 11. Click [Go to Trigger page]. • The Trigger page is displayed. Note • If , the following operations also delete all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. 106
  • Panasonic KX-HCM110A | Network Camera - Page 107
    Operating Instructions 2.17 Buffering or Transferring Images by Motion Detection Signal The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. 1. Click [Trigger] on the Setup page. 2. Click [No.] to enable buffer/transfer. 3. Check [Enable Image Buffer/Transfer], select [
  • Panasonic KX-HCM110A | Network Camera - Page 108
    Operating Instructions Setting Trigger Description • Selecting [Timer] enables the camera to buffer/transfer the image by timer. • Selecting [Alarm 1 or 2] enables the camera to buffer/ transfer the image by alarm signal. • Selecting [Motion Detection] enables the camera to capture/transfer the
  • Panasonic KX-HCM110A | Network Camera - Page 109
    Operating Instructions • Clicking [>Back] takes you back to the previous page. • . • Select the image quality. [Favor Clarity] optimizes for good quality. [Standard] offers standard quality. (Default) [Favor Motion] optimizes for enhanced motion. [Mobile Phone] is for a transfer to a cell phone.
  • Panasonic KX-HCM110A | Network Camera - Page 110
    Operating Instructions 7. Set the image buffer frequencies, and click [Next>]. Note Due to the network environment, object, number of accesses, enabling IPsec, the camera may not record the numbers of images as you set. In this case, set the image buffer frequencies longer. • Clicking [Cancel]
  • Panasonic KX-HCM110A | Network Camera - Page 111
    method, and click [Next>]. Operating Instructions • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 112
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic KX-HCM110A | Network Camera - Page 113
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the server IP address, set 4 digits (0-255) and 3 periods such as "192.168.0.253
  • Panasonic KX-HCM110A | Network Camera - Page 114
    [Cancel] takes you back to the Trigger page without saving changes. Note • • The camera works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail" using a web browser. The subject name by E-mail transfer uses only 24 h format. The file name
  • Panasonic KX-HCM110A | Network Camera - Page 115
    Operating Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject • Text • Description If you set the server IP
  • Panasonic KX-HCM110A | Network Camera - Page 116
    Instructions 9. After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. • If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings seeing page 114 and page 115. Setting Disable Enable Description • The camera
  • Panasonic KX-HCM110A | Network Camera - Page 117
    Operating Instructions 11. Click [Go to Trigger page]. • The Trigger page is displayed. Note • If also delete all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. Note • • • • • A change due
  • Panasonic KX-HCM110A | Network Camera - Page 118
    or FTP. E-mail or FTP Server Transport Mode Encrypted Prepare the following requirements. Item E-mail or FTP Server Camera Operating System ISP Service ISP Service Supported Feature : IPsec supported : Services for multiple static global addresses (A global address must be set up to the server
  • Panasonic KX-HCM110A | Network Camera - Page 119
    LAN WAN Tunnel Mode Not Encrypted Prepare the following requirements. Encrypted Item VPN Router Camera ISP Service (in IPv4) ISP Service (in IPv6) ISP Service (in IPv4) ISP Service (in IPv6) Supported Feature : Services for static global addresses (A global address must be set up to the WAN
  • Panasonic KX-HCM110A | Network Camera - Page 120
    Operating Instructions 2.20 Setting the Motion Detection The Motion Detection page allows you to set sensitivity high, amplitude of motion detection bar gets jumpy. 1. Click [Motion Detection] on the Setup page. 2. Click the Motion Detection bar in Threshold to set the threshold level. 3. Click the
  • Panasonic KX-HCM110A | Network Camera - Page 121
    Operating Instructions Threshold What is the threshold? The threshold is a value for the camera to detect motions on the image during the motion detection buffering. Setting the threshold lower allows subtler changes to be detected. Setting the threshold higher
  • Panasonic KX-HCM110A | Network Camera - Page 122
    light such as the fluorescent light. In other cases, motion detection by the Network Camera Recorder detects whole objects and brightness changes. The way to detect motion differs between the camera and Network Camera Recorder. Additionally, if the object's color is absorbed by the background color
  • Panasonic KX-HCM110A | Network Camera - Page 123
