Panasonic SCBT7399 SABT7399 User Guide
Panasonic SCBT7399 - BLU-RAY HOME THEATER Manual
 |
View all Panasonic SCBT7399 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic SCBT7399 manual content summary:
- Panasonic SCBT7399 | SABT7399 User Guide - Page 1
Easy Setting Guide The order of setting 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 1 Prepare the speakers Step 1 Slide into - Panasonic SCBT7399 | SABT7399 User Guide - Page 2
instructions to the network, you can use the BD-Live and VIERA CAST features. Main unit Main unit's speaker terminals digital audio cable. If your TV does not support the above, use the audio cable. 1 Smart setup starts The on screen display will guide you through the steps.*2 Smart setup Would
-
1 -
2
 |
 |
VQC7399
F1209RE0
1
2
1
2
3
4
SETUP MIC
1
2
3
4
1
FRONT
Lch
→
Easy Setting Guide
The order of setting
Prepare the speakers
Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers
Front speakers
FRONT/AVANT
Center speaker
CENTER/CENTRE
Surround speakers
SURROUND/AMBIOPHONIE
Blu-ray Disc Home Theater Sound System
Model No.
SC-BT330
e.g.,
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Smart setup
See Smart setup screen
Auto speaker setup microphone
(included)
Place the Auto speaker setup
microphone at the actual seating
position. (At ear level when seated.)
Main unit’s front panel
GREEN
GRAY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables
.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Center
speaker
Subwoofer
Step 3
Step 4
Step 1
Step 2
WHITE
White
Blue line
Slide into the
groove.
Tighten securely.
Position the
cable between
the ridges.
Leave about
120 mm (4
23
/
32
)
Tighten securely.
Front speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GRAY
GREEN
PURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!