Panasonic PT-RS30K Operating Instruction
Panasonic PT-RS30K Manual
 |
View all Panasonic PT-RS30K manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT-RS30K manual content summary:
- Panasonic PT-RS30K | Operating Instruction - Page 1
Operating Instructions Functional Manual DLP™ Projector Commercial Use Model No. PT-RZ31K PT-RS30K The projection lens is sold separately. Thank you for purchasing this Panasonic product. ■■ This manual is common to all the models regardless of suffixes of the Model No. zzfor India PT-RZ31KD zzfor - Panasonic PT-RS30K | Operating Instruction - Page 2
installing 17 When the initial setting screen is displayed 61 Cautions when setting up the projector 18 Making adjustments and selections 67 Security 21 Switching off the projector 68 DIGITAL LINK 22 Projecting 69 Art-Net 22 Selecting the input signal 69 Early - Panasonic PT-RS30K | Operating Instruction - Page 3
142 [FRAME LOCK] 106 [NO SIGNAL SHUT-OFF] 142 [RASTER POSITION] 106 [SCHEDULE] 144 [3D SYNC SETTING] 108 [MULTI PROJECTOR SYNC] 146 [3D INPUT FORMAT] 109 [RS-232C ALL USER DATA] 156 [INITIALIZE] 156 [SERVICE PASSWORD] 157 [P IN P] menu 158 Using - Panasonic PT-RS30K | Operating Instruction - Page 4
193 When an indicator lights up 193 Maintenance/replacement 196 Before performing maintenance/replacement 196 Maintenance 196 Maintenance of filter 196 Replacing the unit 202 Troubleshooting 204 Self-diagnosis display 206 4 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 5
OR MOISTURE. WARNING: RISK OF ELECTRIC SHOCK. DON'T OPEN Indicated on the projector The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to of important operating and maintenance (servicing) instructions in the literature accompanying the product. ENGLISH - 5 - Panasonic PT-RS30K | Operating Instruction - Page 6
this first! WARNING: Do not look at the light emitted from the lens while the projector is being used. Indicated on the projector Notice on laser (for USA and Canada) This projector is the Class 3R laser product that complies with IEC 60825-1:2007. DPQT1100ZA 130 For North America "Complies with - Panasonic PT-RS30K | Operating Instruction - Page 7
first! WARNING (North America) This projector would become Class IIIb laser product if used with interchangeable lens, types you must receive variance approval letter from FDA before usage. Class IIIb levels of laser radiation are considered to be an acute hazard to the skin and eyes from direct - Panasonic PT-RS30K | Operating Instruction - Page 8
Projector Contact: PT-RZ31K / PT-RS30K Panasonic Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com/support http://panasonic.net/avc/projector and used in accordance with the instruction manual, may cause harmful interference to radio - Panasonic PT-RS30K | Operating Instruction - Page 9
problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector Authorized Service supporting 30 A independently when using the projector with 200 V to 240 V alternating current. Use an outlet supporting 15 A independently when using the projector - Panasonic PT-RS30K | Operating Instruction - Page 10
, adjustment and repair work, please contact an Authorized Service Center. Doing so may cause exposure to dangerous laser radiation. ff The laser module is built in this projector. Follow procedures specified in the Operating Instructions to make operations and adjustments. Do not touch the - Panasonic PT-RS30K | Operating Instruction - Page 11
short-circuits or serious electric shocks will result. When not using the projector for an extended period of time, disconnect the power plug from the may result in electric shock. Do not remove the power connector (projector-side) while current is running. Removing the power connector while current - Panasonic PT-RS30K | Operating Instruction - Page 12
as an estimated duration. Continuous use while dust is accumulated inside the projector may result in fire. ff For cleaning fee, ask your dealer. rr VIEWING 3D VIDEO Those with a medical history of oversensitivity to light, heart problems, or poor physical health should not view 3D images. This may - Panasonic PT-RS30K | Operating Instruction - Page 13
Read this first! To remove the battery Remote Control Battery 1. Press the guide and lift the cover. 2. Remove the batteries. (ii) (i) Brazil Only Brasil Apenas rr Manuseio de baterias usadas BRASIL Após o uso, as pilhas e/ou baterias deverão - Panasonic PT-RS30K | Operating Instruction - Page 14
rrTrademarks ffSOLID SHINE is a trademark of Panasonic Corporation. ffWindows, Internet Explorer, and Microsoft in this manual. rrIllustrations in this manual ffIllustrations of the projector, screen, and other parts may vary from the actual product. ffIllustrations of the projector with the power - Panasonic PT-RS30K | Operating Instruction - Page 15
, and abundant lineup of optional lenses, application to wide range of usage is possible with support of all 360° direction projection utilizing the characteristics of solid-state light source. The projector is equipped with handholds (handles) for transporting and eyebolt attachment is also allowed - Panasonic PT-RS30K | Operating Instruction - Page 16
Chapter 1 Preparation This chapter describes things you need to know or check before using the projector. 16 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 17
lines or near motors: Doing so may interfere with the operation of the projector. ffPlaces where there is high-power laser equipment: Directing a laser beam onto the projection lens surface causes damage to the DLP chips. rrAsk a qualified technician or your dealer to do installation work such as - Panasonic PT-RS30K | Operating Instruction - Page 18
use the screw holes where the adjustable feet were removed to fix the projector to a mount. Also, do not insert any screws other than the insert the removed adjustable feet into other M10 screw holes. ffDo not fix the projector to a mount with the screw holes for eyebolts (4 locations on each side) - Panasonic PT-RS30K | Operating Instruction - Page 19
Adjustable feet Mount Screw holes to fix the projector Tapping depth (common for 6 locations) 30 mm (1-3/16") Adjustable feet Position of screw holes to fix projector and adjustable feet ffDo not stack three or more projectors. ffDo not use the projector supporting it by the top. ffDo not block the - Panasonic PT-RS30K | Operating Instruction - Page 20
- Precautions for use ffPrevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector. 500 mm (19-11/16") or longer 500 mm (19-11/16") or longer When the optional Long Life Filter Unit (Model No.: ET-EMFU330 - Panasonic PT-RS30K | Operating Instruction - Page 21
Chapter 1 Preparation - Precautions for use ffSet the lifting angle to 60° or more. 60° or more 18 mm (23/32") - 30 mm (1-3/16") Security When using this product, take safety measures against the following incidents. ffPersonal information being leaked via this product ffUnauthorized operation of - Panasonic PT-RS30K | Operating Instruction - Page 22
been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. This projector does not support audio transmission because it is not equipped - Panasonic PT-RS30K | Operating Instruction - Page 23
light source of the projector uses lasers, and has the following manual carefully regarding the use of power cords and shielded cables as well. rrViewing 3D images The projector of the projector and external devices vary depends on the 3D system to be used, see the operating instructions of external - Panasonic PT-RS30K | Operating Instruction - Page 24
Chapter 1 Preparation - Precautions for use Accessories Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit (N2QAYB001052) Lens fixing screw (XYN4+J18FJ) Replacement Filter - Panasonic PT-RS30K | Operating Instruction - Page 25
projector projector when using the projector the projector projector at Instruction/list (PDF) Software Operating Instructions Multi Monitoring & Control Software Operating Instructions Logo Transfer Software Operating Instructions List of Compatible Device This is a list of projectors projector - Panasonic PT-RS30K | Operating Instruction - Page 26
Chapter 1 Preparation - Precautions for use Optional accessories Optional accessories (product name) Projection lens Replacement Filter Unit Long Life Filter Unit Smoke Cut Filter Early Warning Software (Basic license/3-year license) Upgrade Kit Auto Screen Adjustment Upgrade Kit Auto Screen - Panasonic PT-RS30K | Operating Instruction - Page 27
>) Switches the input signal to project. (x page 69) The button, the button, and the button are not used with the projector. 13 button Used to temporarily turn off the image. (x page 76) 14 button Displays the test pattern. (x page 78) 15 Lens - Panasonic PT-RS30K | Operating Instruction - Page 28
Chapter 1 Preparation - About your projector ff Avoid contact with liquids or moisture. ff Do not attempt to modify or disassemble the remote control. ff Do not swing the remote control holding onto the strap when a strap is attached. ff Observe the following instructions that are indicated on the - Panasonic PT-RS30K | Operating Instruction - Page 29
supplied power cord. 17 switch Turns on/off the main power. Bottom 2 3 1 2 Projection direction WARNING Do not touch the top surface of the projector during use. ff Doing so may result in burns, as the top surface is hot during use and for a while after use. 1 Screw holes for - Panasonic PT-RS30K | Operating Instruction - Page 30
set to and the power is turned off (standby mode). 2 Power standby button Sets the projector to the state where the projector is turned off (standby mode) when the switch on the projector is set to and in projection mode. 3 button Switches the input to RGB1. 4 - Panasonic PT-RS30K | Operating Instruction - Page 31