    Operating Instructions 2.21 Notifying Setup of an Alarm Log Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check [Enable]. 1. Click [Alarm Log] on the Setup page. When selecting Alarm1, Alarm2 or
  • Panasonic KX-HCM110A | Network Camera - Page 124
    Operating Instructions Setting A setup of operation • Time • SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E-mail • Address 1-3*2 Subject • Description
  • Panasonic KX-HCM110A | Network Camera - Page 125
    Operating Instructions 2.22 Changing Initial Settings on the Single Camera page or the Multi-Camera page The Image Display page allows you to change initial settings (display settings when a user accesses the camera) of image resolution, image quality and refresh interval. You can display a time
  • Panasonic KX-HCM110A | Network Camera - Page 126
    you select other language, the Setup, Maintenance and Support pages are displayed only in English. Banner Display • When the camera accesses the Internet, the banner displays product information about cameras or announcements about the latest firmware, etc. from Panasonic. Checking [Display] for
  • Panasonic KX-HCM110A | Network Camera - Page 127
    • When finished, "Success!" is displayed. 4. Click [Go to Image Display page]. • The Image Display page is displayed. Operating Instructions [For assistance, please call: 1-800-272-7033] 127
  • Panasonic KX-HCM110A | Network Camera - Page 128
    Operating Instructions 2.23 Configuring Multiple Cameras The Multi-Camera Setup page allows you to configure the camera IP addresses and camera names to view multiple images on the Multi-Camera page. These configurations are required to use the Multi-Camera page. Up to 12 cameras can be configured.
  • Panasonic KX-HCM110A | Network Camera - Page 129
    Operating Instructions Setting Display • IP Address*1 or • Host Name*2 Port No. • Camera Name*3 • Description Check the box to enable the camera. Set the IP address or the host name to enable the camera. Set the port number (1-65535). This camera name is displayed only on the Multi-Camera
  • Panasonic KX-HCM110A | Network Camera - Page 130
    Operating Instructions 2.24 Specifying Operation Time The Operation Time page allows you to limit the operation time. The camera image turns to a gray screen outside the operation time. Note • If you wrongly set the time period, your privacy may be seen. Confirm the time period after the setup. • If
  • Panasonic KX-HCM110A | Network Camera - Page 131
    Operating Instructions Setting Enable • A day of the • week Operation Time • Description Check the box to if Monday or Tuesday is disabled in a setting but enabled in other settings, the camera can be operated on both Monday and Tuesday. [For assistance, please call: 1-800-272-7033] 131
  • Panasonic KX-HCM110A | Network Camera - Page 132
    Operating Instructions 2.25 Controlling External Output Terminal The digital output terminal allows you to control the external devices. You can change the initial status of the output signal. Note Connect the external devices to the camera. 1. Click [External Output] on the Setup page. 2. Click [
  • Panasonic KX-HCM110A | Network Camera - Page 133
    Operating Instructions 2.26 Changing Indicator Display The Indicator Control page allows you to select Indicator operation. Indicator has three options. • Always on • Turn the indicator on when the camera is accessed. • Always off 1. Click [Indicator Control] on the Setup page. 2. Select indicator
  • Panasonic KX-HCM110A | Network Camera - Page 134
    the camera (see page 136). (5) Update Firmware Updates the camera firmware (see page 137). (6) Save Settings Creates a configuration file (see page 140). (7) Load Settings Loads settings from a configuration file (see page 141). (8) Reset to Factory Resets the camera to its default settings
  • Panasonic KX-HCM110A | Network Camera - Page 135
    Operating Instructions 3.1.1 Confirming the Status The Status page allows you to check the status of the camera. The status information provides support for troubleshooting. Clicking [Status] displays the following page. Note See Panasonic Network Camera support website at http://panasonic.co.jp/
  • Panasonic KX-HCM110A | Network Camera - Page 136
    Operating Instructions 3.1.3 Displaying Alarm Logs Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new one. 1. Click [Alarm Log] on Maintenance page. 2. Alarm Logs are displayed. Note If the camera is restarted, all alarm logs are deleted. Item New Alarm Logs Date
  • Panasonic KX-HCM110A | Network Camera - Page 137
    alarm logs on the internal memory will be deleted after the firmware update. The firmware version is displayed on the Top page and the Status page. 1. Download the new firmware on the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your
