Panasonic PT56LCZ7 Lifi Hdtv - Page 27

Basic Operation 6. Press ▲▼ to select "ANT in". 7. Press ◄► to select "Antenna" or "Cable". Program channel ANT in Auto Manual Signal meter Cable 8. Press ▲▼ to select "Auto". 9. Press OK to display the Auto program menu. Program channel ANT in Auto Manual Signal meter Cable 10. Press ▲▼ to select "All channels", "Analog only", or "Digital only". 11. Press OK to start scan. Auto program All channels Analog only Digital only Auto program Scanning digital channel Progress Quit 40% 12. After Auto program is complete, the unit will return to Manual program mode. To place the channels that were located by auto scan in memory, move the cursor to "Apply" and press OK. (p. 27-28) If OK is not pressed after selecting APPLY, the channels will not be memorized. Notes • Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted manually using the "Manual program setting". (p. 27-28) • "Auto program" must be done when you select the input signal for the first time or whenever you change the antenna configuration. Manual program setting Use this procedure when changing setting of receiving channels or changing the channel display. Also, use to add or delete channels from channel list manually. Procedure 1. Press MENU to display the Main Menu screen. 2. Press ▲▼ to select "Setup" icon. 3. Press OK to display the Setup menu. Menu EZ Sync Picture Audio Timer Lock Memory card Setup 4. Press ▲▼ to select "Program channel". 5. Press OK to display the Program channel menu. • If Lock (p. 41) has been set, you must enter your password to display the Program channel menu. Setup 1/2 Surf mode All Language Program channel External devices CC EZ Sync setting 6. Press ▲▼ to select "Manual". 7. Press OK to enter the Manual program screen. Program channel ANT in Auto Manual Signal meter Cable 27