Panasonic WJ-ND300A/10000V Spec Sheet

Panasonic WJ-ND300A/10000V Manual

Panasonic WJ-ND300A/10000V manual content summary:

  • Panasonic WJ-ND300A/10000V | Spec Sheet - Page 1
    is also possible. • Quick IP Setup for Panasonic i-Pro series network cameras • Bandwidth control: 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited • Up to 8 clients can monitor images and control WJ-ND300A simultaneously. • Image transfer to FTP server: Recorded
  • Panasonic WJ-ND300A/10000V | Spec Sheet - Page 2
    -232C For servicing purpose only HDD Type 1x 3.5 inch 250 GB HDD (Factory default), Up to 4x 2 TB HDDs can be installed. (Contact Panasonic for detail) Maximum Capacity 56 TB (with 6x WJ-HDE300 Extension Units, 4x 2 TB HDDs installed in each unit) RAID RAID5 supported (with WJ-NDB301 RAID5
  • 1
  • 2

Network Disk Recorder with expandable capacity for
digital image data from up to 32 Network Cameras
Key Features
Optional Accessories
RAID5 Board
WJ-NDB301
Standard Accessories
• CD-ROM*
......................................
1 pc.
• Installation Guide
..........................
1 pc.
The followings are for installation:
• Power Cord (NTSC model)
...........
1 pc.
• Power Cord (PAL model)
............
2 pcs.
• Rack Mount Bracket
...................
2 pcs.
Rack Mount Bracket Fixing Screw
... 4 pcs.
• Hard Disk Drive Fixing Screw
(w/sleeve and damper)
..............
12 pcs.
* The CD-ROM contains the operating
instructions (PDFs) and the setup tools
(Panasonic IP setup software, etc.).
• H.264, MPEG-4 and JPEG multi format
• Up to 32 network cameras can be connected and recorded.
• Various Recording Modes: Manual, Schedule, Event (Pre/Post),
Emergency, External Timer
• Various alarm sources include 16x Terminal inputs, 16x Camera
alarms, Panasonic Alarm Protocol. Flexible alarm actions include
Alarm recording, E-mail notification, Alarm message, Camera
positioning, FTP image transfer, Terminal output, Panasonic alarm
protocol output, Buzzer and Indicator.
• Panasonic Camera Control: Pan/Tilt, Zoom, Focus, Brightness,
Preset Position, Auto mode (depending on camera model).
• Cameras may be assigned to one of the 8 groups to meet
application requirements.
Flexible Playback Controls: A-B Repeat, Goto Date (Jump to specific
time/date), Goto Last (Jump to 5 sec. ~ 5 min. before the record end).
• Various Display Modes: Spot, Quad (8 patterns), Spot Sequence,
Quad Sequence.
• 8 Quad screens are fully programmable. Any of the 32 cameras can
be assigned to any area of the Quad screens.
• Filtered Search: Time & Date, Event Type, Camera number, Text
• Recorded images can be downloaded to a PC.
• Downloadable viewer software allows playback of images
downloaded from the Recorder.
• 2 setup modes available, Quick/Advanced at users’ preference.
• 2 built-in network interfaces (10Base-T/100Base-TX) for camera
access and client access. Operation by one port is also possible.
• Quick IP Setup for Panasonic
i-Pro
series network cameras
• Bandwidth control: 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M /
5 M / 10 M (bps) and unlimited
Up to 8 clients can monitor images and control WJ-ND300A simultaneously.
• Image transfer to FTP server: Recorded image upon alarm and/or
live image periodically
• Performance measurement function for appropriate recording frame
rate setup
• Images recorded on the SD memory card in the
i-Pro
series
cameras can be downloaded to the recorder manually. In addition,
recordings upon network failure can be transferred automatically
when the recorder is in non-recording status.
• Alarm notification by e-mail.
• User/Host authentication, 4 user levels and User-Camera
View/Control partitioning set up for sophisticated user management
of up to 32 user registrations.
• Multi-recorder, Multi-site system can be made with optional WV-
ASM100 i-Pro Management Software.
• Front panel LCD screen for status display
• HDD capacity is expandable with 4 HDD slots in the main unit and
up to 6 WJ-HDE300 optional Extension Units each with 4 HDD slots.
Disk partitioning for flexible record management: Normal, Event, Copy
HDD Safety Mode to protect HDDs during the installation of WJ-ND300A
• RAID5 capability with optional WJ-NDB301 RAID5 Board
Network Disk Recorder
WJ-ND300A
WJ-ND300A
(120 V AC)
WJ-ND300A
(220 ~ 240 V AC)
Power Source
: 120 V AC, 60 Hz (NTSC)
220 ~ 240 V AC, 50 Hz (PAL)
Power Consumption: approx. 85 W (including 4 HDDs when installed)
Dimensions
:
420 mm (W) x 88 mm (H) x 350 mm (D)
(19-9/16” (W) x 3-7/16” (H) x 13-13/16” (D))
(excluding rubber feet and projections)
Weight
: 7.2 kg (16 lbs.) (When no HDD exist)
Extension Unit
WJ-HDE300
(4 HDD slots for optional
HDD units)