Panasonic PT-RS11KU Operating Instructions

Panasonic PT-RS11KU Manual

Get Panasonic PT-RS11KU PDF manuals and user guides View all Panasonic PT-RS11KU manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic PT-RS11KU manual content summary:

  • Panasonic PT-RS11KU | Operating Instructions - Page 1
    . zzfor India PT-RZ12KD / PT-RS11KD zzfor other countries or regions PT-RZ12K / PT-RS11K ■■ Before operating this product, please read the instructions carefully and save this manual for future use. ■■ Before using this product, be sure to read "Read this first!" (x pages 5 to 14). ENGLISH TQBJ0904
  • Panasonic PT-RS11KU | Operating Instructions - Page 2
    Contents Contents Read this first!  5 Projecting  64 Selecting the input signal  64 Chapter 1 Preparation How to adjust focus, zoom, and shift  64 Adjusting the lens position and focus when the PreCCSceaaacuuuutttiiiroooitnnynss s wwfohheer nnustinreas n taslplinogrt i ng
  • Panasonic PT-RS11KU | Operating Instructions - Page 3
    [3D TEST MODE]  105 [LOAD ALL USER DATA]  144 [3D TEST PATTERN]  105 [INITIALIZE]  144 [SAFETY PRECAUTIONS MESSAGE]  106 [SERVICE PASSWORD]  145 [3D SAFETY PRECAUTIONS]  106 [P IN P] menu  146 [DISPLAY OPTION] menu  107 Using P IN P function  146 [COLOR MATCHING
  • Panasonic PT-RS11KU | Operating Instructions - Page 4
    lights up  182 Maintenance/replacement  184 Before performing maintenance/replacement  184 Maintenance  184 Replacing the unit  186 Troubleshooting  187 Self-diagnosis display  189 Chapter 6 Appendix Technical information  192 PJLink protocol  192 Using Art-Net function
  • Panasonic PT-RS11KU | Operating Instructions - Page 5
    electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ENGLISH - 5
  • Panasonic PT-RS11KU | Operating Instructions - Page 6
    Read this first! Notice on laser (for USA and Canada) This projector is the Class 3R laser product that complies with IEC 60825-1:2007. 52'9 For North America "Complies with 21 CFR Parts 1040.10 and 140.11 except for deviations pursuant to Laser Notice No.50 dated june 24.2007" IEC 60825-1:2007
  • Panasonic PT-RS11KU | Operating Instructions - Page 7
    Read this first! CAUTION (North/Middle/South America/Taiwan) Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V.
  • Panasonic PT-RS11KU | Operating Instructions - Page 8
    Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com/support http://panasonic.net/avc/projector/ This device complies with Part 15 of and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Panasonic PT-RS11KU | Operating Instructions - Page 9
    you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorized Service Center. If the fitted molded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut
  • Panasonic PT-RS11KU | Operating Instructions - Page 10
    near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued objects on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
  • Panasonic PT-RS11KU | Operating Instructions - Page 11
    any inspection, adjustment and repair work, please contact an Authorized Service Center. Doing so may cause exposure to dangerous laser radiation. is built in this projector. Follow procedures specified in the Operating Instructions to make operations and adjustments. Do not allow metal objects,
  • Panasonic PT-RS11KU | Operating Instructions - Page 12
    Read this first! CAUTION: rr POWER When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result. When not using the projector for an extended
  • Panasonic PT-RS11KU | Operating Instructions - Page 13
    of time may cause eye fatigue. When preparing contents, use contents properly created to be used for 3D. This may cause eye fatigue or health problems. When viewing 3D images, pay attention to people and objects in the vicinity. 3D video may be mistaken for actual objects, and the related bodily
  • Panasonic PT-RS11KU | Operating Instructions - Page 14
    Read this first! To remove the battery Remote Control Battery 1. Press the guide and lift the cover. 2. Remove the batteries. (ii) (i) Brazil Only Brasil Apenas rr Manuseio de baterias usadas BRASIL Após o uso, as pilhas e/ou baterias deverão
  • Panasonic PT-RS11KU | Operating Instructions - Page 15
    trademarks or registered trademarks of their respective owners. Please note that the ® and TM symbols are not specified in this manual. rrIllustrations in this manual ffIllustrations of the projector, screen, and other parts may vary from the actual product. ffIllustrations of the projector with the
  • Panasonic PT-RS11KU | Operating Instructions - Page 16
    ) Easy and highly flexible setup ⾣▶In addition to the DIGITAL LINK support, Art-Net support, and abundant lineup of the optional lens, application to wide range of usage is possible with support of all 360° direction projection utilizing the characteristics of
  • Panasonic PT-RS11KU | Operating Instructions - Page 17
    Chapter 1 Preparation This chapter describes things you need to know or check before using the projector. ENGLISH - 17
  • Panasonic PT-RS11KU | Operating Instructions - Page 18
    Chapter 1 Preparation - Precautions for use Precautions for use Cautions when transporting ffBefore using the projector, remove the dust sponge from the mounting portion of the projection lens and store it for the future use. When transporting the projector, remove the projection lens before
  • Panasonic PT-RS11KU | Operating Instructions - Page 19
    screw holes where the adjustable feet were removed to fix the projector in place. Also, insert only the screws that are specified in the user manual of the optional accessories into the screw holes of the adjustable feet. Failure to do so may cause damage to the projector. ENGLISH - 19
  • Panasonic PT-RS11KU | Operating Instructions - Page 20
    slipping off as a precaution. Use the optional Frame (Model No.: ET‑PFD510) when stacking two projectors and using them simultaneously. ffDo not use the projector supporting it by the top. ffDo not block the ventilation ports (intake and exhaust) of the projector. 20 - ENGLISH
  • Panasonic PT-RS11KU | Operating Instructions - Page 21
    Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. This projector does not support audio transmission because it is not equipped with audio function. ENGLISH - 21
  • Panasonic PT-RS11KU | Operating Instructions - Page 22
    software, illumination and stage system can be controlled. Art-Net is made based on DMX512 communication protocol. Early Warning Software The projector supports "Early Warning Software", which monitors the status of the display (projector or flat panel display) and the peripheral devices inside an
  • Panasonic PT-RS11KU | Operating Instructions - Page 23
    ffWhen connecting a computer or an external device, read this manual carefully regarding the use of power cords and shielded cables as external devices vary depends on the 3D system to be used, see the operating instructions of external devices you use. Refer to "List of 3D compatible signals" (x
  • Panasonic PT-RS11KU | Operating Instructions - Page 24
    Chapter 1 Preparation - Precautions for use Accessories Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit (N2QAYB001052) (K2CZ3YY00058) (K2CZ3YY00032) Power cord (
  • Panasonic PT-RS11KU | Operating Instructions - Page 25
    The contents of the supplied CD-ROM are as follows. Instruction/list (PDF) Software Operating Instructions - Functional Manual Multi Monitoring & Control Software Operating Instructions Logo Transfer Software Operating Instructions List of Compatible Device Models This is a list of display
  • Panasonic PT-RS11KU | Operating Instructions - Page 26
    Chapter 1 Preparation - About your projector About your projector Remote control Front 1 2 3 Top 11 21 12 13 4 5 14 6 15 Bottom 16 7 A strap can be attached 8 depending on the usage. 22 9 17 10 18 19 20 23 1 Remote control indicator Blinks if any button in the remote
  • Panasonic PT-RS11KU | Operating Instructions - Page 27
    with new one. gg Do not use batteries other than the type specified. gg Be sure the batteries are inserted properly. For other instructions, read the instructions related to batteries that are described in "Read this first!". 1.Do not use old battery with new one. 2.Do not use batteries other
  • Panasonic PT-RS11KU | Operating Instructions - Page 28
    Projector body Front 1 234 56 Chapter 1 Preparation - About your projector Side 78 Rear 7 9 8 12 8 13 14 15 10 16 17 Bottom 4 Light source indicator Indicates the status of light source 2. 11 5 Temperature indicator Indicates the internal temperature status. 6 Filter
  • Panasonic PT-RS11KU | Operating Instructions - Page 29
    Chapter 1 Preparation - About your projector rrControl panel 1 2 3 4 5 6 7 8 9 10 1 Power on button Sets the projector to projection mode when the switch on the projector is set to and the power is turned off (standby mode). 2 Power standby button Sets the projector to the
  • Panasonic PT-RS11KU | Operating Instructions - Page 30
    Chapter 1 Preparation - About your projector rrConnecting terminals 1 2 3 4 5 6 7 8 9 10 11 1 terminal/ terminal These are terminals to connect the remote control for serial control in a multiple projector environment. 2 terminal This is a
