Panasonic WJHD200 WJHD200 User Guide

Panasonic WJHD200 - Digital Disk Recorder Manual

Get Panasonic WJHD200 - Digital Disk Recorder PDF manuals and user guides View all Panasonic WJHD200 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WJHD200 manual content summary:

  • Panasonic WJHD200 | WJHD200 User Guide - Page 1
    ZOOM HDD /SEESTCUP STOP PLAY REC FULL ERROR SAELARRCMH PLAY MODE SERECT REC STOP PUSH- PAUSE SET TISMEEA&RDCAHTE RALEACRAMLL Digital Disk Recorder WJ-HD200 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 2
    operating and maintenance (servicing) instructions in the literature accompanying with the limits for a Class A digital device, pursuant to Part 15 of the in accordance with the instruction manual, may cause harmful in the event of theft. Model No. WJ-HD200 Serial No. WARNING: To prevent fire or
  • Panasonic WJHD200 | WJHD200 User Guide - Page 3
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Panasonic WJHD200 | WJHD200 User Guide - Page 4
    SAFETY INSTRUCTIONS 3 WJ-HD200 SETUP 57 I To Access Setup Menus 57 I Timer Setup (TIMER SETUP 57 I Trigger Action Setup (TRIGGER ACTION SETUP) .... 59 I Camera Recording Setup (REC CAMERA SETUP) ... 59 I Manual WJ-HD200 72 I Main Panel 72 I Main Control Panel 73 I Alarm List 75 TROUBLESHOOTING
  • Panasonic WJHD200 | WJHD200 User Guide - Page 5
    PREFACE The Digital Disk Recorder WJ-HD200 is designed for use live zoomed electrically Sequential live • Recording Mode Manual recording Timer recording Alarm-event recording Power-on recording live images Viewing playback images Controlling cameras Controlling recorder • Miscellaneous Password
  • Panasonic WJHD200 | WJHD200 User Guide - Page 6
    damage the appliance. Turn the power off immediately and contact qualified service personnel for service. • Handle the appliance with care. Do not strike or shake data", due to failure or trouble of machine. Any consequent damage or loss arising from such problem is not subject of the warranty. 6
  • Panasonic WJHD200 | WJHD200 User Guide - Page 7
    OSD SEQUENCE 5 CAMERA SELECT 2 3 4 6 7 8 HDD STOP PLAY REC SETUP /ESC MULTISCREEN FULL SELECT ALARM SERCH ERROR ZOOM PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 r u o !1 !5 !6 @1 @2 @3 @4 @5 @6 @7 q Operate Indicator
  • Panasonic WJHD200 | WJHD200 User Guide - Page 8
    the record. !9 Recording Button (8REC) Pressing this button manually starts recording. The LED in the button lights up during recording mode. Recording starts when this button is pressed manually, when the preset time for the internal timer comes, or when an
  • Panasonic WJHD200 | WJHD200 User Guide - Page 9
    While opening the time and date search window (TIME & DATE SEARCH): Pressing the JogDial moves the cursor to the next position in the window. Rotating the JogDial increases or decreases the parameter. After specifying the date and time, press the [PLAY] button to start playback. When operating alarm
  • Panasonic WJHD200 | WJHD200 User Guide - Page 10
    Connector (VIDEO IN 1-8) This BNC accepts a video signal supplied from a camera. A 75 Ω termination is made unless the video output terminal is connected is used to communicate with external devices compatible with the PSD (Panasonic Security Data) protocol based on RS485. $1 Cooling Fan Prevents
  • Panasonic WJHD200 | WJHD200 User Guide - Page 11
    INSTALLATION G Warning This installation should be made by qualified service personnel or system installers. G Notes Places to avoid • Direct exposure to sunlight or near a source of heat such as a radiator. • Very dirty and dusty places.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 12
    6. Assemble the optional HDD unit onto the bracket using the absorbers, sleeves, and screws provided with the recorder. 7. Place the HDD unit on the chassis, and fix it with six screws. 8. Restore the fan cords and connectors as before. 9. Connect the power cable and flat cable on the rear of the
  • Panasonic WJHD200 | WJHD200 User Guide - Page 13
