Home » Panasonic Manuals » Projectors » Panasonic PT-D5700U » Manual Viewer

Panasonic PT-D5700U User Manual

Panasonic PT-D5700U - XGA DLP Projector Manual

UPC - 791871111482

View all Panasonic PT-D5700U manuals

Add to My Manuals
Save this manual to your list of manuals

Panasonic PT-D5700U manual content summary:

Panasonic PT-D5700U | User Manual - Page 1
Operating Instructions DLP® Based Projector Commercial Use PT-D5700U Model No. PT-D5700UL PT-DW5100U PT-DW5100UL Read these instructions completely before operating this unit. TQBJ0219
Panasonic PT-D5700U | User Manual - Page 2
will be pleased with your Panasonic DLP® based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL Serial number: IMPORTANT
Panasonic PT-D5700U | User Manual - Page 3
void the user's authority to operate. WARNING: Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. Declaration of Conformity Model Number: PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL Trade Name: Panasonic
Panasonic PT-D5700U | User Manual - Page 4
14 Effective range of remote control operation 14 Setting projector ID number to remote control 15 Connect to the projector to use with a cable 15 Installation 16 Projection schemes 16 Installation geometry 16 Projection distance by projection lens 17 Calculation formulas for projection
Panasonic PT-D5700U | User Manual - Page 5
result. Do not look into the lens while the projector is being used. • Strong light is emitted from the projector's lens. If you look directly into this electric shocks, short-circuits or fire may result. • Ask an Authorized Service Center to carry out any repairs to the power cord that might be
Panasonic PT-D5700U | User Manual - Page 6
advice immediately. Remove empty batteries from the remote control at once. • Do not leave to leak, overheat or explode. Before replacing the lamp, be sure to disconnect the power cord plug from all cables before moving the projector. • Moving the projector with cables still attached can damage
Panasonic PT-D5700U | User Manual - Page 7
fingers between the lens and shroud when shifting the lens as it may cause injury. Ask an Authorized Service Center to clean inside the projector at least once a year. • If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation. • It
Panasonic PT-D5700U | User Manual - Page 8
an Authorized Service Center for installation. Install the projector so that it will be supported only by • The life cycle of a mercury lamp varies according to the individual difference or its instructions. Do not clean the lens surface with fuzzy or dusty cloth. If dust adheres to the lens, it
Panasonic PT-D5700U | User Manual - Page 9
and function of parts Remote control Remote control operation indicator lamp The lamp flashes when any remote control button is pressed. more than one projector is being used. They are used to enter ID numbers when selecting an ID, and they are also used by service personnel for entering passwords
Panasonic PT-D5700U | User Manual - Page 10
SHIFT) buttons (page 26) These buttons are used to adjust the projection lens. Function 1 (FUNC1) button (page 37) This button can control the or more main units are used in the system, this button specifies the ID of the remote control. ID ALL button (page 15) When two or more main units are used
Panasonic PT-D5700U | User Manual - Page 11
unusual occurs in the lamp circuit. Power indicator (page 24) The lamp lights in red when the MAIN POWER switch is turned to "l" (on). It turns to green when the POWER ON button of the remote control or the main unit is pressed. Lens cap Cap the lens whenever the projector is left unused. Air
Panasonic PT-D5700U | User Manual - Page 12
Lamp unit cover The lamp unit is housed. MAIN POWER switch (page 24) Use this switch to turn on "I" and off "O" the main power applied to the projector. Remote your menu selection or to run function. LENS button (page 26) Switches to the adjustment mode for lens focus, zoom and shift (position).
