Panasonic TH-42SF1H Operating Manual

Panasonic TH-42SF1H Manual

Get Panasonic TH-42SF1H PDF manuals and user guides View all Panasonic TH-42SF1H manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic TH-42SF1H manual content summary:

  • Panasonic TH-42SF1H | Operating Manual - Page 1
    Operating Instructions Functional Manual FULL HD LCD Display For business use Model No. TH-55SF1HU TH-49SF1HU TH-42SF1HU TH-55SF1HW TH-49SF1HW TH-42SF1HW 55-inch model 49-inch model 42-inch model 55-inch model 49-inch model 42-inch model * T his manual is common to all the models regardless of
  • Panasonic TH-42SF1H | Operating Manual - Page 2
    of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://panasonic.com 2 English Table of Contents Before use ● Illustrations and screens in this Operating Instructions are images for illustration purposes, and may be different from the actual
  • Panasonic TH-42SF1H | Operating Manual - Page 3
    92 Shipping condition 94 Data Cloning 95 Copying the display data to the USB memory 95 Copying the USB memory data to the display 96 Troubleshooting 98 Specifications 101 Software License 104 English 3
  • Panasonic TH-42SF1H | Operating Manual - Page 4
    the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING : To prevent damage which may result in fire or shock hazard, do not expose this
  • Panasonic TH-42SF1H | Operating Manual - Page 5
    the instructions manual, instructions and use only the provided power supply cord. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device. Declaration of Verification Model No. TH-55SF1HU, TH-49SF1HU, TH-42SF1HU
  • Panasonic TH-42SF1H | Operating Manual - Page 6
    prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 3) Do not remove the earthing pin on furniture that can safely support the display. •• Ensuring the display is not overhanging the edge of the supporting furniture. •• Not
  • Panasonic TH-42SF1H | Operating Manual - Page 7
    A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug. Do installing the pedestal, read the operating instructions supplied with it carefully and install and which can support the weight of the unit. •• Dropping or falling of the
  • Panasonic TH-42SF1H | Operating Manual - Page 8
    be sure to check if the mounting location has enough strength to support the weight of the LCD display and the wall hanging bracket for serviceable parts inside. (High-voltage components may cause serious electrical shock.) •• Have the Display checked, adjusted, or repaired at your local Panasonic
  • Panasonic TH-42SF1H | Operating Manual - Page 9
    from this product at all times. CAUTION If problems or malfunction occur, stop using immediately. ■■If problems occur, unplug the power supply plug. •• Smoke or damage to surrounding properties. •• Insert the battery correctly as instructed. (see page 13) Remove the batteries from the remote control
  • Panasonic TH-42SF1H | Operating Manual - Page 10
    the display and the floor surface. If using some other setting-up method (wall-hanging, etc.), follow the manual of it. (If there is no specific indication of installation dimension in the installation manual, leave a space of 10 cm (3 15/16") or more at the top, bottom, left and right, and 5 cm
  • Panasonic TH-42SF1H | Operating Manual - Page 11
    •• Change your password periodically. •• Panasonic Corporation or its affiliate companies will chemical cloth for the panel surface. •• Follow the instructions for the chemical cloth to use it for the electricity and the noise source that may cause problems with an antistatic mat, and re-connect
  • Panasonic TH-42SF1H | Operating Manual - Page 12
    TH-55SF1HU TH-49SF1HU TH-42SF1HU ● 1JP155AF1U Accessories Accessories Supply Check that you have the accessories and items shown Operating Instructions (CD-ROM × 1) TH-55SF1HW TH-49SF1HW TH-42SF1HW from the customer service) ● Dispose the packaging materials appropriately after taking out the items
  • Panasonic TH-42SF1H | Operating Manual - Page 13
    Remote Control Batteries 1. Pull and hold the hook, then open the battery cover. Kensington security The security slot of this unit is compatible with the Kensington security slot. 55-inch model 2. Insert batteries - note correct polarity (+ and -). AAA/R03/UM4 type 3. Replace the cover.