    are connected in combination with the multiscreen and spot monitors, microphone, and speakers. Microphone System Cameras System Cameras Amplifier IN OUT AUDIO IN 8 7 6 5 4 3 2 1 SPOT OUT ALARM/REMOTE OUT 8 7 6 5 4 3 2 1 VIDEO MULTI SCREEN OUT RS-232C MODE 10/100BASE
  • Panasonic WJHD200 | WJHD200 User Guide - Page 14
    controllers and multiplex unit compatible with PS•Data. Pan/Tilt Table Receiver Microphone System Cameras POWER Amplifier ON OFF Combination Cameras ALARM ALARM SUSPEND Data Multiplex Unit WJ-MP204 Data Multiplex Unit RS485 Cable (WV-CA48) IN OUT AUDIO IN 8 7 6 5 4 3 2 1 SPOT
  • Panasonic WJHD200 | WJHD200 User Guide - Page 15
    Personal computers can access the WJ-HD200 via the network. Combination Cameras Pan/Tilt Table Receiver System Cameras POWER ON OFF ALARM ALARM SUSPEND Data Multiplex Unit WJ-MP204 Data Multiplex Unit RS485 Cable (WV-CA48) IN OUT AUDIO IN 8 7 6 5 4 3 2 1 SPOT OUT
  • Panasonic WJHD200 | WJHD200 User Guide - Page 16
    recorder. I Connection with the Monitors Connect the spot and multiscreen monitors. Disk Recorder WJ-HD200 SPOT OUT MULTI SCREEN OUT IN 8 7 6 OUT 8 7 6 G Data-multiplex Camera Connection Connect the combination cameras and the receiver via the multiplex unit with the recorder. Combination
  • Panasonic WJHD200 | WJHD200 User Guide - Page 17
    Notes: • Input rating: Low-active, non-voltage normally open (N.O.) contact • Output rating for pin #4 Alarm Recovery Out *1: High-active with a 200 Ω resistor pulled up to +5 V • Output rating for pin #7 Alarm Out 2 *2: High-active with a 4.7 kΩ resistor pulled up to +12 V • Output rating for pin
  • Panasonic WJHD200 | WJHD200 User Guide - Page 18
    Digital Disk Recorder POWER ON SIGNAL GND OFF Note: Using a conversion cable may malfunction since this RS-232C is incompatible with USB. WJ-HD200 DB9 1 2 3 4 5 6 7 8 Frame WJ-HD200 be made at both ends of the chain. Refer to the manual included with each device for termination. See page 20, I
  • Panasonic WJHD200 | WJHD200 User Guide - Page 19
    POWER ON SIGNAL GND OFF G 10/100BASE-T Port Connection The PC controls the WJ-HD200 via Ethernet. 78 78 23 23 POWER ON OFF 456 UNIT 901 1 ALARM 3 VIDEO 2 1 MULTI SCREEN OUT RS-232C MODE 10/100BASE-T DATA Digital Disk Recorder POWER ON SIGNAL GND OFF Hub Personal Computer 19
  • Panasonic WJHD200 | WJHD200 User Guide - Page 20
    DIP Switch Setting The 6-bit DIP switch is used as follows. System Mode Setup Termination 1 Termination 2 ON 123456 MODE #1 through #4: System mode setup #4 and #5: DATA port termination I System Mode Switch Position Mode ON 123456 MODE Normal operation mode ON 123456 MODE Initializing
  • Panasonic WJHD200 | WJHD200 User Guide - Page 21
    STOP PLAY REC SETUP /ESC FULL ALARM SERCH ERROR PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 Confirm that the HDD access indicator is off. HDD STOP PLAY REC SETUP /ESC FULL ALARM SERCH ERROR PLAY MODE SELECT REC STOP
  • Panasonic WJHD200 | WJHD200 User Guide - Page 22
    the camera image is displayed if you changed the settings and closed the setup menu. G Buttons and Dials Used for Setup HDD STOP SETUP /ESC N FULL ALARM SERCH ERROR PLAY REC REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL PLAY MODE SELECT Digital Disk Recorder WJ-HD200 [D up
  • Panasonic WJHD200 | WJHD200 User Guide - Page 23
    Tree The figure shows the hierarchy of menu windows. WJ-HD200 MAIN MENU TIMER INT TIMER OFF TIMER EXT TIMER REC (Assignment) REC SETUP EXT REC SETUP DISPLAY SETUP SYSTEM SETUP ALARM SETUP COMMUNICATION SETUP NETWORK SETUP CAMERA TITLE TIME ADJUST SETUP VMD SETUP SERIAL SETUP SWITCHER SETUP
  • Panasonic WJHD200 | WJHD200 User Guide - Page 24
    I Initializing You can initialize all disk contents including image data and/or setup data. G Initializing All Contents & Setup Data Warning! The following are irrevocable procedures. We strongly recommend that you copy important pictures from the hard disk. G Initializing Setup Data SYSTEM
  • Panasonic WJHD200 | WJHD200 User Guide - Page 25
