Panasonic SAHT730 Dvd Theater Receiver - Page 27

Changing the player settings TV Type Select to suit the type of television. Time Delay When connected with a Plasma display, adjust if you notice the audio is out of sync with the video. Still Mode Specify the type of picture shown when paused. Black Level Control Change the black level of the picture if you connected a television through the COMPONENT VIDEO OUT terminals. ∫ "Audio" tab Dynamic Range Compression Speaker Settings (➜ below) Set the delay time for your center and surround speakers. ≥Standard (Direct View TV) ≥Projection TV ≥0ms ≥ 20ms ≥CRT Projector ≥Plasma TV ≥ 40ms ≥ 60ms ≥LCD TV/Projector ≥ 80ms ≥ 100ms ≥Automatic ≥Field: The picture is not blurred, but picture quality is lower. ≥Frame: Overall quality is high, but the picture may appear blurred. ≥Lighter: When connected through VIDEO OUT or S-VIDEO OUT. ≥Darker: When connected through COMPONENT VIDEO OUT (Y/PB/PR). ≥Off ≥On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital) ≥Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms ≥Surround (L/R): 0.0/5.0/10.0/15.0 ms ∫ "Display" tab Menu Language On-Screen Messages ≥ English ≥On ≥ Français ≥ Off ≥ Español ∫ "Others" tab FL Dimmer Changes the brightness of the unit's display (and Jog LED [HT930] [HT933]). QUICK SETUP Re-initialize Setting This returns all values in the Setup menus to the default settings. ≥Bright ≥Dim ([HT930] [HT933] Jog LED turns off.) ≥Auto: The display is dimmed, but brightens when you perform some operations. ([HT930] [HT933] Jog LED turns on when you perform some operations.) ≥Yes ≥ No ≥Yes: The password screen is shown if "Ratings" (➜ page 26) is set. Please enter the same password. After "INIT" on the display disappears, turn the unit off and on again. ≥No Changing the delay time (Speaker Settings) (Effective when playing multi-channel audio) (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference. C : Actual speakers position L C R : Ideal speakers position ac a b c : Primary listening distance SW b LS LS RS Approximate room dimensions RS 1 Press [3, 4] to select the delay time box and press [ENTER]. 2 Press [3, 4] to adjust the delay time and press [ENTER]. Center delay time L ms C R 0.0 Exit Exit SW LS ms 0.0 RS Surround delay time Circle of constant primary listening distance If either distance a or b is less than c, find the difference in the table and change to the recommended setting. a Center speaker b Surround speaker Difference (Approx.) Setting Difference (Approx.) Setting 30 cm (1 foot) 1.0 ms 150 cm (5 feet) 5.0 ms 60 cm (2 feet) 2.0 ms 300 cm (10 feet) 10.0 ms 90 cm (3 feet) 3.0 ms 450 cm (15 feet) 15.0 ms 120 cm (4 feet) 150 cm (5 feet) 4.0 ms 5.0 ms To finish the speaker setting Press [2] to select "Exit" and press [ENTER]. When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic II. e.g., the settings for MUSIC are the same as those for Dolby Digital. Dolby Digital Dolby Pro Logic II MUSIC MOVIE 0 ms 0 ms 10 ms 5 ms 5 ms 15 ms 10 ms 10 ms 20 ms 15 ms 15 ms 25 ms RQT7972 27