  • Panasonic PT-RS11KU | Operating Instructions - Page 31
    Chapter 1 Preparation - Preparing the remote control Preparing the remote control Inserting and removing the batteries (ii) (i) Fig. 1 Fig. 2 1) Open the cover. (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) ffWhen removing the batteries, perform the
  • Panasonic PT-RS11KU | Operating Instructions - Page 32
    Chapter 1 Preparation - Preparing the remote control Connecting the remote control to the projector with a cable If you control the multiple projectors with a single remote control, use commercially available M3 stereo mini jack cables to connect to the / terminals of the
  • Panasonic PT-RS11KU | Operating Instructions - Page 33
    Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections. ENGLISH - 33
  • Panasonic PT-RS11KU | Operating Instructions - Page 34
    Setting up Chapter 2 Getting Started - Setting up Installation mode The installation modes of the projector are as follows. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 125) depending on the installation mode. Mounting on the ceiling and projecting forward Setting on a desk/
  • Panasonic PT-RS11KU | Operating Instructions - Page 35
    No.: ET‑PKD520B (Projector Mount Bracket)). ffBe sure to use the Ceiling Mount Bracket specified for this projector. ffRefer to the Installation Instructions of the Ceiling Mount Bracket when installing and setting up the projector. Two projectors can be stacked and used simultaneously by using the
  • Panasonic PT-RS11KU | Operating Instructions - Page 36
    Chapter 2 Getting Started - Setting up rrFor the Fixed-focus Lens (Model No.: ET‑D75LE90) Projected image SD Screen SH L2 L1 SW L3 SW SH A1 A2 L4 Screen (Unit: m) SH Projected image height SW Projected image width SD Projected image size L1 Projection distance (from the screen
  • Panasonic PT-RS11KU | Operating Instructions - Page 37
    Chapter 2 Getting Started - Setting up [GEOMETRY] projection range [VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above) Screen Screen Vertical arc correction (viewed from the side) Projection distance Arc radius Screen Horizontal arc correction (viewed from
  • Panasonic PT-RS11KU | Operating Instructions - Page 38
    Chapter 2 Getting Started - Setting up Standard status Projection lens Model No. ET‑D75LE6 ET‑D75LE8 ET‑D75LE10 ET‑D75LE20 ET‑D75LE30 ET‑D75LE40 ET‑D75LE50 ET‑D75LE90*1 Only [KEYSTONE] used Vertical keystone correction angle α (°) Horizontal keystone correction angle β (°) ±28 ±15 ±40 ±15
  • Panasonic PT-RS11KU | Operating Instructions - Page 39
    Chapter 2 Getting Started - Setting up Projection distance of each projection lens A ±5 % error in listed projection distances may occur. When [GEOMETRY] is used, distance is corrected to become smaller than the specified image size. For PT‑RZ12K rrWhen the image aspect ratio is 16:10 (Unit: m)
  • Panasonic PT-RS11KU | Operating Instructions - Page 40
    Chapter 2 Getting Started - Setting up rrWhen the image aspect ratio is 16:9 (Unit: m) Lens type Projection lens Model No. ET‑D75LE6 Throw ratio*1 0.9‑1.1:1 Projected image size Diagonal (SD) Height (SH) Width (SW) Min. (LW) Max. (LT) 1.78 (70") 0.872 1.550 1.39 1.66 2.03 (80") 0.
  • Panasonic PT-RS11KU | Operating Instructions - Page 41
    Chapter 2 Getting Started - Setting up rrWhen the image aspect ratio is 4:3 (Unit: m) Lens type Projection lens Model No. ET‑D75LE6 Throw ratio*1 1.1‑1.3:1 Projected image size Diagonal (SD) Height (SH) Width (SW) Min. (LW) Max. (LT) 1.78 (70") 1.067 1.422 1.54 1.84 2.03 (80") 1.
  • Panasonic PT-RS11KU | Operating Instructions - Page 42
    Chapter 2 Getting Started - Setting up For PT‑RS11K rrWhen the image aspect ratio is 4:3 (Unit: m) Lens type Projection lens Model No. ET‑D75LE6 Throw ratio*1 1.0‑1.2:1 Projected image size Diagonal (SD) Height (SH) Width (SW) Min. (LW) Max. (LT) 1.78 (70") 1.067 1.422 1.39 1.66 2.
  • Panasonic PT-RS11KU | Operating Instructions - Page 43
    Chapter 2 Getting Started - Setting up rrWhen the image aspect ratio is 16:9 (Unit: m) Lens type Projection lens Model No. ET‑D75LE6 Throw ratio*1 1.0‑1.2:1 Projected image size Diagonal (SD) Height (SH) Width (SW) Min. (LW) Max. (LT) 1.78 (70") 0.872 1.550 1.52 1.82 2.03 (80") 0.
  • Panasonic PT-RS11KU | Operating Instructions - Page 44
    Chapter 2 Getting Started - Setting up Formula for calculating the projection distance per projection lens To use a projected image size not listed in this manual, check the projected image size SD (m) and use the respective formula to calculate projection distance. The unit of all the formulae is
  • Panasonic PT-RS11KU | Operating Instructions - Page 45
    Chapter 2 Getting Started - Setting up For PT‑RS11K rrZoom Lens Projection lens Model No. ET‑D75LE6 ET‑D75LE10 ET‑D75LE20 ET‑D75LE30 ET‑D75LE40 ET‑D75LE8 Throw ratio 1.0 - 1.2:1 1.0 - 1.2:1 1.4 - 1.8:1 1.4 - 1.8:1 1.8 - 2.6:1 1.8 - 2.6:1 2.6 - 5.1:1 2.6 - 5.1:1 5.0 - 8.0:1 5.0 - 8.0:1 7.9 - 15.0:1
  • Panasonic PT-RS11KU | Operating Instructions - Page 46
    precautions for handling the lens are different for the Fixed-focus Lens (Model No.: ET‑D75LE90). For details, refer to the Operating Instructions of ET‑D75LE90. Attaching the projection lens Attach the projection lens using the following procedure. Mark (orange) Screw hole A Fig. 1 Fig. 2 Lens
  • Panasonic PT-RS11KU | Operating Instructions - Page 47
    Chapter 2 Getting Started - Attaching/removing the projection lens (optional) Removing the projection lens Remove the projection lens using the following procedure. Lens release button Fig. 1 1) Remove the lens fixing screw. ffUse a Phillips screwdriver to remove the first screw to the right of the
  • Panasonic PT-RS11KU | Operating Instructions - Page 48
    Connecting Chapter 2 Getting Started - Connecting Before connecting ffBefore connecting, carefully read the operating instructions for the external device to be connected. ffTurn off the power of all devices before connecting cables. ffTake note of the following points before connecting
  • Panasonic PT-RS11KU | Operating Instructions - Page 49
    /DVI conversion cable. However, this may not function properly for some external devices, and images may not be displayed. ff The projector does not support VIERA Link (HDMI). ff When the video signal and the Y/C signal are input, switch the setting using the [DISPLAY OPTION] menu → [RGB IN] → [RGB1
  • Panasonic PT-RS11KU | Operating Instructions - Page 50
    HDMI/DVI conversion cable. However, this may not function properly for some external devices, and images may not be displayed. ff The terminal supports single links only. ff When entering the SYNC ON GREEN signal, do not enter sync signals to the terminal or the terminal
  • Panasonic PT-RS11KU | Operating Instructions - Page 51
    possible depending on the twisted-pair-cable transmitter. Check the operating instructions of the device to be connected. Attention ff Always use be interrupted or may not be displayed. ff The projector does not support VIERA Link (HDMI). ff The maximum transmission distance between the twisted-
  • Panasonic PT-RS11KU | Operating Instructions - Page 52
    of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. 52 - ENGLISH
  • Panasonic PT-RS11KU | Operating Instructions - Page 53
    Chapter 3 Basic Operations This chapter describes basic operations to start with. ENGLISH - 53
  • Panasonic PT-RS11KU | Operating Instructions - Page 54
    Chapter 3 Basic Operations - Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the switch is on the side
  • Panasonic PT-RS11KU | Operating Instructions - Page 55
    status display. ff If the operating environment temperature is low and warm-up takes more than five minutes, the projector will judge that a problem has occurred and the power will automatically be set to standby mode. In such case, increase the operating environment temperature to 0 °C (32 °F) or
  • Panasonic PT-RS11KU | Operating Instructions - Page 56
    Chapter 3 Basic Operations - Switching on/off the projector When the initial setting screen is displayed When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR SETUP] menu → [INITIALIZE], the focus adjustment screen is
  • Panasonic PT-RS11KU | Operating Instructions - Page 57
    LINK GROUP A CALIBRATION TIME OFF CALIBRATION MESSAGE ON Set the way to use the projector. For details, please refer to the operating instructions "When the initial setting screen is displayed". MENU SELECT ENTER SET CHANGE Note ff The preceding initial setting screen is displayed when the
  • Panasonic PT-RS11KU | Operating Instructions - Page 58
    Chapter 3 Basic Operations - Switching on/off the projector 6) Press qw to adjust. Operation Press w. Press q. Adjustment Brightness Runtime (estimate) The screen becomes brighter. The runtime becomes shorter. The screen becomes darker. The runtime becomes longer. Range of adjustment 8.0 %
  • Panasonic PT-RS11KU | Operating Instructions - Page 59
    Chapter 3 Basic Operations - Switching on/off the projector Interrelation of luminance and runtime You can use the projector with desired brightness and duration of use by combining the settings of [MAX LIGHT OUTPUT LEVEL], [LIGHT OUTPUT], and [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP].
