Panasonic PTL200U PTL200U User Guide
Panasonic PTL200U - LCD PROJECTOR Manual
 |
View all Panasonic PTL200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PTL200U manual content summary:
- Panasonic PTL200U | PTL200U User Guide - Page 1
PC COMPONENT KEYSTONE MENU ENTER NORMAL FREEZE MODE MEMORY ASPECT PICTURE USER MUTE VOLUME SD SD MENU TIME LCD PROJECTOR Operating Instructions Model No. PT-L300U PT-L200U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ 0120-1 - Panasonic PTL200U | PTL200U User Guide - Page 2
Panasonic LCD projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-L300U / PT and maintenance (servicing) instructions in the literature accompanying the product. 2 - Panasonic PTL200U | PTL200U User Guide - Page 3
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Model Number: PT-L300U / PT-L200U Trade Name: Panasonic Responsible party: Matsushita Electric Corporation of America. Address: One Panasonic Way Secaucus - Panasonic PTL200U | PTL200U User Guide - Page 4
computer ...20 Setting-up 21 Projection methods 21 Projector position 21 Basic Operation Starting to use 22 On-screen menus 24 Menu screens 24 Menu operation guide 26 Unavailable on-screen menu items...26 Returning to Replacing the lamp unit 54 Before calling for service 57 Specifications - Panasonic PTL200U | PTL200U User Guide - Page 5
or modify it in any way. B High voltages which can cause fire or electric shocks are present inside the projector. B For any inspection, adjustment and repair work, please contact an Authorized Service Center. Clean the power cord plug regularly to prevent it from becoming covered in dust. B If dust - Panasonic PTL200U | PTL200U User Guide - Page 6
could result. B If any water gets inside the projector, contact an Authorized Service Center. Do not insert any foreign objects into the projector. B Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric - Panasonic PTL200U | PTL200U User Guide - Page 7
can cause burns. Before replacing the lamp, be sure to unplug the power cord from the power outlet. B Electric shocks or explosions can result if this is not done. Caution Do not cover the air inlet or the air outlet. B Doing so may cause the projector to overheat, which can cause fire - Panasonic PTL200U | PTL200U User Guide - Page 8
shocks can result if this is not done. Ask an Authorized Service Center to clean inside the projector at least once a year. B If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation. B It is a good idea to clean the inside of - Panasonic PTL200U | PTL200U User Guide - Page 9
Accessories Check that all of the accessories shown below have been included with your projector. Remote control unit (N2QAFA000002 x1) Video/Audio cable [3.0 AAA batteries for PICTURE USER MUTE VOLUME SD SD MENU TIME LCD PROJECTOR Power cord Carrying bag (K2CG3FR00001 x 1) (TPEP008 x1) 9 - Panasonic PTL200U | PTL200U User Guide - Page 10
work should only be carried out by a qualified technician. If using this projector at high elevations (above 1400 m), set the FAN CONTROL to HIGH. to get the best picture quality If outside light or light from indoor lamps is shining onto the screen, the images projected will not have good contrast - Panasonic PTL200U | PTL200U User Guide - Page 11
lamp's characteristics, usage conditions and the installation environment, especially when it is subjected to a continuous use for more than 10 hours. About the liquid crystal panel The liquid crystal panel of the projector -treated cloth, read the instructions supplied with the cloth before - Panasonic PTL200U | PTL200U User Guide - Page 12
used to unlock the front adjustable legs. Press to adjust the angle of tilt of the projector. + Air filter (page 53) , Remote control signal receptor (page 17) - MAIN the cover. / Access lamp (page 42) Flashes while the projector is being accessed for reading or writing the data in the SD memory - Panasonic PTL200U | PTL200U User Guide - Page 13
Preparation Projector $ # ' % & # Air outlet port Do not cover power cord is connected here. Do not use any power cord other than the accessory power cord. & Lamp unit holder (page 55) NOTE: B During projection of an image, the cooling fan will operate, emitting a small noise - Panasonic PTL200U | PTL200U User Guide - Page 14
