Panasonic PT-DW5000U Dlp Projector- English/french

Panasonic PT-DW5000U - DLP Projector - HD Manual

Get Panasonic PT-DW5000U - DLP Projector - HD PDF manuals and user guides
UPC - 791871111338
View all Panasonic PT-DW5000U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic PT-DW5000U manual content summary:

  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 1
    Operating Instructions DLPTM Based Projector Commercial Use PT-D5600U Model No. PT-D5600UL PT-DW5000U PT-DW5000UL Read these instructions completely before operating this unit. TQBJ 0200
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 2
    Panasonic DLPTM based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL and maintenance (servicing) instructions in the
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 3
    and used in accordance with the instructions, may cause harmful interference to radio PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Trade Name: Panasonic Responsible Party: Panasonic North America One Panasonic has a High Intensity Discharge (HID) lamp that contains a small amount of mercury.
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 4
    34 OPTION2 settings 35 ID 35 FRONT/REAR 35 DESK/CEILING 35 LAMP SELECT 35 LAMP POWER 35 RS232C 36 SYSTEM INFORMATION 36 FAN CONTROL1 36 FAN CONTROL2 the PJLinkTM protocol 54 Supported commands 54 PJLinkTM security authentication 54 Before asking for service 55 Specifications 56
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 5
    problem occurs result in fire or electric shocks. • Contact an Authorized Service Center for repairs. Do not cover the air filter, the lamp unit. • If the lamp section breaks, it may cause injury. • The lamp unit has high internal pressure. If improperly handled, explosion might result. • The lamp
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 6
    . • If any water gets inside the projector, contact an Authorized Service Center. Do not insert any foreign objects into the projector. • Do a plastic bag and keep it away from metallic objects. Before replacing the lamp unit, be absolutely sure to disconnect the power plug from the power outlet
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 7
    immediately. • Ask your dealer to replace the lamp unit and check the inside of the projector. can result if this is not done. Ask an Authorized Service Center to clean inside the projector at least once a cleaned out, it can result in fire or problems with operation. • It is a good idea to
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 8
    to vibration or impact. The service life of its internal motors may Install the projector so that it will be supported only by its bottom panel and by none life cycle of a mercury lamp varies according to the individual chemical wipe is used, follow its instructions. Do not clean the lens surface
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 9
    Name and function of parts Remote control < When the operation mode selector is set to Projector > Remote control operation indicator lamp The lamp flashes when any remote control button is pressed. POWER ON ( I ) button (page 23) Turns on the power if the MAIN POWER has been put to
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 10
    multiple number of projectors, these buttons serve to specify a particular projector. They are also used to enter the password when the password for service personnel needs to be entered. Click button (page 15) This button corresponds to the left mouse button when the operation mode is switched to
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 11
    It also blinks if something unusual occurs in the lamp circuit. LAMP2 monitor (page 41) This lamp lights up when the time to replace lamp unit 2 is reached. It also blinks if something unusual occurs in the lamp circuit. Power indicator (page 23) The lamp lights in red when the MAIN POWER switch is
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 12
    Name and function of parts Rear view of the main unit Controls on rear panel Controls on rear panel Ventilation holes Lamp unit cover The lamp unit is housed. MAIN POWER switch (page 23) Use this switch to turn on "I" and off "O" the main power applied to the projector. Remote control
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 13
    from the PC. (10Base-T/100Base-TX compliant) LAN terminal (10Base-T/100Base-TX) Connect LAN cable. LAN 10/100 lamp (Yellow) Lights up when 100Base-TX connected. LAN LINK/ACT lamp (Green) Lights up when connected. Flashes when receiving/sending signals. REMOTE1 lN/OUT terminal (page 16) When two
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 14
    function properly if an object is in the light path. • The remote control receiver may not function properly in intense ambient light such as fluorescent lamps. Carefully site the projector so its remote control receiver windows will not be directly exposed to intense light. 14
