Panasonic KXTGA246W 2.4g Cdl Tot2hs

Panasonic KXTGA246W - 2.4G HS FOR TG 2422W Manual

Get Panasonic KXTGA246W - 2.4G HS FOR TG 2422W PDF manuals and user guides View all Panasonic KXTGA246W manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic KXTGA246W manual content summary:

  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 1
    Instructions 2.4 GHz Digital Cordless Phone Model No. KX-TG2421 2.4 GHz Digital Cordless Phone with Dual Handsets Model No. KX-TG2422 This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the battery
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 2
    Chain dial feature 23 Copying phonebook items (KX-TG2422 only 23 Copying an item 23 Copying all items 24 Caller ID Service Using Caller ID service 25 Caller list 26 Viewing the caller list and calling back 26 Editing a caller's phone number before calling back 27 Storing caller information
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 3
    42 Charger unit (KX-TG2422 only) . . . . 44 Error messages 45 Troubleshooting 46 General use 46 Programmable settings 46 Making/answering calls, Intercom . . 47 Phonebook 47 Caller ID 48 Battery charge 49 Power failure 49 Important information about subscription services 50 FCC and other
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 4
    . Energy Star: As an ENERGY STAR® Participant, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark. Your phone KX-TG2421 KX-TG2422 L References in these operating instructions to the "charger" and to the "other
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 5
    KX-TG2422 1 2 1 1 1 1 1 2 1 2 1 - - 1 1 2 3 4 5 6 7 Additional/replacement accessories Accessory items Order number Rechargeable nickel metal HHR-P105 hydride (Ni-MH) battery Headset (KX-TG2421 only) KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 6
    or water. D. If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center. E. If the unit has been dropped or physically damaged. F. If the unit
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 7
    (ies) and/or the conductive material to overheat and cause burns. L Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. WARNING: L To prevent the risk of fire or electrical shock, do not
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 8
    noise-free operation, we recommend the following: L Placing the unit away from electrical appliances such as a TV, personal computer or another cordless phone. L Placing the base unit in a HIGH and CENTRAL location with no obstructions such as walls. L Raising the antenna vertically. L If you use
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 9
    the AC adaptor cord. Hooks To single-line telephone jack (RJ11C) Telephone line cord To power outlet (120 V AC, 60 Hz) AC adaptor Charger unit (KX-TG2422 only) To power outlet (120 V AC, 60 Hz) AC adaptor Hooks Bottom of the charger Fasten the AC adaptor cord to prevent it from being
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 10
    telephone line or to the same telephone jack using the Panasonic KX-J66 Tadaptor. Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 5. If you subscribe to an xDSL service L Please attach a noise filter (contact your xDSL provider) to the
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 11
    The CHARGE indicator will remain lit. Base unit CHARGE indicator Charger unit (KX-TG2422 only) Battery strength You can confirm the battery strength on the handset display. Battery icon 5 6 7 8 Battery strength Fully charged Medium Low When flashing: needs to be recharged. Discharged Recharging
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 12
    needs to be replaced if any of the following are displayed after a few phone calls even when you have fully charged the battery. - "Recharge battery" - 7 (flashing) - "Charge for 6h" -8 L Use only the rechargeable Panasonic battery noted on page 5. 1 Press the notch on the cover firmly and slide it
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 13
    Controls and displays Controls Base unit KX-TG2421 A B KX-TG2422 A Preparation B C DE A Antenna B IN USE indicator C Charge contacts D CHARGE indicator E {HANDSET LOCATOR} F {HANDSET LOCATOR 1} G {HANDSET LOCATOR 2} C D FG For assistance, please call 1-800-211-PANA (7262). 13
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 14
    O E P F G H I J KX-TG2421 KX-TG2422 O {OFF} P {MUTE} {CLEAR} Q {HOLD} R {HOLD} {INTERCOM} Charger unit (KX-TG2422 only) A B A Charge contacts B Q R A Speaker B Soft key C Headset jack (KX-TG2421 only) D {C} (TALK) E Navigator key F {s} (SP-PHONE) G {*} (TONE) H {PAUSE}{REDIAL} I Microphone
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 15
    Displayed item Meaning J Voice enhancer is on. 5 Battery strength Soft keys The handset features 2 soft keys. Phone book L Soft key examples: Display function Action Rcvd calls Enters caller list VM Dials Voice Mail access number Conf Establishes a conference call*1 *1 KX-TG2422
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 16
    the handset on the base unit or charger. Note: L "Line in use" is displayed when someone is talking on the other handset (KX-TG2422 only) or another phone. To adjust the receiver volume 3 levels (high/medium/low) are available. While using the receiver, press {V} or {^} repeatedly. To use the
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 17
    To make a call using the redial list The last 5 phone numbers dialed are stored in the redial list. 1 Press {REDIAL}. L The last number dialed will be displayed. 2 Press {V} or {^} repeatedly to display the desired number. L
