Panasonic SAHT640 SAHT640 User Guide - Page 8
Step 6 Preparing The Remote Control, Step 7 Performing Quick Setup
View all Panasonic SAHT640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Simple Setup Preparing the remote control / Performing QUICK SETUP 6 STEP Preparing the remote control Remote control Batteries 2 Insert so the poles (i and j) match those in the remote control. 3 R6/LR6, AA 1 ≥ Do not use rechargeable type batteries. Do not: ≥ mix old and new batteries. ≥ use different types at the same time. ≥ heat or expose to flame. ≥ take apart or short circuit. ≥ attempt to recharge alkaline or manganese batteries. ≥ use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control. Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. ∫ Use Aim at the display (➜ page 9), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. 7 STEP Performing QUICK SETUP The QUICK SETUP screen assists you to make necessary settings. To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.). ≥ To change your television's video input mode, refer to its operating instructions. ≥ This remote control can perform some basic television operations (➜ page 28). 1 2 3 4 5 6 Select Turn on the Select unit. "DVD/CD". Press and hold to show the QUICK SETUP screen. To change these settings later Select "QUICK SETUP" in the "Others" tab (➜ page 22). Register Follow the messages and make the settings. ENTER Press to finish QUICK SETUP. Press and hold to exit. RQT8611 8