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 15
    Setting projector ID number to remote control Every projector has its ID number and the ID number of the controlling projector must be set to the remote control in advance so that the user can operate the remote control. The ID number of the projector is set to "ALL" on shipping, and use the ID ALL
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 16
    Installation Using the remote control unit Using a wired remote control When multiple main units are connected in the system, connect the units with the M3 stereo mini jack cable available in the market to simultaneously control the multiple main units with a single remote control unit through the
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 17
    Listed in the table below are the lens projection distances for the PT-D5600U (lens included), PT-D5600UL (lens sold separately), PT-DW5000U (lens included) and PT-DW5000UL (lens sold separately). • PT-D5600U, PT-D5600UL Screen aspect ratio 4:3 Unit : m, ( ) : inch, [ ] : foot Standard zoom lens
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 18
    Installation Screen aspect ratio 16:9 Unit : m, ( ) : inch, [ ] : foot Standard zoom lens Wide-angle fixed-focus lens Wide-angle zoom lens Optional lens Intermediatefocus Long-focus Ultra-long-focus zoom lens zoom lens zoom lens Projected screen size (16:9 aspect ratio) Model No. : Model
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 19
    • PT-DW5000U, PT-DW5000UL Screen aspect ratio 16:9 Unit : m, ( ) : inch, [ ] : foot Standard zoom lens Wide-angle fixed-focus lens Wide-angle zoom lens Optional lens Intermediatefocus Long-focus Ultra-
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 20
    SD-0.0478 L=0.0549 x SD-0.0657 L=0.0898 x SD-0.0758 L=0.0866 x SD-0.1380 L=0.1342 x SD-0.1310 L=0.1281 x SD+0.0244 L=0.1793 x SD+0.0651 • PT-DW5000U, PT-DW5000UL Screen aspect 16:9 (L, LW, LT : m SD : inch) Standard zoom lens Wide-angle fixedfocus lens Wide-angle zoom lens Intermediate-focus zoom
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 21
    manual problem. • The projector only accepts composite-video, S-video, analog-RGB (with TTL sync. level), and digital signal. • Some PC models are not compatible with PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL S clock- • The DVI-D input terminal supports single link only. • EDID settings should be
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 22
    Connection Example of connecting with AV products DVD player Video deck DVD player Digital Hi-vision video deck with DVI/HDMI terminal R/PR G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 RGB 2 IN IN SERIAL OUT DVI-D IN LAN DVI-D Cable or HDMI-DVI
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 23
    Projection R/PR G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 IN SE Powering up the projector When using an optional lens, install a projection lens before powering up the projector. (Refer to page 25.) Remove the lens cover beforehand. Connect the supplied
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 24
    the cooling fan stops. (Power indicator lit in red) • If you re-power the projector after shutting off the main power inadvertently, the projection lamp may remain unlit. Please turn the power on again after a while. 24 Direct power off function The power supplied internally causes the cooling fan
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 25
    (optional) How to install the projection lens Align the guide of the projection lens with the guide groove in the main unit. Turn the lens clockwise until it clicks into place. Guide groove Guide Guide groove Guide Lens signal contact Projection lens Attention • Turn the lens counterclockwise
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 26
    sync and G-SYNC sync signals and some types of PCs, it may not be possible to perform these automatic adjustments. In this case, manually adjust the items of "INPUT RESOLUTION", "CLOCK PHASE" and "POSITION". • Image may be disturbed for about 4 seconds during automatic adjustment, which is not
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 27
    MAC ADDRESS STORE SELECT ENTER RETRN SECURITY (page 37) TEST PATTERN (page 37) OPTION2 (page 35) OPTION2 ID FRONT/REAR DESK/CEILING LAMP SELECT LAMP POWER RS232C SYSTEM INFORMATION FAN CONTROL1 FAN CONTROL2 FUNC1 AUTO POW. OFF PASSWORD SELECT ADJ ALL FRONT DESK DUAL HIGH NORMAL HORIZ. DISABLE
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 28
    On-screen menus Basic menu operations Press the "MENU" button. The MENU appears on the screen. MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION1 OPTI0N2 TEST PATTERN SECURITY NETWORK SELECT ENTER EXIT Select (highlight) the desired item with the or buttons. Selected items are displayed in blue.