    top of the menu tree from where every menu window starts. WJ-HD200 MAIN MENU TIMER OFFO REC SETUPO EXT REC SETUPO DISPLAY SETUPO a timer mode using the JogDial. OFF: Does not use any timer, and manual recording is available. INT: Carries out internal timer recording according to the program.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 26
    images recorded with a rate different from the preset. • Suffix "xxx" following "SP-" is specified in REC MODE TABLE in the ADDENDUM attached to the manual. 1. Move the cursor to MODE, and press the JogDial. The mode area will be highlighted. 2. Select a recording mode using the JogDial, and press
  • Panasonic WJHD200 | WJHD200 User Guide - Page 27
    is pressed, or the RESET IN signal is supplied to the rear panel. Manual: Recording continues for as long as the alarm input is active, or at [SET] button. The CAM REC SETUP menu opens. 2. Move the cursor to the camera channel with the [D] or [C] button. 3. Select the parameter with the JogDial, and
  • Panasonic WJHD200 | WJHD200 User Guide - Page 28
    Manual recording is available when OFF is selected for TIMER in WJ-HD200 MAIN MENU; the timer schedule does not apply. Alarm recording will also be carried out with parameters specified in this menu. WJ-HD200 FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO G Clock (CLOCK) 1. Press the
  • Panasonic WJHD200 | WJHD200 User Guide - Page 29
    2. Press the JogDial (SET) to validate the selection. 3. Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. G Time & Date Display (TIME&DATE DISP.) 1. Select ON or OFF with the JogDial. The default is ON. ON: Time & date display is enabled
  • Panasonic WJHD200 | WJHD200 User Guide - Page 30
    ON STATUS POSI. R-LOWER HDD FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO 2. Press the JogDial (SET) to validate the selection. 3. Press the STATUS POSI. R-LOWER HDD FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO 1. Select either ON or OFF with the JogDial. The default is
  • Panasonic WJHD200 | WJHD200 User Guide - Page 31
    to step 2 above, or press the [SETUP/ESC] button to escape from the CAMERA TITLE menu. 5. 5-1 Select a character for the digit with the JogDial. Each title is identical to the camera number: 1, 2, 3, and so forth as the default. Available characters are as follows. 0~9 A~Z 5-2 Press
  • Panasonic WJHD200 | WJHD200 User Guide - Page 32
    the JogDial. 6. Enter a number with the numeric button, and press the JogDial. The cursor moves one digit to the right. 7. Repeat steps 5 and 6 until all digits are entered. 8. Press the [SETUP/ESC] button to confirm the entered password. Go back to step 3 if you have not yet set the OPERATION
  • Panasonic WJHD200 | WJHD200 User Guide - Page 33
    • Simultaneous playback will pause prior to a time space depending on the recording rate when the playback area on the disk nears the recording area. This is to avoid the access collision caused by the simultaneous recording and playback in an area on the disk. 0.1 FPS: 20 minutes maximum 1 FPS: 2
  • Panasonic WJHD200 | WJHD200 User Guide - Page 34
    G Time Adjust Setup (TIME ADJUSTING) IN and OUT terminals for a calibration signal are provided on the rear panel. The master unit supplies the calibration signal to the slave units once at the specified hour everyday. The slave unit accepts the signal through the IN terminal, and corrects its
  • Panasonic WJHD200 | WJHD200 User Guide - Page 35
    I Alarm Setup (ALARM SETUP) The digital disk recorder accepts alarm signals supplied from connected devices such as sensors or camera site equipment. The recorder itself also generates an alarm signal when the preset motion detection is activated. Any alarm signal starts recording with the preset
  • Panasonic WJHD200 | WJHD200 User Guide - Page 36
    * CAM1 Notes: • VMD should be used when the input to the unit is from an ordinary camera. Select [OFF] to avoid useless VMD when a video multiplexer or combination camera supplies the input to the unit. • Set ALARM SUSPEND to ON when you do not want VMD to be activated during the VMD setup
  • Panasonic WJHD200 | WJHD200 User Guide - Page 37
