Panasonic WJSX150A WJSX150A User Guide

Panasonic WJSX150A - SWITCHER/MULTIPLEXER Manual

Get Panasonic WJSX150A - SWITCHER/MULTIPLEXER PDF manuals and user guides
UPC - 791871504024
View all Panasonic WJSX150A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic WJSX150A manual content summary:

  • Panasonic WJSX150A | WJSX150A User Guide - Page 1
    Matrix Switcher Operating Instructions Model No. WJ-SX150A OPERATE OIFPCEOROATLEINLGEFDAWN IMLLABLFLUINNKCTIONS 150 Matrix Switcher WJ-SX A Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
  • Panasonic WJSX150A | WJSX150A User Guide - Page 2
    operating and maintenance (servicing) instructions in the literature with the limits for a Class A digital device, pursuant to Part 15 of the in accordance with the instruction manual, may cause harmful in the event of theft. Model No. WJ-SX150A Serial No. WARNING: To prevent fire or electric
  • Panasonic WJSX150A | WJSX150A User Guide - Page 3
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Panasonic WJSX150A | WJSX150A User Guide - Page 4
    Event 18 ■ System Status Table 19 ■ Setup Procedures 19 ■ Extended Functions 19 NOTIFICATION ABOUT PS·DATA CONTROLLER OPERATION 22 DETAILED PRODUCT DESCRIPTION 23 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS 24 ■ WJ-SX150A Matrix Switcher 24 ■ WV-CU360C/CU360CJ System Controller (TERMINAL
  • Panasonic WJSX150A | WJSX150A User Guide - Page 5
    Displaying WJ-HD200 Series SETUP MENU .......135 ■ Controlling Digital Disk Recorder WJ-HD200 Series 135 WJ-HD100 SERIES CONTROL MUX (TERMINAL MODE 137 ■ Displaying WJ-HD100 Series SETUP MENU .......137 ■ Controlling Digital Disk Recorder WJ-HD100 Series 137 TIME-LAPSE VCR CONTROL MUX [PANASONIC
  • Panasonic WJSX150A | WJSX150A User Guide - Page 6
    PREFACE Matrix Switcher WJ-SX150A is designed for a surveillance control system, which is composed of cameras, monitors and system controllers. System controllers are used to operate the surveillance control system. In combination with Digital Disk Recorder or a time-lapse VCR, a surveillance system
  • Panasonic WJSX150A | WJSX150A User Guide - Page 7
    instructions use the following convention when describing the use and operation of this unit. Unit: Panasonic Matrix Switcher WJ-SX150A Multiplexer board : Panasonic Multiplexer Board WJ-SXB151 MUX System controller: Panasonic System Controller WV-CU360C or WV-CU360CJ Recorder: Panasonic Digital
  • Panasonic WJSX150A | WJSX150A User Guide - Page 8
    FEATURES OF THE MATRIX SWITCHER SYSTEM 9
  • Panasonic WJSX150A | WJSX150A User Guide - Page 9
    MATRIX SWITCHER SYSTEM DESCRIPTIONS Matrix Switcher System WJ-SX150A is a surveillance control system, which is composed of cameras, recorders, and this unit (the matrix switcher). This system has various functions for surveillance control. The following are the descriptions about the functions. ■
  • Panasonic WJSX150A | WJSX150A User Guide - Page 10
    supports the terminal mode, and the DATA 4 port supports both the terminal mode and Panasonic Security Data (PS·Data) Systems. These are the operation mode of the matrix switcher via the coaxial cable from the unit, multiplexed with the camera image. The unit is equipped with the circuit to multiplex
  • Panasonic WJSX150A | WJSX150A User Guide - Page 11
    the surveillance system in a parking lot as an example. Before the connections, the matrix switcher's system configuration* and the recorder's alarm recording setting are necessary. Example: Operations of cameras and other connected equipment during an alarm input 1. The infrared sensor sends an
  • Panasonic WJSX150A | WJSX150A User Guide - Page 12
    office. Receiver Camera 6 Aux 1 Aux 2 Camera 5 Camera 4 Camera 1 Preset position 2 Preset position 1 Sensor Recorder t t Alarm Sequence mode Matrix switcher Alarm 3 t Monitor 1 s s Camera 1 Dwell time : 1 s Monitor 2 s Camera 4/position 1 Dwell time : 3 s s Camera 4/position
  • Panasonic WJSX150A | WJSX150A User Guide - Page 13
    log-out has two ways: One is the manual log-in/log-out and the other is cameras and sequences operable by the level. Notes: • Each operator's ID, password, level and priority need to be configured in SETUP MENU and WJ-SX150A Administrator Console. • Auto log-in/log-out is configurable in WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 14
    title Event ● Monitor Selection It is necessary to select a monitor when controlling the monitor-related functions, such as camera images or SETUP MENU. ● Information Displayed on the Monitors The following information is displayed on monitors. Time and Date Time and date are displayed. The
  • Panasonic WJSX150A | WJSX150A User Guide - Page 15
    • Up to 4 group sequences are configurable in WJSX150A Administrator Console. The configuration in the matrix switcher's SETUP MENU is unavailable. • The black picture is displayed when the following are included in a tour or group sequence: a camera channel without image or the image restricted to
  • Panasonic WJSX150A | WJSX150A User Guide - Page 16
    • The mode is selectable and configurable in SETUP MENU (OSD) or WJ-SX150A Administrator Console. • Even in the alarm mode, pressing the ACK button can control the camera's pan/tilt, zoom, focus and lens iris. • When a recorder is connected to the matrix switcher, the alarm-related recording of the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 17
