Panasonic TCP42X1 42" Plasma Tv - Page 29

(Continued) How to Use Menu Functions (picture, sound quality, etc.) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only) • Favorite: Only channels registered as FAVORITE (p. 20) Selects the screen menu language (p. 16) Adjusts the clock (p. 17) Sets channels (p. 39) Channel surf mode All Language Clock ANT/Cable setup Selects the terminal and label of the external equipment (p. 41) Prevents "Image retention" with Wobbling. (Automatic/Periodic) Automatic: Shifts the display image automatically. •• Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time (minutes)" menu. Sets the time for "Pixel orbiter-Periodic" setting. (1/2/3/4) Pixel orbiter Automatic Time (minutes) 4 Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only) • The recommended setting is "Bright" to prevent panel "Image retention". (p. 48) Press "OK" to start horizontal "Scrolling" on the screen (p. 48) 4:3 side bars Bright Scrolling bar Controls equipment connected to HDMI terminals (p. 32) (On/Off) • "Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set. Sets "Power on link" of HDMI connection equipment (p. 32) (Yes/No) VIERA Link On Power on link Yes Sets "Power off link" of HDMI connection equipment (p. 32) (Yes/No) Power off link Yes Set "Stand-by power save" of HDMI connection equipment. (p. 32) (No/Yes) Stand-by power save No Set "Auto power stand-by" of HDMI connection equipment. (p. 32) (No/Yes (with reminder)/Yes (no reminder) Auto power stand-by No Selects the default speakers (p. 32) (TV/Theater) Default speakers TV To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed for more than 10 minutes. (Enable/Disable) Note Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel. •• "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned • on for the first time after turning the power off by "No signal for 10 minutes". The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable) Note Not in use when setting "Auto power on" or "On/Off Timer". •• "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on • for the first time after turning the power off by "No activity for 3 hours". The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Turns TV On automatically when the cable box or a connected device is turned On (No/Yes) • The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 42) No signal for 10 minutes Enable No activity for 3 hours Disable Auto power on No Play SD card automatically Set "Thumbnail" or "Slideshow" to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off) Set later Displays TV version and software license. Performing Reset will clear all items set with Setup, such as channel settings. (p. 38) About Reset to defaults Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only) Sets favorite channels. (p. 20) Changes the station identifier. (p. 39) Checks the signal strength if interference or freezing occurs on a digital image. (p. 39) 29 Advanced