Panasonic KXWT126 KXWT125 User Guide - Page 70
The CO Status Display, No Service, CO Status Disp, Setting, Handset
View all Panasonic KXWT126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Troubleshooting and Error Messages Problem Possible Cause Solution "No Service" is displayed, and beep tones are heard. The handset is out of range. The CS or PBX is out of service. The CO Status does not appear. The CO Status Display is not displayed in standby mode or when receiving a call as a member of a PS ring group. • Single CO numbers are not displayed on the soft keys. • Single CO numbers are not displayed on the Line menu. • The software version of the PBX/CS/card does not support this feature. • The "CO Status Display in Standby" setting on the PBX is not enabled. • The Single CO line registered in the "Single CO Appearance" setting on the PBX is not valid. • The "CO Status Disp" setting in "Setting Handset" is set to "Off". (See "Display Option" on page 62.) Move closer to the CS or try again later. Consult your dealer. Consult your dealer. 70