    Table While the unit's power is ON, the video signal loss from a camera or a recorder can occur by cable disconnection, etc. In this case, video WJ-SX150A Administrator Console. The available operations: Tour sequence and spot mode The available timer events: Up to 50 Note: When displaying SETUP
  • Panasonic WJSX150A | WJSX150A User Guide - Page 18
    unit. Refer to p. 63 WJ-SX150A SETUP MENU (OSD) and p. 79 WJ-SX150A ADMINISTRATOR CONSOLE for details. • The search for the recorded image • Forward or backward search • Forward of backward field advance • Fast-forward • Rewind • Index Refer to each device's operating instructions for details. 19
  • Panasonic WJSX150A | WJSX150A User Guide - Page 19
    the matrix switcher. With the Multiplexer board installation, the following will be available. • Multiscreen display More than one camera images can be displayed in 4, 9, and 16 multiscreens. The sequence output is also available. As the sequence output, the following are configurable in WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 20
    on the WJ-HD100 Series or time-lapse VCR, an optional Multiplexer board needs to be installed in this unit. • Only Panasonic time-lapse VCRs supporting RS232C are operable. ● Master-slave Connection When applying this connection, up to 5 matrix switchers (units) and 64 cameras can be connected
  • Panasonic WJSX150A | WJSX150A User Guide - Page 21
    to the DATA 4 port. For example, if you connect a PS·Data unit supporting network connections (refer to p. 42), remote-control of the unit and the PS· to the system controller. Refer to the system controller's operating instructions. • Use the PS·Data template supplied with the system controller
  • Panasonic WJSX150A | WJSX150A User Guide - Page 22
    DETAILED PRODUCT DESCRIPTION 23
  • Panasonic WJSX150A | WJSX150A User Guide - Page 23
    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ WJ-SX150A Matrix Switcher ● Front View q OPERATE OPERATE LED WILL BLINK IF COOLING FAN MALFUNCTIONS we r RESET UNIT MODE 9 0 1 ON 1234 78 23 456 Matrix Switcher WJ-SX A q Operation indicator (OPERATE) Lights up when the power of the unit is
  • Panasonic WJSX150A | WJSX150A User Guide - Page 24
    SETUP MENU and WJ-SX150A Administrator Console is required. (Refer to pp. 61 to 102 for details.) !2 Line selector (LINE SELECT 2/4) Lets you select either full duplex (4 lines) or half duplex (2 lines) for RS-485 cameras. !3 Camera Switching Input connector (CAMERA of the matrix switcher on and
  • Panasonic WJSX150A | WJSX150A User Guide - Page 25
    ) ● Front View (WV-CU360CJ) @0 @1 @2 @3 @4 @5 @6 @7 %3 #8 #9 $0 $1 $3 $2 $4 $6 $5 $9 OPERATE LINK ALARM MONITOR CAMERA 360 BUSY PROHIBITED System Controller WV-CU C For Matrix Switcher (WJ-SX150A) F1 ACK RESET IRIS CLOSE OPEN CAM SETUP SUSPEND ALL RESET CALL AUTO IRIS UP F2
  • Panasonic WJSX150A | WJSX150A User Guide - Page 26
    cameras equipped with this feature. To execute camera functions, press this button in combination with the numeric buttons.(The specified cameras support Function 1 button (F1/CAM SETUP) Press this button while holding down the SHIFT button to open the camera's SETUP MENU on the active monitor. The
  • Panasonic WJSX150A | WJSX150A User Guide - Page 27
    Moving the control to the left will zoom out the image. %4 Joystick Use this joystick to manually operate cameras, camera site accessories and a recorder, or to move the cursor in SETUP MENU on the active monitor screen. }: Up {: Down [: Left, rewind*, backward field advance* ]: Right, fast-forward
  • Panasonic WJSX150A | WJSX150A User Guide - Page 28
    ON 12 3 4 56 78 MODE Note: When you use a PS·Data system controller, refer to the system controller's operating instructions. %8 Data ports (DATA) Exchange the control data with the matrix switcher via RS-485 cable (supplied with the system controller). %9 DC 9V Input jack (DC 9V IN) Use this jack
  • Panasonic WJSX150A | WJSX150A User Guide - Page 29
    INSTALLATIONS AND SYSTEM CONNECTIONS 31
  • Panasonic WJSX150A | WJSX150A User Guide - Page 30
    be made by qualified service personnel or system installers. ■ Mounting into the Rack The matrix switcher can be mounted into WJ-HD100 Series or a time-lapse VCR as a recorder, you need to install a Multiplexer board inside the matrix switcher. Refer to the Multiplexer board's operating instructions
  • Panasonic WJSX150A | WJSX150A User Guide - Page 31
    1 2 Camera 3 Camera 16 CAMERA IN 1 to 16 ALARM IN 1 to 16 Matrix Switcher Terminal-mode PS·Data/Terminal-mode MONITOR OUT 1 to 4 Max. 4 System Controllers Note: Before connecting a terminal-mode system controller to the DATA 4 port, configure the system through SETUP MENU or WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 32
    system through SETUP MENU or WJ-SX150A Administrator Console. • If an optional network board is installed inside the recorder and you are to control it from LAN (local area network) or the Internet, refer to a service manual procurable in your area. ● Connection with Digital Disk Recorder WJ-HD100
  • Panasonic WJSX150A | WJSX150A User Guide - Page 33
    1 Camera 2 Camera 3 Camera 16 CAMERA IN 1 to 16 Camera 17 Camera 18 Camera 19 Camera 32 CAMERA IN 1 to 16 Matrix Switcher Slave 1 ALARM IN 1 to 16 Camera 33 Camera 34 Camera 35 Camera 48 CAMERA IN 1 to 16 Matrix Switcher Slave 2 ALARM IN 1 to 16 Camera 49 Camera 50 Camera 51 Camera
  • Panasonic WJSX150A | WJSX150A User Guide - Page 34
