Panasonic SAHT930 Dvd Theater Receiver - Page 8

Front speaker assembly Other speaker setup options ∫ Attaching to a wall You can attach all of the speakers to a wall. 1 Drive a screw (not included) into the wall. 2 Fit the speaker securely onto the screw(s) with the hole(s). 30-35 mm (13/16q - 13/8q) ‰3.0-4.0 mm (1/8q - 5/32q) Wall or pillar ‰7.5-9.4 mm (19/64q - 3/8q) 4.0-7.0 mm (5/32q - 9/32q) ≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. ≥Use of optional speaker cables is recommended for wall-mounted front speakers. (You can also remove the speaker cables from the pipes supplied with this system). ≥[HT930] [HT933] When mounting the front speakers to a wall, we recommend using a string (not included) to prevent it from falling (➜ page 7). e.g. Surround speaker [HT730] Front speaker [HT930] Center speaker [HT730] [HT733] [HT930] Front speaker [HT933] 366 mm (1413/32z) 180 mm (73/32z) 230 mm (91/16z) 175 mm (67/8z) Center speaker [HT933] In this position, the speaker will likely fall if moved to the left or right. Move the speaker so that the screw is in this position. ∫ Fitting speaker stands (not included) (Except Front speakers) Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram. ≥The stands must be able to support over 10 kg (22 lbs). ≥The stands must be stable even if the speakers are in a high position. e.g. Surround speaker [HT730] 5 mm (3/16q), pitch 0.8 mm (1/32q) 60 mm (23/8q) Attach the stands to these metal screw holes. Speaker stand (not included) Plate thickness plus 7 mm to 10 mm (plus 9/32q to 13/32q) 150 mm (529/32z) RQT7972 8