Panasonic KX-TG2356PW 2.4 Ghz Dig.crdless.ans Sys.

Panasonic KX-TG2356PW Manual

Get Panasonic KX-TG2356PW PDF manuals and user guides
UPC - 037988474462
View all Panasonic KX-TG2356PW manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic KX-TG2356PW manual content summary:

  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 1
    2.4 GHz Digital Cordless Answering System Operating Instructions Model No. KX-TG2356 Pulse-or-tone dialing capability The unit is Caller ID compatible. To display the caller's name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 2
    for purchasing your new Panasonic cordless telephone. Please read the IMPORTANT SAFETY INSTRUCTIONS on page 77 before use. Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 3
    powered by a rechargeable NickelMetal Hydride (Ni-MH) battery. Charge the battery for 6 hours before initial use (p. 10). location as a TV, personal computer or another with no obstructions such as walls. cordless phone. Raise the antenna. Note: • If you use the handset near a microwave oven
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 4
    9 Installing the Battery in the Handset 10 Battery Charge 10 Programmable Phone Book 42 Intercom 43 Making Intercom Calls . . . . 43 Answering Intercom Calls . 44 Transferring a Call 45 Conference Calls 47 Call Share 47 Special Features 48 Temporary Tone Dialing (For Rotary or Pulse Service
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 5
    Optional Headset 64 Direct Commands 65 If the Following Appear on Your Display 67 Troubleshooting 68 openLCR Service for Caller IQ 73 Turning Caller IQ on or off 73 Downloading Data 74 Important Safety Instructions 77 FCC and Other Information . . 79 Specifications 82 Index 83 Warranty 85
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 6
    of Controls Base unit [STOP] Button (p. 20, 56) [ANSWER ON] Button and Indicator NEW MESSAGE Indicator (p. 54) (p. 52 ) CHARGE Indicator (p. 10) [HOLD/CONF] (Conference) Button (p. 28, 47) [SP-PHONE] (Speakerphone) Button and Indicator (p. 28) MIC (Microphone) (p. 20) VOLUME Button [
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 7
    Preparation Handset Back side Speaker Location of Controls Ringer/Message Alert Indicator (p. 24, 29) Antenna Receiver Display Soft Keys (p. 8) Headset Jack (p. 64) [C] (TALK) Button (p. 25) [OFF] Button (p. 12, 25) [MENU] Button (p. 12) [s] (Speakerphone) Button (p. 25) [*] (TONE) Button
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 8
    List and the phone book. Increases [B] or decreases [d] the handset ringer and receiver/speaker volumes. Throughout these Operating Instructions: • The on hold on the handset or base unit or the Answering System is answering a call (p. 52). Flashing rapidly A call is being received. • "
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 9
    Power Outlet (AC 120 V, 60 Hz) AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services. • The unit will not work during a power failure.
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 10
    : Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 11). Close the cover and charge the battery for 6 hours. Battery Charge Place the handset on the base unit. Charge for 6 hours before initial use. • The unit beeps once, the
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 11
    . Please call 1-800-8-BATTERY for information on how to recycle this battery. Battery information After your Panasonic battery is fully charged, you mode to receive incoming calls for up to 11 days (if no phone calls are made). Battery power is consumed whenever the handset is off of the base unit,
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 12
    any time by pressing [OFF]. • If you do not press any buttons for 60 seconds, the handset will exit programming mode. • If the unit detects a problem, an error message will be displayed (p. 67) and/or error beeps will sound. 12
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 13
    Get new Info.? (p. 74) displayed if you have not subscribed to openLCR Turn CIQ off? (p. 73) service. "Turn CIQ on?" is displayed when Caller IQ is turned off (p. 73). Set answering Number of rings (p. 23) Recording time (p. 22) Message alert (p. 24) LCD contrast (p. 19) Remote code (p. 59
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 14
    . To confirm the date and time, repeat steps 1 and 2 above. • The current date and time are displayed. When finished, press [OFF]. For Caller ID service users (p. 30) • When a call is received, Caller ID information adjust the date and time if the time is incorrect. • Caller ID information will
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 15
    read, change the display language again using direct commands (p. 66). Dialing Mode Handset If you have touch tone service, set the dialing mode to "Tone". For rotary or pulse service, set to "Pulse". The factory preset is "Tone". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 16
    KBack dB SelectL Set line mode KBack dB SelectL Set line mode :B KBack dB SaveL Auto Talk Handset The Auto Talk feature allows you to answer calls simply lifting the handset off the base unit. You do not need to press [C] or [s]. The factory preset is OFF. 1 Press [MENU]. 2 Scroll to
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 17
    Preparation Programmable Settings Ringer Volume You can select the handset or base unit ringer volumes to high, medium, low, or off. The factory preset is HIGH. If the handset and base unit ringer is turned off, the handset or base unit will ring at the low level for intercom calls, and will not