  • Panasonic KX-HCM110A | Network Camera - Page 138
    file name is displayed. 6. Confirm the firmware file name, and click [Update Firmware]. • Clicking [Cancel] takes you back to the Top page without firmware update. • The next message is displayed during update. • The camera restarts automatically after update. • The Top page is displayed in about
  • Panasonic KX-HCM110A | Network Camera - Page 139
    Operating Instructions 7. Confirm that the version number on the Top page is updated. Updated version • If the version number is updated, the firmware update is complete. [For assistance, please call: 1-800-272-7033] 139
  • Panasonic KX-HCM110A | Network Camera - Page 140
    it, the settings cannot be loaded. If you try to update the camera, create a configuration file after updating the firmware. If there is a firmware version difference between the camera that you create a configuration file from and the camera that you try to load settings to, the settings may not
  • Panasonic KX-HCM110A | Network Camera - Page 141
    default, the camera can load its settings from the configuration file. Note • The configuration file has network settings. When the settings are loaded, the network settings are also loaded as they were saved. • If you try to update the camera, create a configuration file after updating the firmware
  • Panasonic KX-HCM110A | Network Camera - Page 142
    , and then turns off for 10 seconds. • All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default. • If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera seeing the Getting Started. Note
  • Panasonic KX-HCM110A | Network Camera - Page 143
    the next page. 3.2.2 Seeing Product Information You can see product information on the Panasonic Network Camera support website. Clicking [Product Information] on the Support page displays the URL, click it. Note If the camera is not connected to the Internet, the website cannot be displayed. [For
  • Panasonic KX-HCM110A | Network Camera - Page 144
    Operating Instructions 3.2.3 Seeing Support Information You can see support information on the Panasonic Network Camera support website. Clicking [Support Information] on the Support page displays the URL, click it. Note If the camera is not connected to the Internet, the website cannot be displayed
  • Panasonic KX-HCM110A | Network Camera - Page 145
    Operating Instructions 3.3 External I/O If you connect the external devices such as sensors to the External I/O and image buffer/transfer by alarm signal is set, the camera image is transferred by the alarm detection. Explanation of the External I/O Pin Features G GND pin 1 External Sensor
  • Panasonic KX-HCM110A | Network Camera - Page 146
    Operating Instructions Circuit Diagram Example Camera 12 V Relay Light 4 3 Door Sensor 2 (Alarm 2) 2 G Door Sensor 1 ( interface circuit (customer-provided) may have to be used. Serious damage to the camera may result if a device is connected to the external I/O that exceeds its electrical
  • Panasonic KX-HCM110A | Network Camera - Page 147
    Instructions 3.4 FACTORY DEFAULT RESET Button The camera has a FACTORY DEFAULT RESET button on the side. FACTORY DEFAULT RESET Button (Press the button with a pointed object.) Pressing the FACTORY DEFAULT RESET button resets the camera to factory default. If you lose your user name and password
  • Panasonic KX-HCM110A | Network Camera - Page 148
    Operating Instructions 3.5 Default Setting List Basic Items Default Required Note Network Connection Mode (IPv4) Automatic Setup - Automatic Setup/ Static/DHCP Allow Access from the No - - Internet (Automatic Setup only) Network Configuration Enable - - from Setup Program (
  • Panasonic KX-HCM110A | Network Camera - Page 149
    Operating Instructions Items Default Required Note Network Connection Mode (IPv6) Automatic Setup - Automatic Setup/ Static Allow Access from the No - - Internet (Automatic Setup only) Port No. (Static only) 80 - 20, 21, 25 and 110 is not available.*2 IP address (Static only) [
  • Panasonic KX-HCM110A | Network Camera - Page 150
    Operating Instructions Items Dynamic Viewnetcam.com DNS User-specified DynamicDNS Date and Time Setting Time Automatic Time Adjustment Time Zone Adjust Clock for Daylight Saving Time Start Day End Day Default Required Note No check When Viewnetcam.com/ setting User-specified
  • Panasonic KX-HCM110A | Network Camera - Page 151
    Operating Instructions Items Camera Camera Name White Balance AC Power Source Frequency Pan Range (Minimum) (Home Position) (Maximum) Tilt Range (Minimum) (Home Position) (Maximum) Return to Specified Position (Time) (Specified Position) Color Night View Default Network Camera Auto 60Hz -60