  • Panasonic TH-42SF1H | Operating Manual - Page 14
    at 3 locations using the holes for clampers as shown below. If you need more clampers, purchase them from your dealer. (Available from the customer service) 55-inch model AC cord fixing AC cord (supplied) Plug the connector into the display unit. Plug the connector until it clicks. Note ● Make
  • Panasonic TH-42SF1H | Operating Manual - Page 15
    Video equipment connection PC IN 1 AUDIO1 IN 2 R/PR/CR B/PB/CB G/Y/VIDEO COMPONENT/RGB/VIDEO IN AUDIO2 IN AUDIO OUT 3 45 DIGITAL LINK LAN 9 IR IN 10 IR OUT SERIAL IN SERIAL OUT 11 AV IN DVI-D IN DVI-D OUT USB 6 7 8 1 PC IN: 2 AUDIO1 IN: 3 COMPONENT / RGB / VIDEO IN: 4 AUDIO2 IN:
  • Panasonic TH-42SF1H | Operating Manual - Page 16
    Input / Output Terminal Control the Display by connecting to PC. (see page 21) Before connecting ● Before connecting cables, carefully read the operating instructions for the external device to be connected. ● Turn off the power of all devices before connecting cables. ● Take note of the following
  • Panasonic TH-42SF1H | Operating Manual - Page 17
    HDMI 1 and HDMI 2 terminals connection Note ● Video equipment and HDMI cable shown are not supplied with this unit. ● Some HDMI equipment may not be able to display picture. ● For audio, it is also possible to use AUDIO1 IN or AUDIO2 IN terminal input. (For [Audio input select] function, see page 64
  • Panasonic TH-42SF1H | Operating Manual - Page 18
    DVI-D IN / DVI-D OUT terminal connection Note ● Video equipment and cables shown are not supplied with this unit. ● Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or the quality of the cable. ● DVI-D IN terminal is for Single Link only. ●
  • Panasonic TH-42SF1H | Operating Manual - Page 19
    ● When inputting HDCP signal, it is possible to daisy chain up to 8 displays. ● The DVI-D output function is enabled when the picture is displayed via DVI-D IN. When using the daisy-chain connection method, all the displays should be in the state where the picture is displayed via DVI-D IN. Pin
  • Panasonic TH-42SF1H | Operating Manual - Page 20
    ● The computer shown in the illustration is for example purposes only. ● Additional computer, cables and conversion adapter shown are not supplied with this set. ● Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range. ●
  • Panasonic TH-42SF1H | Operating Manual - Page 21
    COMPONENT/RGB IN terminal connection Note ● Video equipment, cables and conversion adapter shown are not supplied with this unit. ● For audio, it is also possible to use AUDIO1 IN terminal input. (For [Audio input select] function, see page 64.) Shared with VIDEO IN. SERIAL terminal connection The
  • Panasonic TH-42SF1H | Operating Manual - Page 22
    It is possible to daisy chain multiple displays, and then control the specific display with PC. SERIAL IN SERIAL OUT IR IN IR OUT SERIAL IN SERIAL OUT IR IN IR OUT Pin assignments and signal names for SERIAL Terminal 12345 6789 Pin No. Signal Name NC (not connected) RXD TXD Non use
  • Panasonic TH-42SF1H | Operating Manual - Page 23
    an "ER401" command back to the computer. ● In Standby condition (power OFF with remote control), the unit responds to PON command only. ● Consult your local Panasonic dealer for detail instructions on command usage. For more details, visit the following web site. http
  • Panasonic TH-42SF1H | Operating Manual - Page 24
    IR IN/IR OUT terminal connection Connect the mini plug (M3) cable from the IR OUT terminal of the first display to the IR IN terminal of the second display. The infrared signal of the first display is sent to the second display. In this case, the IR (infrared ray reception on the remote control
  • Panasonic TH-42SF1H | Operating Manual - Page 25
    USB terminal connection Connect the USB memory (commercially available) to use [USB media player]. (see page 84) Also, power is supplied when a separately sold stick PC, etc. are connected. Note ● A stick PC and connection cables are not supplied with this unit. AV IN USB S tick PC U SB cable
  • Panasonic TH-42SF1H | Operating Manual - Page 26
    DIGITAL LINK terminal connection Twisted pair cable transmitters such as the Panasonic Digital Interface Box (ET-YFB100G) or the DIGITAL LINK Switcher (ET-YFB200G) use twisted pair cables to transmit inputted video and audio signals, and these
  • Panasonic TH-42SF1H | Operating Manual - Page 27
