Panasonic TH-55LF80 Multi Monitoring and Control Software Operating Instructio
Panasonic TH-55LF80 Manual
View all Panasonic TH-55LF80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic TH-55LF80 manual content summary:
- Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 1
Windows Operating Instructions Multi Monitoring & Control Software Multi Monitoring & Control Software 2.1 Thank you for purchasing this Panasonic product. ■ Before using this software, please read the instructions carefully. DPQP1198ZC/X1 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 2
Contents Introduction 4 Software Licensing Agreement 4 Request Regarding Security 6 About this document 8 Terms used in this document 8 What You can do with this Software.........10 Preparation 15 System Requirements 15 Network Configuration 17 Steps to Start Operation 19 Installing the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 3
Contents Setting Options for the Monitoring and Control Functions 189 Setting the Information Updating Interval 190 Setting the Number of System History Entries that can be Saved 191 Setting the Port Number for Command Control 193 Setting the Status Notification Function 194 Changing the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 4
shall not be bound by warranty for any defects in the Software caused by reverse engineering, decompiling or disassembly of the Software. Furthermore, Panasonic or its distributors or dealers will not be responsible for any damage to the Licensee caused by the reverse engineering, decompiling or - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 5
Software Licensing Agreement Introduction 6. After-sales Service If a problem should occur with the Software while Licensee is using the Software, the Panasonic Projector Support Center should be contacted. Panasonic shall undertake to notify Licensee of whether the problem is a known error in the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 6
never directly ask customers for their password. Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation. • Regularly run Windows Update to keep the operating system on the computer up-to-date. • Always use on a network that has safety - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 7
after purchase. To decrease the possibility of occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all security-related settings according to the instructions given in the operation manuals supplied with them. Depending on the specifications of the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 8
operating system and the various routers, please see their respective instruction manuals. • In this document, "(page X)" indicates a page to menu. Terms used in this document Device "Device" refers to a Panasonic display device (projector or flat panel display). Peripheral device "Peripheral device - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 9
temporarily connected to the network. PASS The Panasonic Professional Display and Projector Technical Support Website. PASS manages licenses for the early information quickly and securely. The LinkRay Light ID solution service provided by Panasonic works as follows. Using the camera on your mobile - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 10
will differ depending on the device or peripheral device. • For the devices and peripheral devices compatible with this software, please visit the following web https://panasonic.net/cns/projector/download/application/multiprojector/ https://panasonic.net/cns/prodisplays/download/software/multi/ 10 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 11
What You can do with this Software Introduction Monitoring and control functions This section describes the main functions that are carried out from the monitoring and control terminal. The early warning function (paid) can be added by activating it. (page 13) ■■Registering and updating devices - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 12
functions that can be used may differ from one device model to another. For information refer to the "List of Compatible Device Models" on the Panasonic website ((https://panasonic.net/cns/projector/download/) or (https://panasonic.net/cns/ prodisplays/download/software/)). 12 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 13
What You can do with this Software Introduction Early warning function (paid) The function can be added by purchasing a license and activating the software. This function can be run on the monitoring and control terminal where this software is installed, or remotely by logging in from a web - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 14
What You can do with this Software Introduction ■■Editing function (on the client terminal) Maintenance cycle editing function (page 181) Allows you to configure the length of time after which consumable parts replacement, parts cleaning, and regular parts replacement should be performed ( - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 15
• In the case of Windows 7, the software operates with the pre-installed .NET Framework 3.5.1. If not installed, download and install .NET Framework 3.5 Service Pack 1 from the Microsoft website. (page 21) • In the case of Windows 8.1 and Windows 10, enable the installed .NET Framework 3.5 function - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 16
Edge. (As of August 2018) iPad or iPhone running iOS 9, 10 Web browser: Safari • Operation is not supported when displaying the desktop version of the site. • Operation is not supported when using Split View of the Multitasking function. • Operation of the web screen display function available on - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 17
adapter switched on? • Install the required driver for the LAN adapter before making a connection. Install the driver according to the instructions in the operating instructions supplied with the LAN adapter. Notes • The monitoring and control terminal should be set to a unique, fixed address on the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 18
the conditions for the detection of warnings and errors. [Information timing] Notes • For how to set a device or peripheral device, check the operation manual of the device or peripheral device you are using. • This software identifies the device using the configured IP address. If DHCP is set to - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 19
Preparation Steps to Start Operation The steps from software installation to start of operation are listed below. Installing the software 1 Downloading the installation file (page 20) Computer with Internet connection 2 Installing the software (page 20) setup.msi Monitoring and control terminal - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 20
. The installer will start. Verify that the [Publisher] field displayed during installation is set to Panasonic Corporation before continuing the installation. 3 Follow the instructions on the screen to complete the installation. When the installation completes, the completion screen appears - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 21
installation of the software, and enable the .NET Framework 3.5 function before performing installation again. -- Windows 7 Install .NET Framework 3.5 Service Pack 1 downloaded from the Microsoft website. -- Windows 8.1 and Windows 10 See "Cannot install the software under Windows 8.1 or Windows - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 22
, and then click [Finish]. Repair: Repair defects in the software Remove: Uninstall the software and reinstall it (When "Repair" is selected) 2 Follow the instructions on the screen to continue the installation. When the installation completes, the completion screen appears. 3 Click [Close]. 22 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 23
Starting the software 1 Double-click on the desktop to start it. You can also start the software by selecting [Start] → [Panasonic] → [Multi Monitoring & Control Software]. Confirming the software version 1 Select [About] → [Version] from the menu. 2 After checking the version, click [Close - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 24
Installing the Software on the Monitoring and Control Terminal Exiting the software 1 Click on the screen. You can also exit by choosing [File] → [Exit] from the menu. Preparation 24 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 25
Preparation About Licenses This software consists of a monitoring & control function and an early warning function. You can add the early warning function by purchasing a license and activating the software. Monitoring & control function Early warning function (paid) Terminal where run - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 26
About Licenses Preparation Notes • To raise the license tier (and increase the number of registered devices), purchase a 1-year license or 3-year license of a higher tier and activate the software license again. • To continue using the same license tier (with the same number of registered devices) - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 27
this Software Checking whether devices are supported For the devices and peripheral devices compatible with this software, please visit the following websites. https://panasonic.net/cns/projector/download/application/multiprojector/ https://panasonic.net/cns/prodisplays/download/software/multi - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 28
Preparation Setting early warning function Setting the administrator password • To use the early warning function for the 90-day trial period (free of charge), you only need to set the administrator password. (Up to 2,048 devices can be registered.) 1 Click [Early Warning Configurations] tab → [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 29
