Panasonic PTAE100U PTAE100U User Guide
Panasonic PTAE100U - LCD PROJECTOR Manual
 |
View all Panasonic PTAE100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PTAE100U manual content summary:
- Panasonic PTAE100U | PTAE100U User Guide - Page 1
MENU F ENTER NORMAL DIGITAL ZOOM PROJECTOR Model No. PT-AE100U Before operating this product, please read the instructions carefully and save this manual for future use. For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : [email protected] or visit us at - Panasonic PTAE100U | PTAE100U User Guide - Page 2
Panasonic LCD projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-AE100U important operating and maintenance (servicing) instructions in the literature accompanying - Panasonic PTAE100U | PTAE100U User Guide - Page 3
Replacing the lamp unit 42 Before asking for service 45 Specifications 47 Appendix 49 List of compatible signals 49 Connector pin wiring 50 Projection dimensions calculation methods 50 Dimensions 51 Precautions with regard to safety WARNING If a problem the projector, or if the projector is - Panasonic PTAE100U | PTAE100U User Guide - Page 4
, short-circuits or fire may result. B Ask an Authorized Service Center to carry out any repairs to the power cord that replacing the lamp, be sure to unplug the power cord from the power outlet. B Electric shocks or explosions can result if this is not done. Caution Do not set up the projector - Panasonic PTAE100U | PTAE100U User Guide - Page 5
humidity, please contact an Authorized Service Center yearly to clean the projector. We are in effort to hold your environment clean. Please bring the non repairable unit your Dealer or a Recycling Company. NOTICE: B This product has a High Intensity Discharge (HID) lamp that contains a small amount - Panasonic PTAE100U | PTAE100U User Guide - Page 6
projector at high elevations, so consult your dealer or Authorized Service Center about preparations. Failure to observe this may cause malfunctions. Notes on use In order to get the best picture quality If outside light or light from indoor lamps cloth, read the instructions supplied with the cloth - Panasonic PTAE100U | PTAE100U User Guide - Page 7
(650)572-9675 http://www.kensington.com/ http://www.gravis.com/ . Projector control panel (page 14) 12 Projector # $ % ' & # Air outlet port power cord. & MAIN POWER switch (pages 22 and 23) ' Lamp unit holder (page 43) NOTE: B During projection of an image, the cooling - Panasonic PTAE100U | PTAE100U User Guide - Page 8
projector. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will illuminate or flash. $ LAMP indicator (page 40) This indicator illuminates when it is time to replace the lamp is used to reset the projector adjustment values to the - Panasonic PTAE100U | PTAE100U User Guide - Page 9
equipment such as a video deck. The connector is compatible with S2 and S1 signals, and projector aspect is automatically adjusted according to the type of signal received. & AUDIO input jack (for PC for long periods. B Use only CR2025 batteries as replacement batteries. 17 Preparation - Panasonic PTAE100U | PTAE100U User Guide - Page 10
Connections Notes on connections B Read the instruction manual for each system component carefully before PB/CB PR/CR COMPONENT IN NOTE: B It is better to shut down the computer before turning off the MAIN POWER switch of the projector. B Refer to the list of compatible signals on page 49 for - Panasonic PTAE100U | PTAE100U User Guide - Page 11
range of this projector is 1.2 m - 7.4 m. The lower edge of the projected image falls about 0.1 m from the center of the lens. For details about projected image distances, refer to page 51. Screen Size (16:9) Minimum Distance Maximum Distance 5.08 m(200") 3.81 m(150") 2.54 m(100") 2.03 m(80 - Panasonic PTAE100U | PTAE100U User Guide - Page 12
may not turn on straight away after the power is turned back on. In such cases, the lamp unit will turn back on automatically after a short period. (During this time, the power indicator on the projector will flash green.) B A tinkling sound may be heard while the power indicator is turned off, but - Panasonic PTAE100U | PTAE100U User Guide - Page 13
Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations BACK COLOR BLACK 4:3 H-POS CENTER FRONT/REAR FRONT DESK/CEILING DESK LAMP POWER HIGH LAMP RUNTIME 5H FUNCTION INDEX SELCT ADJ ESC Keystone correction (page 29) SHUTTER - Panasonic PTAE100U | PTAE100U User Guide - Page 14
Menu operation guide # Press the MENU button. The MAIN MENU screen will be displayed. any adjustment changes the setting from the factory set value. Unavailable on-screen menu items This projector has unadjustable items and unusable functions depending on the signal being input. When an item - Panasonic PTAE100U | PTAE100U User Guide - Page 15