Panasonic PT-D5700U | User Manual - Page 13
used to control the projector from the PC. (10BASE-T/100BASE-TX compliant) LAN terminal (10BASE LAN 10/100 lamp (Yellow) Lights up when 100BASE-TX connected. LAN LINK/ACT lamp (Green) Lights up in the market. REMOTE2 IN terminal (page 53) The user can remotely control the main unit by using an external control circuit
Panasonic PT-D5700U | User Manual - Page 14
control may not function properly if an object is in the light path. • The remote control receiver may not function properly in intense ambient light such as fluorescent lamps. Carefully site the projector so its remote control receiver windows will not be directly exposed to intense light. 14
Panasonic PT-D5700U | User Manual - Page 15
ID number of the controlling projector must be set to the remote control in advance so that the user can operate the remote control. The ID number of the projector is set to "ALL" on shipping, and use the ID ALL button of the remote control when using only a single projector. Procedure of ID setting
Panasonic PT-D5700U | User Manual - Page 16
the figure below and the information on the next page for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens tilt mechanism. REAR Side view Top view unit : mm, ( ) : inch SH 417-497 (16
Panasonic PT-D5700U | User Manual - Page 17
Projection distance by projection lens Listed in the table below are the lens projection distances for the PT-D5700U (lens included), PT-D5700UL (lens sold separately), PT-DW5100U (lens included) and PT-DW5100UL (lens sold separately). • PT-D5700U, PT-D5700UL Screen aspect ratio 4:3 Unit : m, ( )
Panasonic PT-D5700U | User Manual - Page 18
Installation • PT-D5700U, PT-D5700UL Screen aspect ratio 16:9 Unit : m, ( ) : inch, [ ] : foot Lens type Model number of projection lens Throw ratio*1 Projection screen size Standard zoom lens (1.8-2.5:1) Wide-angle fixed-focus lens ET- DLE050 (0.8:1) Optional lens Wide-angle Intermediate-
Panasonic PT-D5700U | User Manual - Page 19
PT-DW5100UL Screen aspect ratio 15:9 Unit : m, ( ) : inch, [ ] : foot Lens type Model number of projection lens Throw ratio*1 Projection screen size Standard zoom lens (1.8-2.5 :1) Wide-angle fixed-focus lens ET- DLE050 (0.8:1) Optional lens Wide-angle Intermediate-focus Long-focus zoom lens
Panasonic PT-D5700U | User Manual - Page 20
Installation • PT-DW5100U, PT-DW5100UL Screen aspect ratio 16:9 Unit : m, ( ) : inch, [ ] : foot Lens type Model number of projection lens Throw ratio*1 Projection screen size Standard zoom lens (1.8-2.5 :1) Wide-angle fixed-focus lens ET- DLE050 (0.8:1) Optional lens Wide-angle Intermediate
Panasonic PT-D5700U | User Manual - Page 21
formulas for projection distance by lens types • PT-D5700U, PT-D5700UL Lens type Standard zoom lens Wide-angle fixed- Model No. : focus lens ET-DLE050 Wide-angle zoom lens Model No. : ET-DLE100 Intermediate-focus Model No. : zoom lens ET-DLE200 Long-focus zoom lens Model No. : ET-DLE300
Panasonic PT-D5700U | User Manual - Page 22
corrector (TBC) in the projector's video line will relieve this problem. • The projector only accepts composite-video, S-Video, analog-RGB (with TTL sync. level) and digital signal. • Some PC models are not compatible with PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL projectors. • When using long
Panasonic PT-D5700U | User Manual - Page 23
terminal R/PR G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 IN RGB 2 IN IN SERIAL OUT DVI-D IN LAN DVI-D image may be distorted. If this is the case, connect a TBC between the projector and the video deck. • The EDID settings may be needed depending on the
Panasonic PT-D5700U | User Manual - Page 24
G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 IN IN SE Powering up the projector When using an optional lens, install a projection lens before powering up the projector. (Refer to page 26.) Remove the lens cover beforehand. Connect the supplied power cord. (120
Panasonic PT-D5700U | User Manual - Page 25
even in standby mode after the cooling fan stops. (Power indicator lit in red.) • If you re-power the projector after shutting off the main power inadvertently, the projection lamp may remain unlit. Please turn the main power on again after a while. Direct power off function The power supplied
Panasonic PT-D5700U | User Manual - Page 26
in relation to the screen. At the projector Press LENS on the control panel on the main unit. Pressing the button changes the setup screen in the order of "FOCUS", "ZOOM" and "SHIFT". Press to select an item and adjust it. Using the remote control Press LENS (FOCUS/ZOOM/SHIFT) on the
