Panasonic PT56LCZ7 Lifi Hdtv - Page 37

Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may not be available. PC Adjust You can adjust the picture when "Input select" is selected to "PC". (p. 29) Procedure 1. Press ▲▼ to select "PC adjust". 2. Press OK to display the PC adjust menu. Picture Color temp. Color mgmt. AI picture Pro setting Zoom adjust PC adjust Other adjust 2/2 Warm On Off 3. Press ▲▼ to select each item. 4. Press ◄► to adjust each item. PC adjust Normal Sync Dot clock H-position V-position Clock phase Input resolution H-frequency V-frequency No H & V -3 0 0 0 VGA 31.4kHz 60.0Hz Item Normal Explanations Resets all picture adjustments to factory default settings. Sync • H&V : The H and V sync signals are input from the HD/VD connector. • On G : Uses a synchronized signal on the Video G signal, which is input from the G connector. Dot clock Adjusts horizontal size. H-Position Adjusts horizontal position. V-Position Adjusts vertical position Clock phase Adjusts in order to remove any picture interference or contour blurring which may occur in computer images. Input resolution Switches to wide display. Input signal switched from XGA to WXGA and from VGA to WVGA. H-Frequency/ V-Frequency Displays the frequencies of the PC signal currently being adjusted. Displays the H (Horizontal) / V (Vertical) frequencies. Display range: Horizontal 15-110 kHz Vertical 48 - 120 Hz Note • This function is available only when the signal being viewed is from a PC. Other Adjust Other detailed picture adjustments can be made. This function is not available when "Input select" is selected to "PC". (p. 29) Procedure 1. Press ▲▼ to select "Other adjust". 2. Press OK to display the Other adjust menu. Picture Color temp. Color mgmt. AI picture Pro setting Zoom adjust PC adjust Other adjust 2/2 Warm On Off 3. Press ▲▼ to select each item. 4. Press ◄► to adjust each item. Other adjust Video NR 3D Y/C filter Color matrix Block NR Mosquito NR Black level 3:2 pulldown On On SD On On Dark On Item Explanations Video NR Reduces noise, commonly called snow. Leave off when receiving a strong signal. 3D Y/C filter Minimizes noise and cross-color in the picture. Color matrix Select SD or HD. • SD : Color matrix is set same as a normal TV system (NTSC). • HD : Color matrix is set same as a High-Definition system (ATSC). With a 480p signal from equipment connected to COMPONENT VIDEO INPUT (Y, PB, PR) or HDMI INPUT terminals or from the unit's DTV tuner, you can select SD or HD color matrix to display the most natural color. Notes • This feature is available only with 480p signals. • The default setting with HDTV signals (720p, 1080i or 1080p) is HD color matrix. • The default setting with NTSC signals (480i) is SD color matrix. Block NR Reduces noise of specific digital signals of DVD, STB, etc. Mosquito NR Black level Reduces HDTV flicker noise in the contoured sections of an image. Select Light or Dark [Dark : VIDEO, Light : 480i/480p/720p/1080i/1080p] Invalid for Digital channel, Analog channel, PC and Photo viewer. 3:2 pulldown Transfers film to video. Advanced Operation 37