    Identifying Controls Unit Main Unit INPUT MENU 55-inch model 8 49-inch model 8 ● To take out/store the power indicator and remote control sensor, operate the lever on the rear panel. It is also possible to press the remote control sensor directly to store. Note ● For normal use, pull out the
  • Panasonic TH-42SF1H | Operating Manual - Page 28
    18 Numeric buttons (1 - 6) ● Used as shortcut buttons by assigning frequently used operations. (see page 58) 19 Signal emission Note ● In this manual, buttons of the remote control and the unit are indicated as < >. (Example: .) The operation is mainly explained indicating the remote control
  • Panasonic TH-42SF1H | Operating Manual - Page 29
    Basic Controls AC socket outlet AC cord (supplied) Main Power On / Off button (Back of the unit) Remote Control Sensor / Power Indicator Operate pointing the remote control directly at the unit's Remote Control Sensor. Note ● For normal use, pull out the remote control sensor from the edge side of
  • Panasonic TH-42SF1H | Operating Manual - Page 30
    ■■When the Unit is turned on for the first time Following screen will be displayed. 1 Select the language with and press . OSD language English (UK) Deutsch Français Italiano Español ENGLISH (US) 2 Select [Year] / [Month] / [Day] / [Hour] / [Minute] with and set with . Date and
  • Panasonic TH-42SF1H | Operating Manual - Page 31
    retention (image lag) may occur on the liquid crystal panel when a still picture is kept on the panel for an extended period. To prevent such a problem, using the screensaver and wobbling is recommended. (see page 49, 52) RECALL It is possible to check the setting status of input label, picture mode
  • Panasonic TH-42SF1H | Operating Manual - Page 32
    Volume Adjustment Press or to adjust volume. Unit INPUT MENU OFF TIMER The Display can be preset to switch to stand-by after a fixed period. (30 min, 60 min, 90 min) The setting switches each time is pressed. ● [0 min] → [30 min] → [60 min] → [90
  • Panasonic TH-42SF1H | Operating Manual - Page 33
    ASPECT Controls Press or repeatedly to move through the aspect options: Unit INPUT MENU ENTER [4:3] → [Zoom1] → [Zoom2] → [16:9] Note ● The aspect mode is memorised separately for each input terminal. ● When input from USB, the aspect mode is fixed to [16:9]. ■■List of
  • Panasonic TH-42SF1H | Operating Manual - Page 34
    to exit the mode. The screen returns to the previous state just before entering the digital zoom mode, and the digital zoom operation guide display disappears. ● Press any of the following buttons to exit the mode. Then, the operation of the pressed button is performed. Remote Control
  • Panasonic TH-42SF1H | Operating Manual - Page 35
    On-Screen Menu Displays 1 Display the menu screen. Remote Control 3 Set. Press to select. Press to select. Unit INPUT MENU Press for several times. Each time the button is pressed, the menu screen will switch. Normal Viewing → [Picture] → [Setup] → [Position] → [Sound] 2 Select the item. 
  • Panasonic TH-42SF1H | Operating Manual - Page 36
    Menu display list ● Menu that cannot be adjusted is greyed out. Adjustable menu changes depending on signal, input and menu setting. [Position] menu (see page 37 - 38) Position Default Default Auto setup H-position 0 H-size 0 V-position 0 V-size 0 Clock phase 15 Dot clock 0 1:1
  • Panasonic TH-42SF1H | Operating Manual - Page 37
    , or when some SYNC ON G signals are input. ● If Auto Setup does not work well, select [Default], press , and then adjust the position/size manually. English 37
  • Panasonic TH-42SF1H | Operating Manual - Page 38
    [H-position] Adjust the horizontal position with . [H-size] Adjust the horizontal size with . Note ● In some cases, noise appears outside the area picture is displayed, but it is not a malfunction. [V-position] Adjust the vertical position with . [V-size] Adjust the vertical size with . [
  • Panasonic TH-42SF1H | Operating Manual - Page 39
    Sound Adjustment 1 Press to display the [Sound] menu. Sound Default Output select Balance Sound mode Bass Treble Surround Default SPEAKERS 0 Normal 0 0 Off 2 Select the item to adjust with . ● Menu that cannot be adjusted is greyed out. 3 Adjust with . 4 Press to exit
  • Panasonic TH-42SF1H | Operating Manual - Page 40
    Picture Adjustments 1 Press to display the [Picture] menu. Picture Default Default Picture mode Backlight 50 Contrast 50 Brightness 50 Colour 50 Hue 50 Sharpness 50 Enhance level Gamma Colour temperature 6-segment colour management Dynamic contrast 5 Colour