a video signal transmission device via the LAN terminal. Attention ff When a LAN cable is directly connected to the projector, the network connection must be made indoors. ff When the [PROJECTOR SETUP] menu → [STANDBY MODE] is set to [NORMAL], power can be supplied by using the terminal - Panasonic PT-RS30K | Operating Instruction - Page 32
screen is displayed" (x page 61). The factory default ID number of the projector (projector body and remote control) is set to [ALL], so you can use it as it is. Set the ID numbers of the projector body and remote control as necessary. For details on setting the ID number - Panasonic PT-RS30K | Operating Instruction - Page 33
with a single remote control, use commercially available M3 stereo mini jack cables to connect to the / terminals of the projectors. The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light - Panasonic PT-RS30K | Operating Instruction - Page 34
Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections. 34 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 35
AC 120 V, and AC 200 V to AC 240 V as the power supply. A grounded outlet supporting 30 A is required when using the projector with AC 200 V to AC 240 V. A grounded outlet supporting 15 A is required when using the projector with AC 100 V to AC 120 V. The shape of the usable outlet differs depending - Panasonic PT-RS30K | Operating Instruction - Page 36
SETUP] menu → [PROJECTION METHOD]. rrAngle sensor The range of the installation attitude that is detected by the angle sensor built-in the projector is as follows. Floor standing installation 30° Ceiling mount installation 30° Floor standing installation Projection direction 36 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 37
size and screen position. When the Fixed-focus Lens (Model No.: ET‑D75LE95) is attached, the projection relation between the screen and the projector differs from that of other lenses. Refer to "Fixed-focus Lens (Model No.: ET‑D75LE95)" (x page 38) for details. ffFollowing illustration is prepared - Panasonic PT-RS30K | Operating Instruction - Page 38
range that can be corrected, refer to "[GEOMETRY] projection range" (x page 39). ff Do not use the projector and the high-powered laser equipment in the same room. The DLP chips can be damaged if a laser beam hits the projection lens surface. ff The dimension of L4 is not the distance between the - Panasonic PT-RS30K | Operating Instruction - Page 39
Chapter 2 Getting Started - Setting up [GEOMETRY] projection range [VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above) Screen Screen Vertical arc correction (viewed from the side) Projection distance Arc radius Screen Horizontal arc correction (viewed from - Panasonic PT-RS30K | Operating Instruction - Page 40
the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen. When using the optional Upgrade Kit (Model correction angle can be corrected in the direction in which the projector body moves away from the screen. Note ff When [ - Panasonic PT-RS30K | Operating Instruction - Page 41
to become smaller than the specified image size. For PT‑RZ31K rrWhen the image aspect ratio is 16:10 (Unit: 1.18 1.56 1.95 2.33 2.72 3.10 3.87 4.64 Fixed-focus Lens ET‑D75LE95*2 0.36:1 Distance between projector and screen (L4) (A1) 0.39 -0.16 0.23 0.61 1.00 1.38 1.77 2.54 3.31 0.17 - Panasonic PT-RS30K | Operating Instruction - Page 42
.710 19.924 22.138 Projection distance (L1) 0.97 1.21 1.60 2.00 2.39 2.79 3.19 3.98 4.77 Fixed-focus Lens ET‑D75LE95*2 0.36:1 Distance between projector and screen (L4) (A1) 0.36 -0.13 0.27 0.67 1.06 1.46 1.85 2.64 3.44 0.18 - 0.43 0.26 - 0.56 0.38 - 0.79 0.51 - 1.02 0.64 - 1.25 0.77 - Panasonic PT-RS30K | Operating Instruction - Page 43
.256 18.288 20.320 Projection distance (L1) 1.07 1.33 1.76 2.20 2.64 3.07 3.51 4.38 5.25 Fixed-focus Lens ET‑D75LE95*2 0.44:1 Distance between projector and screen (L4) (A1) 0.27 0.00 0.43 0.87 1.30 1.74 2.17 3.05 3.92 0.21 - 0.39 0.29 - 0.52 0.43 - 0.74 0.57 - 0.95 0.71 - 1.17 0.85 - Panasonic PT-RS30K | Operating Instruction - Page 44
Chapter 2 Getting Started - Setting up For PT‑RS30K rrWhen the image aspect ratio is 4:3 L1) 0.96 1.20 1.59 1.99 2.38 2.77 3.17 3.95 4.74 Fixed-focus Lens ET‑D75LE95*2 0.39:1 Distance between projector and screen (L4) (A1) 0.37 -0.13 0.26 0.65 1.05 1.44 1.83 2.62 3.41 0.18 - 0.25 0. - Panasonic PT-RS30K | Operating Instruction - Page 45
.710 19.924 22.138 Projection distance (L1) 1.05 1.31 1.73 2.16 2.59 3.02 3.45 4.30 5.16 Fixed-focus Lens ET‑D75LE95*2 0.39:1 Distance between projector and screen (L4) (A1) 0.28 -0.03 0.40 0.83 1.26 1.69 2.11 2.97 3.83 0.20 - 0.53 0.29 - 0.70 0.43 - 0.97 0.56 - 1.25 0.70 - 1.52 0.84 - Panasonic PT-RS30K | Operating Instruction - Page 46
size not listed in this manual, check the projected image size distance. For PT‑RZ31K rrZoom Lens Projection lens Model No x SD + 0.020 = 0.312 x SD + 0.020 = 0.343 x SD + 0.020 Formula for distance between projector and screen (A1) Min. Max. = 0.184 x SH - 0.128 = 0.283 x SH - 0.128 = - Panasonic PT-RS30K | Operating Instruction - Page 47
Chapter 2 Getting Started - Setting up For PT‑RS30K rrZoom Lens Projection lens Model No. ET‑D75LE6 ET‑D75LE10 ET‑D75LE20 ET‑D75LE30 ET‑D75LE40 ET‑D75LE8 Throw ratio 1.0 - 1.2:1 . The adjustable feet can also be used to adjust the projector to be level when it is tilted in the horizontal direction - Panasonic PT-RS30K | Operating Instruction - Page 48
projection lens after turning off the power of the projector. ff Do not touch the electric contacts of the attached to the projection lens. ff Panasonic takes no responsibility for any damage or D75LE95). For details, refer to the Operating Instructions of ET‑D75LE95. Attaching the projection lens - Panasonic PT-RS30K | Operating Instruction - Page 49
does not come out. ff Store the removed lens hole cover in a safe place. ff The lens hood needs to be mounted to the projector when using the projector in combination with the projection lenses below in the North American region. Mount the lens hood after attaching the projection lens. Always ask - Panasonic PT-RS30K | Operating Instruction - Page 50
the supplied lens hole cover. (Fig. 2) ffInsert the lens hole cover by aligning the mark on the lens hole cover (E) with the mark on the projector (E on the left side of LOCK) and turn clockwise until it clicks. 4) Secure the lens hole cover. (Fig. 3) ffUse a Phillips screwdriver to tighten the - Panasonic PT-RS30K | Operating Instruction - Page 51
Before connecting ffBefore connecting, carefully read the operating instructions for the external device to be connected. ffTurn off ggDo not use unnecessarily long cables to connect a device to the projector or to the projector body. The longer the cable, the more susceptible to noise it becomes - Panasonic PT-RS30K | Operating Instruction - Page 52
an HDMI/DVI conversion cable. However, this may not function properly for some external devices, and images may not be displayed. ff The projector does not support VIERA Link (HDMI). ff It is necessary to switch the setting in the [DISPLAY OPTION] menu → [RGB IN] → [RGB1 INPUT SETTING] (x page 118 - Panasonic PT-RS30K | Operating Instruction - Page 53
or may not be displayed. ff The terminal of the projector can be connected to an external device equipped with a DVI‑D terminal using an devices, and images may not be displayed. ff The terminal supports single links only. ff When entering the SYNC ON GREEN signal, do not enter - Panasonic PT-RS30K | Operating Instruction - Page 54
projector or the twisted-pair-cable transmitter. The control itself may not be possible depending on the twisted-pair-cable transmitter. Check the operating instructions LAN communication. Please note that Panasonic does not support the use of the projector outside the maximum transmission distance. - Panasonic PT-RS30K | Operating Instruction - Page 55
, visit the Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices - Panasonic PT-RS30K | Operating Instruction - Page 56
of the contrast synchronization function and the shutter synchronization function, refer to the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] (x page 146). ff The menu items in the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] is the same as the following setting items. gg The [PICTURE] menu - Panasonic PT-RS30K | Operating Instruction - Page 57
Chapter 3 Basic Operations This chapter describes basic operations to start with. ENGLISH - 57 - Panasonic PT-RS30K | Operating Instruction - Page 58
it clicks. (Fig. 2) How to remove the power cord Lock lever Fig. 1 Fig. 2 1) Confirm that the switch on the side of the projector is on the side, and remove the power plug from the outlet. 2) Turn the power cord connector counterclockwise while sliding the lock lever forward - Panasonic PT-RS30K | Operating Instruction - Page 59
power indicator will blink slowly in green while the shutter function is in use (shutter: closed), or while the function of the [PROJECTOR SETUP] menu → [NO SIGNAL LIGHTS-OUT] (x page 142) is operating and the light source is turned off. ff If the power indicator - Panasonic PT-RS30K | Operating Instruction - Page 60
for the indicator status display. ff If the operating environment temperature is low and warm-up takes more than five minutes, the projector will judge that a problem has occurred and the power will automatically be set to standby mode. In such case, increase the operating environment temperature to - Panasonic PT-RS30K | Operating Instruction - Page 61
is switched on for the first time after purchase, as well as when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed, the focus adjustment screen is displayed after projection starts, and then the [INITIAL SETTING] screen is displayed. - Panasonic PT-RS30K | Operating Instruction - Page 62
SETTING OPERATING MODE 2/7 NORMAL MAX LIGHT OUTPUT LEVEL 83.3% LIGHT OUTPUT 83.3% Set the way to use the projector. For details, please refer to the operating instructions "When the initial setting screen is displayed". MENU SELECT ENTER SET CHANGE Note ff The preceding initial setting - Panasonic PT-RS30K | Operating Instruction - Page 63