    the RS-485 camera(s) to DATA 1, 2 and/or 3, configure the system through WJ-SX150A Administrator Console. AUX Alarm DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 RS485(CAMERA) 16 10 9 8 7 6 5 4 3 2 1 IN OUT 16 10 9 8 7 6 5 4 3 2 1 CAMERA Matrix Switcher 36
  • Panasonic WJSX150A | WJSX150A User Guide - Page 35
    or 4. Notes: • Before connecting RS-485 cameras to DATA1 to 3, data port setting through WJ-SX150A Administrator Console is necessary. (Refer to p. DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 PS•DATA RS485(CAMERA) Matrix Switcher RS485 Port Matrix switcher's rear panel RB RA TB TA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 36
    and others (For the termination switch positions, refer to the operating instruction of the corresponding unit.) ■ Connection with the Monitors Connect the Switcher 3 1 DATA HDR DATA 4 TERM OFF ON DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 PS•DATA RS485(CAMERA) Matrix Switcher Set
  • Panasonic WJSX150A | WJSX150A User Guide - Page 37
    RS485(CAMERA) LINE 2 SELECT 4 PS•DATA RS485(CAMERA) Matrix Switcher ■ need to change the data port setting through SETUP MENU or WJ-SX150A Administrator Console. (Refer to pp. 74 or SETUP MENU (OSD) or WJSX150A you connect Digital Disk Recorder WJ-HD100 Series to the matrix switcher, set
  • Panasonic WJSX150A | WJSX150A User Guide - Page 38
    ■ Connection with Digital Disk Recorder WJ-HD500 Series Note: Refer to a service manual procurable in your Matrix Switcher EXT IN MONITOR OUT ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 EXT IN (PLAY IN) CAMERA SW IN 3 1 PS•DATA RS485(CAMERA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 39
    address is set to 1 through SETUP MENU or WJ-SX150A Administrator Console. (Refer to pp. 71 or 97.) If another number is selected, you cannot control the recorder. Matrix Switcher EXT IN ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 EXT IN (PLAY
  • Panasonic WJSX150A | WJSX150A User Guide - Page 40
    (Refer to WJ-HDB502 Operating Instructions.) 6. Refer to p. 38, p. 40 and p. 41 for MONITOR OUT connection, MULTI SCREEN OUT connection, and EXT IN connection. Monitor Matrix Switcher EXT IN MONITOR OUT ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT
  • Panasonic WJSX150A | WJSX150A User Guide - Page 41
    ■ Connection with Digital Disk Recorder WJ-HD200 Series Note: Refer to a service manual procurable in your Matrix Switcher MONITOR OUT ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 EXT IN (PLAY IN) CAMERA SW IN 3 1 EXT IN PS•DATA RS485(CAMERA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 42
    of WJ-SX150A Administrator Console. 6. Through a browser or the recorder's SETUP MENU, set the CTL-UNIT ADDR to a number other than 1. (Refer to the recorder's operating instructions.) Monitor Matrix Switcher MONITOR OUT ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 43
    . (Refer to the recorder's operating instructions for the unit address.) Note: After the connection, configure the system through SETUP MENU and WJ-SX150A Administrator Console. Pin #13 (Recover Input) Pin #10 (Alarm Out 1) Pin #11 (Alarm Out 3) Matrix Switcher Pin #24 (Alarm Out 4) ALARM
  • Panasonic WJSX150A | WJSX150A User Guide - Page 44
    . Notes: • Only Panasonic time-lapse VCRs which support RS-232C are usable. (Refer to Cable Specifications on the next page for details of cables.) • Both of the time-lapse VCR and PC cannot be connected to the matrix switcher. • When configuring the system through WJ-SX150A Administrator Console
  • Panasonic WJSX150A | WJSX150A User Guide - Page 45
    with the Time-lapse VCR (Non-Panasonic Models) MUX 1. To record the camera images through a time-lapse VCR, install an optional Multiplexer board in the matrix switcher. 2. Select OFF for 600 RECORDER in SETUP MENU. (Refer to p. 71.) 3. Connect the matrix switcher's EXT OUT (REC OUT) to the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 46
    time adjusting signal to the matrix switcher. This signal can adjust the time by up to ± 30 seconds every hour. To use this function, it is necessary to assign the alarm input terminal(s) (pin # 1 to 16) to the time adjusting terminal(s). SETUP MENU or WJ-SX150A Administrator Console can assign the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 47
    are master-slave connection patterns. Pattern 1: Master and Slave 1 are connected in the system. Slave 1 Camera 1 to 16 HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A MON1→CAM1 MON2→CAM2 MON3→CAM3 MON4→CAM4 Master Camera 17 to 28 HDR PSD D3 D2 D1 CAM REC FS 16
  • Panasonic WJSX150A | WJSX150A User Guide - Page 48
    Pattern 2: Master, Slave 1 and 2 are connected in the system. Slave 1 Camera 1 to 16 Slave 2 Camera 17 to 32 HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A MON1→CAM1 MON2→CAM2 MON3→CAM3 MON4→CAM4 MON1→CAM5
  • Panasonic WJSX150A | WJSX150A User Guide - Page 49
    , Slave 1 to 3 are connected in the system. Slave 1 Camera 1 to 16 Slave 2 Camera 17 to 32 Slave 3 Camera 33 to 48 HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A MON1→CAM1 MON2→CAM2 MON3→CAM3 MON4→CAM4
  • Panasonic WJSX150A | WJSX150A User Guide - Page 50
    Camera 1 to 16 Slave 2 Camera 17 to 32 Slave 3 Camera 33 to 48 Slave 4 Camera 49 to 64 HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ-HD A HDR PSD D3 D2 D1 CAM REC FS 16 Digital Disk Recorder WJ can see the firmware version of each unit in SETUP MENU. (Refer to pp. 72 and 73