MENU TIME / * + 0 1 2 3 LCD PROJECTOR + 456 B The remote control unit and the projector itself have the same control buttons available. # indicator will illuminate or flash. $ LAMP indicator (page 52) This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit - Panasonic PTL200U | PTL200U User Guide - Page 15
position is tilted upward or downward. , NORMAL button (page 27) This button is used to reset the projector adjustment values to the factory default settings. - ASPECT button (page 30) This button is used for aspect adjustment (vertical and horizontal proportions). . MUTE button (page 33) This - Panasonic PTL200U | PTL200U User Guide - Page 16
#% & ' ( $ #$% ' ( # AUDIO L-R input jacks (page 18) $ VIDEO input as a video deck. The connector is compatible with S2 and S1 signals, and projector aspect is automatically adjusted according to the type of signal received. & DVI-D IN connector - Panasonic PTL200U | PTL200U User Guide - Page 17
Using the remote control unit Operating range # Open the cover. Preparation $ Insert the batteries so that the polarities are correct, and then close the cover. ʓ ʓʵ - Panasonic PTL200U | PTL200U User Guide - Page 18
Connections Notes on connections B Read the instruction manual for each system component carefully before To audio output To video output * This illustration is an example of connection for the PT-L300U. Video deck NOTE: B Only one audio system circuit is available for the AUDIO IN L-R - Panasonic PTL200U | PTL200U User Guide - Page 19
DVD player To audio output To YPBPR output * This illustration is an example of connection for the PT-L300U. NOTE: B Refer to page 61 for a list of compatible YPBPR signals which can be input to the projector. B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish - Panasonic PTL200U | PTL200U User Guide - Page 20
-D output To audio output To RGB output * This illustration is an example of connection for the PT-L300U. NOTE: B It is better to shut down the computer before turning off the MAIN POWER switch of the projector. B Refer to the list of compatible signals on page 61 for the types of RGB signals - Panasonic PTL200U | PTL200U User Guide - Page 21
) NOTE: B You will need to purchase the separate ceiling bracket (ET-PKE300) when using the ceiling installation method. Projector position The projection range of this projector is 1.2 m - 7.4 m. The lower edge of the projected image falls about 0.1 m from the center of the lens. For details - Panasonic PTL200U | PTL200U User Guide - Page 22
CMPNT SD YŋPBŋPR ( While pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. If there is keystone distortion in the projected images, carry out keystone correction as described on page 28. USER MUTE VOLUME SD SD MENU TIME SD CARD *"DVI" is only for PT-L300U. - Panasonic PTL200U | PTL200U User Guide - Page 23
may not turn on straight away after the power is turned back on. In such cases, the lamp unit will turn back on automatically after a short period. (During this time, the power indicator on the projector will flash green.) B A tinkling sound may be heard while the power indicator is turned off, but - Panasonic PTL200U | PTL200U User Guide - Page 24
for this projector can be carried out by selecting the operations from on-screen menus. The general arrangement of these menus is shown below. MAIN MENU ɹM E N U KEYSTONE PICTURE POSITION SHUTTER VOLUME LANGUAGE OPTION SD MENU SELECT ENTER EXIT Keystone correction (page 28) For PT-L300U - Panasonic PTL200U | PTL200U User Guide - Page 25
Basic Operation PICTURE menu (page 34) When an S-VIDEO/VIDEO signal is being input When a YPBPR signal is being input or SD CARD is selected PICTURE PICTURE MODE NORMAL CONTRAST 0 BRIGHT 0 COLOR 0 TINT 0 SHARPNESS 0 COLOR TEMP. 0 GAMMA ADJUST MEMORY SAVE MEMORY LOAD TV-SYSTEM - Panasonic PTL200U | PTL200U User Guide - Page 26
Menu operation guide # green when any adjustment changes the setting from the factory set value. For items without any selective arrow or bar-scale, press will then be displayed. Unavailable on-screen menu items This projector has unadjustable items and unusable functions depending on the signal - Panasonic PTL200U | PTL200U User Guide - Page 27