53.2 ― ― ― Luminance (lm) 30 000 30 000 25 000 16 000 ― ― ― rrTo set the projector based on luminance Luminance (lm) 30 000 25 000 20 000 15 000 10 000 8 000 5 000 [ of use is referred to as the runtime when you use the projector successively. The duration of use is an estimated duration and is - Panasonic PT-RS30K | Operating Instruction - Page 64
keep power consumption low during standby, set this item to [ECO]. After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [STANDBY MODE]. 1) Press qw to switch the setting. INITIAL SETTING 4/7 STANDBY MODE NORMAL When set to ECO, network functions and - Panasonic PT-RS30K | Operating Instruction - Page 65
3 Basic Operations - Switching on/off the projector Initial setting (screen setting) Set the screen cannot be selected or adjusted when [SCREEN FORMAT] is set to the following item. PT‑RZ31K: [16:10] PT‑RS30K: [4:3] 3) Press qw to adjust. INITIAL SETTING 5/7 SCREEN FORMAT 16:9 SCREEN - Panasonic PT-RS30K | Operating Instruction - Page 66
SETTING 7/7 YEAR 20XX MONTH 1 DAY 1 HOUR 12 MINUTE 34 SECOND 56 Please set the date and time of the built-in clock of the projector. MENU SELECT ENTER SET CHANGE 2) Press qw to switch the setting. 3) Press the button. ffConfirm the setting value and complete the initial - Panasonic PT-RS30K | Operating Instruction - Page 67
(, , , , , , ) to select the input signal. 4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 47) 5) Press the button to adjust the position of the projected image. 6) If the input signal is the - Panasonic PT-RS30K | Operating Instruction - Page 68
in red (fan is stopped). 4) Press the side of the switch to turn off the power. Attention ff When switching off the projector, make sure to follow the procedures described. Failure to do so may damage the internal components and result in malfunctions. Note ff For approximately 15 - Panasonic PT-RS30K | Operating Instruction - Page 69
menu → [ASPECT]. Note ff When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on the twisted-pair- - Panasonic PT-RS30K | Operating Instruction - Page 70
while in the P IN P. (x page 158) ff If the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector, the input selection menu for the DIGITAL LINK output supported device is displayed when the button is pressed while the DIGITAL LINK - Panasonic PT-RS30K | Operating Instruction - Page 71
Fixed-focus Lens (Model No.: ET‑D75LE50) is used, do not use the shift adjustment, and use the projector with the lens position at the home position. (x page 72) ff The adjustment can be performed faster by scale shown on the periphery focus adjustment ring are an approximate guide. ENGLISH - 71 - Panasonic PT-RS30K | Operating Instruction - Page 72
of the lens is used when the lens is being replaced or when the projector is being stored, and it is not the optical center of the screen. image in the ET‑D75LE95 lens standard position (reference projection position). rrPT‑RZ31K ET‑D75LE8, ET‑D75LE10, ET‑D75LE20, ET‑D75LE30, ET‑D75LE40 Projected - Panasonic PT-RS30K | Operating Instruction - Page 73
screws locks the lens mount bracket in place so it does not move. When a projection lens with a large weight is installed, or when the projector is installed on an inclination, the lens may tilt and the focus may become unbalanced. In these cases, perform adjustment by referring to the relationship - Panasonic PT-RS30K | Operating Instruction - Page 74
Chapter 3 Basic Operations - Projecting rrFront view diagram of the lens mounter (viewed from the screen side) Lens mount bracket (a) Fixing screws (b) (c) Note ff Focus adjustment screws (a), (b), and (c) are adjusted with the lens attached. Adjustment procedure rrRelationship between the - Panasonic PT-RS30K | Operating Instruction - Page 75
Chapter 3 Basic Operations - Projecting 5) Slowly turn the focus adjustment screws corresponding to the locations counterclockwise and stop where the image is in focus. (x page 73) ffIf the screws are turned counterclockwise, the tilt of the lens will change by moving the lens mount bracket of the - Panasonic PT-RS30K | Operating Instruction - Page 76
Chapter 3 Basic Operations - Operating with the remote control Operating with the remote control Using the shutter function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image temporarily. button 1) Press - Panasonic PT-RS30K | Operating Instruction - Page 77
the button. ff[COMPLETE] is displayed when it has completed without any problem. ffThis operation can be also performed using the button on the control ff Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 150). ENGLISH - 77 - Panasonic PT-RS30K | Operating Instruction - Page 78
. ffThe [STATUS] screen is displayed. STATUS PROJECTOR TYPE PROJECTOR RUNTIME LIGHT RUNTIME MAIN/SUB VERSION INTAKE AIR TEMP. OPTICS MODULE TEMP. EXHAUST AIR TEMP. LIGHT1-B TEMP. LIGHT1-S TEMP. LIGHT2-B TEMP. LIGHT2-S TEMP. SELF TEST 1/6 RZ31K(123456789012) 100000h 100000h / 100000h 1.00 / 1.00 - Panasonic PT-RS30K | Operating Instruction - Page 79
Using the AC voltage monitor function The value of input supply voltage can be displayed on the self-diagnosis display at the side of the projector. rrTo display during projection 1) Press the power on button. ffThe value of the input supply voltage is displayed only as numeric value on the self - Panasonic PT-RS30K | Operating Instruction - Page 80
Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu. 80 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 81
from the main menu. ffThe selected item is highlighted in yellow. MAIN MENU PICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE 3D SETTINGS DISPLAY OPTION PROJECTOR SETUP P IN P TEST PATTERN SIGNAL LIST SECURITY NETWORK MENU SELECT ENTER SUB MENU 3) Press the button. ffThe sub-menu items of the - Panasonic PT-RS30K | Operating Instruction - Page 82
factory default at a time. ff To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR SETUP] menu → [INITIALIZE]. ff Some items cannot be reset to the factory default settings even when the button on the remote control is pressed - Panasonic PT-RS30K | Operating Instruction - Page 83
Chapter 4 Settings - Menu navigation Main menu item [DISPLAY LANGUAGE] Page 107 [3D SETTINGS] 108 [DISPLAY OPTION] 113 [PROJECTOR SETUP] 134 [P IN P] 158 [TEST PATTERN] 160 [SIGNAL LIST] 161 [SECURITY] 164 [NETWORK] 168 Sub-menu The sub-menu of the selected main menu item - Panasonic PT-RS30K | Operating Instruction - Page 84
Chapter 4 Settings - Menu navigation Sub-menu item [BLANKING] [INPUT RESOLUTION] [CLAMP POSITION] [EDGE BLENDING] [FRAME RESPONSE] [FRAME CREATION] [FRAME LOCK] [RASTER POSITION] *1 Depends on the signal input. Factory default ― ― [24]*1 [OFF] [NORMAL] ― ― ― Page 101 102 102 103 104 105 106 106 - Panasonic PT-RS30K | Operating Instruction - Page 85
[PROJECTION METHOD] [OPERATION SETTING] [LIGHT OUTPUT] [BRIGHTNESS CONTROL] [STANDBY MODE] [NO SIGNAL SHUT-OFF] [NO SIGNAL LIGHTS-OUT] [INITIAL STARTUP] [STARTUP INPUT SELECT] [DATE AND TIME] [SCHEDULE] [MULTI PROJECTOR SYNC] [RS-232C] [REMOTE2 MODE] [FUNCTION BUTTON] [LENS CALIBRATION] [LENS MEMORY - Panasonic PT-RS30K | Operating Instruction - Page 86
169 170 170 170 171 171 Note ff Some items may not be adjusted or used for certain signal formats to be input to the projector. When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or - Panasonic PT-RS30K | Operating Instruction - Page 87
is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images. ff Press the button when each - Panasonic PT-RS30K | Operating Instruction - Page 88
Chapter 4 Settings - [PICTURE] menu Attention ff Adjust [BRIGHTNESS] first when you need to adjust the black level. [BRIGHTNESS] You can adjust the dark (black) part of the projected image. 1) Press as to select [BRIGHTNESS]. 2) Press qw or the button. ffThe [BRIGHTNESS] individual - Panasonic PT-RS30K | Operating Instruction - Page 89
Chapter 4 Settings - [PICTURE] menu [USER1] [USER2] [3200K] - [9300K] Adjusts white balance as desired. Refer to "Adjusting desired white balance" (x page 89) for details. Allows you to set in increments of 100 K. Select so that images become natural. Note ff When [PICTURE MODE] (x page 87) is - Panasonic PT-RS30K | Operating Instruction - Page 90
HDR ST2084‑1000] [HDR HLG] [DICOM SIM.] Gamma mode unique to this projector. Uses the gamma data registered by the user. (Registration requires separate software. ST 2084 that assumes a highest luminance of 500 nt and supports HDR (High Dynamic Range). Gamma mode compliant with SMPTE ST 2084 - Panasonic PT-RS30K | Operating Instruction - Page 91
DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images. Changing the name of [USER1] or - Panasonic PT-RS30K | Operating Instruction - Page 92
to select the item to set. ffThe items of the detailed settings will switch each time you press qw. ffPress the button when [MULTI PROJECTOR SYNC] is selected. 92 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 93
MANUAL INTENSITY] (Manual light source adjustment) [DYNAMIC GAMMA] (Adjustment of signal compensation) [0%] - [5%] [0] - [255] [OFF] [1] [2] [3] [MULTI PROJECTOR gg When on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed gg When the - Panasonic PT-RS30K | Operating Instruction - Page 94
of the digital cinema color region defined by the Digital Cinema Initiatives (DCI). [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal. 1) Press as - Panasonic PT-RS30K | Operating Instruction - Page 95
Chapter 4 Settings - [PICTURE] menu 6) Press the button on the remote control to set the factory default setting. 7) Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT VIEW] to the factory default settings. Note ff sRGB is available for RGB signal input - Panasonic PT-RS30K | Operating Instruction - Page 96