  • Panasonic TH-42SF1H | Operating Manual - Page 41
    [Brightness] [Colour] [Hue] Adjusts for easier viewing of dark pictures. Darker ↔ Brighter Adjusts colour saturation. Less ↔ More Adjusts hue of skin colour. Reddish ↔ Greenish ● In [ENGLISH(US)] OSD language, [Hue] is displayed as [TINT]. [Sharpness] [Enhance level] [Gamma] Adjusts picture
  • Panasonic TH-42SF1H | Operating Manual - Page 42
    [G bias] Adjusts the white balance for dark green areas. -127 to 128 [B bias] Adjusts the white balance for dark blue areas. -127 to 128 The settings are saved for the user. When you return to [Picture] menu, the user you have set is selected for [Colour temperature]. Enhance level Gamma Colour
  • Panasonic TH-42SF1H | Operating Manual - Page 43
    Picture Profiles Up to 6 combinations of picture adjustment values (in the [Picture] menu) can be stored in the display memory as profiles and applied as needed, for a convenient way to enjoy your preferred picture settings. Picture Default Default Picture mode Backlight 50 Contrast 50
  • Panasonic TH-42SF1H | Operating Manual - Page 44
    Saving profiles Follow these steps to save picture adjustment values as profiles. 1 Specify the picture quality in the [Picture] menu. (see page 40 - 42) 2 In the [Picture] menu, select [Memory save] with and press . Memory save Memory load Memory edit 3 Select a profile name for saving the
  • Panasonic TH-42SF1H | Operating Manual - Page 45
    When profile is being loaded, profile name is displayed. PC 16:9 Memory name: MEMORY2 Note ● Loaded profiles are stored in memory according to the selected input terminal. Editing profiles Delete or rename profiles as follows. ■■Deleting profiles 1 In the [Picture] menu, select [Memory edit] with
  • Panasonic TH-42SF1H | Operating Manual - Page 46
    Setup menu 1 Press to display the [Setup] menu. Setup 1/2 Signal Screensaver Input label Power management settings LightID Wobbling No activity power off OSD language External control Off Disable English(UK) Setup 2/2 Multi display settings Set up timer Date and time Network settings
  • Panasonic TH-42SF1H | Operating Manual - Page 47
    Min], [Mid], [Max]: Sets strength of Noise Reduction. ■■[XGA mode] This menu is displayed at PC IN and COMPONENT/ RGB IN inputs. This unit supports XGA signals (1024 × 768, 1280 × 768, 1366 × 768) having different aspect ratios and sampling rates. [Auto]: Automatically detects the signal. Switch the
  • Panasonic TH-42SF1H | Operating Manual - Page 48
    ■■[Signal range] This menu is displayed at HDMI1, HDMI2, DIGITAL LINK and DVI-D IN inputs. Switches the dynamic range to match the signals from the source connected to each terminal. [Video(16-235)]: If the input signal is the video range Example: HDMI terminal output for DVD player [Full(0-255)]:
  • Panasonic TH-42SF1H | Operating Manual - Page 49
    Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. [Screensaver] - submenu screen Screensaver Start Mode 2016/01/01 FRIDAY 10:00 Off ■■Screensaver settings
  • Panasonic TH-42SF1H | Operating Manual - Page 50
    Input label This function can change the label of the Input signal to be displayed. [Input label] - submenu screen Input label HDMI1 HDMI2 DIGITAL LINK DVI-D PC COMPONENT VIDEO HDMI1 HDMI2 DIGITAL LINK DVI-D PC COMPONENT VIDEO [HDMI1] [HDMI2] [DIGITAL LINK] [DVI-D] [PC] [COMPONENT]* [VIDEO] [
  • Panasonic TH-42SF1H | Operating Manual - Page 51
    , a sample ID is included in the Internal LightID. If [LightID] is set to [Internal ID] at the time of purchase, an ID to guide you to the Panasonic homepage is sent. ● In the following cases, the reception performance of the LightID using devices, such as a smartphone may be degraded. •• When the
  • Panasonic TH-42SF1H | Operating Manual - Page 52
    ● For handling devices receiving the LightID, such as a smartphone, see the following Panasonic web site. http://panasonic.net/avc/LinkRay/ ● The LightID function of this unit does not guarantee all the operations of a smartphone and other devices. Wobbling Automatically shifts the display
  • Panasonic TH-42SF1H | Operating Manual - Page 53
    ■■[Bezel H adjustment], [Bezel V adjustment] Adjust the area of image hidden in the joint horizontally and vertically respectively. 0 to 100 Display example Setting value: 0 Displays the entire image including the joint area. (Suitable when displaying character information on PC.) Setting value: 100
  • Panasonic TH-42SF1H | Operating Manual - Page 54
