Panasonic PT-RS30K ET-CUK10CUK10P Operating Instructions

Operating Instructions

Auto Screen Adjustment Upgrade Kit

Model No.

ET-CUK10

ET-CUK10P

Enables the Following

Applying this upgrade kit expands the functions of the Geometric & Setup

Management Software (Geometry Manager Pro), and allows automatic

adjustment of geometry correction, edge blending, color, and brightness

according to the shape of the screen through use of an externally connected

camera.

•

A camera (not supplied) is required to use these functions.

•

Both the Geometric & Setup Management Software (Geometry Manager

Pro) and the Auto Screen Adjustment plug-in software must be installed to

apply this upgrade kit.

You can download the Geometric & Setup Management Software

(Geometry Manager Pro) and its operating instructions, and the Auto

Screen Adjustment plug-in software from the Panasonic website (https://

panasonic.net/cns/projector/pass/). To download, you must be a registered

PASS* member and log into the PASS.

* PASS: Panasonic Professional Display and Projector Technical Support

Website

For more information, see the Panasonic web site (https://panasonic.net/

cns/projector/pass/).

Content Con

fi

rmation

KeyCode label x 1

Attention

•

Dispose of the packaging appropriately after removing from the product.

Precautions for Use

■

Computer requirements

The following is required to apply the upgrade kit.

•

An environment that can connect to the Internet

•

Member registration with PASS (free of charge)

•

Installation of the Geometric & Setup Management Software (Geometry

Manager Pro) and the Auto Screen Adjustment plug-in software.

For details on system requirements, refer to the operating instructions for the

Geometric & Setup Management Software (Geometry Manager Pro).

R

Precautions for Use (continued)

■

Auto Screen Adjustment

The following are required to perform Auto Screen Adjustment.

•

Camera and camera lens (not supplied)

•

Projector connection via LAN

For details on supported projectors, cameras, and camera lenses, check the

Panasonic website (https://panasonic.net/cns/projector/pass/).

■

Downloading the software

Log into the PASS on the Panasonic website (https://panasonic.net/cns/

projector/pass/), click [Software Download] on the top page of the member

page, and follow the onscreen instructions to download the Geometric & Setup

Management Software (Geometry Manager Pro) and Auto Screen Adjustment

plug-in software.

Notes

•

Download the Auto Screen Adjustment plug-in software together with the

Geometric & Setup Management Software (Geometry Manager Pro).

•

If the Geometric & Setup Management Software (Geometry Manager Pro) is

already installed, check its version and update to the latest version if necessary.

For details on the latest version of the Geometric & Setup Management Software

(Geometry Manager Pro), check the software download page of the Panasonic

website (https://panasonic.net/cns/projector/pass/).

■

Software installation

Installing the Geometric & Setup Management Software (Geometry

Manager Pro)

Double-click the downloaded “Installer.exe”

fi

le, and follow the on-screen

instructions to install the application.

•

When installation is complete, a shortcut icon is created on the desktop.

Installing the Auto Screen Adjustment plug-in software

Double-click the downloaded “AusInstaller.exe”

fi

le, and follow the on-screen

instructions to install the application.

•

When installation is complete, the [AUTO ADJUST] (Auto Screen

Adjustment) button at the top right of the Geometric & Setup Management

Software (Geometry Manager Pro) main screen will be enabled.

Note

•

An error message will appear if the latest version of the Geometric & Setup

Management Software (Geometry Manager Pro) is not installed. Install the

latest version if necessary.

For details on the latest version of the Geometric & Setup Management

Software (Geometry Manager Pro), check the software download page of

the Panasonic website (https://panasonic.net/cns/projector/pass/).

■

About activating the product

Activation using the key code indicated on the key code label must be

performed to apply this upgrade kit.

Log into the PASS on the Panasonic website (https://panasonic.net/cns/

projector/pass/), click [Activation] in the side menu on the top page of the

member page, and follow the on-screen instructions to perform activation.

Note

•

You may need to update the

fi

rmware version of the projector before

performing activation in some cases.

For details, check the information found on software download page of the

Panasonic website (https://panasonic.net/cns/projector/pass/).

Trademarks

The company names, product names or other names noted in these operating

instructions are trademarks or registered trademarks of the respective

companies. Note that ® and TM marks are not indicated in these operating

instructions.

Cautions

•

Do not use or reproduce part or all of these operating instructions without

permission.

•

The content of these operating instructions is subject to change without

noti

fi

cation in the future.

Web Site : https://panasonic.net/cns/projector/

© Panasonic Corporation 2015

Thank you for purchasing this Panasonic product.

•

Please read these instructions carefully, and save this manual for future

use.

•

These manual is applicable to all models, regardless of the trailing alpha-

betic characters in the product number.

Product

Number

Product Name

Description

ET-CUK10


Upgrade Kit

Activating on each projector

enables the “Auto Screen

Adjustment plug-in software”

functions.

ET-CUK10P


Upgrade Kit (PC)

Activating on a computer on

which the software is installed

enables the “Auto Screen

Adjustment plug-in software”

functions.

SS1115

M1047 -PS

Printed in Japan

TQBH0396-1

Panasonic PT-RS30K ET-CUK10CUK10P Operating Instructions

Panasonic PT-RS30K Manual

Panasonic PT-RS30K manual content summary: