Panasonic WJND200 WJND200 User Guide

Panasonic WJND200 - NETWORK DISK RECORDER Manual

Get Panasonic WJND200 - NETWORK DISK RECORDER PDF manuals and user guides View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WJND200 manual content summary:

  • Panasonic WJND200 | WJND200 User Guide - Page 1
    Recorder Setup Instructions WJ-ND200 Model No. ERROR MIRROR TIMER HDD1 REC HDD2 LINK /ACT SUALSAPREMND OPERATE ALARM BUZZER STOP Network Disk Recorder WJ-ND200 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future
  • Panasonic WJND200 | WJND200 User Guide - Page 2
    Terms used in these operating instructions 5 Operations Flow ...7 cameras [Camera 47 Settings relating to network [Comm 55 Settings relating to the authentication [User Mng 65 Settings for maintenance [Maintenance 72 Settings relating to the disk configuration [Config 76 Troubleshooting
  • Panasonic WJND200 | WJND200 User Guide - Page 3
    not experience deterioration of the recorded picture quality. Up to 16 cameras can be connected via a network and it is possible to record their camera pictures. It is possible to perform the settings or operate the WJ-ND200 (this unit) using a web browser installed on a PC connected to a network
  • Panasonic WJND200 | WJND200 User Guide - Page 4
    instructions There are 3 sets of operating instructions for the WJ-ND200 as follows. • Installation Guide (book) • Operating Instructions (PDF) • Setup Instructions (PDF, these operating instructions) These "Setup Instructions Internet service provider to instructions and use the software on
  • Panasonic WJND200 | WJND200 User Guide - Page 5
    Service Pack 4 is described as Windows 2000. Microsoft® Windows® XP Professional SP2 and Microsoft® Windows® XP Home Edition SP2 are described as Windows XP. Terms used in these operating instructions HDD Refers to a hard disk drive (mass storage medium). The unit records camera pictures
  • Panasonic WJND200 | WJND200 User Guide - Page 6
    manually by Panasonic's cameras that saves images on the SD memory card on the camera when communication with the camera failed in the period set for the schedule recording of this unit. Images saved by the SD memory recording are described as "SD memory data" on these operating instructions
  • Panasonic WJND200 | WJND200 User Guide - Page 7
    the power of the unit. For further information, refer to the Installation Guide. c Network settings of the PC (page 8) Change the TCP/IP the camera setup menu and perform the network settings of cameras. (page 47) Display the camera setup menu and configure the network settings of cameras.
  • Panasonic WJND200 | WJND200 User Guide - Page 8
    different from the settings above, perform the network settings of the PC. The network settings of cameras can be configured on the "NW Camera Setup" page ("Camera" - "NW Camera Setup"). In these operating instructions, the settings are performed on Windows XP as examples. Refer to the operating
  • Panasonic WJND200 | WJND200 User Guide - Page 9
    Screenshot 3 The "Network and Internet Connections" window will be displayed. Step 3 Click "Network Connections". Screenshot 4 The "Network Connections" window will be displayed. Step 4 Double click "Local Area Connection". Screenshot 5 The "Local Area Connection Status" window will be displayed
  • Panasonic WJND200 | WJND200 User Guide - Page 10
    Screenshot 6 The "Local Area Connection Properties" window will be displayed. Step 6 Click "Internet Protocol (TCP/IP)", and then click "Properties". Screenshot 7 The "Properties" window of "Internet Protocol (TCP/IP)" will be displayed. Step 7 Click "Use the following IP address" and enter the
  • Panasonic WJND200 | WJND200 User Guide - Page 11
    and the user authentication It is possible to restrict users from accessing this unit by setting the host authentication and/or the user authentication will be different depending on the settings of the LAN or the Internet service provider to which the unit is to be connected. Refer to an
  • Panasonic WJND200 | WJND200 User Guide - Page 12
    to access this unit from a PC without a registered IP address when "ON" is selected for "Host Authentication" on the "Basic Setup" of "User Mng." menu. Refer to a system administrator for further information. • Do not attach "0" before the numbers when entering IP address. Example Correct: 192