Setting early warning function Preparation 4 When the success message is displayed, click [OK]. The new password is now set, and the expiration date is displayed in the status bar at the bottom of the screen. 29 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 30
Setting early warning function Preparation Activating Once the trial version expires (after 90 days), you will need to purchase a 1-year or 3-year license and activate it. Prepare the key code of the purchased license Make sure you have the label containing the key code for the purchased license - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 31
not the extension (.LST). (This document assumes the file is named SERIAL.LST.) 4 Once the file is saved, [Your Volume Serial Number.] is displayed for manual entry. Proceed to the next step. • There are two ways to use the exported volume serial number. One is to use the saved SERIAL.LST - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 32
to [PASS] from one of the following websites. https://panasonic.net/cns/projector/pass/ https://panasonic.net/cns/prodisplays/pass/ • If you are not a instructions to upload the volume serial number file (SERIAL.LST). (When [Manual entry →] is selected) Follow the on-screen instructions to manually - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 33
activation method to select it. [By import "Activation Code" file]: Import the ACTIVE.LST file (Go to step 3 in page 34) [By entering "Activation Code"]: Manually enter activation code (Go to step 5 in page 34) 33 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 34
Setting early warning function Preparation (When [By import "Activation Code" file] is selected) 3 Select the ACTIVE.LST file that you saved in step 7 of "Obtaining an activation code" (page 32). 4 Click [Open] to start activation. (When [By entering "Activation Code"] is selected) 5 Enter the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 35
Profile Library, the software must be updated to a version that supports the Device Profile Library update file. • When registering a new device to [PASS] from one of the following websites. https://panasonic.net/cns/projector/pass/ https://panasonic.net/cns/prodisplays/pass/ • If you are not a - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 36
Setting early warning function Preparation Updating the device profile library 1 Start the software. (page 23) 2 Open the [Early Warning Configurations] tab and click [Import of the device setting file]. 3 Click [Yes] in the user account control screen that appears. 4 Select the Device Profile - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 37
Setting early warning function Preparation Logging in from a web browser By logging in to the early warning function (paid) using a web browser, you can monitor the status of devices from a remote location inside the intranet. 1 Start the web browser and enter the following URL. http://xxx.xxx.xxx - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 38
Preparation Uninstalling the software 1 Follow these steps to open the [Programs and Features] window. Windows 10: Type "Control Panel" in the search bar to launch the control panel. From [Uninstall a program], select [Multi Monitoring & Control Software] → [Uninstall]. Windows 8.1: Press [X] while - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 39
Registering a Device to Monitor and Control About the Window window Menu Screen switching tabs Functions are arranged as individual menu items. [Device Monitoring] (page 70), [Monitor on Map] (page 66), [Simple System history] (page 80), [Light ID - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 40
functions, the device will no longer be able to communicate and will need to be re-registered. Registering devices or peripheral devices manually 1 Select (group folder) from the tree pane on the window, right-click it, and select [Create New Device] → [Individual Registration - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 41
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control 2 Enter the [IP Address], [User Name], and [Password] stored in the device you want to register. [IP Address] Carefully enter the IP address assigned to the device you want to register. • - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 42
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control 3 Select the check box of the peripheral device to register, and enter its [IP Address], [User Name], and [Password]. : Network camera : DIGITAL LINK Switcher 4 Click [Create] ( ). • Click [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 43
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control ■■Registering a new peripheral device to a device that has already been registered 1 From the tree pane on the window, select the device to which the peripheral device is - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 44
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control Registering connected devices by Auto Search 1 Select (group folder) from the tree pane on the window, right-click it, and select [Create New Device] → [Auto Search]. • - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 45
for with [Auto search (local network)] are limited to those supporting the proprietary command for search. For devices supporting the Auto search (local network) function, refer to "List of Compatible Device Models" on the Panasonic website ((https://panasonic.net/cns/projector/ download/) or (https - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 46
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control Registering devices by importing a file 1 Select (group folder) from the tree pane on the window, right-click it, and select [Create New Device] → [File(.csv) - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 47
Registering a Device to Monitor and Control Registering Devices and Peripheral Devices to Monitor and Control 3 Select the leftmost check boxes of the devices you want to register and click [Create]. If you want to use the early warning function, also select the [Early Warning registration] check - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 48
used to register in this software the setup information of the projectors registered in "Geometry Manager Pro" which is a software application that supports the geometry correction and installation adjustments of the projectors. It is useful at such times when there is a large number of projectors - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 49
, check the contents and click [OK]. • If importing has failed because the file is damaged, for instance, the message is displayed. Check whether there is problem in the projector registration information file. 49 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 50
Registering a Device to Monitor and Control Changing the Registration Information of a Device or Peripheral Device 1 From the tree pane on the window, select the device whose registration information is to be changed, right-click it, and select [Property]. 2 Change the registered - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 51
processing.] instead. • For flat panel displays that support the fail soft function. For information on the supported functions for each flat panel display, refer to the "List of Compatible Device Models" on the Panasonic website (https://panasonic.net/cns/prodisplays/download/software/). 1 From the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 52
Setting up the Fail Soft Function Registering a Device to Monitor and Control 2 Open the [Early Warning] tab, and select functions by checking them. [Enable hot plug reset processing.]: The video signal is redetected for the selected input. (Normally, you would select this option.) [Enable hot - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 53
a projector. Notes • When you change a device name, this software also changes the device name on the connected device to match. On devices that do not support the device name change function, the name reverts to the original device name even if you try to change it. 53 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 54
Registering a Device to Monitor and Control Creating a Group Use the steps below to manage specific groups of devices, for example by floor or by type. A total of 100 groups can be created. 1 Select (group folder) from the tree pane on the window, right-click it, and select [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 55
Creating a Group Registering a Device to Monitor and Control Moving a group ■■Moving registered devices to a different group 1 Drag the device icon and drop it under the register it. (group folder) where you want to ■■Moving by Group 1 Drag the (group folder) you want to move and drop it in - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 56
Registering a Device to Monitor and Control Creating a Keyword You need to create the keyword first when you want to monitor and control the devices as a keyword unit. 1 Select [File] → [Create New Keyword] from the menu. 2 Enter the [Keyword]. • A character string of your choice of up to 128 single - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 57
Creating a Keyword Registering a Device to Monitor and Control Assigning a Keyword to a Device 1 From the tree pane on the window, select the device you want to assign a keyword to, right-click it, and select [Property]. • Alternatively, you can use the following method. -- - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 58
Creating a Keyword Registering a Device to Monitor and Control 2 Open the [Property] tab, select the keyword you want to assign from [Keyword List], and click . • The keywords that are already set will be shown. • In order to assign multiple keywords, repeat the above process for each keyword. • - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 59