    RS232-C control terminal. [SERIAL IN]: Controls using the SERIAL IN terminal of the display. [DIGITAL LINK]: Controls via the optional device that supports DIGITAL LINK output (ET-YFB100G, ETYFB200G) and the DIGITAL LINK / LAN terminal. ■■[Network control] Set when controlling with the unit's LAN
  • Panasonic TH-42SF1H | Operating Manual - Page 55
    mask], [Gateway] Press to set [On] / [Off] of [DHCP] and press . When [Off] is selected, IP address and other settings can be set manually. [DHCP]: (DHCP client function) [On]: Obtains an IP address automatically when a DHCP server exists in the network the Display is going to be connected
  • Panasonic TH-42SF1H | Operating Manual - Page 56
    mode] to [Long reach]. ● Even if [DIGITAL LINK mode] is set to [Long reach], when the twisted pair cable transmitter does not support the communication method of [Long reach], it will not be connected properly. ■■DIGITAL LINK status Display the DIGITAL LINK connection environment. Select [DIGITAL
  • Panasonic TH-42SF1H | Operating Manual - Page 57
    and press Note ● This function can only be selected when the Panasonic device that supports DIGITAL LINK output (ET-YFB100G, ET-YFB200G) is connected to and its power is on. ● For details, refer to the manuals of the devices that support DIGITAL LINK output. ■■[AMX D. D.] Set whether to allow the
  • Panasonic TH-42SF1H | Operating Manual - Page 58
    screen Function button settings Function group Function button 1 Function button 2 Function button 3 Function button 4 Function button 5 Function button 6 Function button guide Input HDMI1 HDMI2 DIGITAL LINK DVI-D PC USB On Input ↓ Memory load ↓ Shortcut 2 Select the numeric button with and set
  • Panasonic TH-42SF1H | Operating Manual - Page 59
    3 Press - . The function for the pressed button starts to operate. Example: When is pressed. Memory load Load from "MEMORY2" Ok Cancel Display orientation Sets the on-screen display orientation in the portrait setting. [Landscape]: On-screen display angle is for horizontal
  • Panasonic TH-42SF1H | Operating Manual - Page 60
    on message(Power management) POWER button lock 3/3 Off Off On On Off Note ● [POWER button lock] function is only for TH55SF1HU, TH-49SF1HU and TH-42SF1HU. 4 Select the item to set with . For [Input search], [Failover/Failback], [Audio input select] and [Information timing], the submenu screen
  • Panasonic TH-42SF1H | Operating Manual - Page 61
    [Custom]: Repeatedly searches [Current input], [1st search input] and [2nd search input] in order, and switches to an input with a signal. PC Searching... [Searching...] is displayed during the input search. [1st search input], [2nd search input] Set the input to search when [Custom] is selected. [
  • Panasonic TH-42SF1H | Operating Manual - Page 62
    [Auto switch back mode] Sets whether or not to automatically return to the former (main) input when the former input video initially viewed is restored while viewing the video of the backup input enabled by the operation of the Backup Input function. [Disable]: Unreturned [Enable]: Returned [
  • Panasonic TH-42SF1H | Operating Manual - Page 63
    ■■[Input change mode]: [Normal] Switches to the backup input if an interruption of video occurs. Note ● When an analogue (PC, COMPONENT or VIDEO) input is being used for viewing, you cannot set an analogue (PC, COMPONENT or VIDEO) input as a backup input. ● Any analogue (PC, COMPONENT or VIDEO)
  • Panasonic TH-42SF1H | Operating Manual - Page 64
    Recall display Pressing displays any of the followings. ● When the main input is being used for viewing and the operating conditions for the Backup Input function are met. HDMI1 16:9 Backup mode OK ● When the backup input, enabled by the operation of the Backup Input function, is being used
  • Panasonic TH-42SF1H | Operating Manual - Page 65
    ■■To adjust sound volume level Press . Note ● When [Maximum VOL level] is [On], the volume cannot be set to the level higher than the level set for [Maximum VOL level]. Maximum VOL level Adjusts the maximum volume. [Off]: The sound volume level can be set up to 100 (maximum). [On]:
  • Panasonic TH-42SF1H | Operating Manual - Page 66
    be set in order to reduce a power load. Startup logo Sets to display / not to display the Panasonic logo on the screen when the display is turned on. [Off]: Panasonic logo is not displayed. [On]: Panasonic logo is displayed. Display ID Sets ID number when controlling the Display with [Controller ID
  • Panasonic TH-42SF1H | Operating Manual - Page 67