  • Panasonic PT-RS11KU | Operating Instructions - Page 60
    Chapter 3 Basic Operations - Switching on/off the projector Initial setting (installation setting) Set [PROJECTION METHOD] depending on the installation mode. Refer to "Installation mode" (x page 34) for details. After completed the initial setting, you can change the setting from the [PROJECTOR
  • Panasonic PT-RS11KU | Operating Instructions - Page 61
    Chapter 3 Basic Operations - Switching on/off the projector Initial setting (screen setting) Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING]. 1)
  • Panasonic PT-RS11KU | Operating Instructions - Page 62
    Chapter 3 Basic Operations - Switching on/off the projector Initial setting (date and time) Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE AND TIME]. To set the date and time automatically, refer to "Setting the
  • Panasonic PT-RS11KU | Operating Instructions - Page 63
    Chapter 3 Basic Operations - Switching on/off the projector Note ff When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then
  • Panasonic PT-RS11KU | Operating Instructions - Page 64
    Chapter 3 Basic Operations - Projecting Projecting Check the projection lens attachment (x page 46), external device connection (x page 48), power cord connection (x page 54), switch on the power (x page 55) to start projecting. Select the video for projection, and adjust appearance of the projected
  • Panasonic PT-RS11KU | Operating Instructions - Page 65
    screw. ffPeriphery focus adjustment ring is fixed. Note ff The projected image size and scale shown on the periphery focus adjustment ring are an approximate guide. ENGLISH - 65
  • Panasonic PT-RS11KU | Operating Instructions - Page 66
    Chapter 3 Basic Operations - Projecting Setting the lens position To move the lens position to the home position or the lens standard position, perform the following procedure. 1) Press the button on the remote control while the shift adjustment screen is displayed. ffThe [HOME POSITION
  • Panasonic PT-RS11KU | Operating Instructions - Page 67
    Chapter 3 Basic Operations - Projecting rrFor PT‑RS11K Projection lens Model No. ET‑D75LE8, ET‑D75LE10, ET‑D75LE20, ET‑D75LE30, ET‑D75LE40 ET‑D75LE6 Projected image width H 0.3 H 0.3 H Projected image width H 0.2 H 0.2 H Projected image height V 0.12 V 0.4 V Projected image height V
  • Panasonic PT-RS11KU | Operating Instructions - Page 68
    Chapter 3 Basic Operations - Projecting rrFront view diagram of the lens mounter (viewed from the screen side) Lens mount bracket (a) Fixing screws (b) (c) Note ff Focus adjustment screws (a), (b), and (c) are adjusted with the lens attached. Adjustment procedure rrRelationship between the
  • Panasonic PT-RS11KU | Operating Instructions - Page 69
    Chapter 3 Basic Operations - Projecting 6) Press the button on the remote control or the button on the control panel to display the shift adjustment menu, and reset the screen position of the projected image on the screen surface back to an optimal state. 7) Perform focus adjustment
  • Panasonic PT-RS11KU | Operating Instructions - Page 70
    Chapter 3 Basic Operations - Operating with the remote control Operating with the remote control Switching the input The input for projection can be switched. Method to switch the input is as follows. ffPress the input selection button and directly specify the input to project. ffDisplay the input
  • Panasonic PT-RS11KU | Operating Instructions - Page 71
    when the button is pressed while the DIGITAL LINK input is selected in the input selection screen. ff If the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector, the DIGITAL LINK logo and the input name selected in the DIGITAL LINK
  • Panasonic PT-RS11KU | Operating Instructions - Page 72
    or gradation, such as photographs and computer graphics. button 1) Press the button. ff[COMPLETE] is displayed when it has completed without any problem. ffThis operation can be also performed using the button on the control panel. Note ff The clock phase may shift even if
  • Panasonic PT-RS11KU | Operating Instructions - Page 73
    Chapter 3 Basic Operations - Operating with the remote control Using the function button The button of the remote control can be used as a simplified shortcut button by assigning the following functions: [P IN P], [SUB MEMORY], [SYSTEM SELECTOR], [SYSTEM DAYLIGHT VIEW], [FREEZE], [
  • Panasonic PT-RS11KU | Operating Instructions - Page 74
    Chapter 3 Basic Operations - Operating with the remote control Using the AC voltage monitor function The value of input supply voltage can be displayed on the self-diagnosis display at the side of the projector. rrTo display during projection 1) Press the power on button. ffThe value of the
  • Panasonic PT-RS11KU | Operating Instructions - Page 75
    Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu. ENGLISH - 75
  • Panasonic PT-RS11KU | Operating Instructions - Page 76
    Chapter 4 Settings - Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button 1) Press the button on the remote control or control panel. ffThe [MAIN MENU] screen is
  • Panasonic PT-RS11KU | Operating Instructions - Page 77
    Chapter 4 Settings - Menu navigation 4) Press as to select a sub-menu, and press qw or the button to change or adjust settings. ffSome items will switch in order as follows each time you press qw. A B C ffFor some items, press qw to display an individual adjustment screen with a bar
  • Panasonic PT-RS11KU | Operating Instructions - Page 78
    Chapter 4 Settings - Menu navigation Main menu item [DISPLAY LANGUAGE] Page 101 [3D SETTINGS] 102 [DISPLAY OPTION] 107 [PROJECTOR SETUP] 125 [P IN P] 146 [TEST PATTERN] 148 [SIGNAL LIST] 149 [SECURITY] 152 [NETWORK] 156 Sub-menu The sub-menu of the selected main menu item is
  • Panasonic PT-RS11KU | Operating Instructions - Page 79
    Chapter 4 Settings - Menu navigation Sub-menu item [INPUT RESOLUTION] [CLAMP POSITION] [EDGE BLENDING] [FRAME RESPONSE] [FRAME CREATION] [FRAME LOCK] [RASTER POSITION] Factory default ― [24]*1 [OFF] [NORMAL] [2] ― ― *1 Depends on the signal input. Note ff Sub-menu items and factory default
  • Panasonic PT-RS11KU | Operating Instructions - Page 80
    MODE] [FUNCTION BUTTON] [LENS CALIBRATION] [LENS MEMORY] [STATUS] [AC VOLTAGE MONITOR] [SAVE ALL USER DATA] [LOAD ALL USER DATA] [INITIALIZE] [SERVICE PASSWORD] [P IN P] Details (x page 146) [TEST PATTERN] Details (x page 148) [SIGNAL LIST] Details (x page 149) [SECURITY] Sub-menu item [SECURITY
  • Panasonic PT-RS11KU | Operating Instructions - Page 81
    Chapter 4 Settings - Menu navigation [NETWORK] Sub-menu item [DIGITAL LINK MODE] [DIGITAL LINK SETUP] [DIGITAL LINK STATUS] [NETWORK SETUP] [NETWORK CONTROL] [NETWORK STATUS] [DIGITAL LINK MENU] [Art-Net SETUP] [Art-Net CHANNEL SETTING] [Art-Net STATUS] Factory default [AUTO OFF] [2] ― Page 156
  • Panasonic PT-RS11KU | Operating Instructions - Page 82
    Chapter 4 Settings - [PICTURE] menu [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. [PICTURE MODE] You can switch to the desired picture mode
  • Panasonic PT-RS11KU | Operating Instructions - Page 83
    Chapter 4 Settings - [PICTURE] menu Attention ff Adjust [BRIGHTNESS] first when you need to adjust the black level. [BRIGHTNESS] You can adjust the dark (black) part of the projected image. 1) Press as to select [BRIGHTNESS]. 2) Press qw or the button. ffThe [BRIGHTNESS] individual
  • Panasonic PT-RS11KU | Operating Instructions - Page 84
    Chapter 4 Settings - [PICTURE] menu [USER1] [USER2] [3200K] - [9300K] Adjusts white balance as desired. Refer to "Adjusting desired white balance" (x page 84) for details. Allows you to set in increments of 100 K. Select so that images become natural. Note ff When [PICTURE MODE] (x page 82) is
  • Panasonic PT-RS11KU | Operating Instructions - Page 85
    Chapter 4 Settings - [PICTURE] menu 6) Press the button. ffThe confirmation screen is displayed. 7) Press qw to select [OK], and press the button. ffThe [USER1] or [USER2] data is overwritten. ffIf you press qw to select [CANCEL] and then press the button, the data will not