Registering a Device to Monitor and Control Creating Brightness Control Brightness control can be registered to prevent the brightness on the projected screen from being inconsistent between each projector as a result of individual characteristics and time degradation of lamps when, for example, a - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 60
Creating Brightness Control Registering a Device to Monitor and Control Assigning brightness control to a projector 1 From the tree pane on the window, select the projector you want to assign a brightness control to, right-click it, and select [Property]. • Alternatively, you - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 61
Creating Brightness Control Registering a Device to Monitor and Control 2 Open the [Property] tab and select the brightness control you want to assign from [Brightness Control Setting]. • The brightness controls that are already set will be shown. 3 Click [Update] ( ). 4 When the "update - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 62
Registering a Device to Monitor and Control Deleting (a device, group, keyword, or brightness control) 1 From the tree pane of the window, select the icon of the device, group, keyword or brightness control to be deleted, right-click it, and select [Delete]. • Alternatively, you - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 63
Registering a Device to Monitor and Control Updating Device Registration Information If a device with a different model name from the registered device is detected such as when replacing the device already registered with this software with a device with the same IP address, user name and password, - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 64
password, keyword setting, memo, etc., and if there is no problem, click [Update]. 3 Click [Update] updates the device registration information is a model that does not support the brightness control function, or the device to be updated supports brightness control and the brightness control - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 65
is scheduled for the simultaneous image distribution function or the delivered image deletion function, and the device to be updated does not support the simultaneous image distribution function Then the following message is displayed. Clicking [OK] updates the device registration information in the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 66
Registering a Device to Monitor and Control Registering Device Location Information You can arrange registered devices on the map in groups in order to visually check their installation status. You can also select devices from the map to carry out device control or schedule registration. 1 Open the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 67
Registering a Device to Monitor and Control Registering Device Location Information 3 Drag and drop devices from the tree pane onto the map. A list of the placed devices is displayed ( ). • Click [Large] or [Small] ( ) to enlarge or reduce the size of the placed icons. • Devices can be placed inside - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 68
Registering a Device to Monitor and Control Registering Device Location Information Performing device control and scheduling from the map 1 Select the group tab where the devices to be configured were placed. 2 Select the check boxes of the devices and group folders to be configured and click [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 69
Registering a Device to Monitor and Control Registering Device Location Information Displaying the Early Warning function 1 Select a device and click icon ( ). This function displays detailed information about early warnings related to selected devices. • You can select devices from the list or from - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 70
Monitoring Function Brief Information Display The window displays brief information relating to the registered devices as a Group/Keyword/Brightness Control unit. window Tree pane Brief information display pane Icons in the tree pane Device Group Device is - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 71
instead. For details on the models for which this limitation applies, refer to the "List of Compatible Device Models" on the Panasonic website (https://panasonic.net/cns/prodisplays/download/software/). You can view information on all device warnings or errors that have occurred under the [Self Test - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 72
Brief Information Display Monitoring Function Icons in the Brief information display [Device Name]:Displays the projector name (host name) set for each device or displays the display name (host name) set for each flat panel display. [Status]: Displays the status of the device as an icon. ■■ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 73
generated simultaneously, an error icon will be displayed. Refer to operating manual for the relevant device for how to respond to warnings and errors. the "List of Compatible Device Models" on the Panasonic website (https://panasonic.net/cns/prodisplays/ download/software/). You can view - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 74
warning function. Notification information has been detected by the early warning function. [ECO setup level]: The icon is displayed when the device supports the ECO management function (page 143). Green area increases when ECO setting items increase in the ECO management setting of the device. The - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 75
Brief Information Display Monitoring Function [Signage information]: Displays the signage playback status of devices equipped with Content Manager. [IP Address]: Displays the device's IP address. [Lamp/Light device Runtime]: Displays the runtime for the lamp or light device with the longest - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 76
window is updated automatically according to the settings configured in "Setting the Information Updating Interval" (page 190). ■■Manually update device information 1 Select [File] → [Update Information] from the menu. • Alternatively, you can use the following method. --Press - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 77
Brief Information Display Monitoring Function If the number of registered devices increases, then updating the information will take longer. If you wish to abort the update before completion, select [File] → [Abort] from the menu. The above operation changes the status bar on the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 78
Monitoring Function Detailed Information Display 1 From the tree pane on the window, select the device whose detailed information you want to view, right-click it, and select [Property]. • Alternatively, you can use the following method. --Select [File] → [Property] from the menu - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 79
Detailed Information Display Monitoring Function Displayed items The detailed information display shows the information listed in the table below. Item Device Name Manufacturer Model Name Power Shutter (AVMute) Input Source Signal Lamp/Light device Select Lamp/Light device Power Lamp/Light - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 80
Monitoring Function Displaying the Simple System History Information You can display the system history information in a table format. Selecting the [Simple System history] tab in the window allows you to switch to the window. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 81
Displaying the Simple System History Information Monitoring Function Saving the Simple System History Information Perform the following procedure to output the simple system history information to a file. 1 Select [File] → [Save simple system log] from the menu. 2 Set the save destination and - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 82
Displaying the Simple System History Information ■■Example showing saved data The simple system history file describes as following. Monitoring Function Software name Version File save date and time File end indication Device name Manufacturer's name Model name Date and Time when error generation - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 83
Monitoring Function Managing Light IDs You can manage multiple imported Light IDs simultaneously. Selecting the [Light ID Information] tab in the window allows you to switch to the window. window The "Managed ID" and "Expiration date" - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 84
for expired Light IDs. Managed ID is a management number assigned during Light ID distribution. Notes • Light ID information can only be used on Panasonic displays equipped with the Light ID function. For details on models equipped with the Light ID function, refer to the "List of Compatible Device - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 85
the ECO power level monitor display function. For information on the supported functions for each device model, refer to the "List of Compatible Device Models" on the Panasonic website (https://panasonic.net/cns/projector/download/). 1 From the tree pane on the window, select - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 86
Displaying the ECO Power Level Monitor Monitoring Function 2 When acquisition of the log is completed, the ECO power level monitor is displayed. [ECO Power Level] tab [Runtime] tab 86 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 87
SETUP] → [ECO MANAGEMENT] → [LIGHT POWER] and [AUTO POWER SAVE] in the on-screen menu of each projector. For details, refer to the instruction manual for each projector. • Graphs displayed by the ECO power level monitor show data collected every day. The ECO management settings of a projector - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 88