Panasonic PT-D5700U | User Manual - Page 27
these automatic adjustments. In this case, manually adjust the items of "INPUT RESOLUTION", "CLOCK PHASE" and "SHIFT". • projector's status via Email. Press the STATUS button on the remote control. STATUS INPUT PROJECTOR RUNTIME LAMP1 LAMP2 INTAKE-AIR TEMP. OPTICS MODULE TEMP. TEMP. AROUND LAMP
Panasonic PT-D5700U | User Manual - Page 28
(page 38) OPTION2 PROJECTOR ID INSTALLATION ALTITUDE DIRECTION LAMP SELECT LAMP RELAY LAMP POWER RS-232C SYSTEM INFORMATION LEVEL FUNC1 OSD POSITION OSD MEMORY OFF USER NORMAL OFF BLUE OFF EDID2:PC 0-255 RESOLUTION CLAMP POSITION EDGE BLENDING RASTER POSITION XGA MODE SXGA MODE AUTO 1 OFF XGA
Panasonic PT-D5700U | User Manual - Page 29
all menus from the screen. Menu items shown in black characters • Some menu items may not be valid for certain signal formats applied to the projector. The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected. Menu items setting • The bottom prompt
Panasonic PT-D5700U | User Manual - Page 30
images take on a reddish or bluish hue. DEFAULT: This is the standard setting. USER : The RGB values of the white balance are set separately. Press the ENTER This adjusts the vividness of the projected images when the projector is used under bright lighting. OFF : "SYSTEM DAYLIGHT VIEW" is disabled. 1
Panasonic PT-D5700U | User Manual - Page 31
unit which supports the wide-screen format. *2 Here, the standard signal means 4:3 or 5:4 input signals. *3 Here, the wide-screen signals means 16:9, 15:9 or 15:10 input signals. *4 Panel pixel aspect ratio is 4:3 in the case of PT-D5700U/PT- D5700UL and 15:9 for PT-DW5100U/PT-DW5100UL. Attention
Panasonic PT-D5700U | User Manual - Page 32
phase adjustment allows the user to minimize visible noise To obtain the best picture quality, set up the projector and screen RESOLUTION CLAMP POSITION EDGE BLENDING RASTER POSITION XGA MODE SXGA MODE AUTO 1 OFF XGA SXGA MENU SELECT CHANGE DIGITAL CINEMA REALITY Increase the vertical resolution
Panasonic PT-D5700U | User Manual - Page 33
RESOLUTION Input resolution adjustment achieves the best is applied with RGB1 and RGB2 IN. EDGE BLENDING This projector has the function to hide the seams for multi-screens. . However, depending on the installation environment or the lens to be used, dotmisalignment may occur. The correction
Panasonic PT-D5700U | User Manual - Page 34
adjust the value in the vertical direction. XGA MODE This mode takes effect only when XGA (RGB) signals are input. XGA : This is the standard setting. WXGA language the user chooses. The available languages are: ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL, ITALIANO, , , , . Note • The projector's on
Panasonic PT-D5700U | User Manual - Page 35
CHANGE COLOR MATCHING When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among the sets. Press be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make
Panasonic PT-D5700U | User Manual - Page 36
SETUP button on the remote control each time signals are input when signals are input frequently such as when the projector is used at a projector. BLUE : Set screen color to blue. BLACK : Set screen color to black. LOGO1 : The picture registered by the user will be projected. LOGO2 : The Panasonic
Panasonic PT-D5700U | User Manual - Page 37
message and select. DVI EDID When the projector and external equipment are connected by DVI connection instructions for the external equipment, etc. • Depending on the setting, some equipment may not provide images or otherwise operate properly. FUNC1 The user can set the function for the remote
Panasonic PT-D5700U | User Manual - Page 38
PROJECTOR ID The projector has an ID number setting function that helps the user to control two or more projectors either simultaneously or separately with a single remote images are to be projected. Using the projector at the wrong "DIRECTION" setting will shorten the service life of the lamps. 38
Panasonic PT-D5700U | User Manual - Page 39
" modes depending on user's needs or viewing conditions. In "SINGLE" mode, the projector may automatically select either lamp from the 2 lamps, or the particular lamp can be specified. DUAL : Two lamps are used simultaneously. SINGLE : One of either lamps is used (lamp with shorter operating hours
Panasonic PT-D5700U | User Manual - Page 40
service person. Input the password with the numeric buttons (0 to 9) of the remote control and press the ENTER button to confirm the entry. Displaying the internal test pattern The projector :9 frame* 40 Window White on black ground * The PT-DW5100U and PT-DW5100UL support the 4:3 frame format.