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 29
    Adjusting the picture • For RGB signals PICTURE MODE BRIGHT CONTRAST COLOR TEMP. WHITE GAIN SHARPNESS NR AI SYSTEM SELECT PICTURE ADJ GRAPHIC 32 32 DEFAULT 10 06 OFF ON RGB RETRN • For S-Video/Video signals PICTURE MODE BRIGHT CONTRAST COLOR TINT COLOR TEMP. WHITE GAIN SHARPNESS NR AI TV-
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 30
    are converted by the PT-D5600U to the 4:3 aspect ratio and displayed. With the PTDW5000U, the images are PT-D5600U or 15:9 for the PT-DW5000U) and displayed. 1 S1 video signals are 16:9 video signals to which is added the detection signal output from the video deck or other unit which supports
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 31
    Attention • If you choose an aspect ratio that does not match the source video's aspect ratio, you will see a picture with an aspect ratio not the same as that of the original picture. Choose the appropriate aspect ratio carefully to match that of the original picture. Note • If the picture size
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 32
    How to use ADVANCED MENU ADVANCED MENU DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION CLAMP POS. 1 RASTER POSITION XGA MODE XGA SXGA MODE SXGA SELSCT ENTER RETRN DIGITAL CINEMA REALITY (Only for input of S-Video/ Video/ YPBPR [480i, 576i] signals.) ON: Set at ON when you need to
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 33
    RASTER POSITION When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area. : These adjust the value in the horizontal direction. : These adjust the value in the vertical direction. XGA MODE This mode takes effect only
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 34
    OPTION1 settings OPTION1 COLOR CORRECTION CONTRAST MODE AUTO SIGNAL BACK COLOR SUB MEMORY LIST DVI EDID SELECT ENTER OFF BLACK EDID2:PC RETRN COLOR CORRECTION OFF : Standard setting USER : The six colors of red, green, blue, cyan, magenta and yellow can be adjusted and registered for each of four
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 35
    This time period is 4 000 hours when long life lamp units (page 43) are used. LAMP POWER The luminance of the projection lamp can be changed depending on user's needs or the viewing power consumption, reduce operating noise and extend lamp service life. • "LOW" is set automatically when long life
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 36
    . Using the projector at the wrong FAN CONTROL2 setting will shorten the service life of the lamps. FUNC1 The user can set the function for the remote control's FUNC1 button. LAMP POWER: The button functions in the same way as "LAMP POWER" of "OPTION2". ASPECT: This button has the same functions as
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 37
    Focus All black Colour bars Flag Window (inversion) Black on white ground 16:9 frame Window White on black ground The PT-DW5000U and PT-DW5000UL support the 4:3 frame format. Setting the security The projector's security function enables the password input screen to be displayed or a company
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 38
    Setting the network The settings required for the network must be established in order to use the web browser (page 46) functions that the PC uses to control the projector. HOST NAME DHCP IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS STORE SELECT NETWORK ENTER OFF RETRN HOST NAME : Make alteration
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 39
    can be sent or received for 10 to 60 seconds after the lamp starts lighting. Try sending any command after that period has elapsed. is received, the projector will send an "ER402" response to the computer. • Projector ID supported on the RS232C interface is ZZ (ALL) and a group of 1 to 64 and 0A
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 40
    Command Function of command PON POF Power "ON" Power "STANDBY" QPW Power query I I S Switch input modes QSL Query for active lamp mode LPM Active lamp mode Lamp power OLP setting Remarks To confirm that the power is ON, use a "Power query" command. Parameter 000 = STANDBY 001 = Power
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 41
    using the procedure on • Check for fluctuation page 24 and consult the (or drop) in the source dealer. voltage. Attention • To solve any problems that the TEMP and LAMP monitor show, first turn the power off by following the steps on pages 23, 24. • If the power indicator blinks in red (3 times
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 42
    . 42 Note • If cleaning cannot remove the dust completely, then it is a sign to replace the air filter. Consult the dealer. In addition, when the lamp unit is replaced, also replace the air filter. • Be absolutely sure to use the air filter specifically designed for use with the projector.
