Panasonic TCP42X1 42" Plasma Tv - Page 48

Technical Information (Continued) Aspect Ratio: 4:3 H size Size 1 Size 2 The width will be decreased on both sides to reduce noise. Aspect Ratio: FULL/JUST(H-FILL/ZOOM) Size 1 Size 2 The width will be increased on both sides to reduce noise. See pages 26-27 for more information 4:3 side bars Do not display a picture in 4:3 mode for an extended period, as this can cause "Image retention" to remain on either or both sides of the display field. To reduce the risk of such "Image retention", change the brightness of the side bars. See pages 28-29 for more information The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce such flashing (See below). Side Bar 4:3 Screen Display Image retention Scrolling bar Scrolling bar: To prevent "Image retention", scrolls white vertical bar from left to right on a black screen. Press any key except the POWER key to return to previous screen. You will return to the previous screen if no key operation has been performed for 15 minutes. See pages 28-29 for more information [Scrolling bar] Input signals that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR) and HDMI 525 (480) / 60i 525 (480) /60p 750 (720) /60p 1,125 (1,080) /60i 1,125 (1,080)/60p 1,125 (1,080)/60p 1,125(1,080)/24p 1,125(1,080)/24p horizontal frequency (kHz) 15.73 31.47 45.00 33.75 67.43 67.50 26.97 27.00 vertical frequency (Hz) 59.94 59.94 59.94 59.94 59.94 60.00 23.98 24.00 COMPONENT * * * * Note Signals other than those shown above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. HDMI 48