Displaying the ECO Power Level Monitor ■■Example showing saved data Data is saved as follows: Monitoring Function Software name Version File save date and time Device name Model name IP address Data save date ECO power level (0 to 10) Device runtime (mins) 88 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 89
controlled by this software in the form of files. When a problem occurs, you can give these log files to the serviceman who can use on the supported functions for each device model, refer to the "List of Compatible Device Models" on the Panasonic website (https://panasonic.net/cns/ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 90
Saving a Maintenance Log Monitoring Function 2 A confirmation message will be displayed. Perform the operation in accordance with the information in the message. • When you click [Yes], maintenance log retrieval begins. To cancel retrieval of the maintenance log, click [No]. 3 Select a folder in - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 91
Monitoring Function 4 When the confirmation message is displayed, click [OK]. Notes • Maintenance logs are saved in binary format. • Maintenance log information can be checked by service personnel only. • Maintenance logs are recorded only on devices that support them. 91 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 92
Monitoring Function Saving the Information of a Registered Device You can export all information of a registered device to a CSV file. To export device information, follow the following steps. 1 Select [File] → [Save Registration Device] from the menu. 2 Set the save destination and file name, and - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 93
Saving the Information of a Registered Device Monitoring Function ■■Example showing saved data The following descriptions are saved in the registered device information file. Software name Version File save date and time Description Items: Device Name Group Status (Current status, error/warning - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 94
Saving the Information of a Registered Device Monitoring Function Importing Device Registration Information Export data created using this software can be imported. This function is useful for transferring settings information from another computer that this software is installed. 1 Select [File] - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 95
Saving the Information of a Registered Device Monitoring Function 3 A confirmation dialog will be displayed. Perform the operation in accordance with the information in the message. • Click [Yes] to start importing. 4 When the "imported data successfully" message appears, click [OK]. • This - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 96
Saving the Information of a Registered Device Monitoring Function Exporting Device Registration Information Devices, groups, keywords, brightness control, schedules, and setting information that are set up in this software can be exported to a file. This function is useful when transferring - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 97
Saving the Information of a Registered Device Monitoring Function 3 When the "export successful" message appears, click [OK]. A folder containing the export data is created at the designated export destination and named according to the date and time of export. Example: Name of data folder if - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 98
Controlling Devices Executing a Control Command Devices can be controlled on an individual device basis, or on the basis of group, keyword, or brightness control. Attention • When turning the projector on, take care to ensure that light from the light source cannot enter the eyes of people near the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 99
Schedule Acquisition and Delivery Functions". *2 [Command Input] only works on devices that support the "Command Transmission Function". *3 Panasonic displays (such as projectors and flat panel displays) supporting PJLink can perform the operations that use the PJLink command. • You can execute - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 100
Executing a Control Command Controlling Devices ■■Registering and transmitting commands (maximum 20) 1 Click [Register command] for [Command Input]. 2 Enter the command you want to register. • If you read in command information (CSV format) (page 102) using [Read File] ( ), you can then select - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 101
Executing a Control Command Controlling Devices ■■Creating and transmitting command list (maximum 100) 1 Click [Create command list] for [Command Input]. 2 Add an input line with [Add line] ( ), and enter a command. • If you read in a command list (CSV format) (page 102) using [Read file] ( ), - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 102
Executing a Control Command Controlling Devices ■■Creating command information Use [Register command] to create command information conforming to the following conditions that can be read into the software. • File format: CSV • The maximum number of commands that can be read in is 20. • The - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 103
Executing a Control Command Controlling Devices ■■Combinations of [PJLink Control] and [Status] [PJLink Control] [Power] [Input RGB] [Input VIDEO] [Status] Combination result [OFF] Power OFF [ON] Power ON [1] Switching to the RGB input that corresponds to parameter "11" of the PJLink input - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 104
Executing a Control Command Controlling Devices [PJLink Control] [Input DIGITAL] [Input STORAGE] [Status] Combination result [1] Switching to the DIGITAL input that corresponds to parameter "31" of the PJLink input switching command INPT. [2] Switching to the DIGITAL input that corresponds - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 105
) ON [OFF] AV mute (audio only) OFF [ON] AV mute (video and audio) ON/shutter closed [OFF] AV mute (video and audio) OFF/shutter open * Panasonic devices are not currently supported. 105 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 106
and set [Light ID] to [External Control] of your device for control. *2 Refer to the instruction manual and set [Light ID] to [Internal ID] of your device for control. Notes • For the supported functions for each device model, refer to the "List of Compatible Device Models" on one of the following - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 107
Executing a Control Command Controlling Devices Saving or Deleting the Log You can save and delete the log information displayed in the log pane. Notes • Up to 10,000 log entries can be saved. Once 10,000 log entries are reached, old log entries are deleted to make room for new ones. 1 Right-click - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 108
Controlling Devices Scheduling Function 1 From the tree pane of the window, select the icon for the device, group, or device-registered keyword or brightness control group whose schedule is to be set, right-click it, and select [Schedule]. • Alternatively, you can use the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 109
starts. • Up to 100 schedules can be set. • To see if the equipment being used supports a particular control function, see the "List of Compatible Device Models" on the following websites. https://panasonic.net/cns/projector/download/ https://panasonic.net/cns/prodisplays/download/software/ 109 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 110
Scheduling Function Controlling Devices Checking schedules that have been set up You can view a list of the schedules that have been set up. 1 Select [Options] → [All Schedule List] from the menu. • If there are overlapping schedules for a specified device, its lines will be indicated in red. If - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 111
Controlling Devices Controlling Devices by Selecting Commands to be Sent ([Operation Settings]) ■■Configuration by specifying a date and time in [Schedule] 1 Select the icon for the desired device, group, or keyword from the tree pane of the window, right-click it, and select [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 112
that can be set and the periods for disabling command reception vary depending on the device you are using. For details, refer to the instruction manual for your device. ■■Configuration by specifying a date and time in [Schedule] 1 Select the icon for the desired device, group, or keyword from the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 113
type JPEG format and BMP format image files that the OS gives standard support (extension: .jpg/.jpeg/.bmp) Deliverable image size Up to 4,096 input to "Panasonic APPLICATION". Then, perform the simultaneous image distribution again. • If [Display option] → [Onscreen display] → [Input guide] is set - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 114
Controlling Devices Delivering/Deleting Images ([Simultaneous image distribution] / [Distribution image deletion]) • In some models, when the setting of [No signal auto off] is enabled in the device menu, the power supply to the device is turned off if the time set in [No signal auto off] has - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 115
Controlling Devices Delivering/Deleting Images ([Simultaneous image distribution] / [Distribution image deletion]) [Simultaneous image distribution] ■■Configuration by specifying a date and time in [Schedule] 1 Select the icon for the desired device, group, or keyword from the tree pane of the < - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 116
When you click [OK], the following message appears. If there is no problem switching to NETWORK or Panasonic APPLICATION input forcefully when the schedule is executed, apply the schedule by clicking [Yes]. If the display aspect of a device, check the operation manual of the device you use. 116 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 117