  • Panasonic PT-RS11KU | Operating Instructions - Page 86
    Chapter 4 Settings - [PICTURE] menu Note ff DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of
  • Panasonic PT-RS11KU | Operating Instructions - Page 87
    Chapter 4 Settings - [PICTURE] menu [NOISE REDUCTION] You can reduce noises when the input image is degraded and noise is occurring in the image signal. 1) Press as to select [NOISE REDUCTION]. 2) Press qw or the button. ffThe [NOISE REDUCTION] individual adjustment screen is displayed. 3)
  • Panasonic PT-RS11KU | Operating Instructions - Page 88
    is gone gg When on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed gg When the operating environment detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching
  • Panasonic PT-RS11KU | Operating Instructions - Page 89
    Chapter 4 Settings - [PICTURE] menu Terminal terminal, terminal For single link For dual link System format Select [AUTO], [480i YCBCR], [576i YCBCR], [720/50p YPBPR], [720/60p YPBPR], [1035/60i YPBPR], [1080/24p YPBPR], [1080/24sF YPBPR], [1080/25p YPBPR], [1080/30p YPBPR],
  • Panasonic PT-RS11KU | Operating Instructions - Page 90
    , ET‑YFB200G) is connected to the terminal, adjust the shift, aspect, and clock phase from the menu of DIGITAL LINK output supported device at first. [SHIFT] Move the image position vertically or horizontally if the image projected on the screen is still out of position even when
  • Panasonic PT-RS11KU | Operating Instructions - Page 91
    Chapter 4 Settings - [POSITION] menu [VID AUTO]*1 [AUTO]*2 [THROUGH] [16:9] [4:3] [H FIT] [V FIT] [HV FIT] The projector identifies the video ID (VID) embedded in the video signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is effective
  • Panasonic PT-RS11KU | Operating Instructions - Page 92
    Chapter 4 Settings - [POSITION] menu When [ASPECT] is set to [DEFAULT] 1) Press as to select [ZOOM]. 2) Press the button. ffThe [ZOOM] screen is displayed. 3) Press as to select [MODE]. 4) Press qw to switch the item. [INTERNAL] [FULL] Enlarges the size within the aspect range set with [
  • Panasonic PT-RS11KU | Operating Instructions - Page 93
    Chapter 4 Settings - [POSITION] menu [PC-1]*1 [PC-2]*1 [PC-3]*1 Performs geometric adjustment using a computer. *1 Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Up to three geometric adjustments performed using the computer can be saved.
  • Panasonic PT-RS11KU | Operating Instructions - Page 94
    [VERTICAL BALANCE] Chapter 4 Settings - [POSITION] menu [CURVED] [HORIZONTAL BALANCE] [MAINTAIN ASPECT RATIO] Select [ON] to correct while keeping the aspect ratio. Setting [CORNER CORRECTION] 1) Press as to select [GEOMETRY]. 2) Press qw to select [CORNER CORRECTION]. 3) Press the
  • Panasonic PT-RS11KU | Operating Instructions - Page 95
    Chapter 4 Settings - [ADVANCED MENU] menu [ADVANCED MENU] menu On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the submenu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. [DIGITAL CINEMA REALITY] You can increase the
  • Panasonic PT-RS11KU | Operating Instructions - Page 96
    has turned green. 1) Press as to select [CLAMP POSITION]. 2) Press qw to adjust. Status The black part is blunt. The black part is green. Rough guide for optimal value The point where bluntness of the black part improves the most is the optimal value. The point where the green part becomes
  • Panasonic PT-RS11KU | Operating Instructions - Page 97
    Chapter 4 Settings - [ADVANCED MENU] menu [EDGE BLENDING] The edge blending function allows multiple projector images to be seamlessly overlapped by using the inclination of the brightness at the overlapped area. 1) Press as to select [EDGE BLENDING]. 2) Press qw to switch the item. ffThe items
  • Panasonic PT-RS11KU | Operating Instructions - Page 98
    Chapter 4 Settings - [ADVANCED MENU] menu 14) Press as to select an item, and press qw to adjust the setting. ffOnce the adjustment is completed, press the button to return to the [BRIGHTNESS ADJUST] screen. 15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].
  • Panasonic PT-RS11KU | Operating Instructions - Page 99
    Chapter 4 Settings - [ADVANCED MENU] menu 2) Press qw to switch the item. ffThe items will switch each time you press the button. [NORMAL] [FAST]*1 [FIXED]*2 Standard setting. Simplifies the image processing to reduce image frame delay. Sets image frame delay to be constant regardless of the
  • Panasonic PT-RS11KU | Operating Instructions - Page 100
    Chapter 4 Settings - [ADVANCED MENU] menu [RASTER POSITION] This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area. 1) Press as to select [RASTER POSITION]. 2) Press the button. ffThe [RASTER POSITION]
  • Panasonic PT-RS11KU | Operating Instructions - Page 101
    Chapter 4 Settings - [DISPLAY LANGUAGE] menu [DISPLAY LANGUAGE] menu On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. Changing the display language You can select the
  • Panasonic PT-RS11KU | Operating Instructions - Page 102
    Chapter 4 Settings - [3D SETTINGS] menu [3D SETTINGS] menu On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. [3D SYSTEM SETTING] Set the image display method
  • Panasonic PT-RS11KU | Operating Instructions - Page 103
    Chapter 4 Settings - [3D SETTINGS] menu Select [6], [7], or [8] for the second and subsequent projectors. ffStereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the right eye. ff"H" is output to the 3D image display and "L" is output to the 2D
  • Panasonic PT-RS11KU | Operating Instructions - Page 104
    Chapter 4 Settings - [3D SETTINGS] menu [SHARED 2D/3D] [SEPARATE 2D/3D] Uses same correction data for 2D signal and 3D signal. Uses different correction data for 2D signal and 3D signal. Note ff Switch the setting of [COLOR MATCHING] (x page 107) while the signal to be adjusted is being input. [
  • Panasonic PT-RS11KU | Operating Instructions - Page 105
    Chapter 4 Settings - [3D SETTINGS] menu Note ff This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE]. ff The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use. [3D FRAME DELAY] Adjust the
  • Panasonic PT-RS11KU | Operating Instructions - Page 106
    commercial applications, someone in authority should convey the following precautions. To enjoy 3D images safely and comfortably, please refer to the Operating Instructions for in-depth description. 3D SAFETY PRECAUTIONS 2/2 Please refrain from viewing 3D images if you do not feel well or are
  • Panasonic PT-RS11KU | Operating Instructions - Page 107
    Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projector or by a service person. ff Pressing the button on the remote control will restore the factory default settings for all items. ff When [COLOR MATCHING
  • Panasonic PT-RS11KU | Operating Instructions - Page 108
    Chapter 4 Settings - [DISPLAY OPTION] menu 4) Press as to select [MEASURED DATA]. 5) Press the button. ffThe [MEASURED DATA] screen is displayed. 6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter. 7) Press as to select a color, and press qw
  • Panasonic PT-RS11KU | Operating Instructions - Page 109
    Chapter 4 Settings - [DISPLAY OPTION] menu Model No. PT‑RS11K [SCREEN FORMAT] [4:3] [16:9] Range when [SCREEN POSITION] is selected Cannot be adjusted. Adjusts the vertical position between ‑132 and 131. 4) Press as to select [SCREEN POSITION]. ff[SCREEN POSITION] cannot be selected or adjusted
  • Panasonic PT-RS11KU | Operating Instructions - Page 110
    Chapter 4 Settings - [DISPLAY OPTION] menu 2) Press the button. ffThe [AUTO SETUP] screen is displayed. 3) Press as to select [POSITION ADJUST]. 4) Press qw to switch the item. [ON] [OFF] Adjust the screen position and size when automatic setup is executed. Does not perform automatic
  • Panasonic PT-RS11KU | Operating Instructions - Page 111
    switch to the backup input signal using the backup function again, switch to the primary input. ff [BACKUP INPUT STATUS] is displayed in the input guide (x page 118) and [STATUS] screen (x pages 73, 142) when [BACKUP INPUT MODE] is set to anything other than [OFF]. When switching to the backup input