Panasonic PT-D5700U | User Manual - Page 41
. Returning the network function setting back to the factory setting The user can return all settings of network function such as IP address, conditions. Connection example Projector Personal computer R/PR G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 IN RGB 2
Panasonic PT-D5700U | User Manual - Page 42
message when the projector has a problem Accessing from the Web browser Start the Web browser on your PC, then enter the IP address which was set in the projector. Enter "user1" in the user name field, then enter the password in the password field. The default setting is "panasonic" (all lower case
Panasonic PT-D5700U | User Manual - Page 43
appears. Monitor information button E-mail set up button Click this item, and the status of the Click this item, and an E-mail setting projector is displayed. page appears. POWER: Power On/Off control SHUTTER: Shutter control OSD (On-screen Display): display/non-display SYSTEM: Signal System
Panasonic PT-D5700U | User Manual - Page 44
the lamp2 lit hours. Displays the type of projector. Displays used hours of the projector. Error information page When is displayed on the status information screen, click it to display the error details. OK: Normal operation FAILED: Occurrence of trouble Note • Depending on the nature of the
Panasonic PT-D5700U | User Manual - Page 45
your dealer. Trouble has occurred in the color wheel or the color wheel drive circuit. Consult your dealer. The lamp unit cover is not properly fitted. Check the fitting of the lamp unit cover. (page 57) E-mail set up page With this projector, if a problem occurs or if the lamp usage time reaches
Panasonic PT-D5700U | User Manual - Page 46
days checked. Button to update settings Select the conditions for sending the second E-mail. ERROR: an error is detected by self-diagnosis. LAMP RUNTIME: remaining lamp service time has reached the value set in the field. INPUT AIR TEMPERATURE: intake air temperature has reached the value set in the
Panasonic PT-D5700U | User Manual - Page 47
the authentication method to use, as desired. Enter the POP server name. Available input characters: alphanumeric characters (A - Z, a - z, 0 - 9), hyphen (-) period (.) Enter the user name for the SMTP or POP server. Enter the password for the SMTP or POP server. Enter the SMTP server port number
Panasonic PT-D5700U | User Manual - Page 48
is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : D5700 ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] OPTICS MODULE TEMPERATURE [ OK ] INPUT AIR TEMPERATURE [ OK ] AROUND LAMP TEMPERATURE [ OK ] LAMP2 REMAIN TIME [ OK ] LAMP1
Panasonic PT-D5700U | User Manual - Page 49
. Enter the subnet mask if DHCP server is not used. Enter the gateway address if DHCP server is not used. Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance. Network status page Click
Panasonic PT-D5700U | User Manual - Page 50
Projector settings • Projector status inquiry Supported commands The commands for controlling the projector fan error; one of 0 to 2 2nd byte: Refers to lamp error; one of 0 to 2 3rd byte: Refers to temperature of "NETWORK" Responds with "Panasonic" Responds with "D5700" or "DW5100" Responds with
Panasonic PT-D5700U | User Manual - Page 51
images. PASSWORD INPUT SET (When using the projector for the first time) Press the and : The picture registered by the user will be projected. LOGO2 : The Panasonic logo is projected. TEXT CHANGE The is possible to restrict operation from the remote control and the main unit controls. CONTROL