setting All items displayed will be returned to their factory default settings, and the bar scale will appear white. Indicates the current adjustment value B The positions of triangle symbols vary depending on the type of signal being input. Using the freeze function The picture will alternate - Panasonic PTL200U | PTL200U User Guide - Page 28
Correcting keystone distortion When either the projector or the screen is tilted, the keystone distortion will affect the image. You can correct the image proportions by the following procedure. For PT-L300U Horizontal and vertical keystone distortion can be corrected by following procedures. # - Panasonic PTL200U | PTL200U User Guide - Page 29
For PT-L200U Vertical keystone distortion can be corrected by following procedures. # Use the KEYSTONE button to obtain image balance. KEYSTONE - Panasonic PTL200U | PTL200U User Guide - Page 30
M-NTSC, PAL-M, PAL60, 525p and 525i signals are being input to the PT-L300U. Illustrations for aspect ratio settings are shown on the next page. Refer to signal when being played by devices such as a DVD player. B When the projector is set to the "S1/S2" setting shown above, it will detect those - Panasonic PTL200U | PTL200U User Guide - Page 31
preserves original ratio V SCROLL 4:3 Input signal Enlarges image approximately 1.2 times (Vertical position can be adjusted by the G and F buttons) S4:3 4:3 Input signal S16:9 (PT-L300U only) Image which is projected at an aspect ratio of 4:3 or 16:9 without being expanded vertically. 31 - Panasonic PTL200U | PTL200U User Guide - Page 32
Selecting the picture mode You can select the appropriate picture mode for the type of projected image by the following procedure. (The picture mode can be also selected in the PICTURE menu.) # Press the MODE PICTURE button to display the PICTURE menu. PICTURE MODE NORMAL $ Select an item by - Panasonic PTL200U | PTL200U User Guide - Page 33
does in normal projection mode. # Select SHUTTER from the MAIN MENU screen and then press the ENTER button. $ Press any button on either the projector or remote control unit to return to normal operating mode. Changing the display language # Select LANGUAGE from the MAIN MENU screen and then press - Panasonic PTL200U | PTL200U User Guide - Page 34
Adjusting the picture Use the F and G buttons to select an item, and then use the I and H buttons to change the setting for that item. For items with bar scales, press the ENTER button or the I or H buttons to display the adjustment screen, and then use the I or H buttons to make the adjustment. - Panasonic PTL200U | PTL200U User Guide - Page 35
Basic Operation TINT (NTSC/NTSC 4.43/YPBPR /SD CARD only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish. SHARPNESS Press the H button to make the picture details sharper, and press the I - Panasonic PTL200U | PTL200U User Guide - Page 36
the type of signal which is currently being projected. Refer to the table on page 61 for details on each type of signal. GAMMA ADJUST (PT-L300U only) Press the ENTER button to display the GAMMA ADJUST menu. ɹɹɹɹɹG A M M A A D J - Panasonic PTL200U | PTL200U User Guide - Page 37
G button to select "PICTURE MODE", and then use the I or H button to select "NATURAL". $ Press the NORMAL button on the remote control unit. % Select the LAMP POWER item in the OPTION menu by pressing the F or G buttons and set to "HIGH" by pressing the I or H buttons. NOTE: B sRGB is only enabled - Panasonic PTL200U | PTL200U User Guide - Page 38
Adjusting the position When the input signal is from a PC, first select AUTO SETUP and then press the ENTER button to initiate automatic positioning. If the optimum setting is not obtained when AUTO SETUP is carried out, adjust by the following procedure. Use the F and G buttons to select an item, - Panasonic PTL200U | PTL200U User Guide - Page 39
ASPECT Refer page 30. AUTO SETUP (PC only) HORIZONTAL POSITION, VERTICAL POSITION, DOT CLOCK and CLOCK PHASE are matched to the input signal and are automatically adjusted. NOTE: B When the ASPECT is set to V- SCROLL (page 30), AUTO SETUP cannot be performed. Basic Operation Advanced Operation - Panasonic PTL200U | PTL200U User Guide - Page 40