  • Panasonic PT-RS11KU | Operating Instructions - Page 112
    Chapter 4 Settings - [DISPLAY OPTION] menu [SIMUL INPUT SETTING] [AUTO(2D)]*1 Usage of the input signal [1st FRAME INPUT] [2nd FRAME INPUT] Details Uses the signal for the corresponding input as a signal for the odd frame. Uses the signal for the corresponding input as a signal for the even frame
  • Panasonic PT-RS11KU | Operating Instructions - Page 113
    using a conversion cable, etc. Note ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. ff The data for Plug and play will change when the setting is
  • Panasonic PT-RS11KU | Operating Instructions - Page 114
    Setting [EDID MODE] Chapter 4 Settings - [DISPLAY OPTION] menu 1) Press as to select [DVI-D IN]. 2) Press the button. ffThe [DVI-D IN] screen is displayed. 3) Press as to select [EDID MODE]. 4) Press the button. ffThe [DVI-D EDID MODE] screen is displayed. 5) Press qw to switch [
  • Panasonic PT-RS11KU | Operating Instructions - Page 115
    to the terminal. Note ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. ff The HDMI signal level is displayed for 30 bits of input. Setting
  • Panasonic PT-RS11KU | Operating Instructions - Page 116
    twisted-pair-cable transmitter. Note ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. ff The signal level is displayed for 30 bits of input. Setting
  • Panasonic PT-RS11KU | Operating Instructions - Page 117
    Chapter 4 Settings - [DISPLAY OPTION] menu ff After configuring settings, your computer or video device or the projector may be required to be turned off and on. ff A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video
  • Panasonic PT-RS11KU | Operating Instructions - Page 118
    Chapter 4 Settings - [DISPLAY OPTION] menu 3) Press as to select [3G-SDI MAPPING]. 4) Press qw to switch the item. [AUTO] [LEVEL A] [LEVEL B] Automatically select [LEVEL A] or [LEVEL B]. Fixes to [LEVEL A]. Fixes to [LEVEL B]. Note ff This does not operate when the SD‑SDI signal or the HD‑SDI
  • Panasonic PT-RS11KU | Operating Instructions - Page 119
    ]. 4) Press qw to switch the item. ffThe items will switch each time you press the button. [ON] [OFF] Displays the input guide. Hides the input guide. Setting [WARNING MESSAGE] Set the display/hide of the warning message. 1) Press as to select [ON-SCREEN DISPLAY]. 2) Press the button
  • Panasonic PT-RS11KU | Operating Instructions - Page 120
    Chapter 4 Settings - [DISPLAY OPTION] menu [OFF] Hides the warning message. Note ff When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status such as [TEMPERATURE WARNING] or [CLEAN THE AIR FILTER] is detected. Also, the
  • Panasonic PT-RS11KU | Operating Instructions - Page 121
    Chapter 4 Settings - [DISPLAY OPTION] menu [UNIFORMITY] Correct the brightness and color unevenness of the entire screen. Setting each color 1) Press as to select [UNIFORMITY]. 2) Press the button. ffThe [UNIFORMITY] screen is displayed. 3) Press as to select [WHITE], [RED], [GREEN], or [
  • Panasonic PT-RS11KU | Operating Instructions - Page 122
    Chapter 4 Settings - [DISPLAY OPTION] menu 4) Press qw to switch the item. [ENABLE] [DISABLE] Turns off the light source and closes the mechanical shutter when the shutter function is enabled (shutter: closed). Leaves the mechanical shutter open and turns off only the light source when the
  • Panasonic PT-RS11KU | Operating Instructions - Page 123
    Chapter 4 Settings - [DISPLAY OPTION] menu [OPEN] [CLOSE] The projector goes into standby mode with the mechanical shutter opened when the projector is switched off. The projector goes into standby mode with the mechanical shutter closed when the projector is switched off. [FREEZE] Pause the
  • Panasonic PT-RS11KU | Operating Instructions - Page 124
    Chapter 4 Settings - [DISPLAY OPTION] menu 1) Select "Select line (luminance)" on the waveform monitor. 2) Adjust black level. ffUse [BRIGHTNESS] in the on-screen menu [PICTURE] to adjust the black level 0 % of the video signal to the 0 % position of the waveform monitor. 3) Adjust white level.
  • Panasonic PT-RS11KU | Operating Instructions - Page 125
    Chapter 4 Settings - [PROJECTOR SETUP] menu [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the submenu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. [PROJECTOR ID] The projector has an ID
  • Panasonic PT-RS11KU | Operating Instructions - Page 126
    Chapter 4 Settings - [PROJECTOR SETUP] menu [ECO]*1 [LONG LIFE1]*1 [LONG LIFE2]*1 [LONG LIFE3]*1 [USER1] [USER2] [USER3] Set this item to increase the life of the light source though it will lower the luminance than [NORMAL]. The estimated runtime is approximately 24 000 hours. Set this item to
  • Panasonic PT-RS11KU | Operating Instructions - Page 127
    Chapter 4 Settings - [PROJECTOR SETUP] menu 3) Press as to select [LIGHT OUTPUT]. 4) Press qw to adjust. Operation Press w. Press q. Adjustment Brightness Runtime (estimate) The screen becomes brighter. The runtime becomes shorter. The screen becomes darker. The runtime becomes longer.
  • Panasonic PT-RS11KU | Operating Instructions - Page 128
    Chapter 4 Settings - [PROJECTOR SETUP] menu Setting [BRIGHTNESS CONTROL SETUP] Set the operation of the brightness control function. The [BRIGHTNESS CONTROL SETUP] setting is synchronized with the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS CONTROL SETUP]. The most recent setting
  • Panasonic PT-RS11KU | Operating Instructions - Page 129
    Chapter 4 Settings - [PROJECTOR SETUP] menu 14) Press the button. ffWhen [CONSTANT MODE] in [BRIGHTNESS CONTROL SETUP] is set to anything other than [OFF], the brightness and white balance of light source at the time when the button is pressed is recorded as the standard brightness
  • Panasonic PT-RS11KU | Operating Instructions - Page 130
    Chapter 4 Settings - [PROJECTOR SETUP] menu [BRIGHTNESS CONTROL] The projector is equipped with a brightness sensor to measure brightness and color of the light source, and corrects brightness and white balance of the projected image according to the changes in brightness and color of the light
  • Panasonic PT-RS11KU | Operating Instructions - Page 131
    Chapter 4 Settings - [PROJECTOR SETUP] menu ffBrightness and color are measured at the specified time. The dynamic contrast function does not operate during measurement. 13) Press as to select [CALIBRATION MESSAGE]. 14) Press qw to switch the item. ffThe items will switch each time you press the
  • Panasonic PT-RS11KU | Operating Instructions - Page 132
    Chapter 4 Settings - [PROJECTOR SETUP] menu [BRIGHTNESS CONTROL STATUS] screen display example When [CONSTANT MODE] of [BRIGHTNESS CONTROL SETUP] is set to [OFF] The screen shows the status that the brightness control is disabled. BRIGHTNESS CONTROL STATUS CONSTANT MODE OFF PROJECTOR 1 MENU
  • Panasonic PT-RS11KU | Operating Instructions - Page 133
    rights to all projectors to be linked. ff The projector is in standby. Switch on the power. ff There is a problem with the brightness sensor. If problems persist even after switching on the power, consult your dealer. *1 "Multi Monitoring & Control Software" is included in the supplied CD
  • Panasonic PT-RS11KU | Operating Instructions - Page 134
    Chapter 4 Settings - [PROJECTOR SETUP] menu 12) Adjust [LIGHT OUTPUT] of each projector. ffAdjust [LIGHT OUTPUT] of all the other projectors so that the brightness will be the same as the projector with the least brightness. 13) Set [CONSTANT MODE] of [BRIGHTNESS CONTROL SETUP] to [AUTO], and [LINK
  • Panasonic PT-RS11KU | Operating Instructions - Page 135
    is input gg When on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed gg When the power on transmitter to the specified input. *1 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to
  • Panasonic PT-RS11KU | Operating Instructions - Page 136
    Chapter 4 Settings - [PROJECTOR SETUP] menu 3) Press as to select [TIME ZONE]. 4) Press qw to switch [TIME ZONE]. Setting the date and time manually 1) Press as to select [DATE AND TIME]. 2) Press the button. ffThe [DATE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK].