Panasonic PT-D5700U | User Manual - Page 52
be sent or received for 10 to 60 seconds after the lamp starts lighting. Try sending any command after that period has projector will send an "ER401" response to the computer. • If an invalid command is received, the projector will send an "ER402" response to the computer. • Projector ID supported
Panasonic PT-D5700U | User Manual - Page 53
adequate communication cable that fits to your personal computer. Example of a control panel layout Remote terminal External control Remote terminal /External control STANDBY ON LAMP RGB1 VIDEO RGB2 Projector set up in a meeting room S-VIDEO DVI Control panel located in a different room
Panasonic PT-D5700U | User Manual - Page 54
monitor This projector is equipped with 3 indicators to show when a lamp needs replacement or there is an abnormal internal temperature. These lamps flash or light up to indicate a problem. Turn the power off and follow the steps below. (Power indicator) Lamp 2 monitor (LAMP 2) Lamp 1 monitor (LAMP
Panasonic PT-D5700U | User Manual - Page 55
buttons on the rear side of the main unit or on the remote control is pressed. Procedure of cleaning Turn off the main power projector, causing failure. Note • If cleaning cannot remove the dust completely, then it is a sign to replace the air filter. Consult the dealer. In addition, when the lamp
Panasonic PT-D5700U | User Manual - Page 56
environment. Therefore, it is recommended for the user to keep a spare lamp unit. The risk of the lamp bursting increases after 2 000 hours*1 of operation, so the lamp unit turns off automatically. On-screen indication Lamp monitor REPLACE THE LAMP LAMP After 1 800 hours*2 After 2 000 hours
Panasonic PT-D5700U | User Manual - Page 57
such a way that the screws in steps and will not fall through completely. Open the fan unit as shown in the figure. Handle Lamp unit 1 Caution The lamp unit will be hot after it has been used. You might get burned if you touch it while it is still hot. Remove the
Panasonic PT-D5700U | User Manual - Page 58
procedure> Install the ceiling mount bracket according to the Installation Instructions. Attach anchor nuts or curl plugs available in the market there is no slack in the Anchoring nuts wire cable provided with the projector. or curled plugs (M8 or 5/16") Wire cable Flat washer Spring washer
Panasonic PT-D5700U | User Manual - Page 59
service --- check the following points. Symptoms Power does not turn on No image Image is blurred Light color/ bad color tone Remote Is the equipment connected to the projector operating correctly? • Is the shutter function turned on? (See page 27) • Is the lens focused properly? (See page 26)
Panasonic PT-D5700U | User Manual - Page 60
PT-D5700U PT-D5700UL PT-DW5100U PT-DW5100UL Power supply Power consumption Amps DLP® panel Panel size Display system Number of pixels Lens terminal 2 bulbs x 300 W UHM lamp 6 000 lm*1 5 500 lm*1 kHz, vertically 50 Hz - 85 Hz, Panasonic Intelligent Auto Scanning (PIAS) system Dot clock frequency
Panasonic PT-D5700U | User Manual - Page 61
dimensions Mass Working environment condition Remote control Power source Operation range Mass Outside dimensions Option Hanging attachment (For high ceiling) Hanging attachment (For low ceiling) Projection lens Replacement lamp unit PT-D5700U PT-D5700UL PT-DW5100U PT-DW5100UL 1 set of high-density
Panasonic PT-D5700U | User Manual - Page 62