  • Panasonic WJND200 | WJND200 User Guide - Page 13
    top page is displayed for the first time, the install wizard of the ActiveX control required to display images from the camera will be displayed. Follow the instructions of the wizard. • When the install wizard is displayed again even after completing the installation of the ActiveX, restart the PC
  • Panasonic WJND200 | WJND200 User Guide - Page 14
    be displayed. The setup menu will be displayed while setting up. The camera title is displayed at the top left of the picture and the time had been recorded will be displayed when displaying recorded images.) Clicking the camera title during quad display will display the clicked picture on a single
  • Panasonic WJND200 | WJND200 User Guide - Page 15
    instructions (PDF).) "Control" panel [Multiscreen Select] box Up to 4 camera images can be displayed simultaneously on a 4-Screen. Each time the button is clicked, the camera ] button: The time when logged in/out for this unit, the user ID, or the IP address will be displayed. Logs will be displayed
  • Panasonic WJND200 | WJND200 User Guide - Page 16
    images will be displayed in the proportion of the clicked zoom ratio button. : 1x : 2x : 4x [Camera Select] box When the "WJ-ND200" title is clicked, the group title of the cameras will be displayed. Refer to page 52 for the descriptions of how to perform the group settings. When the group
  • Panasonic WJND200 | WJND200 User Guide - Page 17
    button is for performing camera network settings, group settings and sequence operation settings. Refer to page 47 for further information. [Comm] button The setup menu for network settings of the WJ-ND200 will be displayed. Refer to page 55 for further information. [User Mng.] button The setup
  • Panasonic WJND200 | WJND200 User Guide - Page 18
    because a user with higher priority is currently operating that camera. [DELETE]: Indicates that deletion of a recorded image is being performed. r Indicates information about events and errors. Clicking this button will temporarily disable alarm detection. (Refer to the operating instructions (PDF
  • Panasonic WJND200 | WJND200 User Guide - Page 19
    and date of a recorded image to be played. (Refer to the operat- ing instructions (PDF).) e [GO TO LAST] button Skips to the latest recorded time of a recorded image from the currently displayed camera channel and plays it. [REW] button Fast reverse playback will be performed. Playback speed
  • Panasonic WJND200 | WJND200 User Guide - Page 20
    this button will start downloading the viewer software that can play downloaded images. [TEXT Obtains recorded images on the SD memory card on the camera. The letters "SD" on this button will be . Recording button: Starts manual recording. Recording stop button: Stops manual recording. Important: To
  • Panasonic WJND200 | WJND200 User Guide - Page 21
    [FAR] button. The auto focus function can be performed by clicking the [AUTO] button. [Auto mode] box This box allows users to select the auto mode function and operate the camera. Click the button to select the auto mode function (Auto Track, Auto Pan, Preset Sequence, Sort, or Patrol) of
  • Panasonic WJND200 | WJND200 User Guide - Page 22
    & Date Emergency recording Emergency REC Event Action Basic Setup Terminal Setup Site Alarm Setup Schedule Time Table Program Special Days Camera NW Camera Setup Group Setup Sequence Setup Description Page Perform the minimum required settings to operate this unit. 27 Perform the settings for
  • Panasonic WJND200 | WJND200 User Guide - Page 23
    settings for the FTP server. Settings for transmitting 61 images from a camera connected to this unit to a designated FTP server periodically can be performed using "Panasonic Alarm Protocol" when an event or a problem occurs. Determine whether to enable or disable the user authentication 65
  • Panasonic WJND200 | WJND200 User Guide - Page 24
    Disk Setup Save/Load Config Description Page Versions of the software, hardware (this unit), MAC address, the 72 internal IP addresses of the connected cam- 73 eras and network line speed of the WJ-ND200 will be displayed. Perform the settings relating to the remaining disk size and