Controlling Devices Delivering/Deleting Images ([Simultaneous image distribution] / [Distribution image deletion]) ■■Executing directly from the menu You can set [Simultaneous image distribution] directly from the menu without setting the execution date and time in the schedule. 1 From the tree pane - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 118
When you click [Distribution] ( ), the following message appears. If there is no problem switching to NETWORK or Panasonic APPLICATION input forcefully, execute the image delivery by clicking [Yes]. If there is a problem, cancel the image delivery by clicking [No]. Notes • When turning the projector - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 119
of the week) and then set [Time]. 4 When you click [OK], the following message appears. Apply the schedule by clicking [Yes] if there is no problem switching to NETWORK or Panasonic APPLICATION input forcefully when the schedule is executed. If there is - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 120
, or keyword, right-click it, and select [Distribution image deletion]. 2 The following message is displayed. If there is no problem switching to NETWORK or Panasonic APPLICATION input forcefully, execute the deletion of the delivered image by clicking [Yes]. To cancel the deletion of the delivered - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 121
Controlling Devices Delivering/Deleting Images ([Simultaneous image distribution] / [Distribution image deletion]) Checking the image distribution/image deletion execution status When you execute [Simultaneous image distribution] or [Distribution image deletion], the setting status will be displayed - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 122
as SD memory cards, used by projectors. Notes • To see if a device being used supports [Interrupting delivery], see the "List of Compatible Device Models" on the following website. https://panasonic.net/cns/projector/download/ ■■Types of content files that can be delivered Still images Extension - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 123
Controlling Devices Delivering Images by Interruption during Signage Playback ([Interrupting delivery]) ■■Configuration by specifying a date and time in [Schedule] 1 Select the icon for the desired projector, group, or keyword from the tree pane of the window, right-click it, and - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 124
Controlling Devices Delivering Images by Interruption during Signage Playback ([Interrupting delivery]) 5 Set the playback method. ( ) [Delivering contents only]: Select this check box to copy a file stored on the computer to an SD memory card or similar memory device inserted in the projectors. (If - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 125
Controlling Devices Delivering Images by Interruption during Signage Playback ([Interrupting delivery]) ■■Configuration directly from the menu You can set [Interrupting delivery] directly from the menu without setting the execution date and time in the schedule. 1 From the tree pane of the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 126
To see if a device being used supports [Brightness Control], see the "List of Compatible Device Models" on the following website. https://panasonic.net/cns/projector/download/ An illustration of the brightness of the projector, please refer to the operating manual for the projector being used. 126 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 127
execution date and time in the schedule. 1 From the tree pane of the window, select a brightness control icon, right-click it, and select [Manual Brightness Control]. 127 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 128
Controlling Devices Adjusting Brightness on a per-Screen Basis ([Brightness Control]) Checking the progress status of brightness control When the brightness control is executed, the status bar at the bottom of the screen changes from [Ready] to [Brightness Control is being executed.] and a progress - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 129
being used supports [Delivering contents], see the "List of Compatible Device Models" on the following websites. https://panasonic.net/cns/prodisplays/download/software/ https://panasonic.net/cns/projector/download/ • For details on the USB media player function, refer to the instruction manual for - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 130
contents]) ■■Types of content files that can be delivered Still images Extension Format jpg jpeg JPEG jpe bmp Bitmap Restrictions*1 ○: Support ×: Not support Projector Flat panel display Maximum number of pixels: 4,096 × 4,096 ○ ○ YUV format: Only YUV444, YUV422, and YUV411 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 131
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) Creating and editing content lists 1 Click [Content list editing]. • From the tree pane of the window, select the icon for a device, group, or keyword, right-click it, and select [Content - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 132
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) 3 Click [Add] and select the content to be played back. The file selection window appears. Select the content file to register to the play list and then click [Open]. (Multiple files can be selected by - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 133
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) 5 Enter the playback duration for each content file under [Playback time (sec)] in the [Play list]. A playback time within the range of 3 to 86,400 seconds (equivalent to 24 hours) can be set. • In the case of - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 134
take a while depending on the animation effects and number of slides. Preparation: • Make sure Microsoft PowerPoint is installed on your computer. • Supported versions: Microsoft PowerPoint 2010/2013 1 Click [Content list editing]. • From the tree pane of the window, select the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 135
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) 3 Click [Select], and select the PowerPoint file. The first image of the selected PowerPoint slide is displayed in . • If you select [New/Edit] ( ) after selecting a file, the selected file will open in - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 136
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) Delivering a content list The content list delivery setting can be made from either the schedule setting screen or directly from the menu. ■■Configuration from the schedule setting screen 1 From the tree pane - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 137
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) 6 If you selected [Multi-Playback] in step 4, set the [Parent] and [Group No]. • The [Group No] setting is identical to the group ID used to classify networks when using USB media players in Multi Media Player - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 138
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) ■■Configuration directly from the menu 1 From the tree pane of the window, select the icon for a device, group, or keyword, right-click it, and select [Content list editing and delivery]. 2 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 139
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) 3 Select the [Playback mode setting]. [Single-Playback]: [Multi-Playback]: For playback on a single projector or a single flat panel display For starting playback simultaneously on multiple flat panel - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 140
Controlling Devices Creating Distribution List to Distribute Image ([Delivering contents]) Notes • It may take a while for delivery to complete depending on the sizes of the content files. • The functions set in [POWER MANAGEMENT SETTINGS] of the flat panel display are disabled during content list - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 141
with the Light ID function. • To see if a device being used supports Light ID Control, see the "List of Compatible Device Models" on the following websites. https://panasonic.net/cns/projector/download/ https://panasonic.net/cns/prodisplays/download/software/ • For details on purchasing a Light ID - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 142
the device you want to display and click [WEB Control]. (page 152) Notes • For details about the web control function, please refer to the operating manual for the device being used. • The window will vary according to the device being used. • When the web control function is opened - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 143
the setting window will be different depending on the projector you are using. Notes • For details of the ECO Management function, refer to the operation manual of the device you are using. 143 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 144
called only on devices that display the signage playback status in [Signage information]. Notes • For details about "Content Manager" after login, refer to the operating manual of the projector you are using. 144 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 145
only on projectors equipped with Content Manager. To see if the projector being used supports these functions, see the "List of Compatible Device Models" on the following website. https://panasonic.net/cns/projector/download/ Acquiring a Signage Schedule 1 In the Brief information display area in - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 146
Acquiring and Delivering a Signage Schedule Controlling Devices 3 Place a check mark in [Select] for the signage schedule you want to acquire and click [Acquisition]. • Because the contents (video or audio) registered in the schedule are also acquired, acquisition may take some time to complete, - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 147