  • Panasonic WJSX150A | WJSX150A User Guide - Page 51
    3 Master and Slave 4 Master Camera Input 1 Camera Input 2 Camera Input 3 Camera Input 4 Camera Input 5 Camera Input 6 Camera Input 7 Camera Input 8 Camera Input 9 Camera Input 10 Camera Input 11 Camera Input 12 Camera Input 13 Camera Input 14 Camera Input 15 Camera Input 16 Slave Monitor Output
  • Panasonic WJSX150A | WJSX150A User Guide - Page 52
    is as follows. (The logical camera numbers can be configured in SETUP MENU and WJ-SX150A Administrator Console.) Camera total number 1 to 16 17 to 28 29 to 40 41 to 52 53 to 64 Cameras connected Cameras connected Cameras connected Cameras connected Cameras connected to Master to Slave 1 to
  • Panasonic WJSX150A | WJSX150A User Guide - Page 53
    the main window (refer to p. 80) to quit WJ- SX150A Administrator Console. ● Recorder Setup When connecting a recorder with more than one video input (WJ-HD500 or WJ-HD200 Series), conform the LCN (logical camera number) settings of the unit to the camera number setting of a recorder. (Refer to pp
  • Panasonic WJSX150A | WJSX150A User Guide - Page 54
    WJ-SX150A SETUP PROCEDURES 57
  • Panasonic WJSX150A | WJSX150A User Guide - Page 55
    SX150A Program Writer 1. Connect the matrix switcher's serial port to that of the PC with the 9-pin D-sub cable. (Refer to p. 48.) 2. Launch SX150A Program Writer by selecting "Start" - "Programs" - "Panasonic" - "SX150A baud rate to the SERIAL port setting in 740 CAMERA/DATA 1 - 4 PORT. (Refer to pp
  • Panasonic WJSX150A | WJSX150A User Guide - Page 56
    for SX150A window matrix switcher. It may cause trouble. 17. After COMPLETED!!" is displayed, power off the matrix switcher. 18. Set the mode selector of the matrix switcher as follows. MODE ON 1234 19. Display the matrix switcher's SETUP MENU. (Refer to the matrix switcher's operating instructions
  • Panasonic WJSX150A | WJSX150A User Guide - Page 57
    is started. This error message is displayed when the matrix switcher's mode is not "SX150 SOFTWARE UPLOAD". To solve this problem, do the following. 1. Power off the matrix switcher. 2. Set the mode selector of the matrix switcher to "SX150 SOFTWARE UPLOAD". (Refer to p. 24.) 3. Power on the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 58
    , operators and schedules, etc. 61 SETUP MENU (OSD) • WJ-SX150A Administrator Console (PC) All the functions of this unit (except camera manual cleaning) are configurable. You need a PC to use WJ-SX150A Administrator Console. Refer to p. 79 WJ-SX150A ADMINISTRATOR CONSOLE for details on the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 59
    above settings will be invalid. Refer to the system controller's operating instructions. ● System Settings SETUP MENU can configure the clock (time and date), cable compensation and camera title. Besides these settings, WJ-SX150A Administrator Console can select the data ports' baud rates. • Clock
  • Panasonic WJSX150A | WJSX150A User Guide - Page 60
    WJ-SX150A SETUP MENU (OSD) The WJ-SX150A SETUP MENU (SETUP MENU) enables function controls that are not available by direct operation. Note: Only one operator can enter SETUP MENU. ■ Displaying SETUP MENU To display SETUP MENU, follow the procedure below. 1. Confirm that the camera and peripherals
  • Panasonic WJSX150A | WJSX150A User Guide - Page 61
    ■ TIME & DATE WJ-SX150A SETUP MENU x.xx 100 TIME&DATE 200 D.S.T. Aug/21/2002 10:55 AM ON 300 SEQUENCEO 400 ALARMO 500 CAMERA TITLEO 600 RECORDERO 700 SYSTEMO 800 OPERATOR REGISTRATIONO 900 MULTIPLEXERO 1000 MUX CAMERA TITLEO ● How to Display To display this menu on the monitor, move the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 62
    WJ-SX150A SETUP MENU x.xx 100 TIME&DATE 200 D.S.T. Aug/21/2002 10:55 AM ON 300 SEQUENCEO 400 ALARMO 500 CAMERA TITLEO 600 RECORDERO 700 SYSTEMO 800 OPERATOR REGISTRATIONO 900 MULTIPLEXERO 1000 MUX CAMERA TITLEO Outside the U. S.: · Aug/21/2002... 21/08/2002 · D. S. T.... SUMMER TIME 300
  • Panasonic WJSX150A | WJSX150A User Guide - Page 63
    Time) WJ-SX150A SETUP MENU x.xx 100 TIME&DATE 200 D.S.T. Aug/21/2002 10:55 AM ON 300 SEQUENCEO 400 ALARMO 500 CAMERA TITLEO 600 RECORDERO 700 SYSTEMO 800 OPERATOR REGISTRATIONO 900 MULTIPLEXERO 1000 MUX CAMERA TITLEO Notes: • The start/end date are configurable through WJSX150A Administrator
  • Panasonic WJSX150A | WJSX150A User Guide - Page 64
    is selected for CAM. • The available preset position numbers differ among cameras. Refer to each camera's operating instructions. ■ ALARM SETUP 400 ALARM 410 ALARM MODE SEQUENCE / DWELL 2sec 420 ALARM EVENT ALARM INPUT 430 CAMERA OFF 440 ALARM PORT ONO 450 SERIAL PORT ON 460 MUX
  • Panasonic WJSX150A | WJSX150A User Guide - Page 65
    to 8, recorder number will be displayed even camera channels (CAM 9 to 16) not connected to the recorder. ALARM PORT: When an alarm port pin set here receives an input signal, the designated event is activated. MASTER, SLAVE 1 to 4 is available for the matrix switcher. 1 to 16 is available for the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 66
    Move the cursor and press the CAM (SET) button to go into the menu. SWITCHER: Select a unit (SLAVE1 to 4 and MASTER*) to configure the parameters. * MUX This stands for that the unit's motion detector is activated when a camera detects the brightness-level change and transmit an alarm signal. ON: The
  • Panasonic WJSX150A | WJSX150A User Guide - Page 67
