Panasonic KXWT126 KXWT125 User Guide - Page 71
The Single CO line, See Display Option
View all Panasonic KXWT126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Troubleshooting and Error Messages Problem Possible Cause Solution • The CO Status Display is displayed as "-" in standby mode or when receiving a call as a member of a PS ring group. • During operation, the CO Status Display is not displayed correctly, such as being displayed as "-". In standby mode, the status of CO lines is not displayed on the soft keys. • The software version of the PBX/CS/card does not support this feature. • The "CO Status Display in Standby" setting on the PBX is not enabled. • The Single CO line registered in the "Single CO Appearance" setting on the PBX is not valid. • The "CO Status Disp" setting in "Setting Handset" is set to "Off". (See "Display Option" on page 62.) Consult your dealer. 71
Troubleshooting and Error Messages
71
Problem
Possible Cause
Solution
•
The CO Status
Display is
displayed as
"‑" in standby
mode or when
receiving
a call as a
member of a
PS ring group.
•
During
operation, the
CO Status
Display is
not displayed
correctly,
such as being
displayed as
"‑".
•
The software version of
the PBX/CS/card does
not support this feature.
•
The “CO Status Display
in Standby” setting on
the PBX is not enabled.
•
The Single CO line
registered in the “Single
CO Appearance” setting
on the PBX is not valid.
•
The “
CO Status Disp
”
setting in “
Setting
Handset
” is set to
“
Off
”.
(See “Display Option”
on page 62.)
Consult your dealer.
In standby
mode, the status
of CO lines is
not displayed on
the soft keys.