signals are being input, the enlargement ratio can be changed within the range of x1 to x3. 28 Correcting keystone distortion When either the projector or the screen is tilted, the keystone distotion will affect the image. You can correct the image proportions by the following procedure. # Use the - Panasonic PTAE100U | PTAE100U User Guide - Page 16
is selected, it may affect the quality of viewing of the original picture. Keep this in mind when selecting the aspect ratio. B If using this projector in places such as cafes or hotels with the aim of displaying programs for viewing for a commercial purpose or for public presentation, note that if - Panasonic PTAE100U | PTAE100U User Guide - Page 17
does in normal projection mode. # Select SHUTTER from the MAIN MENU screen and then press the ENTER button. $ Press any button on either the projector or remote control unit to return to normal operating mode. Changing the display language # Select LANGUAGE from the MAIN MENU screen and then press - Panasonic PTAE100U | PTAE100U User Guide - Page 18
Adjusting the picture Use the F and G buttons to select an item, and then use the I and H buttons to change the setting for that item. For items with bar scales, press the ENTER button or the I or H buttons to display the adjustment screen, and then use the I or H buttons to make the adjustment. - Panasonic PTAE100U | PTAE100U User Guide - Page 19
If signals with a dot clock frequency of 100 MHz or higher are being input, interference may FRONT/REAR FRONT DESK/CEILING DESK LAMP POWER HIGH LAMP RUNTIME 5H FUNCTION INDEX SELCT ADJ screen when no signal is being input to the projector. This sets the background color for the left/right - Panasonic PTAE100U | PTAE100U User Guide - Page 20
projector has become unusually Problem high. Flashing (red) (Lamp unit on) Flashing (red) (Lamp unit off) The temperature The surrounding inside the projector the projector has the temperature has become dangerously suddenly changed. high, causing the lamp unit to be automatically shut off. - Panasonic PTAE100U | PTAE100U User Guide - Page 21
indicator Indicator display Illuminated (red) It is nearly time to Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector is turned on? B The power may have been turned - Panasonic PTAE100U | PTAE100U User Guide - Page 22
unit NOTE: B If you need the lamp replacement, please purchase the lamp unit from our customer service. Lamp unit product no.: ET-LAE100 CAUTION: B Do not use any lamp unit other than the one with the product number indicated above. Warning When replacing the lamp, allow it to cool for at least - Panasonic PTAE100U | PTAE100U User Guide - Page 23
reset the cumulative usage time for the lamp unit to zero. 44 Before asking for service Before asking for service, check the following points. Problem sound can be heard. B The input source which is connected to the projector may not be adjusted correctly. B The audio signal source may not be - Panasonic PTAE100U | PTAE100U User Guide - Page 24
mm) Aspect ratio: 16:9 Display method: 3 transparent LCD panels (RGB) Drive method: Active matrix method Pixels: 415 272 (858 x 484) x 3 panels Lens: Manual zoom (1 - 1.2) / focus lens F 2.0 - 2.3, f 22.0 mm - 26.2 mm Lamp: UHM lamp (120 W) Luminosity: 700 lm/ANSI Scanning frequency - Panasonic PTAE100U | PTAE100U User Guide - Page 25
.500 A 56.250 A 57.283 A 51.382 A 76.500 A 65.000 A 75.000 A 78.750 A 94.500 A 44.897 A 76.150 A 94.200 A 108.000 B 100.000 B Format Video/S-Video Video/S-Video YPBPR YPBPR YPBPR YPBPR/PC YPBPR/PC YPBPR PC PC PC PC PC PC PC PC PC PC PC - Panasonic PTAE100U | PTAE100U User Guide - Page 26
for earth. Pins . and 1 functions are only valid when supported by the computer Projection dimensions calculation methods The following methods will allow mm (˝)> 235.5 (9 9/32) 242 (9 17/32) INPUT KEYSTONE VOLUME POWER ON(G) LAMP TEMP STANDBY(R) 49.7 (1 31/32) 85 (3 11/32) 80 (3 5/32) - Panasonic PTAE100U | PTAE100U User Guide - Page 27
These Operating Instructions are printed on recycled paper. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico Inc. ("PSC") Ave. 65 de
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
TQBJ 0095-1
LCD Projector
Operating Instructions
Model No.
PT-AE100U
R
DIGITAL ZOOM
ENTER
MENU
NORMAL
F
MUTE
INPUT
ASPECT
VOLUME
Before operating this product, please read the instructions carefully and save this
manual for future use.
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.co.jp/global/
(Puerto Rico)
ENGLISH