    with the JogDial. The default value is 1. Assignable address: From 1 to 99, must be unique in the chain. Note: Assign an address except 1 to WJ-HD200 when using a system controller in the system. G System Unit Address (SYS-UNIT ADDRESS) (exclusive to PS •DATA) When the recorder performs as a system
  • Panasonic WJHD200 | WJHD200 User Guide - Page 38
    Number Setup (CAM NO. SETUP) (exclusive to PS •DATA) Camera numbers will be used in a PS•DATA chain when you select a camera to control it from a system controller. 1. Move the cursor to CAM NO. SETUPO with the [D] or [C] button, and press the JogDial. The CAM NO. SETUP
  • Panasonic WJHD200 | WJHD200 User Guide - Page 39
    SETUPO SEQUENCE TIMING INT AUTO SKIP ON I Switcher Setup (SWITCHER SETUP) SWITCHER SETUP START DISPLAY QUAD-4A MULTI SEL MODE ALL SEQUENCE SETUPO CAMERA VIEW SETUPO Video switcher functions are programmed in this menu setup. G Start Display (START DISPLAY) The image in the selected form will be
  • Panasonic WJHD200 | WJHD200 User Guide - Page 40
    SKIP are the same as in step 6 of MULTI SEQ SETUP. G Camera View Setup (CAMERA VIEW SETUP) Open the CAMERA VIEW SETUP menu to program the live image of each camera channel to be displayed or vailed on the monitor. CAMERA VIEW SETUP CAM MODE 1 ON 2 ON 3 ON 4 ON 5 OFF 6 OFF 7 OFF
  • Panasonic WJHD200 | WJHD200 User Guide - Page 41
    channel # (*). * = 1-8 PC* POW ERR PC Power Error PC alarm was logged, but no picture recorded. * = 1-8 Power disconnection due to electricity failure/trouble has been detected. Errors other than shown above G System Version (SYSTEM VERSION) This line displays the version number of the installed
  • Panasonic WJHD200 | WJHD200 User Guide - Page 42
    Spot A selected live image is displayed on the spot monitor until a new input selection is made. 1. Press any numeric button from 1 - 8. CAMERA SELECT 1 2 3 4 5 6 7 8 I On the Multiscreen Monitor G Selecting the Multiscreen Monitor 1. Press the [SPOT/MULTI] button to turn the LED in the
  • Panasonic WJHD200 | WJHD200 User Guide - Page 43
    during the sequence, both the multiscreen monitor and spot monitor can be switched to the single live image. • During the sequence, the LEDs of the [CAMERA SELECT] buttons light up corresponding to the selected cameras that send images to the monitor. 43
  • Panasonic WJHD200 | WJHD200 User Guide - Page 44
    time has elapsed (Auto Reset), when the [RESET] button is pressed on the front panel (Manual Reset), when the external reset signal is received on the rear panel (External Reset), or when activations that have not yet been manually reset. ALARM SUSPEND RESET CAMERA SELECT 1 2 3 4 5 6 7 8 44
  • Panasonic WJHD200 | WJHD200 User Guide - Page 45
    received, the last activated input image will be displayed. • The blinking camera title and "ALARM" indication on the monitor will be alternately. For example panel. • The Alarm Out signal on the rear panel is reset. G Manual (All) Reset Pressing the [RESET] button on the front panel will clear all
  • Panasonic WJHD200 | WJHD200 User Guide - Page 46
    G External Reset The activated alarm event except video motion detection, is reset when the recorder receives an external reset signal from the connected device via the REMOTE/ALARM connector on the rear panel. The ALARM indicator changes from blinking to a steady light. G Pressing REC STOP Button
  • Panasonic WJHD200 | WJHD200 User Guide - Page 47
    MULTI 1 RESET LOCK OSD SEQUENCE 5 CAMERA SELECT 2 3 4 6 7 8 HDD STOP PLAY REC SETUP /ESC MULTISCREEN FULL SELECT ALARM SERCH ERROR ZOOM PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 For power-on recording, select EXT
  • Panasonic WJHD200 | WJHD200 User Guide - Page 48
    WJ-HD200 MAIN menu. The menu setup can exempt specific inputs from manual CAMERA SELECT 2 3 4 6 7 8 MULTISCREEN SELECT ZOOM HDD STOP PLAY REC SETUP /ESC FULL ALARM SERCH ERROR PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200
  • Panasonic WJHD200 | WJHD200 User Guide - Page 49