    a daisy chain LAN control protocol Select the LAN control protocol. [Protocol 1]: Control with the Panasonic Display sequence. [Protocol 2]: Control with the sequence that is compatible with Panasonic Projector. Note ● For PJLink and WEB browser control, the operation is possible regardless of the
  • Panasonic TH-42SF1H | Operating Manual - Page 68
    button>. [On]: operation is disabled. [Off]: operation is enabled. Note ● This function is only for TH-55SF1HU, TH-49SF1HU and TH-42SF1HU. 68 English
  • Panasonic TH-42SF1H | Operating Manual - Page 69
    Initialization When both main unit buttons and remote control buttons are disabled due to the [Button lock], [Controller user level] and [Controller ID function] settings, set all the values [Off] so that all the buttons are enabled again. Press together with and hold for more
  • Panasonic TH-42SF1H | Operating Manual - Page 70
    . For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter. ■■About Web Browser Web Browser is picture noise may be caused. ● Make sure the broadband router or hub supports 10BASE-T/100BASE-TX. ● Touching the LAN Terminal with a statically charged hand
  • Panasonic TH-42SF1H | Operating Manual - Page 71
    output (ET-YFB100G, ETYFB200G). For the twisted pair cable transmitter of other manufacturers, see the web site: http://panasonic.net/prodisplays/support/digitallink.html ● Panasonic has tested other manufacturers' devices according to our check items. This will not guarantee all the operations. For
  • Panasonic TH-42SF1H | Operating Manual - Page 72
    the same way as serial control from a network. Supported commands Commands used in the serial control are supported. (see page 23) Control Command via LAN The and password are as follows: User name: admin1 Password: panasonic 72 English Command transmission method Transmit in the following command
  • Panasonic TH-42SF1H | Operating Manual - Page 73
    rong data length 1 byte 2. When [LAN control protocol] is set to [Protocol 2]. Communicates with the same protocol as that of a Panasonic projector ■■When the command control administrator privileges password has been set (Protect mode) Connection method 1 Obtain the display's IP address and the
  • Panasonic TH-42SF1H | Operating Manual - Page 74
    name yyyyy : Above administrator privileges user password ● Default user name and password are as follows: User name: admin1 Password: panasonic zzzzzzzz : 8-byte random number obtained in step 2 Command transmission method Transmit in the following command format Transmitted data Header Hash
  • Panasonic TH-42SF1H | Operating Manual - Page 75
    Class 1. The following operations can be performed from a computer when PJLink protocol is used. ● Setting the Display ● Querying the Display status Supported commands The commands to control the unit with PJLink protocol are as follows. Command POWR POWR? INPT INPT? AVMT Control Power control
  • Panasonic TH-42SF1H | Operating Manual - Page 76
    to PC has completed. ● For more details, visit the following web site. http://panasonic.net/prodisplays/products/et-swa100/index.html Multi Monitoring & Control Software This unit supports "Multi Monitoring & Control Software" which monitors and controls devices (projectors or flatpanel displays
  • Panasonic TH-42SF1H | Operating Manual - Page 77
    Connecting with LAN Using Web Browser Control Note ● To use the network function, set each item in [Network settings] and be sure to set [Network control] to [On]. (see page 54) Computer operation 1 Turn on the computer. 2 Make the network setting according to your system administrator. When the
  • Panasonic TH-42SF1H | Operating Manual - Page 78
    and the PJLink security authentication. ● Default user name and password are as follows: User name: user1 (user rights), admin1 (administrator rights) Password: panasonic Change password first. ● The password can be changed on the Password Setup screen after logging in (see page 80). Log in with
  • Panasonic TH-42SF1H | Operating Manual - Page 79
    Network status page Change Password page Click [Status], then [Network Status] to display the Status information page. Click [Change password]. Displays the current configuration information of the network. 1 2 Displays the configuration details of wired LAN. Basic control page To move from
  • Panasonic TH-42SF1H | Operating Manual - Page 80