Acquiring and Delivering a Signage Schedule Controlling Devices Delivering a Signage Schedule 1 In the Brief information display area in the window, select a projector, right-click it, and select [Delivering signage schedule]. 2 Place a check mark in [Select] for the signage - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 148
Acquiring and Delivering a Signage Schedule Controlling Devices 3 Click [Delivery]. The selected signage schedule will be delivered. • If a file with the same name as the contents, registered in the schedule, for delivery already exists on the delivery destination, the destination file will be - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 149
Using the Early Warning Function (paid) Confirming the Status of Devices and Peripheral Devices If you add the early warning function, you can check the status of the devices and their peripheral devices registered on the monitoring and control terminal from the Multi Monitoring & Control area or - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 150
Using the Early Warning Function (paid) Confirming the Status of Devices and Peripheral Devices Tree View Area Unread information Status notification tab When there are unread status notification ( ), will turn red and the number of unread messages will be displayed. • When you click this, the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 151
Using the Early Warning Function (paid) Confirming the Status of Devices and Peripheral Devices Tree pane [Group]: This is the folder that the tree is composed from. It cannot be changed or deleted. : Projector (Rich information model) : Device group folder created on the monitoring and control - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 152
Using the Early Warning Function (paid) Confirming Device and Peripheral Device Status (Detail Screen) Data Display Area 1 Select a device in the tree view area and select the [Status] tab. The status (condition) of the selected device appears in the data display area. 152 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 153
Using the Early Warning Function (paid) Confirming Device and Peripheral Device Status (Detail Screen) Device name Displays the device name. [Group Name] Displays the name of the group where the device is registered. [Model Name] Displays the device model name. [Power] Displays the power - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 154
window will not appear for Basic information model devices and devices that do not support web control. Displays a graph that shows the power on hours for a device from white to red, and the status changes from "Good" to "Service". For flat-panel displays, if the temperature rises and the fan speed - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 155
signal conditions are not possible for flat-panel displays that support USB input. • When USB input is selected and a on the camera. Refer to the instruction manual of the corresponding network camera and https://panasonic.net/cns/projector/download/application/multiprojector/ https://panasonic.net/ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 156
Using the Early Warning Function (paid) Confirming Device and Peripheral Device Status (Detail Screen) ■■DIGITAL LINK Switcher input/output condition Clicking [Peripheral Device] in the data display area and then clicking [DIGITAL LINK] will display the input/output condition and the built-in fan - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 157
, the color of the box of the DIGITAL LINK Switcher changes and a message is displayed to notify you of the status. When there is no problem with the fan, the box is displayed in gray as shown in . Message display area Close button Condition display when the fan Condition display when - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 158
Using the Early Warning Function (paid) Confirming Device and Peripheral Device Status (Detail Screen) Notes • The following messages may be displayed in the message area depending on the settings of the DIGITAL LINK Switcher. DIGITAL LINK Switcher Settings CLOSED CAPTION setting is "ON" [INPUT - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 159
Using the Early Warning Function (paid) Displaying a List of Registered Devices (Overview screen) 1 Click [Detailed/Overview] to switch to the Overview screen. A list of registered devices appears. • Click [Detailed/Overview] again to return to the [Detail Screen]. [Refresh] The data display area - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 160
Using the Early Warning Function (paid) Displaying a List of Registered Devices (Overview screen) Saving Device Management Information Use this procedure to save management information for all registered devices as a CSV-format file. 1 Click [Detailed/Overview] to switch to the Overview screen. 2 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 161
Using the Early Warning Function (paid) Displaying a List of Registered Devices (Overview screen) Displaying or Saving a Maintenance Report Use this procedure to display or save maintenance information for registered devices by specifying the items to display, interval, and cycle count. Preparation: - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 162
Using the Early Warning Function (paid) Displaying a List of Registered Devices (Overview screen) Items: [List of Devices which require Consumable Parts Replacement soon] [List of Devices which require Regular Periodic Cleaning soon] [List of Devices which require Non-Consumable Parts Replacement - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 163
Using the Early Warning Function (paid) Displaying a List of Registered Devices (Overview screen) ■■Example showing saved data Application Name,Early Warning Version,Ver.*.*.* Stored,**/**/**** 8:12:55 PM < List of Devices which require Consumable Parts Replacement soon Lamp1 ----------Emergency, - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 164
Using the Early Warning Function (paid) Confirming Device History Information ([History (All Device)]) The status information (errors, warnings and notifications) and history for all devices registered in the monitoring and control terminal are displayed. • History information is saved as a - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 165
Using the Early Warning Function (paid) Confirming Device History Information ([History (All Device)]) [Result]: If it is detected that video has stopped, a video stop detection notification is displayed in the [Notice] column and a [Result] button to the right of it. Click the button to check the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 166
Using the Early Warning Function (paid) Confirming Device History Information ([History (All Device)]) Saving History Information 1 Click [History (All Device)] to display the history screen. 2 Click [Save History]. The history information is saved as a compressed CSV file. ■■Example showing saved - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 167
Using the Early Warning Function (paid) Controlling Devices ([Control]) You can perform off/on controls for the power, shutter function, and AV muting function on registered devices individually or by groups. • Functions other than these should be controlled from the software side on the monitoring - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 168
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details Use the steps below to display detailed information on the events a device reports (error, warning or notification details) and measures to handle them. 1 Click [Detailed/Overview] to display the detail screen and - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 169
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details ■■Overview of screen Device information: [Group Name] [Device Name] [IP Address] [Model Name] [Serial Number] Displays the group name of a device. Displays the device name. Displays the device's IP address. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 170
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details Using a Network Camera to Detect the Presence of an Output Image You can install a network camera for video surveillance of a device and use it to receive notification when the video display is interrupted. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 171
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details 3 Click [Change peripheral device]. 4 Select the check box [Make video stop determination] ( ) and click [Create] ( ) → [Video stop determination setting]. 171 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 172
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details 5 Configure detection of interruption of output image. Detection area rectangle setting Displays video from the registered network camera. Move the dots "●" at the four corners of the camera image to set the area - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 173
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details Display notifications on the monitoring and control functions Upon notification that the image output has stopped, an icon is displayed in the information display area for the corresponding device. Confirm the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 174
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details 3 View the notification details. • Depending on the network connection status, it may take some time to display. • Click to close the video status confirmation screen. Notes • The continuous display of a still image - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 175