    Playback In playback modes, the recorded image data are played back. Notes: • Alarm recording will interrupt playback if SIMUL REC&PLAY is set to OFF, or will allow playback to continue if set to ON. • Operation of the [PLAY] button will be ignored if the disk is empty, for instance, when the
  • Panasonic WJHD200 | WJHD200 User Guide - Page 50
    4. Press the [PLAY] button to play back the searched record. 5. Press the [STOP] button to stop playback. Note: "Alarm Search Playback" and "Alarm Log Recall" are similar, but different in operations. Refer to I Alarm Log Recall & Search on page 46. 6. Repeat from step 1 to search for another time
  • Panasonic WJHD200 | WJHD200 User Guide - Page 51
    . The "KEY LOCKED DONE!" message appears on the monitor. LOCK KEY LOCK DONE! 1. Enter your five-digit password using the [CAM SELECT] buttons (1-8). The buzzer shortly beeps once, and the entered digit changes from "-" to " * " on the monitor. 2. The prompt window will display "KEY UNLOCKED!" for
  • Panasonic WJHD200 | WJHD200 User Guide - Page 52
    52
  • Panasonic WJHD200 | WJHD200 User Guide - Page 53
    WJ-HD200 NETWORK OPERATION 53
  • Panasonic WJHD200 | WJHD200 User Guide - Page 54
    PREPARATIONS I System Requirements Your personal computer must meet the following minimum requirements. OS: One of the following operating systems: Windows98 Second Edition Windows2000 Windows Millennium Edition WindowsXP Professional or Home Edition Browser: One of the following browser software:
  • Panasonic WJHD200 | WJHD200 User Guide - Page 55
    PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 Digital Disk Recorder • Connection with a Client PC via Hub Ethernet Cross Cable Personal Computer Camera Super Dynamic OPERATE ALARM TIMER DST SUSPEND REMOTE SPOT MULTI 1 RESET LOCK
  • Panasonic WJHD200 | WJHD200 User Guide - Page 56
    168.0.10/ (or the IP Address set for WJ-HD200) / in the URL (Uniform Resource Locators) space. The browser displays the MAIN CONTROL PANEL of the WJ-HD200 homepage as shown in the figure. Notes: • Preset alarm recording quality Preset manual recording quality Recorded quality on the disk 56
  • Panasonic WJHD200 | WJHD200 User Guide - Page 57
    Setup Menus There are fourteen setup menus to adapt the WJ-HD200 to your requirements. SYSTEM INFORMATION: Displays various system information. and parameters for timer recordings. REC SETUP: Specifies the parameters for manual and alarm recordings. EXT REC SETUP: Selects optional parameters to be
  • Panasonic WJHD200 | WJHD200 User Guide - Page 58
    G Program Assignment (TIMER REC) When internal timer (INT) is selected, programs can be assigned on a weekly and/or daily basis. G Recording Mode Setup (PROG1-4 NO.1-4 SETUP) Parameters for internal timer recording are assigned to each event (NO.1-4) of the program (PROG1-4) in this window. There
  • Panasonic WJHD200 | WJHD200 User Guide - Page 59
    " following "SP-" is specified in REC MODE TABLE in the ADDENDUM attached to the manual. 1. Select a recording mode. Audio data will be recorded when a mode with hyphen others. OFF: All channels are recorded with the same priority. Click CAMERA REC SETUP in the system setup window to open the menu.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 60
    REC: Records the camera channel regardless of alarm or non-alarm status. I Display Setup (DISPLAY SETUP) I Manual Recording Setup (REC SETUP) Manual recording will take effect when OFF (not INT or EXT) is selected in the Timer Mode Selection TIME REC window. The parameters for alarm recording
  • Panasonic WJHD200 | WJHD200 User Guide - Page 61
    open the CAMERA TITLE window. I Camera Title (CAMERA TITLE) 8 Password Lock (PASSWORD LOCK) Buttons on the front panel of the WJ-HD200 will be password-protected or freed. ON: Enables password-protection. OFF: Disables password-protection. 8 Password All (PASSWORD ALL) Enter a five-digit password
  • Panasonic WJHD200 | WJHD200 User Guide - Page 62
