Panasonic KXFPC161 KXFPC161 User Guide

This document is a text description of the control panel

layout for the product listed below.

“PDF” files of the complete operating instructions are

available from the Customer Support section of

www.Panasonic.com.

If you need the operating instructions in an alternate

format, please request it from Customer Support.

Compact Plain Paper Fax

with Cordless Phone

Model

Number KX-FPC161

Finding the Controls

Handset

With the handset facing you, the antenna is a narrow, 2-and-a-half inches long protrusion at the top right.

Just below the top, on the front of the handset is a shallow circular concave. This is the earpiece. Below

the earpiece are three buttons in a horizontal row: the circular one on the left is the TALK button, the

middle one is the AUTO button, and the right one is the DIRECT button. Below these buttons is the

telephone keypad laid out in the conventional telephone arrangement with a “nib” on the 5 button.

Immediately below the keypad are four circular buttons in a horizontal row: from left to right, REMOTE

SPEAKER-PHONE, FLASH, LOUD and REDIAL. The LOUD button is also the RINGER button. The

REDIAL button is also the PAUSE button. Below the REMOTE SPEAKER-PHONE button is the

PROGRAM button. Below the REDIAL button is the FAX button. Below the FAX button is the

CHANNEL button. The 3 metal ridges at the bottom of the handset are the charge contacts. The headset

jack is on the right side edge of the handset, at almost the same height as the top row of the buttons. It has

a rubber cover that is opened from front to back, and is not completely removable.

Base unit

With the base unit facing you, the antenna should be straight up on the left side, towards the back of the

unit. The handset's charging cradle is on the left of the base unit. This is a deep depression near the front.

For charging, the bottom of the handset gets put into the cradle with the handset buttons facing up.

The handset must be placed in the cradle in an upright position. The unit will beep when the handset is

properly placed in the cradle for charging.

The control panel of the base unit is divided into three equal parts: left, middle, and right.