Panasonic WJ-ND400/1000 Quick Reference

Panasonic WJ-ND400/1000 Manual

Get Panasonic WJ-ND400/1000 PDF manuals and user guides View all Panasonic WJ-ND400/1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WJ-ND400/1000 manual content summary:

  • Panasonic WJ-ND400/1000 | Quick Reference - Page 1
    Network Disk Recorder WJ-ND400 Quick Reference Guide The Quick Reference Guide provides simple explanations for operating the product. Network Settings Set the IP address, subnet mask, and other network settings for each port. LCD z Factory default network settings Item PT#1 Camera port PT
  • Panasonic WJ-ND400/1000 | Quick Reference - Page 2
    screen (multiscreen). Click the [Cam. select] button. The camera list is displayed in the [Camera select] box. Click [WJ-ND400] and select in order The live image from the selected the camera group title and camera title. camera channel is displayed on a 1- screen. Click the [Multiscreen] button
  • 1
  • 2
Play back recorded images.
Control the playback of recorded images from the [HDD] tab.
Search for and play back recorded events (REC event search).
Play back Recorded Images
Search for and Playback Images
Select the camera channel you want to
playback and click the [PLAY] button.
Plays back recorded images. [
] is
displayed in the status display area.
•
Playback resumes from the date and
time when playback was stopped.
Click the [STOP] button to stop
playback.
[
] disappears from the Status
display area and a live image from the
camera is displayed in the Image
display.
Click the [Go to date] button in the
Playback point operation area.
This displays the [Go to date] window.
Select the date and time of the image to
play back and then click the [PLAY]
button.
[
] is displayed in the status display
area and images at the specified date
and time are played back.
（1）
（3）
（2）
（4）
Playback point
operation area
(1)
[FF]/
[REW]
: Plays recorded images forward or in reverse at
high speed.
The playback speed changes each time the
button is clicked.
(Approximately 4x
8x
16x
32x
48x
96x)
(2)
[NEXT
RECORD]/
[PREV
RECORD]
: Skips forward or backward to play the recorded
image of the next event.
(3)
[NEXT
IMAGE]/[PREV
IMAGE]
: Click during playback or when paused to play
one frame at a time forward or backward, or to
pause.
(1)
(2)
(3)
[HDD] Tab
Click the [Control] button and then click [Search] button in the
[Search] box.
•
This will display the [Select search method] screen.
Click the [Rec event search] button.
•
This displays the [Rec event search] window.
Narrow the conditions.
Select the "Time & date", "Rec event", and "Camera" for the
images you want to playback and then click the [OK] button.
•
[FILTERING] is displayed on the status display area and the
filtered results are displayed on the recorded event list
window.
•
Click the [All List] button to eliminate all the search conditions.
Click the recorded event time you want to play back. The
selected images are played back.
Click the [STOP] button to stop playback.
(1)
(2)
(3)
(4)
Network Disk Recorder
WJ-ND400
Quick Reference Guide
Set the IP address, subnet mask, and other network settings for each port.
Display the operating window from a web browser on a PC.
Network Settings
Display the Operating Window
The Quick Reference Guide provides simple explanations for operating the product.
Factory default network settings
Item
PT#1
Camera port
PT#2
Client PC port
PT#3
Maintenance port
DHCP
-
OFF
-
IP address
192.168.0.250
192.168.1.250
192.168.2.250
Subnet
mask
255.255.255.0
255.255.255.0
255.255.255.0
Gateway
-
192.168.1.1
-
HTTP
-
80
-
How to configure network settings
Use the arrow buttons (up or down) on the
date display screen to display the [IP
Address Setup] and then press the [SET]
button.
•
The cursor is shown as an under bar
(_).
Switch to the settings screen.
•
When the cursor changes to ">":
Arrow buttons (left or right): Select port
Arrow buttons (up or down): Select item
Click the [SET] button when the cursor is
[>].
The cursor moves to the number area.
Move the cursor with the arrow buttons
(left or right) to configure the settings.
•
Arrow buttons (left or right): Move the
cursor
•
Arrow buttons (up or down): Input a
value
Press the [ESC] button to move the cursor
to ">" and check the settings.
Press the [ESC] button again to return to
the date display screen.
IP Address Settings
Screen
[SET]
LCD
ESC button
SET button
Arrow buttons
Launch the web browser, input the main
unit's IP address, and press the [Enter]
key.
The authentication screen opens.
Enter your user name and password to
login.
•
Initial default
User name:
ADMIN
Password:
12345
This will display the top page.
•
The wizard for installing ActiveX
control, which is required to display
images from cameras, opens. Follow
the instructions of the wizard.
3TU001890AAA
AM0408-0
ND400_A3_E.fm
1 ページ
２００８年４月８日
火曜日
午後２時５９分