  • Panasonic KX-HCM110A | Network Camera - Page 152
    Operating Instructions Audio Items Output Volume Default Enable Standard PC Audio Input Timeout 1 min Input Camera Microphone Sensitivity Enable Standard Mute during Pan/ administrator *3 Password [Blank] When setting 6-15 characters administrator *3 Retype Password [Blank] When
  • Panasonic KX-HCM110A | Network Camera - Page 153
    Operating Instructions Items General User User ID List User Name Password Retype Password Limit time of Continuous Motion JPEG Refresh Interval Access Level Default Required Note [Blank] - - [Blank] When setting 6-15 characters general user *3 [Blank] When setting 6-15 characters general
  • Panasonic KX-HCM110A | Network Camera - Page 154
    Operating Instructions Items Motion Threshold to start Detection recording Sensitivity Alarm Log A setup of operation Active Time Time Notice setup of an alarm log Port No. (SMTP) Port No. (POP) Subject Default Required Note Third blocks - - from the left Center - - Disable When
  • Panasonic KX-HCM110A | Network Camera - Page 155
    Advanced Image Display Items Single Camera Image Resolution Single Camera Image Quality Default 320 x 240 Standard Single Camera Refresh Interval Multi-Camera Image Resolution Multi-Camera Image Quality Motion 320 x 240 Standard Multi-Camera Refresh Interval Motion Time stamp setting
  • Panasonic KX-HCM110A | Network Camera - Page 156
    Operating Instructions MultiCamera Items Multi-Camera Display IP Address or Host Name Port No. Camera Name Operation 3 Preset 4 Default [Blank] Checked [Blank] [Blank] [Blank] Always Required Note - - When setting - Multi-Camera When setting IP address*1 Multi-Camera Host name*5 is
  • Panasonic KX-HCM110A | Network Camera - Page 157
    Operating Instructions *2 Set the number of 1-65535. *3 Enter ASCII characters (see page 168). But [Space and [:] are not available. *4 Enter ASCII characters for the host name (see
  • Panasonic KX-HCM110A | Network Camera - Page 158
    Operating Instructions 3.6 Cleaning After the camera is turned off by disconnecting the AC plug, clean the camera. 3.6.1 powder, cleanser, benzine, thinner, wax, petroleum products or hot water to wipe the camera. Also avoid glass cleaner, pesticide or hair spray. They may cause change in the
  • Panasonic KX-HCM110A | Network Camera - Page 159
    Instructions 3.7 Setting an IP Address on Your PC Your PC's IP address can be assigned by the following procedures. 1. Display the TCP/IP IP Address Local IP address is the network ID that is not used on the Internet. They are classified into Class A, Class B and Class C, as shown below. Set the IP
  • Panasonic KX-HCM110A | Network Camera - Page 160
    PC. • If the Panasonic Network Camera Setup window does not appear, click "setup.exe" on the Setup CD-ROM. 2. Click [Camera Setup]. Displays version information about this program. Sets up the camera. Displays the camera manuals. If your PC does not have Adobe® Acrobat® Reader®, install it from the
  • Panasonic KX-HCM110A | Network Camera - Page 161
    Operating Instructions • When the following dialog box is displayed, click [Unblock]. • You can find the camera IP address and port number by looking up the MAC address of your camera. MAC Address Port IP No. Address Camera Status IPv6 Information Camera List window Displays IPv4 or IPv6
  • Panasonic KX-HCM110A | Network Camera - Page 162
    Operating Instructions Automatic Setup (Local or Internet Access) or Manual Setup 1. Click [Execute] on the Camera List window shown on page 161. 2. Click each button to execute the program. Sets up the camera to view on the LAN. Sets up the Internet access to the camera. Manually sets up the camera
  • Panasonic KX-HCM110A | Network Camera - Page 163
    Operating Instructions Manual Setup window Set up each parameter seeing page 45-page 47. • If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up from the Setup Program. If the camera cannot be set up, restart the camera. • If "Camera setup completed" is
  • Panasonic KX-HCM110A | Network Camera - Page 164
    . Note • • • A proxy server is used to protect your network connected to the Internet. If the camera is accessed via a proxy server, problems may occur. Consult your network administrator before installing the camera. If the camera is accessed via a proxy server, the refresh interval may be slow
  • Panasonic KX-HCM110A | Network Camera - Page 165
    3. Click the [Connections] tab, and click [LAN Settings]. Operating Instructions 4. See if the Use a proxy server check box is checked or not. If checked, click [Advanced...]. See if the check box is checked or not.