at high 40 elevations (above 1 400 m), set FAN CONTROL to "HIGH". LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. The LOW position is - Panasonic PTL200U | PTL200U User Guide - Page 41
such as MDs (mini discs), CDs (compact discs) and cassette tapes. In addition, it allows data to be repeatedly recorded, played and erased. The projector can be used to play computer image files, video images (still pictures) and moving pictures using the SD memory card. Record: Still image data - Panasonic PTL200U | PTL200U User Guide - Page 42
is facing the correct way. # Open the slot cover at the side of the projector. Removing the SD memory card # Open the slot cover. $ Check that the slot is not flashing (the SD memory card is not being accessed). Access lamp $ Insert the SD memory card as shown in the illustration below. Insert the - Panasonic PTL200U | PTL200U User Guide - Page 43
About the SD menu The still image data and moving image data that is stored on SD memory cards can be played back using the SD menu. Displaying the SD menu Press the SD button to change the display to the SD CARD screen. PICTURE SLIDE SHOW VIDEO PICTURE (page 44) This lets you play back still - Panasonic PTL200U | PTL200U User Guide - Page 44
Playing back still images The PICTURE option lets you play back still image data. # Use the F and G buttons to select "PICTURE", and then press the ENTER button. % Use the F, G, I and H buttons to select the still image to be enlarged, and then press the ENTER button. PICTURE SLIDE SHOW VIDEO - Panasonic PTL200U | PTL200U User Guide - Page 45
SETTING (page 46) This lets you set whether the slide playback is to be automatically continuous (automatic playback) or whether it can be switched manually (manual playback), and also lets you edit the user settings for "USER". USER If the user selects the desired still images, the still images - Panasonic PTL200U | PTL200U User Guide - Page 46
SETTING SETTING1 AUTO MODE MANUAL MODE USER SET NEW USER SET If adding settings for a new between playback of each still image. * Once you have made the required settings, press the ENTER button. MANUAL MODE During slide playback, press the I button to play back the next still image, and press the - Panasonic PTL200U | PTL200U User Guide - Page 47
Editing user settings You can use the user setting edit screen that is displayed when you select "SETTING" during slide playback on the previous page to add, move and delete still images from the list of images for slide playback and also to change playback settings. % Use the F, G, I and H buttons - Panasonic PTL200U | PTL200U User Guide - Page 48
you correct the position of sideways images during playback. * Once you have made the required settings, press the ENTER button. NOTE: B If no setting value for the playback interval is displayed, the still images 48 USER FILE 0 100-0001 CANCEL "USER FILE" This deletes the user settings that are - Panasonic PTL200U | PTL200U User Guide - Page 49
B Images containing fast movement may appear to pause momentarily (frame dropout) or they may appear as mosaic patterns, but this is normal. B If the projector has been used to enlarge the images, some movie data may appear lower in resolution, but this is normal. B During fast-forward playback and - Panasonic PTL200U | PTL200U User Guide - Page 50
image, it means that only the thumbnail data cannot be found. B An error occurred during an operation. If the problem cannot be reset by pressing the SD MENU button, turn off the projector's power while referring to "Turning off the power" on page 23, and then turn the power back on again - Panasonic PTL200U | PTL200U User Guide - Page 51
for the cause of the problem. TEMP indicator Indicator Illuminated (red) display (Lamp unit on) The surrounding temperature or the temperature inside the projector has become unusually Problem high. Flashing (red) (Lamp unit on) The temperature inside the projector has become dangerously high, or - Panasonic PTL200U | PTL200U User Guide - Page 52
