Panasonic PVGS70D PVGS70D User Guide - Page 21
USING THE VIEWFINDER, USING THE LCD MONITOR, Adjusting Brightness and Color Level
View all Panasonic PVGS70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1 21 1, 2 2 PUSH OPEN OFF ON MODE 3 3 180x CNOIGLOHRT STILL VIEW TSIEMLEFR MTAECLREO SSOKFINT 4 90x TSIEMLEFR MTAECLREO LCD/EVF SET LCD BRIGHTNESS LOW||||----HIGH LCD COLOR LEVEL LOW||||----HIGH EVF BRIGHTNESS LOW||||----HIGH PUSH MENU TO RETURN Using the Viewfinder Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read. 1 Tilt up the Viewfinder. ≥The Viewfinder can also be pulled out for use. ≥Do not pull on the Eyecup to extend the Viewfinder. 2 Adjust the Viewfinder by sliding the Eyepiece Corrector Knob 1. Using the LCD Monitor With the LCD Monitor open, you can also record the picture while watching it. 1 Set the [OFF/ON/MODE] Switch to [ON]. 2 Press the [PUSH OPEN] Button 2 and, at the same time, bring out the LCD Monitor about 90x in the direction of the arrow. ≥The Viewfinder goes off. 3 Adjust the LCD Monitor angle according to the desired recording angle. ≥The LCD Monitor can rotate a maximum of 180x 3 from the vertical position to the upward direction and a maximum of 90x 4 to the downward direction. Forcefully rotating the LCD monitor beyond these ranges will damage the Palmcorder. Closing the LCD monitor Push the LCD Monitor until it is securely locked. ≥Make sure the Card Slot Cover is closed. ª Adjusting Brightness and Color Level When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES], the following items are displayed: LCD Brightness [LCD BRIGHTNESS] Adjusts the brightness of the image on the LCD screen. LCD Color Level [LCD COLOR LEVEL] Adjusts the color saturation of the image on the LCD screen. Brightness of the Viewfinder [EVF BRIGHTNESS] Adjust the brightness of the image in the Viewfinder. 1 Press the [PUSH] Dial and select the item you want to adjust. 2 Rotate the [PUSH] Dial and increase or decrease the number of the vertical bars on the Bar Indication. ≥The Bar Indication has 8 steps. A larger number of vertical bars indicates stronger brightness or color saturation. Increasing the Brightness of the Entire LCD Monitor Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT]. To change the Picture Quality of the LCD Monitor Set the [LCD AI] on the [DISPLAY SETUP] Sub-Menu to [ON] or [OFF]. [ON]: The screen image becomes clear and vivid. (The effect varies according to the recording scene.) ≥These adjustments do not affect the recorded images. ≥For other notes, see page 96. 21