  • Panasonic KX-HCM110A | Network Camera - Page 166
    Operating Instructions 5. Enter the camera IP address into the Do not use proxy server for addresses beginning with data field. (Example: 192.168.0.253) 6. Click [OK]. Note When accessing the camera via a proxy server, the Talk Button is displayed gray. Talk feature cannot be used. 166
  • Panasonic KX-HCM110A | Network Camera - Page 167
    Operating Instructions 3.9.2 Setting UPnP™ to Display Camera Shortcut in My Network Places To display the camera shortcut in the My Network Places Setting the Internet Temporary File Setting on Web Browser The old image may be displayed. In this case, set the web browser following the steps below. [
  • Panasonic KX-HCM110A | Network Camera - Page 168
    Operating Instructions 3.10 ASCII Character Table ASCII Character Table (space) 0 ! 1 " # 2 3 $ % & 4 5 6 ' 7 ( 8 ) 9 * : + ; , < - = . > / ? @ P ` p A Q a q B R b r C S c s D T d t E F U V e f u v G W g w H X h x I Y i y J Z j z K
  • Panasonic KX-HCM110A | Network Camera - Page 169
    Operating Instructions 3.11 File Size and Number of Buffered Images The following table shows the relationship between the file size of the image and the maximum number
  • Panasonic KX-HCM110A | Network Camera - Page 170
    Instructions 3.12 Specifications Network Camera Items Audio Communication Audio Bandwidth Audio Play Method Input Encoding Method Audio Input Audio Output*2 Frame rate*3 Specifications JPEG (3 Levels) 640 x 480, 320 x 240 (default), 160 x 120 About 125 frames (320 x 240) with time display 2-way
  • Panasonic KX-HCM110A | Network Camera - Page 171
    Instructions Other Specifications Items Supported Protocols IPsec Feature IKE (Internet Key Exchange) Cipher Algorithm Message-Digest Algorithm Message Transfer Condition Image Transfer Method Interface Indicator Display External Microphone Input Audio Power/Network Communication/Camera operation/
  • Panasonic KX-HCM110A | Network Camera - Page 172
    Operating Instructions Other Specifications Items Temperature Humidity Specifications Operation: 0 °C (+32 °F) to +40 °C (+104 °F) Storage: 0 °C (+32 °F) *3 Frame rate may slow down depending on the network environment, the PC performance, the image quality, enabling IPsec, or what object you view.
  • Panasonic KX-HCM110A | Network Camera - Page 173
    Index Operating Instructions 173
  • Panasonic KX-HCM110A | Network Camera - Page 174
    125 Indicator Control page 133 IPsec 52 IPv6 Domain Name Service 15 L Listen 30 Load Settings page 141 Login 83 M Maintenance page 134 Motion Detection 107, 120 Multi-Camera page 33 Multi-Camera Setup page 128 N Network (IPv4) page 43 Network (IPv6) page 48 O Operating System 5, 6 Operation Bar 23
  • Panasonic KX-HCM110A | Network Camera - Page 175
    170 Status page 135 Support Information page 144 Support page 143 System Requirements for your PC 5 T Talk 30 Timer Image Buffer/Transfer 87 Top page 14 Trademarks 4 Transport mode 55, 118 Tunnel mode 58, 119 U Update Firmware page 137 UPnP page 62 W Web Browser 5, 6 Operating Instructions 175
  • Panasonic KX-HCM110A | Network Camera - Page 176
    For product service Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. This Network Camera is designed for use in the United States of America. Sale or use of this product in other countries/areas may violate local laws.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
Operating Instructions
Please read this manual before using and save this manual for future reference.
Network Camera
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No.
KX-HCM110A