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 18
    the ringer tone for intercom calls. • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive the caller hangs up before you answer the call, or - another person answers the call using another phone connected on the same line. Handset
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 19
    Preparation Programmable Settings Base unit ringer tone (use either the handset or the base unit) Base Unit Make sure the base unit is not being used. Press VOLUME [], then select the desired ringer tone by pressing [1] to [7]. [1] to [3] : Bell ringer patterns [4] to [7] : Melody
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 20
    Preparing the Answering System Greeting Message Base Unit You can record a personal greeting message of up to 2 minutes To adjust the speaker volume, press VOLUME [] during playback. • 9 levels (0-8) are available while using the Answering System. The level is displayed on the base unit. 20
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 21
    Preparation Preparing the Answering System To review the greeting Press [GREETING CHECK]. To erase the greeting Press [GREETING CHECK], then press [ERASE] while the recorded message is being played. • The unit will answer calls with a pre-recorded greeting (see below). Pre-recorded greeting If you
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 22
    You can also select the recording time by pressing [1], [2], [3] or [0] (Greeting only). 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Recording time KBack dB SelectL Recording time :3min KBack dB SaveL If you select "Greeting only", the unit will
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 23
    You can also select the number of rings by pressing [0] (Toll saver*), or [2] to [7]. 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Number of rings KBack dB SelectL Number of rings :4 KBack dB SaveL *Toll saver When you call the unit from a remote
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 24
    Enhanced). 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Recording mode KBack dB SelectL Standard recording(16min) KBack dB SaveL whether this feature is on or off. • Battery operating time will be shortened when using this feature (p. 11). 24
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 25
    conversation 1 Press [s]. • "SP-phone" is displayed. 2 Dial a phone number. • The dialed number is displayed. • After a few seconds, the display will show the length of the call. 3 When the other party answers, talk into the microphone. 4 To hang up, press [OFF] or place the handset on the base
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 26
    /INTERCOM] again. • "Hold" is displayed. To return to the call, press [C] or [s]. • The base unit user can also take the call by pressing [SP-PHONE]. • If another phone is connected on the same line (p. 9), you can also take the call by lifting its handset. • If a call is kept on hold for 6 minutes
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 27
    Making Calls Voice Enhancer Technology Panasonic's Voice Enhancer Technology clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand.
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 28
    Base Unit Base Unit 1 Press [SP-PHONE]. • The SP-PHONE indicator lights. 2 Dial a phone number. 3 When the other party answers, talk into the MIC (microphone). 4 To hang up, press [SP-PHONE]. • The indicator light goes out. [HOLD/CONF] [SP-PHONE] and Indicator [REDIAL] MIC VOLUME [] • To
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 29
    Auto Talk If the Auto Talk feature is turned on (p. 16), you can answer a call by simply lifting the handset off the base unit. Temporary ringer off is received. Base Unit 1 Press [SP-PHONE]. 2 Talk into the MIC. 3 To hang up, press [SP-PHONE]. [SP-PHONE] and Indicator MIC • To transfer the call
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 30
    services offered by your telephone company. If you subscribe to Caller ID, caller names and phone the caller's name repeatedly until the call is answered. • If the unit does not receive Caller ID does not support Caller ID, you cannot access Caller ID service. • Name display service may not
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 31
    of abbreviations, such as "Co." and "Inc.". • Caller ID supports names of up to 15 letters. If the caller's name has more than 15 letters, the name will not be displayed or announced correctly. • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 32
    Service while you were out or unavailable to answer the phone. Handset on the base unit 1 The display will review other calls logged in the Caller List. Handset off the base unit • If there are no items in the Caller List, 2 missed calls 1 "Rcvd calls" will not be displayed. Rcvd Phone
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 33
    What "," means "," indicates you have already viewed this calling information or answered the call. If the same caller calls again, the call entry with Ex. You may have to delete "1" and the area code.) • If a phone number is not displayed in the caller information, you cannot call that caller back
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 34
    Once you call back an edited number, this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time • If Caller ID Number Auto Edit is turned on (factory preset is on), phone numbers with the same area code as the number you edited will now be edited
