Panasonic SAHT822V SAHT822V User Guide - Page 15

For better video from DVD The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the television to view video from the VHS section (➜ page 14). You may need to change the video-input mode on the television to view video from the VHS and DVD sections. Read your television's operating instructions for details. ∫ Connecting a television with COMPONENT VIDEO IN terminals Main unit A RF IN RF OUT 75 LOOP ANT LOOP GND EXT DVD Y FM ANT PB/CB AM PR/CR ANT DVD/ VHS VIDEO OUT EXT VIDEO IN L R COMPONENT S-VIDEO LINE VIDEO OUT OUT OUT LINE IN COMPONENT VIDEO OUT terminals These terminals can be used for either interlace or progressive output and provide a purer picture than the S-VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/CB, PR/CR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. ≥The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color. ≥After making this connection, change the black level for a better picture (➜ page 30, Video-Black Level Control). To television (➜ page 14) Video cables (not included) To enjoy progressive video ≥Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.) ≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television. Television (not included) Y PB PR COMPONENT VIDEO IN ∫ Connecting a television with an S-VIDEO IN terminal Main unit A RF IN RF OUT 75 LOOP ANT LOOP GND EXT DVD Y FM ANT PB/CB AM PR/CR ANT DVD/ VHS VIDEO OUT EXT VIDEO IN L R COMPONENT S-VIDEO LINE VIDEO OUT OUT OUT LINE IN S-VIDEO OUT terminal The S-video terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.) [Note] Connect to a different terminal group than that you used for the video cable (e.g., "VIDEO 2"). Picture from this unit's VHS will not appear when you use the same group input terminal connections because the S-video terminal input takes precedence. To television (➜ page 14) Television (not included) S-video cable (not included) S-VIDEO IN RQT7708 15