Panasonic TH-42SF1H Spec Sheet

Panasonic TH-42SF1H Manual

Get Panasonic TH-42SF1H PDF manuals and user guides View all Panasonic TH-42SF1H manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic TH-42SF1H manual content summary:

  • Panasonic TH-42SF1H | Spec Sheet - Page 1
    FULL HD LCD Display TH-42SF1HU Product specification (design kHz 0 dB Input,10 k Ω Load) USB 2.0 Type A connector x 1 DC 5 V/1A (USB 3.0 is not supported.) ■ AUDIO Built in Speaker Audio Output 10 W (8 Ω , Full Range : 80 mm x 30 mm) x 2 Panasonic Corporation 2016 1/5 42SF1HU_PKH_01_05/10/2016
  • Panasonic TH-42SF1H | Spec Sheet - Page 2
    during Light ID transmission and not due to trouble. *In case of running for a long time 2.6(65.7) TH-42SF1HU STANDARD ( - Clamper x 3 - CD-ROM / User Manual OPTIONAL ACCESSORIES Pedestal Stand TY-ST43PE8 Cautions: This drawing 1.0(25) 0.1(3) © Panasonic Corporation 2016 * Specifications and
  • Panasonic TH-42SF1H | Spec Sheet - Page 3
    42-inch Class FULL HD LCD Display TH-42SF1HU List of correspondence signals The picture signal which can indicate this machine is as it is the (dot clock frequency 27.0 MHz) only *4：Based on VESA CVT-RB (Reduced Blanking) standard © Panasonic Corporation 2016 3/5 42SF1HU_PKH_01_05/10/2016
  • Panasonic TH-42SF1H | Spec Sheet - Page 4
    42-inch Class FULL HD LCD Display Drawing of terminals View from back TH-42SF1HU Magnified figure of terminal b IR IN IR OUT SERIAL IN SERIAL OUT Magnified figure connecting cable or USB memory device after confirmation in this drawing. © Panasonic Corporation 2016 4/5 42SF1HU_PKH_01_05/10/2016
  • Panasonic TH-42SF1H | Spec Sheet - Page 5
    42-inch Class FULL HD LCD Display TH-42SF1HU Installation precautions The SF1H Series is designed for use in either tilting 45° Portrait orientation Power Indicator Portrait 45° Landscape orientation 45° Portrait orientation © Panasonic Corporation 2016 5/5 42SF1HU_PKH_01_05/10/2016
  • 1
  • 2
  • 3
  • 4
  • 5
© Panasonic Corporation 2016
1/5
42SF1HU_PKH_01_05/10/2016
42-inch Class FULL HD LCD Display
TH-42SF1HU
Product specification
(design and specification subject to change without notice)
■ DISPLAY PANEL
Screen Size (Diagonal)
42-inch (1064 mm)
Panel type
IPS / Edge-LED
Aspect ratio
16:9
Effective Display Area (W x H)
36.5" x 20.5" (927 x 521 mm)
Number of pixels (H ｘ V)
1920 x 1080 pixels
Brightness
700 cd/m
2
(Typ)
Contrast Ratio
1300:1
Dynamic Contrast
50000:1
Response Time
8 ms (G to G)
Viewing Angle (Horizontal / Vertical)
178° / 178° (CR ≧ 10)
Panel Surface Treatment
Anti glare type (Haze 10%)
Panel Life Time
*1
approx. 60000 hours (typ)
*1 When the panel lifetime is at 50% of the brightness under the condition of 25 degrees Celsius (+/- 2 degrees celsius).
■ CONNECTION TERMINAL
HDMI IN
HDMI Type A Connector x 2
Linear PCM
(Sampling frequency：48 kHz/44.1 kHz/32 kHz)
COMPONENT / RGB IN
BNC x 1
Y/G
:
BNC Contact Plug with sync 1.0 V [p-p] (75 Ω )
P
B
/C
B
/B
:
BNC Contact Plug 0.7 V [p-p] (75 Ω )