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 35
    up to 4 area codes to be edited according to patterns F and G. When more than 5 area codes are edited, older area codes are reset to pattern H. Phone numbers from the 4 most recently edited area codes will be automatically edited. You can turn this feature on or off using the handset. The factory
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 36
    the Caller List Storing Caller Information in the Phone Book Handset Caller names and phone numbers that are in the Caller List can be stored in the phone book. 1 Press Rcvd calls, [d], or [B] to enter the Caller List. 2 missed calls Rcvd Phone Kcalls book L 2 missed calls dB=Scroll list KAll
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 37
    Before erasing all entries, make sure that you have viewed all missed calls. 1 Press Rcvd calls, [d], or [B] to enter the Caller List. Rcvd Kcalls Phone book L 2 Press All erase. 0 missed call dB=Scroll list KAll erase 3 Press Yes. • All entries in your Caller List are erased. All erase? KNo
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 38
    erased. To erase all of the digits, press and hold f. • If a pause is required when dialing, press P. A pause is stored in a phone number as one digit (p. 49). Enter phone no. PL Example 5557654321| Kf d=Next PL 5 Press [d]. • If you want to change the name, press Edit. The display returns to step
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 39
    Telephone System Phone Book Selecting characters to enter names Enter names using the dialing buttons. Press each button until the desired character is displayed. • Pressing each button selects a
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 40
    and then [d]. When finished, press [OFF]. • To quickly search the desired item, press [d] or [B] after step 1. To search for a name by initial 1. Press Phone book. 2. Press Search. 3. Press the dialing button for the first letter of the desired name until any name with the same initial is displayed
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 41
    in the phone book, then manually or automatically dial your PIN and then automatically dial the destination number from the phone book. Ex phone number is dialed. • If required, repeat steps 1 to 4 for any remaining numbers. Alan 1-555-012-3456 KBack CallL • If you have rotary or pulse service
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 42
    name (p. 39), then press [d]. • If you do not need to change the name, press [d] then go to step 5. Jane Walke|r Kf d=Next gL 5 Edit the phone number, then press [d]. 5553456789| • If you do not need to change the number, press [d] then go to step 6. Kf d=Next PL • Each time you press
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 43
    indicator lights. • The handset will ring for 1 minute. • To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM]. 2 When the paged party answers, talk into the MIC. 3 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/ INTERCOM]. • The indicator light goes out. During an intercom call: • If
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 44
    flashes rapidly. 1 Press [C], [s] or [HOLD/INTERCOM]. • You can also answer a call by pressing any button except [d], [B] or [OFF]. Call from is being paged, it rings. 1 Press [SP-PHONE] or [LOCATOR/INTERCOM]. 2 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/ INTERCOM]. • When the ringer
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 45
    press [C] or [s] to return to the outside call. Line on hold. Transfer to KBase Hold Calling Base 2 Base unit: Press [SP-PHONE] or [LOCATOR/INTERCOM] to answer the page. 3 Handset: To complete the transfer, press [OFF]. From the Base Unit to the Handset 1 Base unit: During a call, press [LOCATOR
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 46
    hang up. • The call will be transferred directly. • The paged party can answer the transferred call by pressing [C], [s] or [SP- PHONE]. • After the paged party answers, the transfer is complete. • If the paged party does not answer: -for the handset, press [C] or [s] to return to the outside call
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 47
    press [LOCATOR/INTERCOM]. • The call is put on hold. 2 When the paged party answers, press [HOLD/CONF] on your unit to make a conference call. • To leave the conference, press [OFF] on the handset or press [SP-PHONE] on the base unit. The two other parties can continue the conversation. •
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 48
    to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the dialing mode Unit Press [MUTE]. • The SP-PHONE indicator flashes. • To release the mute, press [MUTE] again. For Call Waiting Service Users Handset Base Unit Press [FLASH/CALL
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 49
    . Line access number [9] (PBX) KClear PauseL [9] N Pause or P N Phone number OR • Pressing Pause or P once creates a 3.5 second pause. 9P15551234567 PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 50
    Special Features Incoming Call Tone Handset Base Unit During an intercom call (p. 43), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 51
    Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Scroll to "Key tone" by pressing [d] or
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 52
