Panasonic KXTG365SK KXTG365SK User Guide - Page 54
Using Bluetooth Devices, Pairing a headset to the base unit, Operating a Bluetooth wireless
View all Panasonic KXTG365SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using Bluetooth Devices Pairing a headset to the base unit Important: R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Your headset: Set your headset to pairing mode. R Refer to the headset operating instructions. 2 Handset: MMENUN#621 3 If your headset PIN is "0000", go to step 4. If your headset PIN is other than "0000", press MCLEARN, then enter your headset PIN. R Typically, default PIN is "0000". Refer to the headset operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When is displayed on the base unit, the headset is available for use. Connecting/disconnecting a headset If you cannot connect the headset and base unit using the headset, you can connect using the unit. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on. Handset / Base unit 1 To connect/disconnect: MMENUN#622 R A long beep sounds. 2 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Unpairing a headset You can cancel a pairing of the headset that is stored to the base unit. Handset 1 MMENUN#612 2 MbN: "Yes" a MSELECTN R When the headset is unpaired, the disappears from the base unit display. 3 MOFFN Operating a Bluetooth wireless headset using a landline Important: R Refer to your headset operating instructions for headset operations. Answering landline calls with your headset To answer a landline call, turn on your headset referring to your headset operating instructions. When you finish talking, turn off your headset referring to your headset operating instructions. Note: R If you cannot hang up the call using your headset, press MZN on the base unit 2 times. Switching between the base unit and your headset You can switch between the base unit and your headset: - during a landline call with the base unit speakerphone. - during an intercom call between the base unit and handset. - while listening to messages recorded on the base unit answering system. n To switch to your headset: Press M N on the base unit. n To switch to the base unit: Press MZN on the base unit. 54 For assistance, please visit http://www.panasonic.com/help