  • Panasonic WJND200 | WJND200 User Guide - Page 25
    Basic operation with the setup menu Screenshot 1 Start operation from the top page. Step 1 Click the [Setup] button. Screenshot 2 The "Setup" panel will be displayed. Step 2 Click the desired button relating to the settings to be configured. "Setup" panel 25
  • Panasonic WJND200 | WJND200 User Guide - Page 26
    will not be applied. Important: • When the settings are applied, all users except for the user who edited and applied the settings will be forcibly logged out. • When any setting of "User Mng." is changed, all login users will be forcibly logged out. • Recording will not be performed for around
  • Panasonic WJND200 | WJND200 User Guide - Page 27
    Perform the minimum required settings [Quick] Perform the minimum required settings to operate this unit. Before perform the settings on each setup menu, check the settings on the "Quick" menu first. Screenshot 1 Click the [Quick] button to display the "Quick" menu. Step 1 Perform the settings for
  • Panasonic WJND200 | WJND200 User Guide - Page 28
    gateway from the DHCP server. Set to "OFF" when entering the addresses above manually. ON: Uses the DHCP server. OFF: Does not use the DHCP server. camera is turned on. Refer to the operating instructions of the camera for further information. • The image compression method of the registered camera
  • Panasonic WJND200 | WJND200 User Guide - Page 29
    camera manually. • When "Register the IP address set with a detected camera" is selected and the DHCP setting of the detected camera is "ON", the unit will automatically set the DHCP setting of the camera WJ-NT304/WV-NW484 • When the IP address is registered to the camera, the HTTP port of the camera
  • Panasonic WJND200 | WJND200 User Guide - Page 30
    4D). The following window will be displayed when the [SETUP] button is clicked. It is possible to allocate 4 camera channels to each section (4A - 4D). Images from the selected camera channel will be displayed in the respective section of a 4-Screen in the image display area. Click the [SET] button
  • Panasonic WJND200 | WJND200 User Guide - Page 31
    s/20 s/30 s/1 min: The buzzer that started sounding at an error occurrence will sound for the selected period. EXT: The buzzer will start sounding when a trouble occurs and it will keep on sounding until the [ERR] button is clicked or the [BUZZER STOP] button on the front panel is pressed. Shutdown
  • Panasonic WJND200 | WJND200 User Guide - Page 32
    .20). • When "SLAVE" is selected, this function works differently depending on the recording status. For further information, refer to the installation guide (book). Summer Time (Daylight Savings) Perform the settings for summer time from the following. During summertime, the time will be displayed
  • Panasonic WJND200 | WJND200 User Guide - Page 33
    Summer Time (Daylight Savings) Table Set the start (IN)/end (OUT) date and time for summer time. The following window will be displayed when the [SETUP] button is clicked. Click the [SET] button after completing the settings, and close the window by clicking the [×] button at the top right of the
  • Panasonic WJND200 | WJND200 User Guide - Page 34
    rate. Refer to the provided installation guide (book) for further information about emergency ALM] but- ton is clicked. Note: When "MANUAL" is selected, recording will be performed for at When "OFF" is selected for a specified camera channel, images from a camera channel set to "OFF" will not be
  • Panasonic WJND200 | WJND200 User Guide - Page 35
    set to "M-JPEG". • The recording rate for "SD MEMORY REC" should be less than the recording rate set for the emergency recording. When the camera in use is WJ-NT304, recording will be performed at 0.2 ips even when "0.5 ips" or "1 ips" is selected for the recording rate for "SD MEMORY REC". • When
  • Panasonic WJND200 | WJND200 User Guide - Page 36
    (site alarm and terminal alarm). Refer to the provided operating instructions for further information about each event type. Basic settings for such as the alarm output duration and the buzzer sound duration of each camera channel at an event occurrence (site alarm and terminal alarm). Screenshot 1