    can also turn on the Answering System remotely from an outside phone (p. 61). • If you subscribe to Caller ID (p. 30), Caller ID information automatically adjusts the date and time when a call is received, provided you have already set the date and time manually (p. 14). Handset 1 Press [MENU
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 53
    the base unit speaker. • To increase the speaker volume while monitoring, press VOLUME [>]. To decrease the volume, press VOLUME [
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 54
    will announce the remaining recording time if it is less than 3 minutes. • If a call is received during playback, the unit rings and playback stops. To answer the call, press [SP-PHONE]. For playback, start again from the beginning after hanging up. 54
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 55
    Message play KBack dB SelectL MENU=Call back @4 =Erase msg KRepeat SkipL • If a call is received during playback, the unit rings and playback stops. To answer the call, press [C] or [s]. For playback, start again from the beginning after hanging up. • At the end of the last message, "End of final
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 56
    Listening to Messages For Caller ID service users (p. 30) During playback using the handset, Helen 1-555-777-8888 KEdit CallL • The unit stops playback and dials the phone number. • If you need to edit the phone number to call back, see page 34. During playback Base Unit Handset To adjust
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 57
    you want to erase is being played. • The unit beeps, then plays back the next message. • To exit playback mode, press [STOP]. [ERASE] Handset ANSWER ON Indicator Press [*] [4] while the message you want to erase is being played. • The unit beeps, then plays back the next message. • To exit
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 58
    again." is announced, start again from step 1. Remote Operation from a Touch Tone Phone While outside, you can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 60). • To skip the voice menu and operate the unit directly
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 59
    Remote Operation from a Touch Tone Phone Remote Code Handset The remote code prevents remote code (00-99). 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Remote code KBack dB SelectL Remote code :11 KBack SaveL To confirm the remote code,
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 60
    Remote Operation from a Touch Tone Phone Voice Menu The shaded parts are voice prompts. Press [1]. Press 1 to play back all messages. All Message Playback. Press 2 for other functions. Press [2]. All recorded messages are played back. At
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 61
    Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the up or enter the remote code for other options. • When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options. Skipping the greeting After
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 62
    Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the hook and turn it 4 upward. • Fasten the AC adaptor cord to prevent it from being disconnected. 5 To charge the handset battery: Rest the handset on the charge contacts (1), then push the top of the handset so the hook snaps
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 63
    belt clip To remove the belt clip Shoulder Rest Attachment Use the shoulder rest attachment if you need to keep your hands free during a phone conversation. To attach the shoulder rest To remove the shoulder attachment rest attachment Attach the included belt clip to the handset (see above
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 64
    Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2. Connecting an optional
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 65
    Direct Commands Handset After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys. Menu item Ringer volume Ringer tone (for handset) Incoming call tone (for handset) Message play Date and time Voice enhancer Activate Caller
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 66
    Direct Commands Menu item Set line mode Number of rings Recording time Remote code Recording mode Change language Message alert Ringer tone (for base unit) Incoming call tone (for base unit) Talking Caller ID (for base unit) Command Selection items Page [0] [5] [3] [1] : A [2] : B p. 16 [0]
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 67
    mode. To erase other items from the phone book, see page 42. System is busy. Please try again later. • The handset has lost communication with the base unit. Walk closer to the base unit and try again. • The Answering System is in use, such as answering a call or playing back messages. Try again
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 68
    Troubleshooting If the handset display shows error messages, see "If the Following Appear on Your Display..." (p. 67) for the Cause & Remedy. Telephone System Problem display is blank, fully charge the battery (p. 10). You cannot program any To answer the call, press [C], [s] or [SP-PHONE]. Start
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 69
    Troubleshooting Problem Cause & Remedy You cannot redial. • If the last number dialed was more than 48 digits long, the number will not be redialed correctly. You cannot make long distance calls. • Please make sure you have long distance service ID supports names List/incoming phone numbers.