    of the camera channel will be cleared. • Depending on the sensitivity level, a motion-detection area needs the following area sizes. Sensitivity LOW MID HIGH Area size 17 x 17 steps or more 12 x 12 steps or more 5 x 5 steps or more You can change the sensitivity level in WJ-SX150A Administrator
  • Panasonic WJSX150A | WJSX150A User Guide - Page 68
    ). • When moving the joystick to ▲ at the top of CAMERA TITLE 2 of 2, the monitor will display 1 of 2 (the previous page). • Original characters are configurable through WJSX150A Administrator Console, but they are not displayed correctly in SETUP MENU. They are displayed as ■. (Refer to p. 95 Edit
  • Panasonic WJSX150A | WJSX150A User Guide - Page 69
    Panasonic model) is connected to the unit. HD100: Select this when a WJ- the recorder's unit address. When a digital disk recorder is connected to the unit SETUP 700 SYSTEM 710 MASTER-SLAVEO 720 LOGICAL CAMERA NUMBERO 730 COMPENSATION/VD2/DATAO 740 CAMERA/DATA1-4 PORTO 750 RS485 CAMERAO 760 CAMERA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 70
    when the MASTER-SLAVE composition is changed. Is the MASTER-SLAVE changed? NO 720 LOGICAL CAMERA NUMBER SWITCHER=SLAVE2(2 of 4) CAM LCN 1 17 2 18 3 19 4 20 5 21 6 To change the setting, select "YES" and press the SET button. SETUP MENU will be closed, but the setting will be activated. • To
  • Panasonic WJSX150A | WJSX150A User Guide - Page 71
    output signal, select ON. Not to send the control data with the camera output signal, select OFF. The factory default setting is ON. * The available camera numbers will differ depending on the total number of matrix switchers. Notes: • When moving the joystick to ▼ at the bottom of COMPENSATION/VD2
  • Panasonic WJSX150A | WJSX150A User Guide - Page 72
    WJ-SX150A Administrator Console configuration and firmware update becomes available with a PC connection. VCR: Select this if a time-lapse VCR (Panasonic model) is connected. - - -: This port is unusable. The following are MODE parameters assigned to each port. Master Port Normal connection CAMERA
  • Panasonic WJSX150A | WJSX150A User Guide - Page 73
    to p. 91) of WJ-SX150A Administrator Console what kind of restriction is given to the operator. 1 to 3 is available. SWITCHER: Select a unit (SLAVE1 to 4 and MASTER*) to configure the parameters. * In normal connection, only MASTER is displayed. CAM: This stands for a camera channel of the unit
  • Panasonic WJSX150A | WJSX150A User Guide - Page 74
    camera image on the monitor, but cannot control the panning/tilting. PROHIBITED: The operator can neither display the camera entry. ■ MULTIPLEXER MUX 900 MULTIPLEXER SWITCHER=SLAVE1(1 of 5) VCR REC MODE 910 monitor, move the cursor to 900 MULTIPLEXER in SETUP MENU by moving the joystick to D or
  • Panasonic WJSX150A | WJSX150A User Guide - Page 75
    . Confirm the images on those which are connected to the recorder. ■ MUX CAMERA TITLE MUX 1000 MUX CAMERA TITLE SWITCHER=SLAVE1(1 of 3) CAM LCN TITLE 1 1 C01 2 2 C02 3 3 LOGICAL CAMERA NUMBER ● How to Display To display this menu on the monitor, move the cursor to 1000 MUX CAMERA TITLE in SETUP
  • Panasonic WJSX150A | WJSX150A User Guide - Page 76
    Camera Title (p. 94) • Data Port (p. 96) • Recorder (p. 97) • Multiplexer Mode (p. 98) MUX • Multiplexer Title (p. 100) MUX WJ-SX150A Administrator Console • New (p. 101) • Select Setup the following directory: C: \Program Files\Panasonic\SX150A ■ Installation/Uninstallation ● Installation Insert the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 77
    Start" - "Program" - "Panasonic" - "WJ-SX150A Administrator Console x.xx*" or double-click the "WJSX150A Administrator Console x.x" icon on the 2. Enter "admin" and "sx150" in the boxes "Name" and "Password" respectively. Then, click on the OK button. →WJ-SX150A Administrator Console starts up and
  • Panasonic WJSX150A | WJSX150A User Guide - Page 78
    (New): New window (p. 101) (File Open): Select Setup Data File window (p. 101) (Account Manager): Account Manager window (p. 101) (Communication Port): Communication Port window (p. 102) (Panasonic): Opens the version information window of WJSX150A Administrator Console. Clicking on "OK" button will
  • Panasonic WJSX150A | WJSX150A User Guide - Page 79
    Cancels the configuration and closes the Logical Camera Number window. Notes: • If logical camera numbers are not selected, the cameras' LCNs are not displayed in each window of SETUP MENU and WJ-SX150A Administrator Console. • You can select a logical camera number for only one channel. When you
  • Panasonic WJSX150A | WJSX150A User Guide - Page 80
    from the PC to the unit, click on this button. Notes: • The setup file has been configured at the factory, and the file names appear on the to the unit. Confirm the settings of WJ-SX150A Administrator Console and retry the file putting. (Refer to p. 74 CAMERA/DATA 1-4 PORT and p. 102 Communication
  • Panasonic WJSX150A | WJSX150A User Guide - Page 81
    64. Note: Refer to p. 109 Program Preset Position for details of how to program preset positions. Dwell Selects the dwell time of the operating camera. The dwell time is selectable from 1 to 30 seconds (by a second). Set "--" for Dwell when you have selected "--" for Cam. (DELETE) button Deletes the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 82
