Panasonic SAHT740 SAHT740 User Guide - Page 29

Enhancing the bass sound: H.BASS H.BASS Adjusting the volume of each TEST speaker: Speaker level adjustments You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. The unit automatically selects the most suitable setting according to the type of playback source. Press [H.BASS]. ST SRD E. HDCD H.BASS W PGM 1 ≥ [DVD-V] [DVD-VR] H.BASS ON (factory preset),------.H.BASS OFF ≥ When another source is selected H.BASS OFF (factory preset),------.H.BASS ON The setting you make is retained, and recalled every time you play from the same type of source. Adjusting the amount of bass: Subwoofer level SUB WOOFER LEVEL You can adjust the amount of bass. The unit automatically selects the most suitable setting according to the type of playback source. Press [SUB WOOFER LEVEL]. ≥ [DVD-V] [DVD-VR] SUB W 4 (factory preset)§#SUB W 1#SUB W 2# SUB W 3 ≥ When another source is selected SUB W 2 (factory preset)§#SUB W 3#SUB W 4# SUB W 1 ≥ To check the current setting, press [SUB WOOFER LEVEL]. ≥ The setting you make is retained, and recalled every time you play the same type of source, except when Sound Field Control (MOVIE, SPORT or MUSIC) is turned on. § When Sound Field Control (MOVIE, SPORT or MUSIC) is on, the factory presets are as follows: - MOVIE: SUB W 4 - SPORT: SUB W 2 - MUSIC: SUB W 1 This is one of the ways to get appropriate surround effects. Preparation Press [DVD]. 1 While stopped and no on-screen display is shown Press [TEST] to output a test signal. ≥ To stop the test signal, press [TEST] again. L: Front left RS: Right surround C: Center LS: Left surround R: Front right ≥ There is no output from SW (subwoofer) channel. 2 Press [VOLUME, r] or [s] to set the volume level normally used for listening. 3 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. ≥ Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB ∫ To adjust speaker level during play (Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on, and Surround Music is off.) 1 Press [CH SELECT] to select the speaker. L #C #R #RS #LS #SW SW: Subwoofer ≥ You can adjust SW only if the disc includes a subwoofer channel. ≥ "SW" does not appear on the display and is not adjustable when "ÎPLII" is lit. ≥ "S" appears on the display when "MOVIE", "SPORT" or "MUSIC" is selected with Sound Field Control (➜ page 28). In this case, you can adjust both surround speaker levels at the same time using [3, 4]. S: `6 dB to i6 dB 2 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS, SW: `6 dB to i6 dB (L, R: Only the balance is adjustable.) ≥ To adjust the balance of the front speakers, while "L" or "R" is selected, press [2, 1]. . Using sound effects RQT8582 29