  • Panasonic PT-RS11KU | Operating Instructions - Page 137
    Chapter 4 Settings - [PROJECTOR SETUP] menu How to assign a program 1) Press as to select [SCHEDULE]. 2) Press qw to select [ON], and press the button. ffThe [SCHEDULE] screen is displayed. 3) Select and assign a program to each day of week. ffPress as to select the day of week, and press
  • Panasonic PT-RS11KU | Operating Instructions - Page 138
    the sub-screen with the settings of [USER2]. Lays out the sub-screen with the settings of [USER3]. *1 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector, its input name is automatically reflected from [INPUT1] to [INPUT10]. When
  • Panasonic PT-RS11KU | Operating Instructions - Page 139
    Chapter 4 Settings - [PROJECTOR SETUP] menu [9600] [19200] [38400] Select the proper speed. 7) Press as to select [(IN) PARITY]. 8) Press qw to switch the item. ffThe items will switch each time you press the button. [NONE] [EVEN] [ODD] Select the parity condition. Setting the communication
  • Panasonic PT-RS11KU | Operating Instructions - Page 140
    to [DIGITAL LINK], communication using that serial terminal is available only when the corresponding device (such as the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G)) is connected to the terminal. ff When transferring logos via the optional
  • Panasonic PT-RS11KU | Operating Instructions - Page 141
    Chapter 4 Settings - [PROJECTOR SETUP] menu 3) Press the button. ffThe confirmation screen is displayed. 4) Press qw to select [OK], and press the button. ffTo cancel, select [CANCEL]. ffThe lens moves up, down, left, and right to detect the lens shift limit value, and automatically
  • Panasonic PT-RS11KU | Operating Instructions - Page 142
    Chapter 4 Settings - [PROJECTOR SETUP] menu ff The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary. Beware of shift, as errors in zoom position are particularly significant. ff When a lens is replaced, readjust and save the lens memory again. ff If a
  • Panasonic PT-RS11KU | Operating Instructions - Page 143
    Chapter 4 Settings - [PROJECTOR SETUP] menu 3) Press qw to switch the pages. ffThe page will change each time you press the button. [PROJECTOR TYPE] Displays the projector type and serial number of the projector. [PROJECTOR RUNTIME] Displays the runtime of the projector. [LIGHT RUNTIME]
  • Panasonic PT-RS11KU | Operating Instructions - Page 144
    Chapter 4 Settings - [PROJECTOR SETUP] menu 2) Press qw to switch the item. ffThe items will switch each time you press the button. [OFF] [ON] Disables the AC voltage monitor function. Enables the AC voltage monitor function. Note ff When [ON] is set, the value of the input supply voltage is
  • Panasonic PT-RS11KU | Operating Instructions - Page 145
    . Note ff Even when [ALL USER DATA] is executed, the settings of [UNIFORMITY], [OPERATING MODE], [MAX LIGHT OUTPUT LEVEL], and [STANDBY MODE] are not initialized. [SERVICE PASSWORD] This function is used by
  • Panasonic PT-RS11KU | Operating Instructions - Page 146
    Chapter 4 Settings - [P IN P] menu [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. Using P IN P function Locate a separate, small sub screen in the
  • Panasonic PT-RS11KU | Operating Instructions - Page 147
    Chapter 4 Settings - [P IN P] menu 16) Press qw to switch the item. [MAIN WINDOW] [SUB WINDOW] The main window has display priority. The sub window has display priority. Note ff The P IN P function may not be available for some signals being input or terminals being selected. Refer to "Two-
  • Panasonic PT-RS11KU | Operating Instructions - Page 148
    Chapter 4 Settings - [TEST PATTERN] menu [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. [TEST PATTERN] Display the test pattern built-in to the projector. Settings of
  • Panasonic PT-RS11KU | Operating Instructions - Page 149
    Chapter 4 Settings - [SIGNAL LIST] menu [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. rrRegistered signal details Memory number: A1 (1-2) Sub memory number When the address
  • Panasonic PT-RS11KU | Operating Instructions - Page 150
    Chapter 4 Settings - [SIGNAL LIST] menu 3) Press the button. ffThe selected signal will be deleted. Note ff A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen. Protecting the registered signal 1) Press asqw to select the signal to
  • Panasonic PT-RS11KU | Operating Instructions - Page 151
    Chapter 4 Settings - [SIGNAL LIST] menu ff When a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority. Example: a signal to be input that corresponds to memory numbers A2, A4 and B1 will be determined to be B1. ff When a
  • Panasonic PT-RS11KU | Operating Instructions - Page 152
    Chapter 4 Settings - [SECURITY] menu [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen. ffWhen the projector is used for the first time Initial
  • Panasonic PT-RS11KU | Operating Instructions - Page 153
    Chapter 4 Settings - [SECURITY] menu 2) Press qw to switch the item. ffThe items will switch each time you press the button. [OFF] [TEXT] [USER LOGO] Hides the security message. Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. Displays the image registered by the user. Note ff To
  • Panasonic PT-RS11KU | Operating Instructions - Page 154
    Chapter 4 Settings - [SECURITY] menu 4) Press the button. ffThe [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed. 5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL]. 6) Press qw to switch [USER]. 7) Press as to select the button item to set. ffWhen [INPUT SELECT
  • Panasonic PT-RS11KU | Operating Instructions - Page 155
    Chapter 4 Settings - [SECURITY] menu 4) Press asqw to select [OK], and press the button. ffTo cancel, select [CANCEL]. Attention ff The initial password is "AAAA" by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 144) is executed. ff Change the password periodically that
  • Panasonic PT-RS11KU | Operating Instructions - Page 156
    communication method, set [DIGITAL LINK MODE] to [LONG REACH]. ff Connection will not be made correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGITAL LINK MODE] is set to [LONG REACH]. [DIGITAL LINK SETUP] Set the communication method of
  • Panasonic PT-RS11KU | Operating Instructions - Page 157
    then press the button. Note ff The projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable as to select an item, and change the settings according to the operation instructions of the menu. [PROJECTOR NAME] Allows to change the projector name.
  • Panasonic PT-RS11KU | Operating Instructions - Page 158
    Electronics to the terminal. The [EXTRON XTP] setting must be set to [OFF] when connecting the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G). For details of the "XTP transmitter", visit the website of Extron Electronics. URL http://www.extron
  • Panasonic PT-RS11KU | Operating Instructions - Page 159
    connected DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details. Note you press the button. [OFF] [ON(2.X.X.X)] [ON(10.X.X.X)] [ON(MANUAL)] Disables the Art-Net function. Enables the Art-Net function and sets
  • Panasonic PT-RS11KU | Operating Instructions - Page 160
    . ffSetting and adjustment of the projector ffDisplay of the projector status ffSending E-mail messages when there is a problem with the projector The projector supports "Crestron ConnectedTM", and the following application software of Crestron Electronics, Inc. can be used. ffRoomView Express
  • Panasonic PT-RS11KU | Operating Instructions - Page 161
    ) LAN cable (straight) Hub ff A web browser is required to use this function. Confirm that the web browser can be used beforehand. Supported browser: Internet Explorer 8.0/9.0/10.0/11.0 (Windows OS), Safari 6.0/7.0/8.0 (Mac OS) ff Communication with an E-mail server is required to use the E-mail
  • Panasonic PT-RS11KU | Operating Instructions - Page 162
    transmit up to 150 m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. If this distance is exceeded, image may all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective
  • Panasonic PT-RS11KU | Operating Instructions - Page 163
    white for a moment, but it is not a malfunction. ff Screenshot of a computer The size or the display of the screen may be different from this manual depending on the OS or the Web browser you use. ENGLISH - 163
  • Panasonic PT-RS11KU | Operating Instructions - Page 164
    Descriptions of items Chapter 4 Settings - [NETWORK] menu 1 2 3 4 5 6 1 Page tab Switches pages by clicking this item. 2 [Status] The status of the projector is displayed by clicking this item. 3 [Projector control] The [Projector control] page is displayed by clicking this item. 4 [Detailed set
  • Panasonic PT-RS11KU | Operating Instructions - Page 165
    Chapter 4 Settings - [NETWORK] menu [Projector status] page Click [Status] → [Projector status]. Display the status of the projector for the following items. 1 7 2 8 3 9 4 5 10 6 11 12 13 14 15 16 17 1 [PROJECTOR TYPE] Displays the type of the projector. 2 [MAIN VERSION] Displays the