shift, aspect, and clock phase from the menu of DIGITAL LINK output supported device at first. [SHIFT] Move the image position vertically or horizontally if on the screen is still out of position even when the positions of the projector and screen are correct. 1) Press as to select [SHIFT]. 2) Press - Panasonic PT-RS30K | Operating Instruction - Page 97
signals is selected, the images will appear differently from the originals. Be careful of this when selecting the aspect ratio. ff If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that adjusting the aspect ratio or - Panasonic PT-RS30K | Operating Instruction - Page 98
Chapter 4 Settings - [POSITION] menu Note ff When [ASPECT] is set to [THROUGH], [ZOOM] cannot be adjusted. When [ASPECT] is set to [DEFAULT] 1) Press as to select [ZOOM]. 2) Press the button. ffThe [ZOOM] screen is displayed. 3) Press as to select [MODE]. 4) Press qw to switch the item. [ - Panasonic PT-RS30K | Operating Instruction - Page 99
Chapter 4 Settings - [POSITION] menu [OFF] [KEYSTONE] [CORNER CORRECTION] [CURVED CORRECTION] [PC-1]*1 [PC-2]*1 [PC-3]*1 Does not perform geometric adjustment. Adjusts any trapezoidal distortion in the projected image. Adjusts any distortion in the four corners of the projected image. Adjusts any - Panasonic PT-RS30K | Operating Instruction - Page 100
[VERTICAL ARC] Chapter 4 Settings - [POSITION] menu [CURVED CORRECTION] [HORIZONTAL ARC] [VERTICAL BALANCE] [HORIZONTAL BALANCE] [MAINTAIN ASPECT RATIO] Select [ON] to correct while keeping the aspect ratio. Setting [CORNER CORRECTION] 1) Press as to select [GEOMETRY]. 2) Press qw to select [ - Panasonic PT-RS30K | Operating Instruction - Page 101
w. Press q. Adjustment The blanking zone moves upward. The blanking zone moves downward. The blanking zone moves upward. The blanking zone moves downward. Range of adjustment PT‑RZ31K: Top and bottom 0 - 1 198 PT‑RS30K: Top and bottom 0 - 1 048 ENGLISH - 101 - Panasonic PT-RS30K | Operating Instruction - Page 102
right. The blanking zone moves to the left. Range of adjustment PT‑RZ31K: Left and right 0 - 1 918 PT‑RS30K: Left and right 0 - 1 398 Note ff The . Status The black part is blunt. The black part is green. Rough guide for optimal value The point where bluntness of the black part improves the most - Panasonic PT-RS30K | Operating Instruction - Page 103
each time you press the button. [OFF] [ON] [USER] Sets the edge blending function to off. Use the setting value preset in the projector for the inclination of the edge blending area. Use the user-setting value for the inclination of the edge blending area. (Configuration/registration requires - Panasonic PT-RS30K | Operating Instruction - Page 104
Chapter 4 Settings - [ADVANCED MENU] menu 14) Press as to select an item, and press qw to adjust the setting. ffOnce the adjustment is completed, press the button to return to the [BRIGHTNESS ADJUST] screen. 15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH]. - Panasonic PT-RS30K | Operating Instruction - Page 105
Chapter 4 Settings - [ADVANCED MENU] menu 2) Press qw to switch the item. ffThe items will switch each time you press the button. [NORMAL] [FAST]*1 [FIXED]*2 Standard setting. Simplifies the image processing to reduce image frame delay. Sets image frame delay to be constant regardless of the - Panasonic PT-RS30K | Operating Instruction - Page 106
Chapter 4 Settings - [ADVANCED MENU] menu [OFF] [ON] Disables the film detection function. Enables the film detection function. The video resolution is enhanced for the contents that telecine is performed on the input signal. Note ff The video resolution is not changed even if [FILM DETECTION] is - Panasonic PT-RS30K | Operating Instruction - Page 107
, Chinese, Russian, or Korean. Note ff The on-screen display language is set to English in the factory default setting as well as when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed. ENGLISH - 107 - Panasonic PT-RS30K | Operating Instruction - Page 108
to be connected are turned off. ff Changing the [3D SYNC MODE] setting while the cables are connected may result in malfunctions of the projector or the connected external devices. 1) Press as to select [3D SYNC SETTING]. 2) Press the button. ffThe precaution message related to [3D SYNC - Panasonic PT-RS30K | Operating Instruction - Page 109
is selected. Note ff [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic (production discontinued) is used with the projector. Consult your dealer regarding the connection method. ff The following settings are disabled and the contrast synchronization function and - Panasonic PT-RS30K | Operating Instruction - Page 110
Chapter 4 Settings - [3D SETTINGS] menu [3D COLOR MATCHING] Switch the color matching correction data applied to displayed image. 1) Press as to select [3D COLOR MATCHING]. 2) Press qw to switch the item. ffThe items will switch each time you press the button. [SHARED 2D/3D] [SEPARATE 2D/3D] - Panasonic PT-RS30K | Operating Instruction - Page 111
the image of the right eye input signal for the right eye image. Note ff The [3D TEST MODE] setting returns to [NORMAL] when the projector is switched off. ff This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE]. ff This function is disabled when - Panasonic PT-RS30K | Operating Instruction - Page 112
to show or hide the safety precautions message related to 3D viewing when the projector is switched on. 1) Press as to select [SAFETY PRECAUTIONS MESSAGE]. 2) 3D images safely and comfortably, please refer to the Operating Instructions for in-depth description. 3D SAFETY PRECAUTIONS 2/2 Please - Panasonic PT-RS30K | Operating Instruction - Page 113
. ff Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projector or by a service person. ff Pressing the button on the remote control will restore the factory default settings for all items. ff When [COLOR - Panasonic PT-RS30K | Operating Instruction - Page 114
displayed properly when target data is a color outside the region of this projector. ff Set the [AUTO TESTPATTERN] to [ON] to automatically display a item. ffThe items will switch each time you press the button. Model No. PT‑RZ31K PT‑RS30K [SCREEN FORMAT] [16:10] [4:3] [16:9] [4:3] [16:9] Range - Panasonic PT-RS30K | Operating Instruction - Page 115
as to select [SCREEN POSITION]. ff[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the following item. PT‑RZ31K: [16:10] PT‑RS30K: [4:3] 5) Press qw to adjust [SCREEN POSITION]. [AUTO SIGNAL] Set whether to execute automatic setup of signals automatically. The screen - Panasonic PT-RS30K | Operating Instruction - Page 116
Chapter 4 Settings - [DISPLAY OPTION] menu 2) Press the button. ffThe [AUTO SETUP] screen is displayed. 3) Press as to select [POSITION ADJUST]. 4) Press qw to switch the item. [ON] [OFF] Adjust the screen position and size when automatic setup is executed. Does not perform automatic - Panasonic PT-RS30K | Operating Instruction - Page 117
that input is displayed in [PRIMARY INPUT] and [SECONDARY INPUT] of the [BACKUP INPUT SETTING] screen. ff [BACKUP INPUT STATUS] is displayed in the input guide (x page 127) and the [STATUS] screen (x pages 78, 152) when [BACKUP INPUT MODE] is set to anything other than [OFF]. When the signal can be - Panasonic PT-RS30K | Operating Instruction - Page 118
Chapter 4 Settings - [DISPLAY OPTION] menu [AUTO(2D)]*1 Displays 2D image of the simultaneous format. *1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2]. Note ff If [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to - Panasonic PT-RS30K | Operating Instruction - Page 119
scanning frequency settings may also be required on your computer or video device. ff After configuring settings, your computer or video device or the projector may be required to be turned off and on. ff A signal may not be output with the resolution and vertical scanning frequency that have - Panasonic PT-RS30K | Operating Instruction - Page 120
output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. Refer to "List of compatible signals" (x page 225) for a resolution that supports plug and play. Setting [EDID MODE] in [DVI-D IN] 1) Press as to - Panasonic PT-RS30K | Operating Instruction - Page 121
. ff After configuring settings, your computer or video device or the projector may be required to be turned off and on. ff A signal the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. ff The - Panasonic PT-RS30K | Operating Instruction - Page 122
device. ff After configuring settings, your computer or video device or the projector may be required to be turned off and on. ff A signal may output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device. ff - Panasonic PT-RS30K | Operating Instruction - Page 123
scanning frequency settings may also be required on your computer or video device. ff After configuring settings, your computer or video device or the projector may be required to be turned off and on. ff A signal may not be output with the resolution and vertical scanning frequency that have - Panasonic PT-RS30K | Operating Instruction - Page 124
Chapter 4 Settings - [DISPLAY OPTION] menu 6) Press the button. Note ff The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals. ff When the [SIMUL INPUT SETTING] is set to anything other than [OFF], [SDI - Panasonic PT-RS30K | Operating Instruction - Page 125
Chapter 4 Settings - [DISPLAY OPTION] menu Setting [SYSTEM SELECTOR] in [SDI IN] 1) Press as to select [SDI IN]. 2) Press the button. ffThe [SDI IN] screen is displayed. 3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the button. ffThe [SINGLE LINK - Panasonic PT-RS30K | Operating Instruction - Page 126
Chapter 4 Settings - [DISPLAY OPTION] menu 4) Press as to select [SDI1] or [SDI2], and press the button. ffThe [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed. 5) Press as to select [SIGNAL LEVEL]. 6) Press qw to switch the item. ffThe items will switch - Panasonic PT-RS30K | Operating Instruction - Page 127
