Panasonic SDR-S70 User Manual - Page 22

Recording 2 Recording (Basic) Recording motion pictures ≥ Open the lens cover before turning the unit on. (l 9) 0h00m00s SP 41J20O 1 Change the mode to and open the LCD monitor. 2 Press the recording start/stop button to start recording. ≥ When you begin recording, ; changes to ¥. ≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed. 3 Press the recording start/stop button again to pause recording. ∫ Screen indications in the motion picture recording mode 0h00m00s SP R 1h20m A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to "0h00m00s". ("h" is an abbreviation for hour, "m" for minute and "s" for second.) 22 VQT3E80 (ENG) ≥ Still pictures can be recorded while recording the motion picture. ≥ The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene. The scene is automatically divided when the recorded data exceeds 1.9 GB. (The recording will continue.) SD CARD Maximum number of recordable scenes: 9801 Maximum number of different dates: 99 (In the case of SD cards it is the maximum number of recordable scenes per card.) Built-in Memory/HDD SDR-T70 / SDR-H100 Maximum number of recordable scenes: 98901 Maximum number of different dates: 999 When either of them reaches to the maximum limit, additional scenes cannot be recorded.