    ■■User mode A user can change password only. 1 2 3 4 Current password input field New password input field New password input field (re-enter for confirmation) Button for executing password change Note ● Up to 16 alphanumeric characters can be used for a password. ● When changing the administrator
  • Panasonic TH-42SF1H | Operating Manual - Page 81
    Ping test page This page makes it possible to check whether the network is connected to the DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. [Browser Remote Control] It is possible to operate the display with the operation buttons displayed on the WEB
  • Panasonic TH-42SF1H | Operating Manual - Page 82
    can monitor or control the Display using "Crestron Connected™". If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. In this case, return to the previous page by clicking [Back] in the operation page. ● Operation page [Tools
  • Panasonic TH-42SF1H | Operating Manual - Page 83
    ● [Tools] page Click [Tools] on the operation page. Panasonic LCD Display ● [Info] page Click [Info] on the operation page. [Control System] Sets the information required for the communication with the controller that is connected
  • Panasonic TH-42SF1H | Operating Manual - Page 84
    the playback list can be delivered. For details, refer to the manual of Multi Monitoring & Control Software. Single Media Player Files are Up to 32 GB of USB memory in size are supported. ● Only single partition configuration is supported. ■■Preparation Prepare the following files in the USB memory
  • Panasonic TH-42SF1H | Operating Manual - Page 85
    Rights Management (DRM) cannot be played back. ● Some files may not be played back even if their formats are supported as described here. ● Use a file of which audio and video are both supported. ● If the audio codec of motion picture file is incompatible in format, the pictures may not be correctly
  • Panasonic TH-42SF1H | Operating Manual - Page 86
    Playing back the files ■■Example of setting in each mode Single Media Player (Type 1) Files will be played in the order in which their names appear in USB memory. Scenario, file list and LightID definition file Scenario: Unnecessary File list: Unnecessary LightID definition file: Unnecessary Setting
  • Panasonic TH-42SF1H | Operating Manual - Page 87
    previous playback file with , or play back again from the beginning of the file with (Remote control operation only). ● [Multi display settings] supports 2×1, 1×2 and 2×2. (see page 52) ● If this unit is adjacently installed when using the LightID function, the reception sensitivity of LightID on
  • Panasonic TH-42SF1H | Operating Manual - Page 88
    /filelist.dat/lightid.dat cannot be opened. There is an error in the contents of scenario.dat/filelist.dat. The play file format is not supported. No play file exists. The necessary group ID for Multi Media Player has not been specified. There are several identical file definitions. The scenario
  • Panasonic TH-42SF1H | Operating Manual - Page 89
    Starting / ending Media Player ■■For Single Media Player Start 1. Insert the USB memory device for Media Player into the USB terminal of the display unit. Note ● Depending on the type of a USB memory device, it may come in contact with the periphery such as a back cover, and cannot be attached. Use
  • Panasonic TH-42SF1H | Operating Manual - Page 90
    ID Remote Control Function You can set the remote control ID when you want to use this remote control on one of several different displays. In that case, you need to set the remote control's ID number to match the Display's ID number you have set in [Options] - [Display ID] following the steps below
  • Panasonic TH-42SF1H | Operating Manual - Page 91
    Entering characters Some settings require to enter characters. To enter text, select characters in the on-screen keyboard. Example: Entering profile names ([Memory save]) MEMORY1█ 1234567890 abcde f gh i j k l mn o p q r s t u vwx y z . -_ Delete All delete a/A/@ Cancel Ok The default
  • Panasonic TH-42SF1H | Operating Manual - Page 92
    Preset Signals This unit can display the video signals shown in the table below. ■■Video signal Corresponding signal Resolution (Dot) NTSC/NTSC4.43/ PAL-M/PAL60 PAL/PAL-N/SECAM 525i(480i) 625i(576i) 525i(480i) 625i(576i) 525p(480p) 625p(576p) 750(720)/60p 750(720)/50p 1 125(1 080)/60i*1 1 125(1
  • Panasonic TH-42SF1H | Operating Manual - Page 93
    IN) H : HDMI (HDMI 1, HDMI 2) DL : DIGITAL LINK (DIGITAL LINK) The analogue input supports onG and onY. Dot clock frequency (MHz) 108.00 148.50 108.00 135.00 157.50 85 B ased on VESA CVT-RB (Reduced Blanking) standard *6: N ot supported when [DIGITAL LINK mode] is set to [Long reach]. *7: T he