indicator Indicator display Illuminated (red) It is nearly time to Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector is turned on? B The power may have been turned - Panasonic PTL200U | PTL200U User Guide - Page 53
installed, dust and other foreign particles will be drawn into the projector, and malfunctions will result. B If the dust cannot be removed by cleaning, it is time to replace the air filter. Please consult your dealer. Furthermore, if the lamp unit is being replaced, replace the air filter at this - Panasonic PTL200U | PTL200U User Guide - Page 54
sure that your hands are not slippery when using the screwdriver. NOTE: B The projector is not supplied with a replacement lamp unit. Please ask your dealer for details. Lamp unit product no.: ET-LAE100 CAUTION: B Do not use any lamp unit other than the one with the product number indicated above - Panasonic PTL200U | PTL200U User Guide - Page 55
screws until the screws turn freely. Then hold the handle of the lamp unit and gently pull it out from the projector. Lamp unit fixing screws Handle Lamp unit cover fixing screws & Insert the new lamp unit while making sure that the direction of insertion is correct, and then use a Phillips - Panasonic PTL200U | PTL200U User Guide - Page 56
press the MAIN POWER switch. NOTE: B If the POWER button on the projector does not illuminate red when the MAIN POWER switch is turned on, turn the MAIN POWER switch off again and check that the lamp unit and the lamp unit cover are securely installed. Then turn the MAIN POWER switch back - Panasonic PTL200U | PTL200U User Guide - Page 57
service Before asking for service, check the following points. Problem page 51.) B LAMP indicator is illuminated or flashing. (Refer to page 52.) B The lamp unit cover has not heard. B The input source which is connected to the projector may not be adjusted correctly. B The audio signal source - Panasonic PTL200U | PTL200U User Guide - Page 58
B The signal format (TV system) may not be set correctly. (Refer to page 35.) B There may be a problem with the video tape or other signal source. B A signal which is not compatible with the projector may be being input. (Refer to page 61.) Picture from B The cable may be too long. computer - Panasonic PTL200U | PTL200U User Guide - Page 59
LCD panels (RGB) Drive method: Active matrix method Pixels: PT-L300U: 518 400 (960 x 540) x 3 panels PT-L200U: 415 272 (858 x 484) x 3 panels Lens: Manual zoom (1 - 1.2) / focus lens F 2.0 - 2.3, f 22.0 mm - 26.2 mm Lamp: UHM lamp (120 W) Luminosity: PT-L300U: 800 lm (ANSI) PT - Panasonic PTL200U | PTL200U User Guide - Page 60
COMPONENT IN: Y: PB,PR (CB,CR): DVI-D IN (PT-L300U only): AUDIO IN: SD memory card slot: Cabinet: Dimensions: Width: Height: Length: PT-L300U PT-L200U Weight: Operating environment: Temperature: Humidity: Certifications: Power supply: Operating range: Weight: Dimensions: Width: - Panasonic PTL200U | PTL200U User Guide - Page 61
Appendix List of compatible signals Mode Display resolution (dots)*1 NTSC/M-NTSC/PAL-M/PAL60 720 x 480i PAL/PAL-N/SECAM 720 x 576i 525i 720 x 480i 625i 720 x 576i 525p 720 x 483 HDTV60 1 920 x 1 080i HDTV50 1 920 x 1 080i 750P 1 280 x 720 VGA400 640 x 400 640 x 400 VGA480 640 x - Panasonic PTL200U | PTL200U User Guide - Page 62
view Pin No. # $ % . / 0 1 Signal R G/G·SYNC B SDA HD/SYNC VD SCL Pin + is spare. Pins &-*, , and - are for earth. Pins . and 1 functions are only valid when supported by the computer 62 - Panasonic PTL200U | PTL200U User Guide - Page 63
B The pin assignments on the DVI-D input connector are as follows (interface with TMDS connector on a personal computer) : 2 3 + * # View from mating side Pin No. Signal # T.M.D.S data 2- $ T T.M.D.S data 2+ % T.M.D.S data 2/4 shield & T.M.D.S data 4- ' T.M.D.S data 4+ ( DDC clock ) - Panasonic PTL200U | PTL200U User Guide - Page 64
(folder number) cannot be created. B For example, if two folders exist named "100abcde" and "100fghij" respectively, the projector will not recognise them. Folder sub-hierarchies are not supported. B For example, if a folder called "323fghij" is created as a sub-folder of the "102abcde" folder, the - Panasonic PTL200U | PTL200U User Guide - Page 65