  • Panasonic WJND200 | WJND200 User Guide - Page 37
    for the following items for each terminal alarm channel. [REC CAM] Performs the settings for a camera channel used for recording. [PRESET] Enter the preset position (1 - 256) to which the camera will move at a terminal alarm occurrence for each terminal. When no position is selected (blank), the
  • Panasonic WJND200 | WJND200 User Guide - Page 38
    Select "ON" or "OFF" whether to validate or invalidate the site alarm. ON: Validates the site alarm. OFF: Invalidates the site alarm. Port Number (from Camera) Designate the port number to be used for receiving the site alarm. Site Alarm Setup Perform the settings for the following items for each
  • Panasonic WJND200 | WJND200 User Guide - Page 39
    Assign a program to a timetable. (page 44) Creating a program [Program] Up to 4 programs can be created by performing the settings for each camera such as resolution, image quality, bandwidth control, etc. Screenshot 1 Click the [Schedule] button in the "Setup" panel and then click the "Program
  • Panasonic WJND200 | WJND200 User Guide - Page 40
    Perform the settings such transmission rate of "LIVE VIDEO" for each camera channel, and recording rate of each recording type, etc. [LIVE VIDEO 2 s/5 s/10 s/20 s/30 s/1 min/2 min/3 min/5 min/ 10 min MANUAL: Recording will be performed while alarm signals (site alarm, terminal alarm, command alarm)
  • Panasonic WJND200 | WJND200 User Guide - Page 41
    Note: When "MANUAL" is selected for "DURATION" (recording duration), recording will be rate for "SD MEMORY REC" should be less than the recording rate set for "LIVE VIDEO". When the camera in use is WJ-NT304, recording will be performed at 0.2 ips even when "0.5 ips" or "1 ips" is selected for the
  • Panasonic WJND200 | WJND200 User Guide - Page 42
    minutes. Refer to the operating instructions (PDF) for how to obtain images manually. Important: • The emergency recording will be performed at the recording rate set for "SD MEMORY REC" on the "Emergency REC" page ( page 34) when communication with the camera failed during the emergency recording
  • Panasonic WJND200 | WJND200 User Guide - Page 43
    indication), refer each rate for "LIVE VIDEO", "MANUAL REC", "SCHEDULE REC" and "EVENT REC". Then, ), the above problems may occur depending on number of the connected cameras and PCs. The playback and live image display will stop. Other users currently accessing the unit will forcibly be logged out
  • Panasonic WJND200 | WJND200 User Guide - Page 44
    Set the time zone and assign programs [Time Table] Create timetables for each day of the week, and assign a program to each timetable. Up to 6 recording programs can be created for each day of the week. Screenshot 1 Click the [Schedule] button in the "Setup" panel and then click the "Time Table"
  • Panasonic WJND200 | WJND200 User Guide - Page 45
    of the recipient. Refer to the operating instructions (PDF) for further information about the contents of Panasonic Alarm protocol" of the setup menu ("Comm" - "Panasonic Alarm protocol") ( page 64). To receive a notification and display the contents of the notification, the optional software
  • Panasonic WJND200 | WJND200 User Guide - Page 46
    Perform the settings of timetable for special days [Special Days] Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to 30 days. Perform the settings to specify dates as special days and apply the timetable of the day of the week to the
  • Panasonic WJND200 | WJND200 User Guide - Page 47
    them for their security when 20 minutes have passed after the power of the camera is turned on. Refer to the operating instructions of the camera for further information. • The following cameras can be searched by the "Camera Search" function. WV-NM100/WV-NS32x/WV-NW47x/WV-NP244 series/WV-NP1000
  • Panasonic WJND200 | WJND200 User Guide - Page 48
    will be displayed. (The displayed DHCP setting can be edited.) IP Address Set Check the checkbox of the detected camera to which the entered IP address is given, and then click the [Execute] button. Notes: • Before giving IP addresses automatically, set the subnet of the