  • Panasonic TH-42SF1H | Operating Manual - Page 94
    Shipping condition You can reset the settings / the adjusted values of the following menus to the factory settings: [Picture], [Sound], [Setup], [Position], [Options] ■■Remote control 1 Press to display the [Setup] menu. 2 Select [OSD language] with and press for more than 3 seconds
  • Panasonic TH-42SF1H | Operating Manual - Page 95
    devices other than those formatted in FAT16 or FAT32 cannot be used. ● Up to 32 GB of USB memory in size are supported. ● Only single partition configuration is supported. Note ● If the sizes of the displays are different, the cloning function does not operate. Use the common sized displays. ● The
  • Panasonic TH-42SF1H | Operating Manual - Page 96
    the power plug, wait sufficient time, and then connect the power plug again to turn the power on. ● [POWER button lock] function is only for TH-55SF1HU, TH-49SF1HU and TH-42SF1HU. 96 English
  • Panasonic TH-42SF1H | Operating Manual - Page 97
    devices other than those formatted in FAT16 or FAT32 cannot be used. ● Up to 32 GB of USB memory in size are supported. ● Only single partition configuration is supported. Note ● Only one Internal LightID can be written. ● Save only the LightID-distribution file in the USB memory device. If multiple
  • Panasonic TH-42SF1H | Operating Manual - Page 98
    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks On (Enable)]. (see page 50) There is possibility of malfunction. Please contact an Authorized Service Centre. Check whether the batteries have discharged completely and, if they have not, whether they
  • Panasonic TH-42SF1H | Operating Manual - Page 99
    of the screen. Even when the temperature of parts of the front, top and rear panels has risen, these temperature rises will not pose any problems in terms of performance or quality. When HDMI or DVI signals are input to the Display using a selector or distributor, sound or images may not
  • Panasonic TH-42SF1H | Operating Manual - Page 100
    reduce image retention on the screen and the shortening of the screen's service life: It is normal and not indicative of malfunctioning. The unit . This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you
  • Panasonic TH-42SF1H | Operating Manual - Page 101
    approx. 15.5 / 54.9 lbs net / 42.4 lbs net / 34.2 lbs net Power source TH-55SF1HU, TH-49SF1HU, TH-42SF1HU: 110 ‒ 127 V ~ (110 ‒ 127 V alternating current), 50/60Hz TH-55SF1HW, TH-49SF1HW, TH-42SF1HW: 220 ‒ 240 V ~ (220 ‒ 240 V alternating current), 50/60Hz Operating condition Temperature 0 °C to
  • Panasonic TH-42SF1H | Operating Manual - Page 102
    : RJ45 100BASE-TX IR IN Stereo mini jack (M3) × 1 IR OUT Stereo mini jack (M3) × 1 USB TYPE A USB connector × 1 DC 5V / 1A (USB 3.0 is not supported.) Sound Speakers 80 mm × 30 mm × 2 pcs Audio Output 20 W [10 W + 10 W] (10 % THD) Remote Control Transmitter Power source DC 3 V (battery (AAA/R03/UM4
  • Panasonic TH-42SF1H | Operating Manual - Page 103
    at high altitudes (1 400 m (4 593 ft) and higher and below 2 800 m (9 186 ft) above sea level): 0 °C to 35 °C (32 °F to 95 °F) *2: VIERA LINK is not supported. Note ● Design and specifications are subject to change without notice. Mass and dimensions shown are approximate. English 103
  • Panasonic TH-42SF1H | Operating Manual - Page 104
    the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Contact Information: [email protected] Notice about AVC/VC-1/MPEG-4 This product is licensed under the AVC Patent Portfolio License, VC-1 Patent Portfolio License and MPEG-4 Visual
  • Panasonic TH-42SF1H | Operating Manual - Page 105
    Riverfront Plaza, Newark, New Jersey 07102-5490 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 For TH-55SF1HW, TH-49SF1HW and TH-42SF1HW Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Operating Instructions
Functional Manual
FULL HD LCD Display
For business use
Model No.
TH-55SF1HU
55-inch model
TH-49SF1HU
49-inch model
TH-42SF1HU
42-inch model
TH-55SF1HW
55-inch model
TH-49SF1HW
49-inch model
TH-42SF1HW
42-inch model
English
Please read these instructions before operating your set
and retain them for future reference.
*
This manual is common to all the models regardless of suffixes of the
model number.
U : for US, Canada and Mexico
W : for EU, CIS, South East Asia and Middle East Asia
DPQP1107ZA
EU