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 43
    including standby state. Further, an on-screen indication will appear for about 30 seconds as shown in the diagram on the left, recommending replacement of lamp unit. (The indication on the left diagram will disappear after about 30 seconds or when either control button on the rear of main unit or
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 44
    such a way that the screws in steps and will not fall through completely. Open the fan unit as shown in the figure. Handle Lamp unit 1 Caution The lamp unit will be hot after it has been used. You might get burned if you touch it while it is still hot. Remove the
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 45
    MAIN POWER switch. Attention • If the power does not turn on even after turning the MAIN POWER switch "I", turn the MAIN POWER "O", confirm that the lamp unit and door are installed correctly, and turn on again. Press the " I " button so that a picture is projected onto the screen. Press the "MENU
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 46
    status display • Transmission of a E-mail message when the projector has a problem Accessing from the Web browser Start the web browser on your PC, then enter the password in the password field. The default setting is "panasonic" (all lower case). If you have changed the password, enter the new
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 47
    Basic control page This page is the first page displayed when the projector is accessed through a web browser. To move from another page, click [Projector control], then [Basic control]. Control button Click this item, and a projector control page appears. Monitor information button Click this
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 48
    . Displays temperature inside the projector. Displays temperature around the lamp. Displays the lamp1 lit hours. Displays the lamp2 lit hours to display the error details. 48 OK: Normal operation FAILED: Occurrence of trouble Note • Depending on the nature of the error, the projector may be placed
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 49
    has occurred in the air volume sensor. Consult your dealer. Trouble has occurred in the color wheel or the color wheel drive circuit. Consult your dealer. E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 50
    days checked. Button to update settings Select the conditions for sending the second E-mail. ERROR: an error is detected by self-diagnosis. LAMP RUNTIME: remaining lamp service time has reached the value set in the field. INPUT AIR TEMPERATURE: intake air temperature has reached the value set in the
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 51
    DNS server set up page Click [Network set up], then [DNS server set up] to display the DNS server set up page. Primary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. 192.168.0.253) Secondary DNS server address Available input characters: Numbers (0 - 9), period (.) (
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 52
    • Mail with the contents shown below is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : D5600 ----- check system ----- MAIN CPU BUS degF Optics module temperature : 30 degC / 86 degF Around lamp temperature : 37 degC / 98 degF SET RUNTIME 30 H
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 53
    Network config page Set this to ON to enable the DHCP client function. Enter the IP address if DHCP server is not used. Enter the subnet mask if DHCP server is not used. Enter the gateway address if DHCP server is not used. Enter the name of the projector here. Enter the host name here if it is
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 54
    PJLink™ protocol. • Projector settings • Projector status inquiry Supported commands The commands for controlling the projector using the Lamp OFF; 1 = Lamp ON Parameter responds with following values: "11 12 21 22 31" Responds with the name set in "HOST NAME" of "NETWORK" Responds with "Panasonic
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 55
    asking for service ---Before asking for service, check the on? (See page 41) • Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on? (See page 41) • Is the lamp unit door installed correctly? • A wrong ID set? (Read the operating instructions of the your PC.) 55
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 56
    PT-D5600U PT-D5600UL PT-DW5000U PT-DW5500UL Power supply Power consumption DLPTM panel Panel size Display system Number of pixels Lens Powered zoom Powered focus control Projection lamp 15 kHz-91 kHz, vertically 50 Hz-85 Hz, Panasonic Intelligent Auto Scanning (PIAS) system Dot clock frequency Less