    Password Operation (PASSWORD OPERATION) Enter a five-digit password to protect normal operations from unauthorized access priority over others. 8 Time Adjusting (TIME ADJUSTING) The internal timer built into the WJ-HD200 is calibrated once a day via the Time Adjust In and Out terminals on the rear
  • Panasonic WJHD200 | WJHD200 User Guide - Page 63
    I Alarm Setup (ALARM SETUP) I Video Motion Detector Setup (VMD SETUP) 8 Alarm Buzzer (ALARM BUZZER) ON: Buzzer beeps while alarm is active. OFF: Buzzer does not beep. 8 Video Loss Detection (VIDEO LOSS DETECT) OFF: Deactivates the video loss detection. ON: Activates the detection. 8 Monitoring
  • Panasonic WJHD200 | WJHD200 User Guide - Page 64
    pause. 1 SEC: Pauses for 1 second. 5 SEC: Pauses for 5 seconds. Click the [SET] button when all items have been set properly. Click the [CAMERA NO. SETUP] button. The CAMERA NUMBER SETUP window opens. 8 Baud Rate (BAUD RATE) 4800: 4 800 bps 9600: 9 600 bps 19200: 19 200 bps 8 Data Bit (DATA BIT
  • Panasonic WJHD200 | WJHD200 User Guide - Page 65
    Number Setup (CAMERA NUMBER SETUP) (only for PS•DATA) IP Address (IP ADDRESS) The IP OFF: Disables DNS, only IP address usable. MANUAL: Enables DNS. AUTO: Enables DNS. Domain Name (DOMAIN NAME) Enter from the keyboard. DNS Server Address (DNS SERVICE ADDRESS) Enter from the keyboard. 8 Dynamic DNS
  • Panasonic WJHD200 | WJHD200 User Guide - Page 66
    Click the [SET] button when all items have been set properly. The WJ-HD200 will restart, and you will be requested to enter the URL as described open the Spot Sequence Setup window. 8 Camera View Setup (CAMERA VIEW SETUP) Click the button to open the Camera View Setup window. I Multi Sequence Setup
  • Panasonic WJHD200 | WJHD200 User Guide - Page 67
    CH) 1 - 8: The selected camera image will be displayed. OFF: The blackout screen will be displayed. 8 Time (TIME) Available times: 2-30 S 8 HDD Hour Meter (HDD HOUR METER) Each meter shows how many hours the digital hard disk recorder has been operated in playback, recording and idle. The built
  • Panasonic WJHD200 | WJHD200 User Guide - Page 68
    8 System Software Version (SYSTEM VERSION) This line displays the version number of the installed system software. I System Log (SYSTEM LOG) 8 MAC Address (MAC ADDRESS) A MAC (Media Access Control) address is displayed. 8 IP Address (IP ADDRESS) The IP address is displayed. 8 Subnet Mask (SUBNET
  • Panasonic WJHD200 | WJHD200 User Guide - Page 69
    NETWORK CONFIGURATION I User Setup (USER SETUP) A maximum of 16 users can be registered. I Host Setup (HOST SETUP) A maximum of 8 hosts can be registered. 8 User Authorization (USER AUTHORIZATION) OFF: Allows free access. ON: Verifies the password and access level for a maximum of sixteen users.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 70
    I FTP Client Setup (FTP CLIENT SETUP) Interval (INTERVAL) Available times: 1 - 1 440 seconds, 1 - 1 440 minutes Channel to Send (CHANNEL TO SEND) OFF: Does not send the channel image. ON: Sends the channel image. Click the [SET] button when all items have been set properly. 8 Basic Setup (BASIC
  • Panasonic WJHD200 | WJHD200 User Guide - Page 71
    . Auto Skip (AUTO SKIP) OFF: Displays any step where no video is input as a blackout screen. ON: Skips any step where no video is input. Camera Channel (CAM CH) Available channels: CH1 - CH8, OFF Duration (TIME) Available durations: FAST, MIDDLE, SLOW, VERY SLOW Click the [SET] button. 71
  • Panasonic WJHD200 | WJHD200 User Guide - Page 72
    OPERATING WJ-HD200 I Main Panel q w er t y u i uo !0 !4 !5 !1 !2 !3 !6 !7 !8 !9 q Main Control Panel Tab Opens the main control record. !5 Rewind Button (REW) Rewinds the recorded image on the WJ-HD200 to the start position. !6 Play Button (PLAY) Plays back the recorded image.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 73
    Forward Button (FF) Fast-forwards the recorded image on the WJ-HD200 to the end position. !8 To the Latest Frame Button (TO ) Stops recording. I Main Control Panel 8 Camera Selection Button (Camera Select) Click any of the buttons. The selected camera channel will be displayed in the image area.
