Panasonic SAHT740 SAHT740 User Guide - Page 4

Simple Setup 1 STEP Assembling the front speakers The supplied stands are specially designed for attachment to Panasonic SB-FS740 or SB-FS940 front speakers. Use only as indicated in this setup. Preparation ≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥ For assembly, use a Phillips-head screwdriver. ≥ Make sure you have all the indicated components before starting assembly, setup, and connection. ≥ There is no difference between the right and left speakers and stands. ≥ For optional wall mount, refer to page 6. [HT740] [HT743] 2 Front speakers (with cover plate) 2 Stands (with cable) 2 Bases 8 Screws Assembling the front speakers 1 Attach the stand to the base. 1 Thread the speaker cable through the base. For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base. Cable 3 Attach the speaker to the stand. 1 Pull out the end of the speaker cable and position it between the ridges. Ridges Cable Base 2 Attach the stand to the base while gently pulling on the end of the speaker cable. Stand 2 Attach the speaker to the stand. Speaker Cover plate Remove before attaching the speaker and keep for wall-mount use (➜ page 6). Stand Base Cable Pull gently. Stand 4 Secure the speaker to the stand. Speaker Stand Screw Tighten securely. Ensure the speaker cable is centered in the groove. 2 Secure the stand to the base. Screw Tighten securely. Stand 5 Connect the speaker cable. _: White `: Blue Insert the wire fully. Push! Base RQT8582 Screws 4 Tighten securely. Slide the speaker cable into the groove. Press the speaker cable into the groove.