P
R
/C
R
/R
:
BNC Contact Plug 0.7 V [p-p] (75 Ω )
AUDIO IN
Stereo Mini Jack (M3) x 1 (Shared with VIDEO IN)
0.5 V [rms]
VIDEO IN
BNC x 1 (Shared with COMPONENT/RGB Y/G)
1.0 V [p-p] (75 Ω )
AUDIO IN
Stereo mini Jack (M3) x 1 (Shared with COMPONENT IN)
0.5 V [rms]
DVI-D IN
DVI-D 24-pin x 1
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
AUDIO IN
Stereo mini Jack (M3) x 1 (Shared with PC IN)
0.5 V [rms]
DVI-D OUT
DVI-D 24-pin x 1
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
PC IN
Mini D-Sub 15-pin x 1
(Female)
Y/G
P
B
/C
B
/B
P
R
/C
R
/R
HD/VD
: with sync 1.0 V [p-p] (75 Ω )
: without sync 0.7 V [p-p] (75 Ω )
: 0.7 V [p-p] (75 Ω )
: 0.7 V [p-p] (75 Ω )
: 1.0 - 5.0 V [p-p] (high impedance)
AUDIO IN
Stereo mini Jack (M3) x 1 (Shared with DVI-D IN)
0.5 V [rms]
SERIAL IN / OUT
D-sub 9-pin x 1 / x 1, RS-232C Compatible
LAN / DIGITAL LINK IN
RJ45 x 1 100BASE-TX, compatible with PJLink
IR TRANSMITTER IN / OUT
Stereo Mini Jack (M3) x 1 / x 1
AUDIO OUT
Stereo Mini Jack (M3) x 1
0.5 V [rms]
Variable (- ∞ - 0 dB) (1 kHz 0 dB Input,10 k Ω Load)
USB
USB 2.0 Type A connector x 1
DC 5 V/1A (USB 3.0 is not supported.)
■ AUDIO
Built in Speaker
10 W (8 Ω , Full Range : 80 mm x 30 mm) x 2
Audio Output
20 W [10 W + 10 W]
■ ELECTRICAL
Power Requirements
110 - 127 V AC 50 Hz / 60 Hz
Power Consumption
155 W
On Mode Average Power Consumption*
110 W
Power Off Condition
approx. 0.3 W
Stand-by Condition
approx. 0.5 W
Apparent power
165 VA
*Based on IEC 62087 Ed.2 measurement method
■ MECHANICAL
Dimensions (W x H x D)
37.3" x 21.3" x 2.9" (947 x 541 x 72 mm)
Dimensions (W x H x D)
(Excluding handle part)
37.3" x 21.3" x 2.3" (947 x 541 x 57 mm)
Weight
approx. 34.2 lbs. (15.5 kg)
Bezel Color
Black
Bezel Width
T/B/R/L : 0.25" (6.3 mm)
Carton Dimensions (W x H x D)
44.3" x 29.3" x 8.0" (1123 x 743 x 203 mm)
Gross Weight
approx. 44.1 lbs. (20 kg)
Cabinet Material
Metal (Front , Back cover)
Pitch for Wall-Hanging
VESA Compliant 7.9" x 7.9" (200 x 200 mm) (Installed by : M6 screws / Screw hole depth 0.39" (10 mm))
■ INSTALLATION
Orientation
Landscape / Portrait (Angle adjustment 0 - 45 degrees for both left and right)
Tilting Angle
0 - 45 degrees forward / backward with landscape / portrait setting
(Angle adjustment is not possible for forward / backward tilting installation.)
*Please contact your sales representative with regard to the tilt angle before installation.
■ ENVIRONMENTAL
Operating Environment
Temperature
: 32
°
F to 104
°
F (0℃ to 40℃ )*
1
: 32
°
F to 95
°
F (0℃ to 35℃ )*
2
Humidity
: 20% to 80% (No condensation)
Altitude
：0 to 9186 ft (0 to 2800 m)
Storage Environment
Temperature
: -4
°
F to 140
°
F (-20℃ to 60℃ )
Humidity
: 20% to 80% (No condensation)
*1 : for up to 4593 ft (1400 m) altitude
*2 : for between 4593 ft (1400 m) and 9186 ft (2800 m) altitude
Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.
・This unevenness will disappear while applying current continuously. If not, consult the distributor.
UPC Code
885170304031