  • Panasonic WJHD200 | WJHD200 User Guide - Page 74
    /AUTO) buttons adjust the focus of the image. When AUTO is clicked, the camera will adjust the focus by itself. IRIS (CLOSE/OPEN/RESET) buttons adjust the : Clicking the desired direction in the image display area will move the camera if it is mounted on a pan/tilt table. The image display area
  • Panasonic WJHD200 | WJHD200 User Guide - Page 75
    List Search button opens the search dialog. Event types are abbreviated as follows in the list. TERM: The alarm terminal on the rear of the WJ-HD200 is activated. VMD: The built-in Video Motion Detector operates. PC: The recorder received an alarm from a PC. Specify the month, day, year, and time
  • Panasonic WJHD200 | WJHD200 User Guide - Page 76
    TROUBLESHOOTING Phenomenon Power is not turned on. Cause Power cord not properly connected What to do Connect the power cord to AC outlet. Error message "NO DISK" is displayed No disk available on the monitor. Error message "CH n LOSS (n=1-8)" is Disconnection of camera, camera servicing WJ-HD200
  • Panasonic WJHD200 | WJHD200 User Guide - Page 77
    SPECIFICATIONS & APPENDIX 77
  • Panasonic WJHD200 | WJHD200 User Guide - Page 78
    SPECIFICATIONS General Power Source Required: Power Consumption: Ambient Operating Temperature: Ambient Operating Humidity: Dimensions: Weight: Input Video Input: Audio Input: Image Process Compression System: Pixel Rate: Refresh Rate: Output Video Output: Video Output Front Panel: Audio Output:
  • Panasonic WJHD200 | WJHD200 User Guide - Page 79
    STANDARD ACCESSORIES Rack Mounting Bracket 2 pcs. Screw for Rack Mounting Bracket (M3x10 6 pcs. Absorber 4 pcs. Sleeve 4 pcs. Hard Disk Fixing Screw 4 pcs. 79
  • Panasonic WJHD200 | WJHD200 User Guide - Page 80
    stop Recording stop Playback Pause Step playback FWD Step playback REW Skip playback FWD Skip playback REW Jump to latest Jump to oldest 80 WJ-HD200 Hold down 2 seconds STOP SETUP /ESC PUSH- PAUSE SET / / STOP SETUP /ESC Hold down 2 seconds PUSH- PAUSE SET / / PUSH- PAUSE SET / / PUSH
  • Panasonic WJHD200 | WJHD200 User Guide - Page 81
    Statusd display on/off Button lock off Button lock on Time and date search Multiscreen pattern selection Multiscreen monitor Spot monitor Camera selection WJ-HD200 DST PUSH- PAUSE SET / / OSD Enter your password. LOCK TIME&DATE SEARCH MULTISCREEN SELECT ZOOM SPOT MULTI SPOT MULTI 1 8 WV
  • Panasonic WJHD200 | WJHD200 User Guide - Page 82
    I RS-232C Communication Protocol The following pages detail the elements for communication between the Digital Disk Recorder and the personal computer. Be sure to select RS-232C for PROTOCOL in the COMMUNICATION SETUP window. For BAUD RATE, DATA BIT and
  • Panasonic WJHD200 | WJHD200 User Guide - Page 83
    Stop OSP:n Skip&Play Rewind Forward a field Rewind a field Camera Selection OSR:n OVF OVR OCS:ccccc Monitor Selection Button Lock EL- disabled n=1 Suspension enabled n=0 Display hides n=1 Display appears n=+ Toggle n=0 Manual reset n=1 Auto reset n=01 Skip number (fixed) d=F Search later d=B
  • Panasonic WJHD200 | WJHD200 User Guide - Page 84
    Setup Control Item Cursor Moves Transmission Command (ASCII) DCR:n1n2 Response (ASCII) DCR Key Lock MKL:n Recording Event Setup MRM:n Summer Time Setup MST:n Setup MSU:n Date&Time Setup TSU:yyyymmddhhnn MKL MRM MST MSU:n TSU Miscellaneous Control Item Transmission Command (ASCII) OSD
  • Panasonic WJHD200 | WJHD200 User Guide - Page 85