4) Press qw to switch the item. ffThe items will switch each time you press the button. [ON] [OFF] Displays the input guide. Hides the input guide. Setting [WARNING MESSAGE] Set the display/hide of the warning message. 1) Press as to select [ON-SCREEN DISPLAY]. 2) Press the button. ffThe - Panasonic PT-RS30K | Operating Instruction - Page 128
] or [CLEAN THE AIR FILTER] is detected while using the projector. Also, the following countdown message is not displayed: the message you press the button. [DEFAULT LOGO] [USER LOGO] [NONE] Displays the Panasonic logo. Displays the image registered by the user. Disables the startup logo display. - Panasonic PT-RS30K | Operating Instruction - Page 129
control correction. Consult your dealer. Note ff The setting value for [UNIFORMITY] will not return to factory default even if the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed. [SHUTTER SETTING] The operation of the shutter function is set. Setting [MECHANICAL SHUTTER - Panasonic PT-RS30K | Operating Instruction - Page 130
By closing the mechanical shutter, the malfunction of the DLP chip caused by high power laser ray entering the projection lens surface can be prevented. . The projector goes into projection mode with the shutter function enabled (shutter: closed) when the power is turned on. Setting [SHUT-OFF] - Panasonic PT-RS30K | Operating Instruction - Page 131
this item when the contrast synchronization function or the shutter synchronization function is used. Set this item in all the linked projectors excluding the projector set as the [MASTER]. ffWhen anything other than [OFF] is selected, the diagnostic result is displayed in [LINK STATUS], indicating - Panasonic PT-RS30K | Operating Instruction - Page 132
from a connected external device to display in a waveform. Check whether video output (luminance) signal level is within the recommended range for the projector and adjust. 1) Press as to select [WAVEFORM MONITOR]. 2) Press qw to switch the item. [OFF] [ON] Does not display the waveform monitor - Panasonic PT-RS30K | Operating Instruction - Page 133
Chapter 4 Settings - [DISPLAY OPTION] menu Adjusting the waveform Project the luminance adjustment signal of a commercial test disk (0 % (0 IRE or 7.5 IRE) - 100 % (100 IRE)) and adjust. Signal level Image displayable area Image position 1) Select "Select line (luminance)" on the waveform - Panasonic PT-RS30K | Operating Instruction - Page 134
Press qw to switch the item. ffThe items will switch each time you press the button. [FRONT] [REAR] Select this item when installing the projector in front of the screen. Select this item when installing behind the screen (using translucent screen). Setting [FLOOR/CEILING] 1) Press as to select - Panasonic PT-RS30K | Operating Instruction - Page 135
→ [INITIALIZE] → [ALL USER DATA] is executed. ff Set [OPERATING MODE] to anything other than [LONG LIFE1], [LONG LIFE2], or [LONG LIFE3] when using the projector at an altitude of 2 700 m (8 858') or higher above sea level. ff [OPERATING MODE] cannot be set to [LONG LIFE1], [LONG LIFE2], or [LONG - Panasonic PT-RS30K | Operating Instruction - Page 136
], or [LONG LIFE3], the item of [MAX LIGHT OUTPUT LEVEL] cannot be adjusted. ff The brightness is corrected using this setting when the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS CONTROL SETUP] → [CONSTANT MODE] is set to [AUTO] or [PC]. ff The [MAX LIGHT OUTPUT LEVEL] setting does - Panasonic PT-RS30K | Operating Instruction - Page 137
Values of the luminance and runtime are rough estimations. rrTo set the projector based on the duration of use Duration of use (hour) 5 000 83.3 26.6 7 900 83.3 20.2 6 000 83.3 13.2 3 900 rrTo set the projector based on luminance Luminance (lm) 30 000 25 000 20 000 15 000 10 000 8 000 - Panasonic PT-RS30K | Operating Instruction - Page 138
the constant brightness is kept will become longer by setting the value of [LIGHT OUTPUT] smaller. Performs correction by the brightness sensor in multiple projectors in synchronization. Up to four groups (A to D) can be set within the same subnet by using the network function. You can register and - Panasonic PT-RS30K | Operating Instruction - Page 139
in brightness has increased due to aging of the light source, or when you replaced the light source, readjust the brightness control. ff When the projector is used continuously for more than 24 hours, set the [CALIBRATION TIME] in [BRIGHTNESS CONTROL SETUP]. If it is not set, correction will not be - Panasonic PT-RS30K | Operating Instruction - Page 140
When [CONSTANT MODE] is set to [OFF] The screen shows the status that the brightness control is disabled. BRIGHTNESS CONTROL STATUS CONSTANT MODE OFF PROJECTOR 1 MENU RETURN When [CONSTANT MODE] is set to [AUTO], and [LINK] is set to [OFF] The screen shows the status of the brightness control - Panasonic PT-RS30K | Operating Instruction - Page 141
for [User name] and [Password] as the web control administrator rights to all linked projectors. ff The projector is in standby. Switch on the power. ff There is a problem with the brightness sensor. If problems persist even after switching on the power, consult your dealer. *1 "Multi Monitoring - Panasonic PT-RS30K | Operating Instruction - Page 142
MODE] setting does not return to factory default setting even if the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed. [NO SIGNAL SHUT-OFF] A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of - Panasonic PT-RS30K | Operating Instruction - Page 143
on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed Panasonic twisted-pair-cable transmitter to the specified input. *1 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector - Panasonic PT-RS30K | Operating Instruction - Page 144
Chapter 4 Settings - [PROJECTOR SETUP] menu Setting the date and time manually 1) Press as to select [DATE AND TIME for how to set the schedule. Note ff When [SCHEDULE] is set to [ON] while the [PROJECTOR SETUP] menu → [STANDBY MODE] is set to [ECO], the [STANDBY MODE] setting is forcibly switched - Panasonic PT-RS30K | Operating Instruction - Page 145
change the page using qw. 6) Press asqw to select [TIME], and press the button. ffThe projector is in the adjustment mode (the time is blinking). 7) Press qw to select "hour" or "minute switches the input of the Panasonic twisted-pair-cable transmitter to the specified input. ENGLISH - 145 - Panasonic PT-RS30K | Operating Instruction - Page 146
of [USER2]. Lays out the sub-screen with the settings of [USER3]. *1 When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the projector, its input name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the - Panasonic PT-RS30K | Operating Instruction - Page 147
this item when the contrast synchronization function or the shutter synchronization function is used. Set this item only on one projector out of the projectors that are linked. The projector set as the [MASTER] will calculate the brightness level of the video signal to become optimum on the whole - Panasonic PT-RS30K | Operating Instruction - Page 148
] [DIGITAL LINK] Performs the RS‑232C communication with the terminal of the projector. Performs the RS‑232C communication via the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) and the terminal. 5) Press as to select [(IN) BAUDRATE - Panasonic PT-RS30K | Operating Instruction - Page 149
item. [A] - [Z] Controls multiple projectors simultaneously by sending the ID of RS‑232C. You can set groups from [A] to [Z]. The projector responds when the ID of RS‑ device (such as the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G)) is connected to - Panasonic PT-RS30K | Operating Instruction - Page 150
Chapter 4 Settings - [PROJECTOR SETUP] menu ff When transferring logos via the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G), setting for "NO SIGNAL SLEEP" of the DIGITAL LINK output supported device should be set to "OFF" to avoid interruption of communication. - Panasonic PT-RS30K | Operating Instruction - Page 151
Chapter 4 Settings - [PROJECTOR SETUP] menu [D75LE95] Select this item when the Fixed-focus Lens (Model No.: ET‑D75LE95) is used. Move the lens to the ET‑D75LE95 lens - Panasonic PT-RS30K | Operating Instruction - Page 152
Chapter 4 Settings - [PROJECTOR SETUP] menu Note ff Lens memory is not guaranteed to be 100 % reproduced. ff The zoom and focus any characters and press the button, the default name will be used. [STATUS] Display the status of the projector. 1) Press as to select [STATUS]. 152 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 153
RUNTIME]*4 time used with the [NORMAL] setting. The converted runtime is used for a rough indication about when to perform maintenance when the projector is used in combination of each item in [OPERATING MODE]. [UPGRADE KIT] [ET-UK20] [ET-CUK10] Displays the activation status by the - Panasonic PT-RS30K | Operating Instruction - Page 154
Enable or disable the AC voltage monitor function. The value of input supply voltage is displayed on the selfdiagnosis display at the side of the projector when enabled. 1) Press as to select [AC VOLTAGE MONITOR]. 2) Press qw to switch the item. ffThe items will switch each time you press the button - Panasonic PT-RS30K | Operating Instruction - Page 155
to replace the filter is not set. Select this item when the optional Smoke Cut Filter (Model No.: ET‑SFR330) is attached to the projector. When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set to [HIGH], the recommend time to replace the filter is set to 50 hours. When the - Panasonic PT-RS30K | Operating Instruction - Page 156
computer application is not included in [ALL USER DATA]. ff The data saved by executing [SAVE ALL USER DATA] is not deleted even if the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed. [LOAD ALL USER DATA] Load the various setting values saved as a backup in the built-in memory - Panasonic PT-RS30K | Operating Instruction - Page 157
