Panasonic KX-TG2248S 2.4 Ghz Digital Cdl

03.5.26 5:31 PM KX-TG2248S

This document is a text description of the control panel layout for the product listed below.

The complete operating instructions are available online in PDF format from the Customer Support

section of

www.panasonic.com

.

If you need the operating instructions in an alternate format, please contact Customer Support.

Model Number KX-TG2248S

2.4 GHz Digital Cordless Answering System

HANDSET

With the handset buttons facing you,

you will find the antenna. It is

the narrow, 2.8-inch long

protrusion at the top right. To the top left of the handset is the ringer indicator. Just below the top of

the front of the handset is a shallow oval concave. This is the earpiece. The smooth surface below the

earpiece is the display.

Below the display are two soft keys.

Each soft key is used to select the function shown on the

display directly above it.

Below the soft keys, in the center of the handset, is a concave key called the Navigator key. The

Navigator key also works as a volume key.

To the left of the Navigator key, is an oval button called the TALK button with a “nib”. The TALK

button is also the Channel button.

To the right of the Navigator key, is an oval button called the OFF button.

The OFF button has a ridge in the center.

To the lower right of the Navigator Key, is the small oval MENU button. To the lower left of the

Navigator Key, is a small oval called the Speakerphone button. The Speakerphone button is also the

Channel button.

Below these buttons is the telephone keypad, which is laid out in the conventional telephone

arrangement, with a “nib” on the 5 button.

Immediately

below the keypad are three thin buttons. The

left-most button is the FLASH or the CALL WAIT button. The middle one is the REDIAL button.

The right-most button is the MUTE button.