    (ASCII) QHR:nnn Parameter (ASCII) nnn=000-100 Decimal % QID:WJ-HD200 QKM:n QLD:n (Alarm Information) QSR: [status1]:[status2]:...[status11] QRV: :1 Setup operation msu:0 Normal operation oms:mmmm Monitor in operation ocs:mmmmm Camera in operation otc:n n=0 4a, 4b (Quad) n=2 9SCREEN oqt:ttn:
  • Panasonic WJHD200 | WJHD200 User Guide - Page 86
    to Maintain HDD Caution: Addition, replacement, and other HDD maintenance should be performed by qualified service personnel. G Power-on Procedures After power-on, the recorder confirms the HDD status and formatting No or something? Yes Press the STOP button. 2 seconds later Camera picture
  • Panasonic WJHD200 | WJHD200 User Guide - Page 87
    2 seconds to open the MAIN MENU. WJ-HD200 MAIN MENU TIMER OFFO REC SETUPO EXT REC SETUPO DISPLAY SETUPO SYSTEM SETUPO ALARM SETUPO COMMUNICATION SETUPO SWITCHER SETUPO SYSTEM INFORMATIONO G When Error Indicator is Lit Refer to your dealer for servicing when this happens. 8 HDD Check The
  • Panasonic WJHD200 | WJHD200 User Guide - Page 88
    Restart or Format All existing HDD have been previously used in another WJ-HD200. LOST HDD physically removed Remove link, or add a new HDD. Closes the menu, and restarts the recorder. The menu can also be displayed manually when you need to format the HDD or remove the logical link. 1. Turn
  • Panasonic WJHD200 | WJHD200 User Guide - Page 89
    8 Removing Logical Link (REMOVE LINK) This command logically disconnects the faulty HDD from the recorder and is applicable to an HDD of *, ERR, or LOST status. You may use this command before physically removing the faulty HDD, or when you continue to operate the system after logically removing the
  • Panasonic WJHD200 | WJHD200 User Guide - Page 90
    from another disk recorder that malfunctioned. • In normal operation after selecting the PLAY ONLY mode, "STOP (PO)" appears in the status display while camera pictures are displayed, but not in playback. "PO" stands for PLAY ONLY. 5. Press the JogDial to execute the selection, or press the [STOP
  • Panasonic WJHD200 | WJHD200 User Guide - Page 91
    I HTTP Download and Viewing Images When accessing the WJ-HD200 from the browser, and the [DOWNLOAD] button is clicked in playback, the image data and viewer software are downloaded as an "exe" file to your
  • Panasonic WJHD200 | WJHD200 User Guide - Page 92
    specified to attach. WJ-HD200 (Sender IP Address) STATUS REPORT DATE: Jan31.03 00:00:00 PORT: nCH G Error Notice Mail WJ-HD200 (Sender IP : Error on HDD2 Video loss is detected on channel "n". Repair the camera or cable disconnection. Alarm-recording triggered by "Type" was not possible
  • Panasonic WJHD200 | WJHD200 User Guide - Page 93
    SPOT MULTI 1 RESET LOCK OSD SEQUENCE 5 CAMERA SELECT 2 3 4 6 7 8 HDD STOP PLAY REC SETUP /ESC MULTISCREEN FULL SELECT ALARM SERCH ERROR ZOOM PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 Using Fire Wall A fire wall will
  • Panasonic WJHD200 | WJHD200 User Guide - Page 94
    Panasonic Digital Communications & Security Company Unit of Matsushita Electric Corporation of America Security Systems Group www.panasonic.com/cctv Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Zone Office Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Central:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.
WJ-HD200
Digital Disk Recorder
Operating Instructions
4
8
3
7
2
6
1
5
OPERATE
ALARM
SUSPEND
RESET
HDD
FULL
ERROR
OSD
DST
MULTISCREEN
SELECT
ZOOM
TIMER
REMOTE
LOCK
SEQUECE
ALARM
SERCH
STOP
PLAY MODE SERECT
PLAY
TIME&DATE
SEARCH
REC STOP
SPOT
MULTI
CAMERA SELECT
ALARM
RECALL
REC
PUSH– PAUSE
SET
Digital Disk Recorder WJ-HD200
SETUP
/ESC
ENGLISH
FRANÇAIS