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 57
    lens Wireless mouse receiver Replacement lamp unit Long life lamp unit PT-D5600U PT-D5600UL PT-DW5000U PT-DW5500UL 1 set of high- : 145 mm (5.7") ET-PKD55 ET-PKD55S PT-D5600U/PT-D5600UL ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050 PT-DW5000U/PT-DW5000UL ET-DLE100, ET-DLE200, ET-DLE310,
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 58
    for PT-D5600U/PT-D5600UL, and 1 280 x 768 for PTDW5000U/PT-DW5000UL. If signals with a number of display dots differing from the data listed above are supplied, they will be converted into signals with 1 024 x 768 dots and displayed for PTD5600U/PT-D5600UL, and 1 280 x 768 for PT-DW5000U/PT-DW5000UL
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 59
    Dimensions R30 478.5 (18 27/32) unit : mm ( ) : inch Ins;R/PR G/Y B/PB SYNC/HD VD 86.5 (3 13/32) 157 (6 3/16) 167 (6 12/64) VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 RGB 2 IN IN SERIAL OUT DVI-D IN LAN >PC< TBMU448 436 (17 11/64) 530 (20 55/64) tallation dimensions
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 60
    constituer un risque de choc éIectrique aux personnes. Le point d'exclamation dans un triangle avertit l'usager de la présence d'instructions importantes concernant l'utilisation et l'entretien (réparation) dans la littérature accompagnant le produit. ATTENTION: Cet appareil est équipé d'une fiche
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 61
    ce projecteur dans un endroit qui n'est pas assez résistant pour supporter le poids du projecteur. • Si I'emplacement d'installation n'est pas assez Ne démontez pas le bloc lampe. • Une rupture de la lampe peut provoquer une blessure corporelle. • L'unité de lampe a une pression interne élevée.
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 62
    brancher de la prise de courant la fiche du cordon d'alimentation. • Autrement, il y a risque de chocs électriques et/ou de dommages. Lorsque vous remplacez la lampe, laissez-la refroidir au moins une heure avant de la manipuler. Ne pas placer les mains ou autres objets près de la sortie d'air. • De
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 63
    gaz, ou que le gaz a pénétré dans les yeux ou la bouche, consulter immédiatement un médecin. • Demander à son revendeur de remplacer l'unité de lampe et de vérifier l'intérieur du projecteur. Demander à un centre technique agréé de nettoyer I'intérieur du projecteur au moins une fois par an. • S'il
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 64
    rioration due aux heures d'utilisation. • La vie de service d'une lampe au mercure varie individuellement et selon les conditions d'utilisation. chiffon sec. En cas d'utilisation d'un produit chimique, suivez ses instructions. Ne nettoyez pas la surface de l'objectif avec un chiffon pelucheux ou
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 65
    écifiée. Période de remplacement de la lampe La lampe utilisée comme source lumineuse dans le projecteur a une vie de service de 1 500 heures 1 (quand la sortie de la lampe est FORTE et la sélection de lampe DOUBLE). Il peut arriver que la lampe soit épuisée (ne s'allume pas) à 1 500 heures 1 selon
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 66
    branchez la fiche électrique et vérifiez que les éléments autour de la lampe ont refroidi. Assurez-vous que le ventilateur est arrêté. Préparez un tournevis Phillips -le au moyen de la vis pour monter solidement le cache de lampe. Attention • La lampe et le cache doivent être correctement fixés. Si ce n'est pas
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 67
    mise sous tension ne s'effectue pas même une fois que vous avez positionne l'interrupteur principal sur "I", remettez ce dernier sur "O", vérifiez que la lampe et son cache sont correctement installés et rallumez. Appuyez sur la touche " I " afin de projecteur une image sur l'écran. Appuyez sur la
  • Panasonic PT-DW5000U | Dlp Projector- English/french - Page 68
    07094 (201) 392-6591 3330 Cahuenga Blvd West Los Angels, CA 90068 (323) 436-3500 Technical Support: (800) 524-1448 (800) 526-6610 FAX: (201) 392-6514 E-Mail: [email protected] Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 © 2006 Matsushita Electric
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
DLP
TM
Based Projector
Commercial Use
Operating Instructions
Read these instructions completely before operating this unit.
TQBJ 0200
Model No.
PT-D5600U
PT-D5600UL
PT-DW5000U
PT-DW5000UL