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details Confirming Errors, Warnings and Notification History Use the steps below to display the history of error, warnings and notifications and when they occurred for a registered device. 1 Click [Detailed/Overview] to - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 176
Edge. • The system log (log file) is saved in binary format. • System log information can be checked by service personnel only. • System logs (log files) are acquired only on devices that support them. • If you are browsing on a tablet or iPhone, [Save] is disabled. • Although the message field may - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 177
Using the Early Warning Function (paid) Displaying Error/Warning and Notice Details ■■Example showing saved data --Projector example Date of Notice 2:26:23 PM Projector Information : Group Name : Group Projector Name : DZ21K-0001 IP Address Model Name : DZ21K Serial Number : AB1234567 Main Ver - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 178
Using the Early Warning Function (paid) Checking the Maintenance Timing The software records the operating status and operating hours of registered devices to predict roughly when consumable parts replacement, regular periodic cleaning and non-consumable parts replacement will be required. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 179
Checking the Maintenance Timing ■■About the screen display Using the Early Warning Function (paid) [Average Daily hours of Operation]: Uses the past power on hours for a device to calculate and display daily average usage time. • Data for a minimum of seven days of operation is required to - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 180
Checking the Maintenance Timing Using the Early Warning Function (paid) [Regular Periodic Cleaning]: Displays maintenance information indicating when parts should be cleaned. Part name The names of parts that need to be cleaned and a graph showing power on hours appear. The state of the part can - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 181
Checking the Maintenance Timing Using the Early Warning Function (paid) Configuring Maintenance Cycle Settings You can configure the length of time after which consumable parts replacement, parts cleaning, and regular parts replacement should be performed (maintenance cycles) for registered - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 182
Checking the Maintenance Timing Using the Early Warning Function (paid) ■■For Rich information model devices When a device is registered as a Rich information model, the maintenance items and maintenance cycles for that device are displayed. • Change the maintenance cycle settings as necessary. • - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 183
Checking the Maintenance Timing Using the Early Warning Function (paid) ■■For Basic information model devices When a device is registered as a Basic information model, you must select the maintenance cycle items for which you want to configure settings before configuring them. The following - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 184
determining when parts replacement and cleaning will be necessary. They are intended to be used as a guide. • Projectors equipped with five or more light sources are not supported. • When a Basic information model becomes recognized as a Rich information model by updating the Device Profile Library - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 185
Using the Early Warning Function (paid) Confirming Device Temperature Information Information from a registered device's built-in temperature sensor can be collected, and the changes in the device's internal temperature can be displayed as a graph. 1 Click [Detailed/Overview] to display the detail - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 186
Temperature Information Histories The temperature information collected for the past 30 days are graphically displayed so that you can check for problems with the installation environment, etc. of the device. 1 Display the [Temperature Info] tab and click [History]. (page 185) Temperature unit - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 187
is displayed in a graph. By monitoring temperature information for a device during operation or events, you can react promptly to signs of problems. 1 Display the [Temperature Info] tab and click [Live]. (page 185) • The following message appears when displaying the temperature monitoring screen for - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 188
Using the Early Warning Function (paid) Confirming Device Temperature Information Temperature unit: Allows you to switch the temperature unit of the graph display between Fahrenheit or Celsius. Temperature range: Allows you to specify the upper and lower limits of the graph display within the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 189
Setting Options for the Monitoring and Control Functions You can make various settings related to this software. 1 Select [Options] → [Setting] from the menu. 2 After the window is displayed, select the tab corresponding to the setting you wish to change and configure the setting as - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 190
Setting Options for the Monitoring and Control Functions Setting the Information Updating Interval Information regarding devices being monitored/controlled can be updated at regular intervals. 1 Click the [General] tab. 2 Enter the desired time interval in the [Interval Time] field. The time - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 191
Setting Options for the Monitoring and Control Functions Setting the Number of System History Entries that can be Saved Use the following steps to set the number of system history entries (page 164) that can be saved. 1 Click the [General] tab. 2 Set [System log entry save count]. From the pull-down - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 192
Setting Options for the Monitoring and Control Functions Setting the Number of System History Entries that can be Saved Deleting the System History Information Use the steps below to delete saved system history data. 1 Click the [General] tab. 2 Click [Delete system log] ( ). Click [Yes] in the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 193
Setting Options for the Monitoring and Control Functions Setting the Port Number for Command Control Set the port number for the command control to be used in communication with the device. 1 Click the [General] tab. 2 Enter the port number for command control in . • If there is a port number - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 194
Web Control> window, please refer to the operating manual for the device being used. • It is support the status notification function. For information on the supported functions for each flat panel display, refer to the "List of Compatible Device Models" on the Panasonic website (https://panasonic - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 195
Setting Options for the Monitoring and Control Functions Changing the Information Displayed on the Information Display Windows Information displayed on the Detailed Information Display and Brief Information Display, and the sequence in which it is displayed, can be changed as follows. 1 Select the [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 196
Setting up the Early Warning Function (paid) The settings for the early warning function (paid) are configured on the monitoring and control terminal. 1 From the [Early Warning Configurations] tab, click [Others]. For how to configure each setting, see the following pages. • [SNMP] (page 197) • [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 197
Setting up the Early Warning Function (paid) Setting SNMP Notifications When an SNMP manager is installed on the same network as the monitoring and control terminal, this software can use SNMP traps to report the error, warnings and notifications that a device causes. Types of SNMP traps that are - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 198
Setting SNMP Notifications Setting up the Early Warning Function (paid) 2 Select the [Notify by SNMP Trap] check box and configure the settings required for SNMP notifications. [SNMP Manager IP Address]: Enter the IP address. [SNMP Manager Host Name]: Enter the host name. [SNMP Community Name]: E - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 199
used for sending SNMP traps can be acquired as follows. Log in to PASS from one of the following websites. https://panasonic.net/cns/projector/pass/ https://panasonic.net/cns/prodisplays/pass/ Click [Download] from the side menu. Click Select Utility Software → Early Warning Software → [MIB]. Click - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 200
Setting up the Early Warning Function (paid) Configuring the Required Settings for Sending Mail Use the steps below to send data on errors, warnings and notifications caused by a device via mail to an E-mail address specified by this software. 1 Select the [Others] tab (page 196), and then click [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 201
Setting up the Early Warning Function (paid) Configuring the Required Settings for Sending Mail 3 To make an authentication server setting, click [Authentication server settings]. The Authentication Server Setting area appears. Select the authentication method for sending mail. • Go to step 4 if you - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 202
[Test Mail] to send a test mail. • Send a test email to the destination email addresses you entered in step 4. Test mail example: Subject: Panasonic Device Report (Test) Body: This is a test mail from Early Warning Software. 8 Click [Update]. A message indicating that the update was successful - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 203