  • Panasonic PT-RS11KU | Operating Instructions - Page 166
    . 1 Self-diagnosis result display Displays the item check results. [OK]: Indicates that operation is normal. [FAILED]: Indicates that there is a problem. [WARNING]: Indicates that there is a warning. rr[FAILED] items [MAIN CPU BUS] [FAN] Item [INTAKE AIR TEMPERATURE] [OPTICS MODULE TEMPERATURE
  • Panasonic PT-RS11KU | Operating Instructions - Page 167
    [BRIGHTNESS SENSOR] [PHOSPHOR WHEEL1] [PHOSPHOR WHEEL2] [FILTER UNIT] Description There is a problem with the luminance sensor. If problems persist even after switching on the power, consult your dealer. There is a problem with the phosphor wheel 1 or phosphor wheel 1 drive circuit. Consult your
  • Panasonic PT-RS11KU | Operating Instructions - Page 168
    Chapter 4 Settings - [NETWORK] menu [Access error log] page Click [Status] → [Access error log]. The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords. [Mail error log] page Click [Status] → [Mail error log]. E-
  • Panasonic PT-RS11KU | Operating Instructions - Page 169
    Chapter 4 Settings - [NETWORK] menu [Basic control] page Click [Projector control] → [Basic control]. 1 2 3 4 5 6 1 [POWER] Turns on/off the power. 2 [SHUTTER] Switches whether to use the shutter function (enabled (shutter: closed)/disabled (shutter: open)). 3 [OSD] Switches on (display)/off (hide
  • Panasonic PT-RS11KU | Operating Instructions - Page 170
    Chapter 4 Settings - [NETWORK] menu [Network config] page Click [Detailed set up] → [Network config]. ffClick [Network config] to display the [CAUTION!] screen. ffThe current settings are displayed by pressing the [Next] button. ffClick [Change] to display the setting change screen. 1 2 3 4 5 6 7 8
  • Panasonic PT-RS11KU | Operating Instructions - Page 171
    time automatically. 4 [NTP SERVER NAME] Enter the IP address or server name of the NTP server when you set to adjust the date and time manually. (To enter the server name, the DNS server needs to be set up.) 5 [Date] Enter the date to be changed. 6 [Time] Enter the time to
  • Panasonic PT-RS11KU | Operating Instructions - Page 172
    Chapter 4 Settings - [NETWORK] menu [E-mail set up] page Send an E-mail to preset E-mail addresses (up to two addresses) when a problem has occurred. Click [Detailed set up] → [E-mail set up]. 1 2 3 4 5 6 1 [ENABLE] Select [Enable] to use the E-mail function. 2 [SMTP SERVER NAME] Enter the IP
  • Panasonic PT-RS11KU | Operating Instructions - Page 173
    Chapter 4 Settings - [NETWORK] menu 7 8 7 8 7 [E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2] Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 2] blank when two E-mail addresses are not to be used. 9 8 Settings of the conditions to send E-mail Select the conditions to send E-mail. [MAIL
  • Panasonic PT-RS11KU | Operating Instructions - Page 174
    to send an E-mail. Click [Detailed set up] → [Authentication set up]. 1 2 3 4 5 6 7 8 1 [Auth] Select the authentication method specified by your Internet service provider. 2 [SMTP Auth] Set when the SMTP authentication is selected. 3 [POP server name] Enter the POP server name. Allowed characters
  • Panasonic PT-RS11KU | Operating Instructions - Page 175
    Contents of E-mail sent Chapter 4 Settings - [NETWORK] menu Example of the E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : RZ12K Serial No : 123456789012 ----- E-mail
  • Panasonic PT-RS11KU | Operating Instructions - Page 176
    Chapter 4 Settings - [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : RZ12K Serial No : 123456789012 ----- check system ----- MAIN CPU BUS [ FAILED ] FAN [ OK ]
  • Panasonic PT-RS11KU | Operating Instructions - Page 177
    [Change password] page Click [Change password]. Chapter 4 Settings - [NETWORK] menu 1 2 3 1 [Administrator] Used to change the setting of the [Administrator]. 2 [User] Used to change the setting of the [User]. [Administrator] account 1 [Account] Displays the account to change. 2 [Current] [User
  • Panasonic PT-RS11KU | Operating Instructions - Page 178
    clicking [Crestron Connected(TM)]. It is not displayed if Adobe Flash Player is not installed on your computer, or the browser you use does not support Flash. In such a case, click [Back] in the operation page to go back to the previous page. 178 - ENGLISH
  • Panasonic PT-RS11KU | Operating Instructions - Page 179
    Operation page Chapter 4 Settings - [NETWORK] menu 1 2 3 4 5 1 [Tools], [Info], [Help] Tabs for selecting the setting, information, or help page of the projector. 2 [POWER] Turns on/off the power. 3 [SHUTTER] Switches whether to use the shutter function (enabled (shutter: closed)/disabled (shutter
  • Panasonic PT-RS11KU | Operating Instructions - Page 180
    Chapter 4 Settings - [NETWORK] menu [Info] page Click [Info] in the operation page. 1 4 5 2 3 6 7 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp1 Hours], [Lamp2 Hours] Displays the runtime of the light source 1 and the light source 2. 4 [
  • Panasonic PT-RS11KU | Operating Instructions - Page 181
    Chapter 5 Maintenance This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units. ENGLISH - 181
  • Panasonic PT-RS11KU | Operating Instructions - Page 182
    in red. Check the status of the indicators and take following measures. Attention ff When switching off the projector to deal with problems, make sure to follow the procedure in "Switching off the projector" (x page 63). Light source indicator Light source indicator Temperature
  • Panasonic PT-RS11KU | Operating Instructions - Page 183
    Chapter 5 Maintenance - Light source/temperature/filter indicators Temperature indicator Indicator status Status Cause Solution Lighting in red Blinking in red (2 times) Warm-up status Internal temperature is high Internal temperature is high (warning). (standby status). ff Did you
  • Panasonic PT-RS11KU | Operating Instructions - Page 184
    , or rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case. ffWhen using chemically treated dust cloths, follow the instructions written on its packaging. Lens front surface Wipe off dirt and dust from the front surface of the lens with a soft clean cloth
  • Panasonic PT-RS11KU | Operating Instructions - Page 185
    Chapter 5 Maintenance - Maintenance/replacement ffAfter pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port of the projector body if there are any. (Fig. 3) Cleaning the air filter unit Remove the air filter unit
  • Panasonic PT-RS11KU | Operating Instructions - Page 186
    Chapter 5 Maintenance - Maintenance/replacement Note ff Make sure that the air filter unit is properly attached before using the projector. If it is not properly attached, the projector will suck in dirt and dust causing a malfunction. ff If you use the projector without attaching the air filter
  • Panasonic PT-RS11KU | Operating Instructions - Page 187
    - Troubleshooting Troubleshooting Review the following points. For details, see the corresponding pages. Problems Power F10" simultaneously. Since the method varies depending on the computer type, refer to the user manual provided with your computer.) ff Is the [EDID SELECT] setting in [DVI-D IN]
  • Panasonic PT-RS11KU | Operating Instructions - Page 188
    Chapter 5 Maintenance - Troubleshooting Problems Cannot control the projector with Art-Net. setting of [3D SETTINGS] correct? ff Check the 3D eyewear settings. ff Is a signal which is supported by the projector being input? ff Is it synchronized? Check the 3D eyewear settings. ff Change the [LEFT
  • Panasonic PT-RS11KU | Operating Instructions - Page 189
    Chapter 5 Maintenance - Self-diagnosis display Self-diagnosis display There is a self-diagnosis display on the side of the projector. Self-diagnosis display will automatically display the value of the input supply voltage, or details of errors or warnings when they occur. (x page 29) The following
  • Panasonic PT-RS11KU | Operating Instructions - Page 190
    Chapter 5 Maintenance - Self-diagnosis display Error/warning display F50 F51 F52 F53 F54 F55 F56 F57 F58 F59 F61 F62 F70 F71 F72 F73 F74 F75 F76 F96 FA8 FC8 FE1 FE2 FE3 FE4 FE5 FE6 FE7 FE8 FE9 FF0 FF1 FF2 FF3 FF4 FF5 FF6 FF7 FH0 FH1 FH2 FH3 FJ0 FJ1 FL1 FL2 Details Radiator fan 1 warning Radiator
  • Panasonic PT-RS11KU | Operating Instructions - Page 191
    Chapter 6 Appendix This chapter describes specifications and after-sales service for the projector. ENGLISH - 191
  • Panasonic PT-RS11KU | Operating Instructions - Page 192
    Chapter 6 Appendix - Technical information Technical information PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands The
  • Panasonic PT-RS11KU | Operating Instructions - Page 193
    and Information System Industries Association. URL http://pjlink.jbmia.or.jp/english/ Using Art-Net function Since the network function of the projector supports the Art-Net function, you can control the projector settings with the DMX controller and application software using the Art-Net protocol