] → [OPERATING MODE] gg The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [MAX LIGHT OUTPUT LEVEL] gg The [PROJECTOR SETUP] menu → [STANDBY MODE] gg [FILTER TYPE] and [FILTER COUNTER] in the [PROJECTOR SETUP] menu → [FILTER SETTING] gg Security password [SERVICE PASSWORD] This function is used by - Panasonic PT-RS30K | Operating Instruction - Page 158
Chapter 4 Settings - [P IN P] menu [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 81) for the operation of the menu screen. Using P IN P function Locate a separate, small sub screen in the - Panasonic PT-RS30K | Operating Instruction - Page 159
Chapter 4 Settings - [P IN P] menu 16) Press qw to switch the item. [MAIN WINDOW] [SUB WINDOW] The main window has display priority. The sub window has display priority. Note ff The P IN P function may not be available for some signals being input or terminals being selected. Refer to "Two- - Panasonic PT-RS30K | Operating Instruction - Page 160
to "Navigating through the menu" (x page 81) for the operation of the menu screen. [TEST PATTERN] Display the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various - Panasonic PT-RS30K | Operating Instruction - Page 161
: 720/60p-A1 RGB2 A2: XXXXXX XXXX A3: XGA75-A3 RGB2 Note ff Up to 96 signals, including sub memories, can be registered to the projector. ff There are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and the signal is registered to - Panasonic PT-RS30K | Operating Instruction - Page 162
Chapter 4 Settings - [SIGNAL LIST] menu ffTo cancel the deletion, press the button to return to the [REGISTERED SIGNAL LIST] screen. 3) Press the button. ffThe selected signal will be deleted. Note ff A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [ - Panasonic PT-RS30K | Operating Instruction - Page 163
types of signals are input to the same terminal, signals are sometimes not determined correctly when the setting is set to [WIDE]. Sub memory The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or - Panasonic PT-RS30K | Operating Instruction - Page 164
, and select an item from the sub-menu. Refer to "Navigating through the menu" (x page 81) for the operation of the menu screen. ffWhen the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. Attention ff When you select the [SECURITY] menu - Panasonic PT-RS30K | Operating Instruction - Page 165
Chapter 4 Settings - [SECURITY] menu 2) Press qw to switch the item. ffThe items will switch each time you press the button. [OFF] [TEXT] [USER LOGO] Hides the security message. Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. Displays the image registered by the user. Note ff To - Panasonic PT-RS30K | Operating Instruction - Page 166
there is no operation for approx. 10 seconds. ff If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot enter standby). ff When the setting has completed, the menu screen will disappear. To operate continuously, press the - Panasonic PT-RS30K | Operating Instruction - Page 167
Chapter 4 Settings - [SECURITY] menu 3) Press asqw to select the text, and press the button to enter the text. 4) Press asqw to select [OK], and press the button. ffTo cancel, select [CANCEL]. Attention ff The initial password is "AAAA" by the factory default or when [ALL USER DATA] - Panasonic PT-RS30K | Operating Instruction - Page 168
MODE] Switch the communication method of the terminal of the projector. 1) Press as to select [DIGITAL LINK MODE]. 2) Press qw to switch the be made correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGITAL LINK MODE] is - Panasonic PT-RS30K | Operating Instruction - Page 169
to the operation instructions of the menu. [PROJECTOR NAME] [DHCP] [IP ADDRESS] [SUBNET MASK] [DEFAULT GATEWAY] Allows to change the projector name. Enter the be set to [OFF] when connecting the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G). For details of - Panasonic PT-RS30K | Operating Instruction - Page 170
Instructions of the DIGITAL LINK output supported device for details. Note ff [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON]. ff The operation guidance for the "RETURN" button is in the menu screen of the Digital Interface Box and DIGITAL LINK Switcher. The projector MANUAL)] - Panasonic PT-RS30K | Operating Instruction - Page 171
) is required. Freezes the projected image. Adjusts the color saturation. Adjusts the tint. Displays the raster pattern. Enables/disables the control of the projector with the Art-Net function. No definition ffThe setting can be also made by pressing as to select the channel, pressing the - Panasonic PT-RS30K | Operating Instruction - Page 172
Chapter 5 Operations This chapter describes how to use each function. 172 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 173
within the intranet, and to notify the problem or to detect the sign of possible problem of the device, can be used. Visit the Panasonic website (http://panasonic.net/avc/projector/pass/) for details. ffPJLink Operation or status query of the projector can be performed from a computer using the - Panasonic PT-RS30K | Operating Instruction - Page 174
made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. Setting the projector 1) Connect the projector to a computer using a LAN cable - Panasonic PT-RS30K | Operating Instruction - Page 175
.0.8 255.255.255.0 192.168.0.1 None Operating the computer 1) Turn on the power of the computer. 2) Perform the network setting following the instruction of your network administrator. ffOperation from the computer is possible by configuring the network setting of the computer as follows if the - Panasonic PT-RS30K | Operating Instruction - Page 176
projector ffDisplay of the projector status ffSending E-mail messages when there is a problem with the projector The projector supports Start up the web browser on the computer. 2) Enter the IP address set on the projector into the URL entry field of the web browser. 3) Enter the user name and the - Panasonic PT-RS30K | Operating Instruction - Page 177
incorrect password is entered three times consecutively. ff Some items on the projector setting page use the Javascript function of the web browser. Correct control The size or the display of the screen may be different from this manual depending on the OS or the web browser, or the type of computer - Panasonic PT-RS30K | Operating Instruction - Page 178
MODE]. 6 [MAX LIGHT OUTPUT LEVEL] Displays the setting status of [MAX LIGHT OUTPUT LEVEL]. 7 [SERIAL NUMBER] Displays the serial number of the projector. 8 [REMOTE2 STATUS] Displays the control status of the terminal. 9 [OSD] Displays the status of on-screen display function. ([ON - Panasonic PT-RS30K | Operating Instruction - Page 179
[Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status] screen, click it to display the content of the error/warning. ffThe projector may go into the standby status to protect the projector depending on the contents of the error. 1 2 1 Display of error information - Panasonic PT-RS30K | Operating Instruction - Page 180
on-screen display function. ([OFF]: Hide; [ON]: Display) 4 [SYSTEM] Switches the system method. 5 On-screen display of the projector Displays the same items as shown on the on-screen display of the projector. You can check or change the settings of the menus. It is displayed even if the on-screen - Panasonic PT-RS30K | Operating Instruction - Page 181
of the control page. The display of the test pattern disappears if [Exit] is clicked. 11 [GET OSD] Updates the on-screen display of the projector at the right of the control page. 1 2 3 4 5 6 7 1 [HOME POSITION] Moves the lens position to the home position or the ET‑D75LE95 lens standard position - Panasonic PT-RS30K | Operating Instruction - Page 182
ffClick the [Next] button to display the current settings. ffClick the [Change] button to display the setting change screen. 1 2 3 4 5 6 7 8 1 [PROJECTOR NAME] Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc. 2 [DHCP ON], [DHCP OFF] To enable the - Panasonic PT-RS30K | Operating Instruction - Page 183
server name of the NTP server when you set to adjust the date and time manually. (To enter the server name, the DNS server needs to be set up and time settings. Note ff The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the - Panasonic PT-RS30K | Operating Instruction - Page 184
page Send an E-mail to preset E-mail addresses (up to two addresses) when a problem has occurred. Click [Detailed set up] → [E-mail set up]. 1 2 3 address of the projector. (Up to 63 characters in single byte) 4 [MEMO] Enter information such as the location of the projector that notifies the sender - Panasonic PT-RS30K | Operating Instruction - Page 185
to send an E-mail. Click [Detailed set up] → [Authentication set up]. 1 2 3 4 5 6 7 8 1 [Auth] Select the authentication method specified by your Internet service provider. 2 [SMTP Auth] Set when the SMTP authentication is selected. 3 [POP server name] Enter the POP server name. Allowed characters - Panasonic PT-RS30K | Operating Instruction - Page 186
sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : RZ31K Serial No : 123456789012 ----- E-mail setup data ----- TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval - Panasonic PT-RS30K | Operating Instruction - Page 187
control function Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : RZ31K Serial No : 123456789012 ----- ERROR INFORMATION ----U21 Intake air temp. error Error code 00 00 00 00 00 00 00 - Panasonic PT-RS30K | Operating Instruction - Page 188
Chapter 5 Operations - Web control function [Change password] page Click [Change password]. 1 2 3 1 [Administrator] Used to change the setting of the [Administrator]. 2 [User] Used to change the setting of the [User]. [Administrator] account 1 [Account] Displays the account to change. 2 [Current] [ - Panasonic PT-RS30K | Operating Instruction - Page 189