  • Panasonic WJND200 | WJND200 User Guide - Page 49
    . When a message saying there is no available IP address is displayed, check and arrange the IP address settings to manually register an unused IP address to the camera. • "Start IP Address" is available only when "OFF" is set for the DHCP settings of the unit. Register the IP addresses of the
  • Panasonic WJND200 | WJND200 User Guide - Page 50
    to "MPEG-4", they will be "I-Frame". [CAM TITLE] Set the camera title displayed on the "Camera Select" panel, etc. Enter up to 16 alphanumeric characters except the following [USER ID] Set the user ID for accessing the cameras and logging in. Enter up to 32 alphanumeric characters. [PASSWORD] Set
  • Panasonic WJND200 | WJND200 User Guide - Page 51
    such as the following. CONNECT ERROR: Communication with the camera cannot be established ATTEST ERROR: User authentication of the camera failed DNS ERROR: DNS server cannot resolve the camera address CAMERA ERROR: Illegal response from the camera PROXY (CONNECT) ERROR: Cannot connect to the proxy
  • Panasonic WJND200 | WJND200 User Guide - Page 52
    each setup item. Step 4 Click the [SET] button after completing the settings. Settings of the title of the camera group [Group Setup] Set the title of the camera group. Screenshot 1 Click the [Camera] button in the "Setup" panel and then click the "Group Setup" tab. The "Group Setup" page will be
  • Panasonic WJND200 | WJND200 User Guide - Page 53
    button at the top right of the window. Note: When the image compression method of the camera selected for a camera channel is "MPEG-4", the respective sequence step will be skipped. [CAM] Select a camera whose images are to be displayed at each step from the following. - -: Skips the selected step
  • Panasonic WJND200 | WJND200 User Guide - Page 54
    Setup" - "Monitor Display" ( page 30). [PRESET] Enter the preset position to where the camera is to be moved at each step. (Only for SPOT Live Sequence) Enter 1 - 256 for "PRESET". When no number is entered (blank), the camera will not move at the respective step. [DWELL] Select a dwell time to go
  • Panasonic WJND200 | WJND200 User Guide - Page 55
    number from 1 - 65535 is available.It is unnecessary to change it for normal use. Notes: • Depending on the network settings of the LAN or Internet service provider, network communication may not be established if the http port number has been changed. In this case, refer to the administrator of the
  • Panasonic WJND200 | WJND200 User Guide - Page 56
    DHCP server. Select "ON" to obtain an IP address, a subnet mask and a gateway from the DHCP server. Set to "OFF" when entering the addresses above manually. ON: Uses the DHCP server. OFF: Does not use the DHCP server. [IP Address] When "OFF" is selected for "DHCP", enter an IP address according
  • Panasonic WJND200 | WJND200 User Guide - Page 57
    " or "OFF" to determine whether or not to use the DDNS (Dynamic Domain Name Server). When "ON" is selected, perform the following settings. Default: OFF User Name Enter a user name registered in the DDNS. Enter up to 32 characters using alphanumeric characters and the following marks
  • Panasonic WJND200 | WJND200 User Guide - Page 58
    and periods (.). Port Number Enter a port number of a proxy server. Exceptions Perform the settings for cameras who does not use the proxy server. Enter the set address of the network camera. Enter up to 128 alphanumeric characters including asterisks (*), semicolons (;) and periods (.). Notes: • To
  • Panasonic WJND200 | WJND200 User Guide - Page 59
    Settings for SNMP network [SNMP Setup] Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the SNMP manager. Screenshot 1 Click the [Comm] button in the "Setup" panel and then click the "SNMP Setup" tab. The "SNMP Setup" page will be
  • Panasonic WJND200 | WJND200 User Guide - Page 60
    . About the NTP server function • This unit can be used as the NTP server for the connected cameras. Set "123" for the port number on the camera. Refer to the operating instructions of the camera for how to perform the settings of the camera. • Time adjustment using the NTP server is unavailable for
  • Panasonic WJND200 | WJND200 User Guide - Page 61
