Panasonic SABT300 Blu-ray Disc Home Theater Sound System - Page 12

Getting started Connections to a Set Top Box, etc. Use the following connections when you want to output the original surround audio from your Set Top Box, cable TV, VCR, DVD recorder, etc. through this unit's speakers. ≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not be displayed properly. ≥Turn off all equipment before connection. STB, VCR, DVD recorder, etc. TV Refer to the operating instructions of the respective devices for the optimal connections. OPTICAL OUT Optical digital audio cable (not included) SPEAKERS R AUX(TV) L OPTICAL 2(STB) AC IN ( 6 5 21 4387 3Ω SUB- 3Ω R 3Ω L R 3Ω L R 3Ω L WOOFER CENTER FRONT SURROUND SURROUND BACK + Y PB OPTICAL ) AV OUT PR 2(STB) 1(TV) VIDEO COMPONENT OUT VIDEO OUT DIGITAL IN 75Ω FM ANT LOOP EXT AM ANT LOOP ANT GND PUSH DIGITAL TRADNIGSIMTAITLTER TRANSMITTER PUSH Main unit TIPS ≥This unit can decode the surround signal from the Set Top Box (Satellite receiver, Cable box, etc.). Press [EXT-IN] several times to select "D-IN 2" (DIGITAL IN 2*). * "(CABLE/SAT)" is displayed next to DIGITAL IN 2 when set for CABLE/SAT AUDIO input. (> 28, Setting the TV audio for VIERA Link "HDAVI Control") ≥For connections between this unit and the TV, refer to "TV connections". (> 10, 11) ≥If you have various sound sources and this unit's terminals are not sufficient, connect them to the available inputs on the TV and the TV output should then be connected to the "AUX(TV)" or "OPTICAL 1(TV)" terminal of the main unit. Refer to the operating instructions of the TV, video cassette recorder, DVD recorder or Set Top Box for settings to output its audio via AUDIO OUT or OPTICAL OUT terminal of the TV. - In some cases the audio signal will only be output as 2ch audio from the TV. In this case, connect the Set Top Box (Satellite receiver, Cable box, etc.) that will be used most commonly with multi-channel audio to this unit's "OPTICAL IN 2(STB)" terminal. RQT9508 12