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 18
    {C} or {s}. L The other handset user can take the call by pressing {C} or {s}. Note: L "Line on hold" will be displayed on the other handset (KX-TG2422 only). L If another phone is connected on the same line (page 10), you can also take the call by lifting its handset. L If a call is kept on hold
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 19
    on the display. Note: L If this feature is turned off manually during a call, it will not be turned on automatically during the same call. L While this feature is turned on, battery operating time will be shortened (page 12). Call share (KX-TG2422 only) When the other handset is on an outside call
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 20
    users To use Call Waiting, you must subscribe to your telephone company's Call Waiting service. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a Call Waiting tone. Press {Flash} to answer the 2nd call
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 21
    manually. You can add 50 names and phone numbers to the handset phonebook and search for phonebook entries by name. Adding items to the phonebook 1 Press {Phonebook}. Rcvd Kcalls Phone Enter name | KBack NextL 4 Press {Next}. 5 Enter the phone number (max. 32 digits). L If a pause is required
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 22
    =Scroll list 3 Press {V} or {^} repeatedly to display the desired item. L To exit the phonebook, press {OFF}. 4 Press {C}, {s}, or {Call}. Note: L To view a phone number over 16 digits long, follow steps 1 to 3, then press {Edit} and {Next}. Press {OFF} when finished. To search for a name by initial
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 23
    Chain dial feature This feature allows you to dial phone numbers from the phonebook while you are on a you have rotary or pulse service, you need to press {*} before pressing {MENU} in step 1 to change the dialing mode temporarily to tone. Copying phonebook items (KX-TG2422 only) You can copy one
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 24
    Phonebook Copying all items 1 Press {MENU}. 2 Scroll to "Copy phonebook" by pressing {V} or {^}, then press {>}. 3 Scroll to "Copy all items" by pressing {V} or {^}, then press {>}. L When all items have been copied, "Complete" will be displayed. L The destination handset display will show "
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 25
    the oldest. L When Caller ID information is received and it matches a phone number stored in the phonebook: - The stored name will be displayed and ": The caller dialed from an area which does not provide Caller ID service. "Private caller": The caller requested not to send caller information. "
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 26
    Calling back will not be possible if the caller information does not include a phone number. L In some cases, you may have to edit the number before dialing. (For example, you may have to delete "1" and the area code.) L KX-TG2422 only: Each handset has its own caller list. If you viewed the caller
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 27
    automatically. This feature can be turned on or off (page 36). The default setting is ON. Caller ID Service Note: L The handset can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited. L This feature will not be activated
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 28
    Caller ID Service Erasing caller information Erasing a selected item 1 Press {V} or {^} to enter the caller list. 2 Press {V} or {^} repeatedly to display the desired item. 3 Press {CLEAR}. L To erase
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 29
    Handset: To stop paging, press {OFF}. Intercom (KX-TG2422 only) Intercom calls can be made between 2 handsets. Note: L If you have difficulty hearing the other party while using the speaker, decrease the speaker volume. L If you receive a phone
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 30
    call will ring at your handset again. If you still do not answer the call within 4 minutes, the call will be disconnected. Conference calls (KXTG2422 only) A conference call allows 2 handsets to speak together with an outside party. 1 During an outside call, press {INTERCOM}. L The call will be put
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 31
    recorded. The default setting is ON. Turn this feature off when: - You do not subscribe to Voice Mail service. - Your telephone company does not send Voice Mail tones. - Your phone is connected to a PBX. If you are not sure which setting is required, consult your telephone company. For assistance
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 32
    pre-recorded instructions. 3 service uses Voice Mail tones, the tones will be heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually battery operating time will be shortened (page 12). 32 For
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 33
    Guide - page 35 - page 23 Copy all items - page 24 Customer support Initial setting - Voice Mail - Store VM access#*2 VM tone detect*2 handsets, you will not need to program the same item using the other handset (KX-TG2422 only). Note: L To exit programming, press {OFF} at any time. L To
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 34
    not ring. 5 Press {Save}, then press {OFF}. Note: L If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (Tone 1 to 3). If you select a melody, you will the call using another phone connected on the same line. 34 For assistance, please call 1-800-211-PANA (7262).