    ■ Group Sequence This window configures the parameters of group sequences. Each group sequence has up to 4 tour sequences which are assigned to the monitors. ■ Timer Event This window configures the parameters of timer events: the schedule (daily, weekly or monthly) and action. Up to 50 events are
  • Panasonic WJSX150A | WJSX150A User Guide - Page 83
    Timer Event window. Notes: • In order to stop a scheduled event on a monitor, you need to program another event or manually select another activity. (For example, you need to select a camera or run a tour.) • If you set more than one event with the same schedule, the event with the smallest number
  • Panasonic WJSX150A | WJSX150A User Guide - Page 84
    Notes: • When the camera cleaning is active, cleaning will begin from LCN 1 in numerical order. • Surveillance is impossible during the cleaning. • The cleaning cannot be stopped after it is
  • Panasonic WJSX150A | WJSX150A User Guide - Page 85
    images. Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected. OFF: An alarm input is accepted neither via the CAMERA IN connectors nor the RS-485 ports. The factory default setting is OFF. Alarm Port This stands for that an alarm input is accepted via
  • Panasonic WJSX150A | WJSX150A User Guide - Page 86
    details of operation parameters when an alarm signal is input: the monitor and mode to display the alarm image, and the preset position of the camera. Up to 99 alarm inputs are configurable. ● Sensitivity MUX When you press this button, the Sensitivity window will appear. In this window, you can
  • Panasonic WJSX150A | WJSX150A User Guide - Page 87
    . 1 to 16 is selectable. To deactivate the alarm event, select "- -". Notes: • If having selected a tour sequence for a monitor, another tour number or spot camera will not be available when selecting the monitor for another alarm event. That will result in an error. • Each Alarm Port and Num can be
  • Panasonic WJSX150A | WJSX150A User Guide - Page 88
    from WJ-SX150A after SX150A Setup: Setting up this matrix switcher system Camera Setup: Setting up the cameras Program Preset Position: Registering a camera's pre- set position Camera Control: Controlling a camera Camera Selection: Selecting a camera Recorder Setup: Displaying the recorder's setup
  • Panasonic WJSX150A | WJSX150A User Guide - Page 89
    ■ Monitor Selection This window determines whether a system controller or PC can select a monitor. ■ Auto Login/Logout (Auto Login/Log-out) This window configures the auto log-in/log-out parameter of each data port. An operator is selectable for auto log-in function. ● How to Display To display
  • Panasonic WJSX150A | WJSX150A User Guide - Page 90
    on the ▼ or ▲ buttons of Year, Month, Day, Hour and/or Minute (Put to SX150A) button: Changes the unit's clock time into the one which has been configured in this window. by click- ing the (Put to SX150A) button in this win- dow. The setup file update will be necessary. (Refer to p. 83 Put a File
  • Panasonic WJSX150A | WJSX150A User Guide - Page 91
    send the VD2 timing pulse or control data with the camera output signals. ■ Camera Title This window configures the title for each camera. Up to 20 characters (camera title + alphanumeric characters) are available for the title. WJ-SX150A Administrator Console has the following built-in characters
  • Panasonic WJSX150A | WJSX150A User Guide - Page 92
    character will be inserted in the text box. To Cancel the Entry Click on the (Cancel Exit) button. The entry will be canceled and the Camera Title window will close. 95 The Window during the Edit • How to Display To display this window, click on the Edit Font button in the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 93
    this point. After closing the Edit Font window, be sure to return to the Camera Title window and click on the (Save Exit) but- ton. • To Copy DATA HDR port): the protocol, the baud rate (communication speed), and the connected cameras. Notes: • The baud rate of DATA HDR is the same as that of
  • Panasonic WJSX150A | WJSX150A User Guide - Page 94
    to 3 is fixed to Camera. • DATA 4 is selected for 600 RECORDER in SETUP MENU (refer to p. 71 WJ-HD500 Series recorder is connected to the unit. HD100: Select this when a WJ-HD100 Series recorder is connected to the unit. MUX HD200: Select this when a WJ in SETUP MENU. (Refer to RECORDER in
  • Panasonic WJSX150A | WJSX150A User Guide - Page 95
    is selected, the maximum rate recording becomes unavailable for WJ-HD500 Series. • To use WJ-HD100 Series or a time-lapse VCR, the quad (Camera 1, 2, 3 and 4) 4B = Page 2 of the quad (Camera 5, 6, 7 and 8) 4C = Page 3 of the quad (Camera 9, 10, 11 and 12) 4D = Page 4 of the quad (Camera 13,
  • Panasonic WJSX150A | WJSX150A User Guide - Page 96
    16 parameters. (Refer to p. 100 Mux Alarm Group.) OFF: Select this to deactivate the alarm priority mode. The factory default setting is OFF. • System Group Camera SW Loss: Select the desired setting by clicking on the drop-down menu. ON: "CAM SW LOSS" will blink on the associated monitor when loss
  • Panasonic WJSX150A | WJSX150A User Guide - Page 97
    ) button Cancels the configuration and closes the Mux Alarm Group window. ● Parameters The factory default settings are same as the illustration. To edit the desired camera's title, click on the associated button (Cam 1 to Cam 16). The subsequent editing procedure is the same as
  • Panasonic WJSX150A | WJSX150A User Guide - Page 98