Dimensions 269(10-9/16) PT-L300U: 279.7(11) PT-L200U: 278.5(10 15/16) 49.7(1 15/16) 85.2(3-11/32) 80.2(3-5/32) 65.4(2 9/16) 280(11) Trademark acknowledgements B The SD logo is a trademark. B VGA - Panasonic PTL200U | PTL200U User Guide - Page 66
NE PAS EXPOSER CE PRODUIT À L'EAU OU À L'HUMIDITÉ Alimentation: Ce projecteur LCD est conçu pour fonctionner sur secteur de 100 V - 240 V, 50 Hz/60 exclamation dans un triangle avertit l'usager de la présence d'instructions importantes concernant l'utilisation et l'entretien (réparation) dans la - Panasonic PTL200U | PTL200U User Guide - Page 67
, éteindre le projecteur si on le laisse sans surveillance. Ne pas installer ce projecteur dans un endroit qui n'est pas assez résistant pour supporter le poids du projecteur. B Si l'emplacement d'installation n'est pas assez résistant, le projecteur risque de tomber et causer de graves blessures et - Panasonic PTL200U | PTL200U User Guide - Page 68
présentes à l'intérieur du projecteur. B Pour toute inspection, réglage ou réparation, s'adresser à un centre technique agréé. Nettoyer la fiche du cordon d'alimentation régulièrement afin d'éviter toute accumulation de poussière. B Si de la poussière s'accumule sur la fiche du cordon d'alimentation - Panasonic PTL200U | PTL200U User Guide - Page 69
ès de cette sortie d'air, sinon cela peut causer des blessures ou des dommages. Le remplacement de l'unité de lampe ne devrait être effectué que par un technicien qualifié. B L'unité de lampe a une pression interne élevée. Elle peut facilement s'endommager si cognée contre des objets durs ou si elle - Panasonic PTL200U | PTL200U User Guide - Page 70
Débrancher toujours tous les câbles avant de déplacer le projecteur. B Le fait de déplacer le projecteur avec des câbles branchés peut endommager les câbles, ce qui pourraient causer un incendie ou des chocs électriques. Ne pas placer d'objets lourds sur le projecteur. B Cela peut déséquilibrer le - Panasonic PTL200U | PTL200U User Guide - Page 71
, des anomalies pourront se produire. Notes sur l'utilisation Afin d'obtenir la meilleure qualité d'image Si la lumière extérieure ou la lumière des lampes intérieures brille sur l'écran, les images projetées n'auront pas un bon contraste. Tirer les rideaux ou les stores de toutes les fenêtres - Panasonic PTL200U | PTL200U User Guide - Page 72
la lampe Il est possible qu'il faille remplacer la lampe plus tôt en raison de facteurs variables tels que des caractéristiques de la lampe, des , verts ou rouges. Bien noter que ceci n'affecte pas le fonctionnement du LCD. Avant de faire le nettoyage et l'entretien, s'assurer de débrancher la fiche - Panasonic PTL200U | PTL200U User Guide - Page 73
é, car il contient du gaz sous haute pression et peut facilement s'endommager s'il est cogné contre des objets durs ou s'il tombe. B La lampe produisant la lumière est en verre; elle risque donc d'éclater si on la laisse tomber ou si elle heurte des objets durs. Faire bien - Panasonic PTL200U | PTL200U User Guide - Page 74
la méthode donnée ce que les vis tournent librement. dans "Mise hors circuit de Tenir la poignée du bloc de l'alimentation" à la page 23, lampe et tirer doucement pour le puis débrancher la fiche du sortir du projecteur. cordon d'alimentation de la prise de courant et vérifier que Vis de - Panasonic PTL200U | PTL200U User Guide - Page 75
SÉL. VALID EXIT + Appuyer sur la touche d'entrée (ENTER) pour afficher le menu OPTION, puis utiliser les touches F et G pour sélectionner DURÉE LAMPE. OPTION INFO ÉCRAN OUI NR OUI FORMAT MODE 4:3 COULEUR FOND NOIR 4:3 H.POS CENTRE INSTALLATION FAÇADE SOL/PLAFOND SOL VENTILATEUR NORMAL - Panasonic PTL200U | PTL200U User Guide - Page 76
& Television Systems Company Division of Matsushita Electric Corporation of America One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 392-4443 3330 Cahuenga Blvd West Los Angels, CA 90068 (323) 436-3500 Technical Support: (800) 524-1448 (800) 526-6610 FAX: (201) 392-6514 E-Mail: pbtssupport
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
LCD Projector
Operating Instructions
Model No.
PT-L300U
PT-L200U
R
TQBJ 0120-1
Before operating this product, please read the instructions carefully and save this
manual for future use.