Setting up the Early Warning Function (paid) Configuring the Required Settings for Sending Mail ■■Example of Mail Transmission Mail subject: Panasonic Device Report (Error/Warning/Information) o Shipping date: June 7, 2013, 10:55:38 Device Information: Group Name: Group Device Name: DZ21K IP - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 204
Setting up the Early Warning Function (paid) Setting a Warning to Report that a Device is Not Connected Use the steps below to output a warning to notify when for some reason a device is not connected to the network. A warning is output when connection with a device cannot be confirmed after a - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 205
Setting up the Early Warning Function (paid) Setting a Warning to Report that a Device is Not Connected 3 Select the [Avoid warning even if device is not found in network during following days and time.] check box, and configure the settings to disable disconnection warnings at certain times. • To - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 206
Setting up the Early Warning Function (paid) Updating Notification Data Use the following steps to set the number of days remaining until a consumable parts replacement, regular periodic cleaning and non-consumable parts replacement are announced and to make settings to send notifications via mail - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 207
Updating Notification Data Setting up the Early Warning Function (paid) 3 In [Notify by SNMP Trap] ( ), select the notifications to be performed by SNMP, and in [Notify by E-Mail] ( ), select the notifications to be performed by mail. 4 To provide notification of continuous running, select the [ - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 208
Setting up the Early Warning Function (paid) Registering, Deleting and Changing User Account Control Use the steps below to perform the user management for logging in to the early warning function from a web browser. Registering a user 1 Select the [Others] tab (page 196), and then click [User - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 209
Setting up the Early Warning Function (paid) Registering, Deleting and Changing User Account Control 3 Enter the user information. [User Name]: Enter the login user ID. (Up to 64 single-byte alphanumeric characters) [Account Type]: S elect [Administrative User] for users who are to be assigned - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 210
Setting up the Early Warning Function (paid) Registering, Deleting and Changing User Account Control ■■Changing the Registered Information 1 Click [Update] in the [User accounts]. 2 Change user account control. • The [User Name] cannot be changed. • [Password] and [Confirm Password] are not echoed - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 211
Setting up the Early Warning Function (paid) Registering, Deleting and Changing User Account Control ■■Deleting a User 1 Click [Delete] in the [User accounts]. 2 When the confirmation message is displayed, click [OK]. The user is now deleted from user accounts. • Click [Cancel] if you decide not to - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 212
) or communication is not possible in the determination conditions. : Check to include no-signal zones in the determination conditions for devices supporting no-signal detection. 3 Click [Update]. A message indicating that the update was successful appears. Click [OK] to update the settings. 212 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 213
Other Questions & Answers Error Messages Errors relating to the multi monitoring and control functions ■■Cannot register a device Message 2048 devices have already been registered. Create Device Failed.Confirm IP Address, User Name and Password. Create Device Failed.Cannot connect with the - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 214
make sure the device has enough memory. Content list copy failed. Confirm the connection with the device and make sure there are no problems communicating with it. In addition, make sure the device has enough memory. The PowerPoint® presentation software has Make sure the PowerPoint® presentation - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 215
control to "PC". Make sure that models that do not support brightness control are excluded from the brightness control group. If . Confirm the connection with the device and make sure there are no problems communicating with it. It is not possible to save more than 32 was entered manually. 215 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 216
Error Messages Other Questions & Answers ■■Issues with licenses or user accounts Message Remedy Software License has expired. Software License renewal required. Software License is required for further use. Please contact your dealer. The license for the early warning function has expired. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 217
Error Messages Other Questions & Answers ■■Output stopped video detection by camera Message Remedy The No Image Determination time is invalid. Set the time to a value between 1 minute and 10 minutes. The video stop determination setting count is already the maximum value of 32. It is not - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 218
Panasonic APPLICATION", and then try the simultaneous image distribution again. Light ID signals are not transmitted from the device Settings must be configured on the device side to transmit Light IDs. • For details on the settings, refer to the operating manual problem persists after quitting PowerPoint, - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 219
will not launch. Is Early Warning Software not running? • In order to launch the software, the state of the "Early Warning Software" service must be "Running". 1. (Windows 10) Right-click [Start] button and select [Computer Management]. (Windows 8.1 / Windows 7) Click [Start] button, right-click - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 220
Frequently Asked Questions Other Questions & Answers Is IIS (Internet Information Services) correctly configured? 1. (Windows 10) Type "Control Panel" in the search bar to launch the control panel. (Windows 8.1) Press [X] while holding down the [Windows logo] key - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 221
]. 4. (Windows 10 / Windows 8.1) For the following three functions, confirm that the settings for each item are as shown below, then click [OK]. [.NET Framework 4.7 Advanced Services] [Windows Process Activation - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 222
Frequently Asked Questions [Internet Information Services] Other Questions & Answers 222 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 223
Frequently Asked Questions Other Questions & Answers (Windows 7) For the following two functions, confirm that the settings for each item are as shown below, then click [OK]. [Internet Information Services] 223 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 224
Frequently Asked Questions [Windows Process Activation Service] Other Questions & Answers Cannot install the software under Windows 8.1 or Windows 10 Is Microsoft .NET Framework 3.5 installed on your computer? • To install the software under - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 225
Frequently Asked Questions 2. Select [Programs] in the Control Panel. Other Questions & Answers 3. Click [Programs and Features] → [Turn Windows features on or off]. 4. Select the ".NET Framework 3.5 (includes .NET 2.0 and 3.0)" check box and click [OK]. 225 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 226
Frequently Asked Questions Other Questions & Answers 5. The required files are located and Microsoft .NET Framework 3.5 is installed. 6. If the files required for installing Microsoft .NET Framework 3.5 are not on your computer, a screen like the one shown below appears. Select [Download files - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 227
access it. Click [OK] to continue an uninstall or update procedure. Although uninstalling the software will also remove the desktop shortcut icons, please manually delete the shortcut icons when you start up the computer next time as they will be regenerated. No connection can be made between my - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 228
Frequently Asked Questions Other Questions & Answers 3. (Windows 10 /Windows 8.1) Click [System and Security] → [Windows Defender Firewall] → [Allow an app through Windows Firewall]. (Windows 7) Click [System and Security] → [Windows Firewall] → [Allow a program through Windows Firewall]. 4. - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 229
& Answers 6. Select [PJMC.exe] and click [Open] ( ). If you do not specify a different destination, the software is installed in the following location. C:\Program Files (x86)\Panasonic\Early Warning Software 7. Select [Multi Monitoring & Control Software Ver.XX] and click [Add] ( ). 229 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 230
the application has already been installed.) If this occurs, firewall settings must be changed in order to allow connection to the network. • See the User's Manuals for all applications containing firewalls to perform these settings. 230 - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 231
indicated in these operating instructions. Notes: • Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited. • Please note that we do not accept any responsibility for any result of using this software or this manual. • Panasonic reserves the right - Panasonic TH-55LF80 | Multi Monitoring and Control Software Operating Instructio - Page 232
Web Site : https://panasonic.net/cns/projector/ https://panasonic.net/cns/prodisplays/ 2018 W1117KZ3088 -PB
Operating Instructions
Multi Monitoring & Control Software
Multi Monitoring & Control Software 2.1
Windows
Thank you for purchasing this Panasonic product.
■
Before using this software, please read the instructions carefully.
DPQP1198ZC/X1