    during the edit ■ Select Setup Data File The setup file is selectable by pressing this button. Refer to the operating instructions of Windows® for details on If there is no level 1 operator, the configuration of WJ-SX150A Administrator Console will become impossible. ● Parameters • Accounts Group
  • Panasonic WJSX150A | WJSX150A User Guide - Page 99
    . 2. Click on the (Delete) button. 3. Click on the (Save exit) button. Note: If deleting all level 1 operators, the configuration of WJ-SX150A Administrator Console will become impossible. ■ Communication Port This window configures the PC's usable communication port number and its baud rate
  • Panasonic WJSX150A | WJSX150A User Guide - Page 100
    OPERATING PROCEDURES (TERMINAL MODE) 103
  • Panasonic WJSX150A | WJSX150A User Guide - Page 101
    H VLD H SYS S SEQUENCE DEF OFF DEF ON MON (ESC) CAM (SET) MON LOCK MULTI SCREEN SEL WIPER 4. To select your registered password (up to 5 digits), press the numeric buttons, then press the CAM (SET) button. The factory default setting is 150. If the operator ID and password are correct, "READY
  • Panasonic WJSX150A | WJSX150A User Guide - Page 102
    then "READY" automatically appears. Auto log-in is configurable through WJ-SX150A Administrator Console. [Refer to p. 92 Auto Login/Logout (Auto Log appears on the LED display. • The time to logout is configurable through WJSX150A Administrator Console. [Refer to p. 92 Auto Login/Logout (Auto Log-in
  • Panasonic WJSX150A | WJSX150A User Guide - Page 103
    log-in procedure, the following operations are available to control the system. The operation begins with selecting a monitor, then the selected camera appears the active monitor. ■ Monitor Selection 1. To select the desired monitor number (1 to 4), press the numeric button. 2. Press the MON (ESC
  • Panasonic WJSX150A | WJSX150A User Guide - Page 104
    number. 5. To replace the currently selected camera with the next higher-numbered camera , press the NEXT button. 6. To replace the currently selected camera with the next lower-numbered camera, press the PREV button. F1 ACK RESET CAM SETUP F2 SUSPEND GROUP SEQ ALL RESET TOUR SEQ INDEX REW
  • Panasonic WJSX150A | WJSX150A User Guide - Page 105
    are required to utilize these functions. Note: Refer to the cameras' operating instructions whether to confirm that each function is available. ■ Lens /Tilt Control ● Manual Operation 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Move
  • Panasonic WJSX150A | WJSX150A User Guide - Page 106
    Press the CALL PRESET button to move to the preset position of the selected camera on the active monitor. TOUR SEQ T&D CAM ID EVENT CALL PRESET NEXT position, it will be overwritten by the new one. • SETUP MENU and WJ-SX150A Administrator Console can configure each operator's pan/tilt control. (
  • Panasonic WJSX150A | WJSX150A User Guide - Page 107
    the defaults. Notes: • Refer to the operating instructions of the selected camera for details. • Move the joystick while holding down the SHIFT button to move the camera smoothly for presetting the positions in the camera's SETUP MENU. 8. To close the camera's SETUP MENU, press the F1 button while
  • Panasonic WJSX150A | WJSX150A User Guide - Page 108
    PLAY OSD PAUSE SEQUENCE DEF OFF DEF ON MON (ESC) CAM (SET) CLEAR SETUP SHIFT MON LOCK MULTI SCREEN SEL WIPER LOG OUT 3. To save the patrol sequence (SET) button. "LE r" appears on the LED display. w Operate the camera manually. e Press the button 3. The operation data is saved and "LE S"
  • Panasonic WJSX150A | WJSX150A User Guide - Page 109
    the AUTO PAN button while holding down the SHIFT button. F1 ACK RESET CAM SETUP F2 SUSPEND GROUP SEQ ALL RESET TOUR SEQ T&D CAM ID EVENT CALL PRESET The AUTO MODE parameter previously set in the camera's SETUP MENU will be automatically replaced to the activated function parameter. 112
  • Panasonic WJSX150A | WJSX150A User Guide - Page 110
    ON MON (ESC) CAM (SET) SHIFT MON LOCK MULTI SCREEN SEL WIPER ● Auxiliary Control 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the button 3 while holding down the SHIFT button to turn on the user's auxiliary switch 1 of the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 111
    following function is available only if a group sequence has been previously established in WJ-SX150A Administrator Console. As described earlier, a group sequence determines the assignment of monitors and cameras. Therefore, monitor selection is not required. 1. Press the numeric buttons to select
  • Panasonic WJSX150A | WJSX150A User Guide - Page 112
    monitor. * Monitor number, system controller name, tour number and recorder number 115 Clock 08/21/2002 12:50:59 PM M1 K1 T01 C01 camera title ALARM10* Camera title Monitor status Event F2 GROUP SEQ TOUR SEQ T&D CAM ID EVENT INDEX REW/FF PREV NEXT STILL AUX1 OFF AUX1 ON MON STATUS
  • Panasonic WJSX150A | WJSX150A User Guide - Page 113
    Lists the display mode on the monitors. SPOT: Spot mode Tnn: Tour Sequence mode (nn is the tour sequence number.) CAM: Camera Setup mode SET: WJ-SX150A Setup mode ALARM: Alarm Active mode ACK: Alarm ACK mode VLD H: Video Loss History Table ALM H: Alarm History Table SYS S: System
  • Panasonic WJSX150A | WJSX150A User Guide - Page 114
    To exit from the mode, press the CLEAR button. F1 ACK RESET CAM SETUP F2 SUSPEND GROUP SEQ ALL RESET TOUR SEQ T&D CAM ID EVENT CALL PRESET date and time when the video loss state changes. CH: Lists logical camera number, slave unit number or recorder number that is connected to the system.