  • Panasonic PT-RS11KU | Operating Instructions - Page 194
    Chapter 6 Appendix - Technical information Control details INPUT SELECT (when [2] or [USER] is selected) LENS POSITION LENS H SHIFT LENS V SHIFT LENS FOCUS LENS ZOOM LENS FUNCTION SELECT (when [1] is selected) LENS CONTROL (when [1] is selected) Performance No operation RGB1 RGB2 DVI‑D HDMI
  • Panasonic PT-RS11KU | Operating Instructions - Page 195
    Control details POWER SHUTTER FADE-IN FADE-OUT (when [1] is selected) GEOMETRY CUSTOM MASKING FREEZE COLOR TINT RASTER PATTERN Chapter 6 Appendix - Technical information Performance Standby No operation Power on SHUTTER: Open No operation SHUTTER: Close 0.0s 0.5s 1.0s 1.5s 2.0s 2.5s 3.0s 3.5s 4.0s
  • Panasonic PT-RS11KU | Operating Instructions - Page 196
    Chapter 6 Appendix - Technical information Control details ENABLE/DISABLE Performance Disable Enable Parameter 0‑127 128‑255 Default value 0 Remark When "Disable" is set, operations of all channels become unacceptable. Note ff If the projector is operated with the remote control or on the
  • Panasonic PT-RS11KU | Operating Instructions - Page 197
    Chapter 6 Appendix - Technical information Command transmission method Transmit using the following command formats. rrTransmitted data Command example Data length Header Hash value (Refer to "Connecting" above) 32 bytes '0' 0x30 1 byte '0' 0x30 1 byte Data section Control command (ASCII
  • Panasonic PT-RS11KU | Operating Instructions - Page 198
    Chapter 6 Appendix - Technical information Command transmission method Transmit using the following command formats. rrTransmitted data Header Command example Data length '0' 0x30 1 byte '0' 0x30 1 byte ffExample: Transmission of power supply status acquisition command "00QPW" (CR) rrReceived
  • Panasonic PT-RS11KU | Operating Instructions - Page 199
    Chapter 6 Appendix - Technical information / terminal The / terminal of the projector conforms with RS‑232C so that the projector can be connected to and controlled from a computer. Connection Single projector Projector connecting terminals D-Sub
  • Panasonic PT-RS11KU | Operating Instructions - Page 200
    D‑Sub 9-pin (male) Outside view (9) (6) (5) (1) Chapter 6 Appendix - Technical information Pin No. (1) (2) (3) (4) (5) (6) (7) (8) (9) Signal name ― RXD TXD ― GND ― RTS CTS ― Details NC Received data Transmitted data NC Earth NC Connected internally NC Communication conditions (Factory
  • Panasonic PT-RS11KU | Operating Instructions - Page 201
    computer. ff If an invalid parameter is sent, the "ER402" response is sent from the projector to the computer. ff ID transmission in RS‑232C supports ZZ (ALL) and 01 to 64, as well as 0A to 0Z groups. ff If a command is sent with an ID designated, a response will be
  • Panasonic PT-RS11KU | Operating Instructions - Page 202
    Chapter 6 Appendix - Technical information Control command The following table lists the commands that can be used to control the projector using a computer. rrProjector control command Command Details PON POF Power on Power standby QPW Power query IIS Switching the input signal OSH QSH
  • Panasonic PT-RS11KU | Operating Instructions - Page 203
    Chapter 6 Appendix - Technical information terminal It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach. Use the terminal on the connecting terminals of the
  • Panasonic PT-RS11KU | Operating Instructions - Page 204
    , 1080/24p, 1080/25p, 1080/30p, 1080/50p, 1080/60p *2 640 x 480 - 1 920 x 1 200 Non-interlaced signal, dot clock frequency: 25 MHz - 162 MHz *3 Only supports 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24sF, 1080/24p, 1080/25p, 1080/30p, 1080/50p, and 1080/60p *4 Dual link
  • Panasonic PT-RS11KU | Operating Instructions - Page 205
    Chapter 6 Appendix - Technical information Control device password To initialize your password, consult your distributor. Upgrade Kit If the optional Upgrade Kit (Model No.: ET‑UK20) is applied, the following functions are extended. Function Adjustment range of [VERTICAL KEYSTONE] Adjustment
  • Panasonic PT-RS11KU | Operating Instructions - Page 206
    Chapter 6 Appendix - Technical information List of compatible signals The following table specifies the video signals compatible with the projector. ffSymbols that indicate formats are as follows. ggV: VIDEO, Y/C ggR: RGB ggY: YCBCR/YPBPR ggD: DVI‑D ggH: HDMI ggS: SDI Compatible signal NTSC/NTSC4
  • Panasonic PT-RS11KU | Operating Instructions - Page 207
    Compatible signal 1024 x 768 1152 x 864 1152 x 870 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1366 x 768 1400 x 1050 1440 x 900 1600 x 900 1600 x 1200 1680 x 1050 1920 x 1080 Chapter 6 Appendix - Technical information Resolution (Dots) 1 024 x 768 1 024 x 768 1 024 x 768 1 024 x 768 1
  • Panasonic PT-RS11KU | Operating Instructions - Page 208
    .0 MHz) only *4 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal. *5 Dual link HD‑SDI is supported. *6 Dual link 3G‑SDI is supported. *7 Image is displayed as 3D image in the frame sequential format when [3D INPUT FORMAT] is set to [AUTO]. To display images in
  • Panasonic PT-RS11KU | Operating Instructions - Page 209
    Chapter 6 Appendix - Technical information List of 3D compatible signals The following table specifies the 3D compatible video signals that the projector can project. ffAbbreviations for input formats and 3D formats in the table have the following meanings. ggFP: Frame packing format ggSBS: Side
  • Panasonic PT-RS11KU | Operating Instructions - Page 210
    .0 60.0 Dot clock freq. (MHz) 162.0 131.5 146.3 119.5 141.5 138.5 158.3 154.0 HDMI FP SBS*1 TB DVI‑D FS SBS*1 TB LBL FS ―l l l l l l l l―l― *1 Supports half. *2 VESA CVT RB (Reduced Blanking) compliant 3D compatible signal 720/60p 720/50p 1080/60i 1080/50i 1080/24p 1080/24sF 1080/25p
  • Panasonic PT-RS11KU | Operating Instructions - Page 211
    131.5 146.3 119.5 141.5 138.5 158.3 154.0 RGB1/RGB2 SDI1/SDI2 H‑D R1‑2 S1‑2 SBS*1 TB LBL FS SBS*1 TB LBL 3G l l l l l l l ll― l ―l ll― *1 Supports half. *2 VESA CVT RB (Reduced Blanking) compliant Note ff DIGITAL LINK input compatible signal is the same as HDMI input compatible signal
  • Panasonic PT-RS11KU | Operating Instructions - Page 212
    Chapter 6 Appendix - Specifications Specifications The specifications of the projector are as follows. Power supply 100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz 1 200 W (12.0 A - 6.0 A) Power consumption When [STANDBY MODE] is set to [ECO]: 0.3 W When [STANDBY MODE] is
  • Panasonic PT-RS11KU | Operating Instructions - Page 213
    1125 (1080)/50p Horizontal: 67.5 kHz, Vertical: 60 Hz Horizontal: 56.25 kHz, Vertical: 50 Hz ff The SYNC/HD and VD terminals do not support 3 value SYNC. 525i (480i)*1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p
  • Panasonic PT-RS11KU | Operating Instructions - Page 214
    Chapter 6 Appendix - Specifications rrTerminal terminal terminal terminal terminal terminal terminal terminal terminal / terminal / terminal <
  • Panasonic PT-RS11KU | Operating Instructions - Page 215
    Dimensions Unit: mm Chapter 6 Appendix - Dimensions 725 (28-17/32") 15 (19/32") 53.5 (2-3/32") 289 (11-3/8") 242 (9-17/32") 484 (19-1/16") 578 (22-3/4") * Actual dimensions may differ depending on the product. 142 (5-19/32") 637 (25-3/32") 270 (10-5/8") ENGLISH - 215
  • Panasonic PT-RS11KU | Operating Instructions - Page 216
    wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or impact screwdrivers. ffRead the Installation Instructions of the Ceiling Mount Bracket for details. ffThe model numbers of accessories and optional accessories are subject to change without prior
  • Panasonic PT-RS11KU | Operating Instructions - Page 217
    SERIAL IN> terminal  199 [DATE AND TIME]  135 Main power switch  28, 55 terminal  199 button Maintenance  184 [SERVICE PASSWORD]  145 Remote control  26, 77 button Setting ID number of the remote control  74 Deleting the registered signal
  • Panasonic PT-RS11KU | Operating Instructions - Page 218
    indicator  182 [TEST PATTERN]  80, 148 button Remote control  26, 73 [TEXT CHANGE]  153 [TINT]  83 Troubleshooting  187 Two-window  204 U [UNIFORMITY]  121 Upgrade Kit  205 V button Remote control  26, 70 W [WAVEFORM MONITOR]  123
  • Panasonic PT-RS11KU | Operating Instructions - Page 219
    waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
Thank you for purchasing this Panasonic product.
■
This manual is common to all the models regardless of suffixes of the Model No.
z
for India
PT-RZ12KD / PT-RS11KD
z
for other countries or regions
PT-RZ12K
/
PT-RS11K
■
Before operating this product, please read the instructions carefully and save this manual
for future use.
■
Before using this product, be sure to read “Read this first!” (
x
pages 5 to 14).
TQBJ0904
DLP™ Projector
Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No.
PT-RZ12K
PT-RS11K
The projection lens is sold separately.