Panasonic SAHT822V SAHT822V User Guide - Page 53
Picture incorrect, Progressive video, Sound incorrect, Listening to the radio, Recording, video tape.
View all Panasonic SAHT822V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Picture incorrect Picture distorted. ≥Ensure that the unit is connected directly to the television, and is not connected through an 14 A/V selector or other equipment. The television may display ≥The unit and television are using different video systems. Use a multi-system or NTSC television. - incorrectly or colors appear faded. ≥The system used on the disc doesn't match your television. PAL discs cannot be played. - This unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function properly. The picture on the television ≥Mobile telephone chargers can cause some disturbance. - disappears or stripes appear on ≥If you are using a TV indoor antenna, change to an outdoor antenna. - the screen. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the - television from the unit. Disc picture incorrect Picture size doesn't fit the screen. ≥Change "TV Aspect" in "Video" tab. 30 ≥Use the television to change the aspect. If your television does not have that function, 29 change "4:3 Aspect" in Display Menu. ≥Change the Zoom setting. 22 Menus not displayed correctly. ≥Restore the zoom ratio to a1.00. 22 ≥Set "Subtitle Position" in Display Menu to "0". 29 ≥Set "4:3 Aspect" in Display Menu to "Normal". 29 Auto zoom function does not work ≥Turn off TV's zoom function. - well. ≥Use the other preset aspect ratios or manual adjustment. 22 ≥Zoom function may not work well, especially in dark scenes and may not work depending - on the type of disc. VHS picture incorrect The picture is noisy or is in black ≥Adjust the tracking. 33 and white. ≥Make sure the television's input setting is correct. - Horizontal bars or lines run down ≥The video heads are dirty: clean them with a head-cleaning cassette. 54 the screen. ≥The video heads are worn: consult your dealer. - ≥The tape is old or damaged. - ≥You cannot correctly play tapes recorded with other systems (e.g., PAL). - Picture is distorted when stilled or ≥Some distortion is normal with tapes recorded using VP mode. - during slow-motion. The blue back appears during play. ≥You are playing a blank or poor quality part of the tape. - ≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue - back to appear. Consult your dealer. The picture jiggles. ≥Adjust the vertical hold. 33 Progressive video There is ghosting when progressive output is on. Pictures not in progressive output. Closed captions not displayed. ≥Change "Video Output Mode" in Picture Menu to "480I". This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. ≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be interlace. ≥Press [SHIFT]i[PROGRESSIVE]. Or select "480P" in "Video Output Mode" in Picture Menu. ≥When progressive output is on, closed captions will not be displayed. 29 - 20, 29 - Sound incorrect Sound distorted. Effects do not work. Humming heard during play. There is noise when playing a video tape. ≥Noise may occur when playing WMA files. - ≥Some audio effects do not work or have less effect with some discs. - ≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed. - ≥When connected with headphones, only Sound Field Control is effective. - ≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances - and cords away from the subwoofer. ≥Adjust the tracking. 33 ≥The tape is old or damaged. - Listening to the radio Noise is heard. ≥Adjust the position of the FM or AM antenna. - "ST" flickers or doesn't light. ≥Use an outdoor antenna. 45 Sound is distorted. A beat sound is heard. ≥Turn the television off or separate it from the unit. - A low hum is heard during AM broadcasts. ≥Separate the antenna from other cables. - Recording " " flashes when I try to start ≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 5 recording. Cannot record. Timer recording doesn't record a ≥Check the clock and calendar. - program correctly. ≥Set the channel and start and end times correctly. - ≥Be sure to press [F] after programming to put the unit in timer recording standby. 36 ≥Program times may be overlapped. - Cannot record from other ≥Press [W CH] or [X CH] to select "AU". 35 equipment. ≥Check the connections to the other equipment. 35 Black bands appear in the recording. ≥Move the other equipment away from the television as it may be picking up interference. - The copy of a videotape or DVD is ≥This unit complies with industry standards regarding the recording and duplication of copy- - very poor. protected material. This includes commercial videotapes and DVDs. Consequently, copying not only infringes copyright laws but also presents serious technical difficulties. Even in cases where a copy can be made, the quality will be very poor. RQT7708 53