[Password] in [Current] is required. [Crestron Connected(TM)] page The projector can be monitored/controlled with Crestron ConnectedTM. It is necessary to access with on your computer, or the browser you use does not support Flash. In such a case, click [Back] in the operation page to go back - Panasonic PT-RS30K | Operating Instruction - Page 190
disabled) [Tools] page Click [Tools] in the operation page. 6 7 4 [Input Select] Controls input selection. Not available when the power of the projector is turned off. 5 Menu screen control buttons Navigates the menu screen. 6 Freeze/image quality adjustment Controls items related to freeze/image - Panasonic PT-RS30K | Operating Instruction - Page 191
Chapter 5 Operations - Web control function [Info] page Click [Info] in the operation page. 1 4 5 2 3 6 7 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp1 Hours], [Lamp2 Hours] Displays the runtime of the light source 1 and the light source 2. - Panasonic PT-RS30K | Operating Instruction - Page 192
Chapter 6 Maintenance This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units. 192 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 193
6 Maintenance - Light source/temperature/filter indicators Light source/temperature/filter indicators When an indicator lights up If a problem occurs inside the projector, the light source indicators /, temperature indicator , or filter indicator will inform you by - Panasonic PT-RS30K | Operating Instruction - Page 194
time to replace the filter. ff The temperature around or outside the projector is abnormally high. ff The air filter unit is not attached. ff objects if they are blocking the air intake/exhaust port. ff Do not use the projector at an altitude of 4 200 m (13 780')*2 or higher above sea level. - Panasonic PT-RS30K | Operating Instruction - Page 195
The filter is clogged. ff The runtime of the filter exceeds the recommended time to replace the filter. ff The temperature around or outside the projector is abnormally high. ff Replace the Smoke Cut Filter in the following cases. (x page 242) gg The filter is dirty. gg The recommended time to - Panasonic PT-RS30K | Operating Instruction - Page 196
the outer case. ffWhen using chemically treated dust cloths, follow the instructions written on its packaging. Lens front surface Wipe off dirt and maintenance of the filter. (x pages 58, 68) ff Make sure that the projector is stable, and perform the maintenance in a safe place even if the filter - Panasonic PT-RS30K | Operating Instruction - Page 197
pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port of the projector body if there are any. ffWhen the air filter unit is removed, proceed to "Performing maintenance of the air filter unit" (x page 198) next. Attention - Panasonic PT-RS30K | Operating Instruction - Page 198
the air filter unit" (x page 198) next. Attention ff After washing the air filter unit, dry it thoroughly before attaching it back to the projector. Attaching a wet unit will cause an electric shock or malfunction. ff Do not disassemble the air filter unit. Note ff Replace the air filter unit - Panasonic PT-RS30K | Operating Instruction - Page 199
arrow to close (Fig. 2), and tighten the air filter cover fixing screw using a Phillips screwdriver. ffWhen the air filter unit is attached to the projector, proceed to "Resetting the filter counter" (x page 199) next. Note ff Make sure that the air filter unit is properly attached before using the - Panasonic PT-RS30K | Operating Instruction - Page 200
filter unit, remove large foreign objects and dust from the long life filter cover, air filter unit compartment and the air intake port of the projector body if there are any. ffWhen the air filter unit is removed, proceed to "Performing maintenance of the air filter unit" (x page 200) next - Panasonic PT-RS30K | Operating Instruction - Page 201
grips on the air filter unit (a) and (b) will be outside the guides on the long life filter cover (e) and (f), and push in the two air filter units attached) to the long life filter mount clasp on the projector body. ffThe long life filter cover has no difference between top and bottom. 2) - Panasonic PT-RS30K | Operating Instruction - Page 202
product, consult your dealer. Attention ff Make sure to turn off the power before replacing the filter. (x pages 58, 68) ff Make sure that the projector is stable, and perform the maintenance in a safe place even if the filter falls accidentally. Note ff The replacement cycle of the air filter unit - Panasonic PT-RS30K | Operating Instruction - Page 203
(Model No.: ET‑EMFU330) is attached instead of the standard air filter unit attached to the projector. The Long Life Filter Unit uses two of the same standard air filters attached to the projector or the Replacement Filter Unit (Model No.: ET‑EMF330) (accessory/optional accessory). 1) Remove the two - Panasonic PT-RS30K | Operating Instruction - Page 204
Troubleshooting Troubleshooting Review the following points. For details, see the corresponding pages. Problems problem with the external device to output images? ff Is a signal which is not compatible with the projector computer type, refer to the user manual provided with your computer.) ff Is - Panasonic PT-RS30K | Operating Instruction - Page 205
6 Maintenance - Troubleshooting Problems Lens shift cannot be adjusted. Cannot control the projector with Art-Net. SETTINGS] correct? ff Check the 3D eyewear settings. ff Is a signal which is supported by the projector being input? ff Is it synchronized? Check the 3D eyewear settings. ff Change the - Panasonic PT-RS30K | Operating Instruction - Page 206
Chapter 6 Maintenance - Self-diagnosis display Self-diagnosis display There is a self-diagnosis display on the side of the projector. Self-diagnosis display will automatically display the value of the input supply voltage, or details of errors or warnings when they occur. (x page 30) The - Panasonic PT-RS30K | Operating Instruction - Page 207
Chapter 6 Maintenance - Self-diagnosis display Error/warning alphanumeric symbol Error/warning alphanumeric symbol content F57 Radiator fan 8 warning F58 Radiator fan 9 warning F59 Radiator fan 10 warning F70 Radiator fan 11 warning F71 Radiator fan 12 warning F72 Exhaust fan 1 warning - Panasonic PT-RS30K | Operating Instruction - Page 208
temperature*1. Or remove any objects that are blocking the air exhaust port. The operating environment temperature is too low. Use the projector in an appropriate operating environment temperature*1. The input supply voltage is low. Use electric wiring that can sufficiently withstand the power - Panasonic PT-RS30K | Operating Instruction - Page 209
Chapter 7 Appendix This chapter describes specifications and after-sales service for the projector. ENGLISH - 209 - Panasonic PT-RS30K | Operating Instruction - Page 210
of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query 33 34 35 Projector name query xxxxx Manufacturer name query Model name query Other information queries Class information query Panasonic RZ31K RS30K xxxxx 1 - Panasonic PT-RS30K | Operating Instruction - Page 211
. URL http://pjlink.jbmia.or.jp/english/ Using Art-Net function Since the network function of the projector supports the Art-Net function, you can control the projector settings with the DMX controller and application software using the Art-Net protocol. Channel definition The following table - Panasonic PT-RS30K | Operating Instruction - Page 212
Chapter 7 Appendix - Technical information rrINPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [1]) No operation RGB1 RGB2 No operation DVI‑D HDMI SDI1 SDI2 No operation Execute P IN P, USER1 Execute P IN P, USER2 Execute P IN P, USER3 No operation Performance 0‑7 8‑15 16‑23 24‑31 32‑39 40‑ - Panasonic PT-RS30K | Operating Instruction - Page 213
Chapter 7 Appendix - Technical information rrLENS H SHIFT, LENS V SHIFT, LENS FOCUS, LENS ZOOM Lens adjustment Operation stop Lens adjustment Performance (-) High speed (-) Low speed (-) Fine adjustment (+) Fine adjustment (+) Low speed (+) High speed 0‑31 32‑63 64‑95 96‑159 160‑191 192‑223 224‑ - Panasonic PT-RS30K | Operating Instruction - Page 214
Chapter 7 Appendix - Technical information rrFADE-IN, FADE-OUT (when [Art-Net CHANNEL SETTING] is set to [1] or [USER]) Operate together with SHUTTER. OFF 0.5s 1.0s 1.5s 2.0s 2.5s 3.0s 3.5s 4.0s 5.0s 7.0s 10.0s No operation Performance 0‑15 16‑31 32‑47 48‑63 64‑79 80‑95 96‑111 112‑127 128‑143 - Panasonic PT-RS30K | Operating Instruction - Page 215
using the Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reflect the controls of all channels to the projector, set "ENABLE/DISABLE" of channel 11 to "Disable" and then back to "Enable". ff To create/register the USER - Panasonic PT-RS30K | Operating Instruction - Page 216
"admin1") Password of above administrator rights user (default password is "panasonic") 8-byte random number obtained in Step 2) Command transmission method Transmit Header Command example Data length '0' 0x30 1 byte ffExample: The projector is powered on "00001" (CR) rrError response '0' 0x30 - Panasonic PT-RS30K | Operating Instruction - Page 217
Control command (ASCII string) Undefined length Header Command example Data length '0' 0x30 1 byte '0' 0x30 1 byte ffExample: The power of the projector is in standby status "00000" (CR) rrError response Data section Control command (ASCII string) Undefined length Message Data length String - Panasonic PT-RS30K | Operating Instruction - Page 218
9p (male) D-Sub 9p (female) D-Sub 9p (male) Communication cable Communication cable When connecting using DIGITAL LINK compatible device Projector connecting terminals DIGITAL LINK compatible device DIGITAL LINK DIGITAL LINK D-Sub 9p (female) Computer LAN cable (straight) D-Sub 9p (male - Panasonic PT-RS30K | Operating Instruction - Page 219
D‑Sub 9-pin (male) Outside view (9) (6) (5) (1) Chapter 7 Appendix - Technical information Pin No. (1) (2) (3) (4) (5) (6) (7) (8) (9) Signal name ― RXD TXD ― GND ― RTS CTS ― Details NC Received data Transmitted data NC Earth NC Connected internally NC Communication conditions (Factory - Panasonic PT-RS30K | Operating Instruction - Page 220