PT-D5700U/PT-D5700UL; with XGA/WXGA 1 280 x 768 for the PT-DW5100U/PT-DW5100UL); A = the images are converted by the image processing circuit and projected; B = the amount of data is scaled down and simplified images are projected. *3 These signals support the frame lock function. *4 The PT-D5700U
Panasonic PT-D5700U | User Manual - Page 63
R/PR G/Y B/PB SYNC/HD VD Ins;VIDEO IN S-VIDEO IN REMOTE 1 86.5 (3 13/32) 157 (6 3/16) 167 (6 12/64) IN OUT RGB 1 IN REMOTE 2 IN RGB 2 IN IN SERIAL OUT DVI-D IN LAN > remains within the range 0 °C to 40 °C while the projector is running. Also ensure that the air intake and exhaust vents
Panasonic PT-D5700U | User Manual - Page 64
any malfunctions caused by such actions. Trademark Acknowledgement • VGA and XGA are trademarks of International Business Machines Corporation. • S-VGA is in the U.S. and other countries. • Digital Light Processing, DLP, and DLP® CHIP are registered trademarks of the Texas Instruments. • PJLink™
Panasonic PT-D5700U | User Manual - Page 65
constituer un risque de choc éIectrique aux personnes. Le point d'exclamation dans un triangle avertit l'usager de la présence d'instructions importantes concernant l'utilisation et l'entretien (réparation) dans la littérature accompagnant le produit. ATTENTION: Cet appareil est équipé d'une fiche
Panasonic PT-D5700U | User Manual - Page 66
s'il est installé au plafond. • Si l'installation n'est pas faite correctement, cela peut entraîner des blessures ou des chocs électriques. • Utiliser le support de montage au plafond spécifié pour ce modèle. • Utiliser le câble métallique de sûreté fourni et prendre les mesures nécessaires pour
Panasonic PT-D5700U | User Manual - Page 67
ées. • Ne pas laisser de piles épuisées dans l'appareil, car elles risqueraient de fuir, de surchauffer ou d'éclater. Avant de remplacer la lampe, veiller à débrancher la fiche du cordon d'alimentation de la prise de courant. • Il y a risque d'électrocution ou d'explosion. Lors du remplacement de la
Panasonic PT-D5700U | User Manual - Page 68
de surchauffer, de prendre en feu ou d'éclater, ce qui peut causer un incendie ou endommager les zones adjacentes. Ne pas utiliser la lampe usée. • Le bloc lampe risquerait de se casser. Ne pas placer le projecteur dans des endroits extrêmement chauds. • Cela peut causer la détérioration du boîtier
Panasonic PT-D5700U | User Manual - Page 69
service sera grandement affectée si vous allumez et éteignez la lampe de manière fréquente et/ou répétée. • La vie de service d'une lampe un chiffon sec. En cas d'utilisation d'un produit chimique, suivez ses instructions. Ne nettoyez pas la surface de l'objectif avec un chiffon pelucheux ou poussi
Panasonic PT-D5700U | User Manual - Page 70
au fil de l'utilisation, il est nécessaire de la remplacer régulièrement. La lampe doit être remplacée après environ 2 000 heures*1 d'utilisation, mais il se peut qu'elle atteigne la fin de sa durée de service avant 2 000 heures*1 suivant ses caractéristiques ou d'autres facteurs tels que les
Panasonic PT-D5700U | User Manual - Page 71
ventilateur. Faites glisser le cache un peu vers la droite et fixez-le au moyen de la vis pour monter solidement le cache de lampe. Attention • La lampe et le cache doivent être correctement fixés. Si ce n'est pas le cas, un circuit de protection entre en action et la mise sous
Panasonic PT-D5700U | User Manual - Page 72
handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Projectors Panasonic Projector Systems Company Unit of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 PHONE: (201)392-6591 Technical Support: PHONE: (888)-411-1996 FAX: (201)348-7523 E-Mail