    [FTP Setup] Settings for transmitting images from a camera connected to this unit to a designated FTP server periodically is necessary to select "MANUAL" or "AUTO" for "DNS". Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). User Name Enter a user name (login name)
  • Panasonic WJND200 | WJND200 User Guide - Page 62
    FTP Setup" window. *: When the image compression method of the camera for a camera channel is "MPEG-4", the recording duration of the recorded data may detection code to recorded images to be transmitted using the viewer software when an alarm occurs. Important: Images recorded by pre-event
  • Panasonic WJND200 | WJND200 User Guide - Page 63
    function (refer to the Operating Instructions (PDF)). Screenshot 1 Click the [Comm image compression method of the camera used for a camera channel where an event occurred server name, it is necessary to select "MANUAL" or "AUTO" for "DNS". Enter and periods (.). USER ID Enter a user ID (login name
  • Panasonic WJND200 | WJND200 User Guide - Page 64
    to notify a PC of event/error occurrence. Screenshot 1 Click the [Comm] button in the "Setup" panel and then click the "Panasonic Alarm protocol" tab to display the "Panasonic Alarm protocol" page. Step 1 Perform the following setup items. Port Number (to PC) Enter a port number to be used to
  • Panasonic WJND200 | WJND200 User Guide - Page 65
    authentication/host authentication [Basic Setup] Select "ON" or "OFF" to determine whether or not to authenticate the user/host (PCs). Screenshot 1 Click the [User Mng.] button in the "Setup" panel and then click the "Basic Setup" tab. The "Basic Setup" page will be displayed. Step 1 Perform the
  • Panasonic WJND200 | WJND200 User Guide - Page 66
    settings to assign priorities to operate this unit in case two or more users access this unit simultaneously. The priority of the administrators is "0" and single screen. 4A - 4D: Images of the camera group (4A - 4D) consist- ed in advance from 4 camera channels will be displayed on a 4-Screen. The
  • Panasonic WJND200 | WJND200 User Guide - Page 67
    , 16: lowest) to operate this unit in case two or more users access this unit simultaneously. Default Screen Select a startup display to be a single screen. 4A - 4D: Images of the camera group (4A - 4D) consist- ed in advance from 4 camera channels will be displayed on a 4-Screen. The settings for
  • Panasonic WJND200 | WJND200 User Guide - Page 68
    is impossible. --: Neither displaying live/recorded images nor control- ling cameras are possible. User Edit/Delete Edit or delete registered user information. Click the [i] button to select the desired user information to be edited or deleted. It is necessary to click the [SET] button after
  • Panasonic WJND200 | WJND200 User Guide - Page 69
    "0.0.0.0" or "*.*.*.*". Level Select a user level from the following. Operable functions for each level can be set in the "User Level" menu ( page 70). LV1 sequential display can be performed on the "Sequence Setup" window ("Camera" - "Sequence Setup"). Host Edit/Delete Edit or delete registered
  • Panasonic WJND200 | WJND200 User Guide - Page 70
    . Refer to page 71 for further information about each function. Step 2 Click the [SET] button after completing the settings. Note: Each parameter of user level is as follows: LV1: Possible to perform all the operations (Administrators) LV2: Possible to refer to the settings of the unit and the
  • Panasonic WJND200 | WJND200 User Guide - Page 71
    (Refer to the operating instructions (PDF).) Manual recording can be started and stopped. A recorded image can be played. It is possible to obtain recorded images from the SD memory card. Note: When checking the checkboxes of "Quick", "Camera Setup", "Comm Setup", "User Mng. Setup" and "Maintenance
  • Panasonic WJND200 | WJND200 User Guide - Page 72
    to the HDDs. The available capacity of the HDDs and the network status can be checked. Check version info, etc. [Product Information] Versions of the software, the hardware (this unit), MAC address, serial number, internal temperature and number of times when the [USE] button on the front panel is
  • Panasonic WJND200 | WJND200 User Guide - Page 73