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 35
    Programmable Settings Handset interrupt tone (KXTG2422 only) This tone lets you know when you receive or "Off". 5 Press {Save}, then press {OFF}. Note: L If you subscribe to Caller ID service and want to view the caller's information on the handset display after lifting up the handset to answer a
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 36
    Programmable Settings Caller ID edit You can turn the Caller ID number auto edit feature (page 27) on or off. The default setting is ON. 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Caller ID edit" by pressing {V} or {^}, then press {>}. 4 Press
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 37
    settings Dialing mode If you cannot make calls, change this setting depending on your telephone line service. "Tone" (default): For tone dial service. "Pulse": For rotary pulse dial service. 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set tel
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 38
    base unit near each other when re-registering the handset. L KX-TG2422 only: Confirm the extension number of the handset which has instructions for this product using your computer. 1 Press {MENU}. 2 Scroll to "Customer support" by pressing {V} or {^}, then press {>}. L "www.panasonic.com/support
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 39
    Programmable Settings Programming via direct commands You can also program most features using "direct commands"-special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit's menus. Details of each
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 40
    31. {1}: On {0}: Off {1}: English {2}: Spanish {1}: On {0}: Off Go to step 4 on page 38. Page page 31 page 31 page 36 page 32 page 38 *1 KX-TG2422 only Note: L If you make a mistake or enter the wrong code, press {OFF} then start again by pressing {MENU}. 40 For assistance, please call 1-800
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 41
    Belt clip (KX-TG2421 only) You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip Headset (optional, KXTG2421 only) Connecting an optional headset to the handset allows hands-free phone conversations. Please use only a Panasonic headset. See
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 42
    Useful Information Wall mounting Base unit The base unit can be mounted on a wall phone plate. 1 Connect the AC adaptor and the telephone line cord. To power outlet Fasten the AC adaptor cord. Hooks 2 Insert the hooks on the wall
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 43
    Useful Information 3 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 4 Connect the telephone line cord. Mount the unit, then slide it down. L Raise the antenna. To remove the wall mounting adaptor While pushing down the release levers
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 44
    Useful Information Charger unit (KX-TG2422 only) The charger can be wall mounted, as shown below. 1 Connect the AC adaptor. 2 Drive the screws (not included) into the wall using the wall
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 45
    Useful Information Error messages If the unit detects a problem, one of the following messages will be displayed on the handset. Display L You have not stored the Voice Mail access number. Store the number (page 31). *1 KX-TG2422 only For assistance, please call 1-800-211-PANA (7262). 45
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 46
    Troubleshooting General use Problem The unit does not work. The display shows "No link to base. Move closer to base, try again." and an alarm tone sounds. I cannot hear a dial tone. Cause & solution L Make sure that the battery operates properly, contact our service personnel to have the unit
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 47
    L If "SP-phone" is displayed on the handset, press {C} to switch to the headset. L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called handset is in use. Try again later. Phonebook Problem I cannot
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 48
    Problem The handset does not display the caller's name and/or phone number. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone L If your unit is connected to a telephone line with xDSL service, we recommend connecting a noise filter between the base unit and
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 49
    may need to be replaced (page 12). If you install a new battery, fully charge it (page 11). L This is normal. L Confirm that the battery is properly installed. L Fully charge the battery (page 11). Power failure Problem The unit will not function. Cause & solution L This product is not designed
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 50
    Caller ID, Call Waiting, Call Waiting Caller ID (CWID), or Voice Mail, you must first contact your telephone company and subscribe to the desired service. L For more information, contact your telephone company. If the Call Waiting Caller ID (CWID) feature does not function: L You may need to contact
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 51
    . If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Servicenter or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 52
    accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 53
    and must be avoided. The base and handset units must not be co-located or operated in conjunction with any other antenna or transmitter. Note: L KX-TG2422 is not included a belt clip. Useful Information For assistance, please call 1-800-211-PANA (7262). 53
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 54
    Approx. 107 g (0.24 lb.) Power supply: Ni-MH battery (2.4 V, 830 mAh) Security codes: 1,000,000 Charger unit (KX-TG2422 only) Operating environment: 5 °C - 40 °C (41 to change without notice. L The illustrations in these instructions may vary slightly from the actual product. 54 For assistance
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 55
    Instructions) does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic date is required for warranty service. To obtain service in the USA please contact: Panasonic Services Company, Panasonic Plus Department 20421 84th Avenue
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 56
    period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 57
    Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: [email protected] You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 58
    Base unit location: 8 Battery Charge: 11 Installation: 10 phonebook: 23, 24 Customer support: 38 D Dialing mode: 37 service: 20 R Redial: 16 Redial list: 17 Registration: 38 Ringer Tone: 34 Volume: 34 Ringer off: 17, 34 Rotary service, tone dialing: 20 S Safety instructions: 6 Soft keys: 15 SP-phone
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 59
    Troubleshooting Battery charge: 49 Caller ID: 48 General use: 46 Making/answering calls, Intercom: 47 Phonebook: 47 Power failure: 49 Programmable settings: 46 TTY: 5 V VE (voice enhancer):
  • Panasonic KXTGA246W | 2.4g Cdl Tot2hs - Page 60
    a letter, detailing the symptom, to the outside of the carton. L Send the unit to Panasonic Services Company Customer Servicenter, prepaid and adequately insured. L Do not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
This unit is compatible with Caller ID. To use this feature, you must
subscribe to the appropriate service offered by your service provider.
Please read these Operating Instructions before using the unit and save
for future reference.
For assistance, visit our website:
for
customers in the U.S.A. or Puerto Rico.
Charge the battery for 6 hours before initial use.
2.4 GHz Digital Cordless Phone
Model No.
KX-TG2421
Operating Instructions
2.4 GHz Digital Cordless Phone
with Dual Handsets
Model No.
KX-TG2422
Model shown is KX-TG2421.