Panasonic SAHT822V SAHT822V User Guide - Page 43

Refer to the remote control illustration on page 40. On-screen display To see these displays, set the OSD item in the OPTION menu to ON. Press [OSD/DISPLAY]. The time and operation details appear on the screen for about 5 seconds. 1 23 45 CH 1 STEREO L R 0:00.22 1 SP 1 6 7 STANDARD 8 1 Channel display Displays the cable television channel or television channel currently being received. 2 STEREO/SAP indication Indicates when a program is broadcast in stereo or SAP. ➜ right for audio type details. 3 L and R indicators The Left (L) and Right (R) indicators show which sound mode is selected as follows: Stereo: Both the L and R indicators appear. L: The L indicator appears. R: The R indicator appears. Normal: Neither the L and R indicator appears. 4 Tape running display Shows operations taking place. 5 Shows the time and tape counter Press [OSD/DISPLAY]. The display changes as follows. Present time>Tape counter>Remaining tape time b Using index search: "S 01" to "S 20" is displayed. Using jet rewind: "J.REW" is displayed. ≥Press [SHIFT]i[RESET] to reset the tape counter (elapsed time) to "0:00.00". ≥The remaining time is approximate. It will be incorrect if you set the wrong tape time in the TAPE SELECT item in the OPTION menu and if the tape is of poor quality. 6 Cassette in indicator Shows whether you have loaded a cassette. 7 Tape speed indicator (➜ page 34) 8 Picture mode indicator (➜ page 33) [Note] ≥These displays do not appear when paused or during slow play. ≥The on-screen display may be disturbed depending on the playback tape or the input signal. [Remember] Press [VHS] first. Changing audio When a stereo and/or SAP broadcast is received, "STEREO" and/or "SAP" appear showing the type of broadcast. To change the audio Press [SHIFT]i[AUDIO]. The audio changes as follows: ≥When playing a tape: LR>L>R>Monaural audio track b ≥While watching the television: LR>L>R ^"""-"b The table below shows the TV broadcast type, "MTS" settings, and audio recording patterns. TV broadcast MTS setting Mono Stereo Mono and SAP Stereo and SAP MAIN or SAP MAIN or SAP MAIN SAP MAIN SAP Normal (Mono) Mono LiR (Mixed) Mono Mono LiR (Mixed) LiR (Mixed) Audio track Hi-Fi Left Right Mono Mono Left Mono Mono Left LiR (Mixed) Right Mono SAP Right SAP Be sure that "MTS" is set to "MAIN" or "SAP" to record on the Hi-Fi audio tracks. [Note] ≥Switch to "MONO" for viewing or recording if a stereo or SAP broadcast is impaired by poor reception. ≥To resume stereophonic recording, set "MTS" to "MAIN" or "SAP". Auto bilingual choice function When you play back recordings of stereo or SAP broadcasts, these audio types are automatically selected. The unit may select a different type if you start play midway through the program. Press [SHIFT]i[AUDIO] to change the type if this occurs. This function does not work if: -The tape was recorded on a deck without this system. -The tape is a recording from external equipment. RQT7708 43