    range of the images recorded on the HDDs. Refer to the operating instructions (PDF) for further information about the built-in hard disks of this unit. to check the IP addresses of the cameras connecting to this unit, line speed of this unit and users currently being logged in this unit. Screenshot
  • Panasonic WJND200 | WJND200 User Guide - Page 74
    Settings relating to the available disk space and images on the disk [Disk Setup] Perform the setting whether or not to write data when the available disk capacity is running out and the settings relating to images on the disk. Screenshot 1 Click the [Maintenance] button on the "Setup" panel and
  • Panasonic WJND200 | WJND200 User Guide - Page 75
    HDD Manual Delete By setting the date, images on the hard disk that were recorded Load" tab. The "Save/Load" page will be displayed. Step 1 User Setup Save Click the [SAVE] button to save the settings of setup menu in this unit. User Setup Load Click the [LOAD] button to load the saved settings to
  • Panasonic WJND200 | WJND200 User Guide - Page 76
    Settings relating to the disk configuration [Config] The FORMAT button inside the front cover can be enabled/disabled and the hard disk drives can be formatted on this page. Important: • When the "Config" page is displayed, all operations (recording, playback, etc.) except operations on this page
  • Panasonic WJND200 | WJND200 User Guide - Page 77
    Click the [Format] button. Notes: • The [Format] button changes its name according to the operational mode of the unit. Refer to the operating instructions (PDF) for further information about the operational mode of the unit. • All images recorded on the selected hard disk drive will be erased when
  • Panasonic WJND200 | WJND200 User Guide - Page 78
    Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution or a problem is not described below, and when having a problem with installations. Symptom Cause/solution
  • Panasonic WJND200 | WJND200 User Guide - Page 79
    sometimes not be refreshed. - • When turning on the power of this unit or when con- necting the LAN cable to the network port when the camera is active, images may not be displayed/ recorded in a normal manner for around a minute (at - a maximum) just after turning on the power of this unit
  • Panasonic WJND200 | WJND200 User Guide - Page 80
    the driver of the display adapter to the latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following instructions are for Windows XP. (1) After closing all browser windows, right-click on the desktop and select "Properties" from
  • Panasonic WJND200 | WJND200 User Guide - Page 81
    them. • When M-JPEG is selected for the image compression method of the camera, live images may not be displayed in the image display area and black screen normally. 47 40 48, 56 - • When logged in with "Limited" user account of Windows operating system, images will not be dis- played since the
  • Panasonic WJND200 | WJND200 User Guide - Page 82
    conform them. • Are the settings of the network camera set correctly? Check the model of the set camera on the setup 47 menu ("Camera" - "NW Camera Setup"). • Are the user ID and the password for the network camera set correctly? Check if the user ID and password are set correctly 50 on the
  • Panasonic WJND200 | WJND200 User Guide - Page 83
    Pack2 (SP2) is installed The following may occur during operation when using a PC on which Windows XP Service Pack2 (SP2) is installed. Follow the instructions below when the following occurred. By performing the following solutions, other applications and the security level may not be affected
  • Panasonic WJND200 | WJND200 User Guide - Page 84
    Symptom An unnecessary status bar or scroll bar is displayed on the pop-up window. Solutions • Click "Internet Options" on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level...] button to open the "Security Setting" window. Under "Miscellaneous",
  • Panasonic WJND200 | WJND200 User Guide - Page 85
    accordance with national legislation. For business users in the European Union If you wish Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Network Disk Recorder
Setup Instructions
Model No.
WJ-ND200
Network Disk Recorder WJ-ND200
ERROR
REC
OPERATE
TIMER
ALARM
ALARM
SUSPEND
BUZZER
STOP
LINK
/ACT
MIRROR
HDD1
HDD2