the computer. ff If an invalid parameter is sent, the "ER402" response is sent from the projector to the computer. ff ID transmission in RS‑232C supports ZZ (ALL) and 01 to 64, as well as 0A to 0Z groups. ff If a command is sent with an ID designated, a response will be - Panasonic PT-RS30K | Operating Instruction - Page 221
Chapter 7 Appendix - Technical information Control command The following table lists the commands that can be used to control the projector using a computer. rrProjector control command Command Details PON POF Power on Power standby QPW Power query IIS Switching the input signal OSH QSH - Panasonic PT-RS30K | Operating Instruction - Page 222
where remote control signals cannot reach. Use the terminal on the connecting terminals of the projector to connect to the control panel. Remote control Contact control Remote control/contact control Standby Lit Light source RGB1 DIGITAL LINK RGB2 HDMI Installation locations - Panasonic PT-RS30K | Operating Instruction - Page 223
, 1080/24p, 1080/25p, 1080/30p, 1080/50p, 1080/60p *2 640 x 480 - 1 920 x 1 200 Non-interlaced signal, dot clock frequency: 25 MHz - 162 MHz *3 Only supports 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24sF, 1080/24p, 1080/25p, 1080/30p, 1080/50p, and 1080/60p *4 Dual link - Panasonic PT-RS30K | Operating Instruction - Page 224
Chapter 7 Appendix - Technical information Control device password To initialize your password, consult your distributor. Upgrade Kit If the optional Upgrade Kit (Model No.: ET‑UK20) is applied, the following functions are extended. Function Adjustment range of [VERTICAL KEYSTONE] Adjustment - Panasonic PT-RS30K | Operating Instruction - Page 225
Chapter 7 Appendix - Technical information List of compatible signals The following table specifies the video signals that the projector can project. For details of SDI signal, refer to "List of single link SDI compatible signals" (x page 227) and "List of dual link SDI compatible - Panasonic PT-RS30K | Operating Instruction - Page 226
is described in the format column. The resolution may not be selected in the computer even if the projector is compatible for the signal that does not have l in the plug and play column. *2 Pixel- pixels in the image processing circuit and projects the image. *6 Only for PT‑RZ31K 226 - ENGLISH - Panasonic PT-RS30K | Operating Instruction - Page 227
of display dots. The number of display dots is as follows. gg PT‑RZ31K: 1 920 x 1 200 gg PT‑RS30K: 1 400 x 1 050 ff The "i" at the end of compatible signals The following table specifies the single link SDI signals that the projector can project. Signal name (SIGNAL FORMAT) 480/60i 576/50i 720/60p - Panasonic PT-RS30K | Operating Instruction - Page 228
.5 148.5 148.5 148.5 *1 The signal with 1/1.001x vertical scanning frequency is also supported. Format 3G-SDI Level-A 3G-SDI Level-B 3G-SDI Level-A 3G-SDI Level-B The following table specifies the dual signal SDI signals that the projector can project. Signal name (SIGNAL FORMAT) 1080/60i 1080/ - Panasonic PT-RS30K | Operating Instruction - Page 229
148.5 148.5 148.5 148.5 *1 The signal with 1/1.001x vertical scanning frequency is also supported. Format HD‑SDI HD‑SDI HD‑SDI 3G-SDI Level-A 3G-SDI Level-B 3G- specifies the simultaneous input (2D) compatible video signals that the projector can project. Signal name (SIGNAL FORMAT) 1080/60p 1080/ - Panasonic PT-RS30K | Operating Instruction - Page 230
Chapter 7 Appendix - Technical information List of 3D compatible signals The following table specifies the 3D compatible video signals that the projector can project. ffAbbreviations for input formats and 3D formats in the table have the following meanings. ggFP: Frame packing format ggSBS: Side - Panasonic PT-RS30K | Operating Instruction - Page 231
60.0 Dot clock freq. (MHz) 162.0 131.5 146.3 119.5 141.5 138.5 158.3 154.0 HDMI FP SBS*1 TB DVI‑D FS SBS*1 TB LBL FS ―l l l l l l l l―l― *1 Supports half. *2 VESA CVT RB (Reduced Blanking) compliant Signal name (SIGNAL FORMAT) 720/60p 720/50p 1080/60i 1080/50i 1080/24p 1080/24sF 1080 - Panasonic PT-RS30K | Operating Instruction - Page 232
146.3 119.5 141.5 138.5 158.3 154.0 RGB1/RGB2 SDI1/SDI2 H‑D R1‑2 S1‑2 SBS*1 TB LBL FS SBS*1 TB LBL 3G l l l l l l l ll― l ―l ll― *1 Supports half. *2 VESA CVT RB (Reduced Blanking) compliant Note ff DIGITAL LINK input compatible signal is the same as HDMI input compatible signal. 232 - Panasonic PT-RS30K | Operating Instruction - Page 233
DLP chip Display system DLP chip x 3, DLP projection system Number of pixels PT‑RZ31K PT‑RS30K 2 304 000 pixels (1 920 x 1 200 dots) 1 470 000 pixels (1 400 x 1 050 dots) Lens Optional Light source Laser and 40 °C (104 °F). When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING - Panasonic PT-RS30K | Operating Instruction - Page 234
10 mA D‑Sub 9 p, 1 set each, RS‑232C compliant, for computer control M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control 1 set, D‑Sub 9 p, for contact control 1 set, RJ‑45, for network and DIGITAL LINK connections (HDBaseTTM compliant), PJLink compatible - Panasonic PT-RS30K | Operating Instruction - Page 235
can be used with the projector, refer to "List of compatible Dot clock frequency: 162 MHz or less ff PIAS (Panasonic Intelligent Auto Scanning) system YCBCR/YPBPR signal input ff or less ff The SYNC/HD and VD terminals do not support 3 value SYNC. DVI‑D signal input ff Moving image signal resolution - Panasonic PT-RS30K | Operating Instruction - Page 236
Dimensions Unit: mm Chapter 7 Appendix - Dimensions 1 070 (42-1/8") 1 249.2 (49-3/16") 25 (31/32") 90 (3-17/32") 245.5 (9-21/32") 373 (14-11/16") 418 (16-15/32") 45 (1-25/32") 350 (13-25/32") 290 (11-13/32") 580 (22-27/32") 700 (27-9/16") * Actual dimensions may differ depending on the - Panasonic PT-RS30K | Operating Instruction - Page 237
335.8 (13-7/32") 25.6 (1") 258.9 (10-3/16") Chapter 7 Appendix - Dimensions rrWhen the optional Long Life Filter Unit (Model No.: ET‑EMFU330) is attached 112.2 (4-13/32") 290 (11-13/32") 580 (22-27/32") 700 (27-9/16") ENGLISH - 237 73.3 (2-7/8") - Panasonic PT-RS30K | Operating Instruction - Page 238
. (Fig. 4) ii) Pull out the air filter unit. (Fig. 5) ffWhen pulling out, confirm that the air filter unit comes off from the tabs on the projector body (d). ffAfter pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port - Panasonic PT-RS30K | Operating Instruction - Page 239
ffAttach the hook on the tip of the drop-prevention string attached to the projector body to the long life filter mount clasp supplied with the Long Life Filter the grips on the air filter unit (a) and (b) will be outside the guides on the long life filter cover (e) and (f), and push in the direction - Panasonic PT-RS30K | Operating Instruction - Page 240
Attaching the long life filter cover Attach the long life filter cover with the air filters to the long life filter mount clasp on the projector body. Long life filter cover fixing screws Fig. 1 Fig. 2 1) Attach the long life filter cover to the long life filter mount clasp. (Fig. 1) ffAttach the - Panasonic PT-RS30K | Operating Instruction - Page 241
7 Appendix - Attaching the Long Life Filter Unit (optional) Note ff Continuing to use the projector with incorrect [FILTER TYPE] setting may cause failure of the projector. ff When the projector is used without resetting the filter counter, the actual filter runtime (counter numeric value) will not - Panasonic PT-RS30K | Operating Instruction - Page 242
. (Fig. 2) ii) Pull out the air filter unit. (Fig. 3) ffWhen pulling out, confirm that the air filter unit comes off from the tabs on the projector body (d). ffAfter pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port - Panasonic PT-RS30K | Operating Instruction - Page 243
. i) Hook the Smoke Cut Filter frame at the bottom side to the tabs on the air filter unit compartment (Smoke Cut Filter compartment) of the projector body (d). (Fig. 1) ii) While lightly pressing inward as described with the arrow (Fig. 1), hook the center area of the Smoke Cut Filter frame at the - Panasonic PT-RS30K | Operating Instruction - Page 244
SETTING] → [FILTER COUNTER RESET] is executed, the filter counter is reset. Note ff [FILTER TYPE] cannot be set to [SMOKE CUT] when the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set to [LONG LIFE1], [LONG LIFE2], or [LONG LIFE3]. Set [OPERATING MODE] to anything other than - Panasonic PT-RS30K | Operating Instruction - Page 245
218 button button [SERVICE PASSWORD] 157 Projector body 30, 69 Projector body 30, 81 Setting ID number LIGHTS-OUT] 142 Specifications 233 [DVI-D IN] 119 [NO SIGNAL SHUT-OFF] 142 sRGB-compliant video 94 [DYNAMIC CONTRAST] 92 [STANDBY - Panasonic PT-RS30K | Operating Instruction - Page 246
68 Switching on the projector 60 Switching the input signal 69 [SYSTEM DAYLIGHT VIEW] 91 [SYSTEM SELECTOR] 94 T Temperature indicator 193 [TEST PATTERN] 85, 160 button Remote control 27, 78 [TEXT CHANGE] 165 [TINT] 88 Troubleshooting 204 Two - Panasonic PT-RS30K | Operating Instruction - Page 247
ıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2016 Panasonic System Communications Company of North America 5th Floor, Two Riverfront Plaza, Newark, NJ
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
 |
 |
Thank you for purchasing this Panasonic product.
■
This manual is common to all the models regardless of suffixes of the Model No.
z
for India
PT-RZ31KD
z
for other countries or regions
PT-RZ31K
/
PT-RS30K
■
Before operating this product, please read the instructions carefully and save this manual
for future use.
■
Before using this product, be sure to read “Read this first!” (
x
pages 5 to 13).
DPQP1062ZA
DLP™ Projector
Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No.
PT-RZ31K
PT-RS30K
The projection lens is sold separately.