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 70
    Troubleshooting Problem The handset display exits the Caller List or phone book. The Ringer/Message Alert connected properly (p. 64). • If "SP-phone" is displayed on the handset, press [C] to switch to the headset. Answering System Problem The Answering System is on, but incoming messages are not
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 71
    Troubleshooting Problem Cause & Remedy You cannot erase messages. • While another user is operating the Answering System or a caller is leaving a message, you cannot erase messages. When you play back messages or turn on the Answering System, the handset and/or base unit announces the wrong day
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 72
    Troubleshooting Problem Cause & Remedy The CHARGE indicator does not go out after the battery has been charged. • This is normal. If you cannot solve your problem • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call our
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 73
    regarding the openLCR service, call openLCR's customer service department at 1-866-openLCR(1-866-673-6527). • NEITHER PANASONIC COMMUNICATIONS CO., LTD . Turning Caller IQ on or off Handset After the first download to your phone, Caller IQ features are automatically turned on. If you wish, you can
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 74
    openLCR Service for Caller IQ Downloading Data You can download the following data to your unit from the openLCR web site. • Phone book data 3 Follow the on-screen instructions. Phone book data: • To create the phone book data, enter a name of up to 16 characters, and a phone number of up to 32
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 75
    ("To download data from openLCR"). • You cannot access the openLCR server if a telephone or fax machine on the same phone line is in use. • While the unit is downloading data from openLCR, the Call Waiting Service cannot be used. For assistance, please call openLCR: 1-866-openLCR(1-866-673-6527) 75
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 76
    openLCR Service for Caller IQ To use downloaded melodies as the ringer tone The melody(ies) you download from openLCR are stored in the base unit and
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 77
    unit. Take the unit to an authorized servicenter when service is required. Opening or removing covers may expose you cordless types. There may be a remote risk of an electric shock from lightning. 14. Do not use this unit to report a gas leak, when in the vicinity of the leak. SAVE THESE INSTRUCTIONS
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 78
    and/or conductor may overheat and cause burns. 5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 79
    part of trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Servicenter or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 80
    B digital device, pursuant to Part 15 of the FCC Rules. in accordance with the instructions, may cause harmful interference radio/TV technician for help. Some cordless telephones operate at frequencies that may cause CFR Section 68.316. When you hold the phone to your ear, noise might be heard in
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 81
    regulations posted in the area instruct you not to do trouble - disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 82
    175 mm x 200 mm (3 11/32" x 6 7/8" x 7 7/8") Mass (Weight): Approx. 470 g (1.04 lb.) n Handset Power Supply: Ni-MH battery (3.6 V, 830 mAh) Frequency: 2.4 GHz - 2.48 GHz Dimensions (H x W x D): Approx. 208 mm x 52 mm x 39 mm (8 3/16" x 2 1/16" x 1 17/32") Mass (Weight): Approx. 190 g (0.42
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 83
    calls, base unit. . . . . . 29 Answering calls, handset 29 Answering System 52 Auto Talk 16, 29 B Backlit LCD 27 Base unit location 3 Battery charge 3, 10 -Battery information 11 Battery replacement 11 Battery strength 10 Belt clip 63 C -Call monitoring 53 Call share 47 Call Waiting
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 84
    Safety instructions 77 Shipping product for service Back Cover Shoulder rest attachment 63 Soft keys 8 Specifications 82 SP-phone, base unit 28 SP-phone, handset 25 T -Talking Caller ID 31 Toll saver 23 -Transferring a call 45 Troubleshooting, Answering System 70 Troubleshooting, general
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 85
    -in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 86
    Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/support or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly
  • Panasonic KX-TG2356PW | 2.4 Ghz Dig.crdless.ans Sys. - Page 87
    For product service • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call us at and adequately insured. • Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
2.4 GHz Digital Cordless Answering System
Operating Instructions
Model No.
KX-TG2356
Pulse-or-tone dialing capability
The unit is Caller ID compatible. To display the caller’s name and phone number,
you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web address:
for customers in the USA or Puerto Rico
Charge the battery for 6 hours before initial use.