  • Panasonic WJSX150A | WJSX150A User Guide - Page 115
    alarm inputs with cameras and monitors are changeable in SETUP MENU or WJSX150A Administrator Console. (Refer to pp. 67 and 68/ p. 89.) • Alarm input will be automatically reset in 30 seconds. The auto-recovery time is configurable through SETUP MENU or WJ-SX150A Administrator Console. ■ Operation
  • Panasonic WJSX150A | WJSX150A User Guide - Page 116
    by one. ■ Suspending the Alarm Inputs Use this function when you do not want to be disturbed by an alarm input, for example, during the setup procedures. ACK RESET SUSPEND GROUP SEQ ALL RESET TOUR SEQ T&D CAM REW/FF PREV NEXT STEP PAUSE STILL AUX1 O ALM MON STATUS ALL EL-ZOOM
  • Panasonic WJSX150A | WJSX150A User Guide - Page 117
    board in the matrix switcher and configure the system through SETUP MENU and WJSX150A Administrator Console. [Refer to p. 32 Installing the Multiplexer Board, p. 63 WJ-SX150A SETUP MENU (OSD), and p. 79 WJ-SX150A ADMINISTRATOR CONSOLE.] ■ Monitoring the Camera Picture ● Multiscreen Segment
  • Panasonic WJSX150A | WJSX150A User Guide - Page 118
    mode. 3. Select a camera channel by pressing a numeric button and then pressing the CAM (SET) button. The selected camera image will be displayed in not available while zooming is activated. Note: When a WJ-HD100 Series recorder or a Panasonic time-lapse VCR is connected to the unit, recording
  • Panasonic WJSX150A | WJSX150A User Guide - Page 119
    OPERATING PROCEDURES (PS·DATA) 123
  • Panasonic WJSX150A | WJSX150A User Guide - Page 120
    SYSTEM CONTROLLER This manual describes the operating procedures which are specifically related to WJ-SX150A. For the basic operating procedures such as log-in/log-out, camera selection, and camera control, etc., refer to the system controller's operating instructions. The following are different
  • Panasonic WJSX150A | WJSX150A User Guide - Page 121
    Refer to the system controller's operating instructions before you login the system. After the log-in procedure, the following operations are available to control the system. The operation begins with selecting a monitor, then the selected camera appears the active monitor. ■ Monitor Selection
  • Panasonic WJSX150A | WJSX150A User Guide - Page 122
    through SETUP MENU or WJSX150A Administrator camera (refer to the system controller's operating instructions) to stop the sequence. The monitor will return to the spot mode. ■ Group Sequence The following function is available only if a group sequence has been previously established in WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 123
    (Refer to the table.) 2. Press the FUNCTION button. The function will be executed. Function Code Displaying the clock 104 Displaying the camera title 105 Displaying the event 106 Displaying the monitor status 107 Displaying all the items 19 Displaying System Status 102 Displaying Video
  • Panasonic WJSX150A | WJSX150A User Guide - Page 124
    alarm inputs with cameras and monitors are changeable in SETUP MENU or WJSX150A Administrator Console. (Refer to pp. 67 and 68/ p. 89.) • Alarm input will be automatically reset in 30 seconds. The auto-recovery time is configurable through SETUP MENU or WJ-SX150A Administrator Console. ■ Resetting
  • Panasonic WJSX150A | WJSX150A User Guide - Page 125
    EXPANDED FUNCTION 129
  • Panasonic WJSX150A | WJSX150A User Guide - Page 126
    -HD500 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control Digital Disk Recorder WJHD500 Series. The following is the procedure of WJ-HD500 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 141
  • Panasonic WJSX150A | WJSX150A User Guide - Page 127
    configurable through WJHD500 SETUP. (Refer to the recorder's operating instructions.) 1. Enter the Camera 13, 14, 15 and 16) → 7 (segments) → 9 →10 → 13 → 16 → 4A 3. To return to the spot display, exit from the recorder mode. Note: Multiscreen segment patterns are not configurable through WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 128
    Instructions for details and other recording modes. ● Stopping REC ONLY Alarm Recording 132 You can stop alarm recording activated by "REC ONLY" setting of 430 CAMERA/440 ALARM PORT/450 SERIAL PORT/460 MUX MOTION DET in SETUP MENU (refer to pp. 68 and 69) or the Alarm Mode window in WJ-SX150A
  • Panasonic WJSX150A | WJSX150A User Guide - Page 129
    to the recorder's operating instructions. In addition, the following images can be electrically zoomed besides a camera's optical zooming. 1. Enter the recorder mode PAUSE SEQUENCE DEF OFF DEF ON MON (ESC) CAM (SET) SETUP SHIFT MON LOCK MULTI SCREEN SEL WIPER 6. To return the zooming
  • Panasonic WJSX150A | WJSX150A User Guide - Page 130
    ● Multiscreen Sequence Digital disk recorder starts a sequence according to the setting of WJ-HD500 Series. 1. Enter the recorder mode (Refer to p. 131 Recorder Mode.) 2. Press the button 7 while holding down the SHIFT button. GROUP SEQ TOUR SEQ T&D CAM
  • Panasonic WJSX150A | WJSX150A User Guide - Page 131
    (TERMINAL MODE) Matrix switcher can control Digital Disk Recorder WJHD200 Series. The following is the procedure of WJ-HD200 Series SETUP MENU. Notes: ● Manual Recording The operations are the same as WJ-HD500 Series. (Refer to p. 132.) Note: Refer to WJ-HD200 Series Operating Instructions for
  • Panasonic WJSX150A | WJSX150A User Guide - Page 132
    date and time. The cursor can be adjusted by moving the joystick rightward or leftward. UP ● Multiscreen Sequence The operations are the same as WJ-HD500 Series. (Refer to p. 134.) L R DOWN 4. Press the PLAY button. After the search through the date and time, the recorded image will be played
  • Panasonic WJSX150A | WJSX150A User Guide - Page 133
    the matrix switcher to the digital disk recorder, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and WJ-HD100 Series SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 45 Connection with Digital Disk Recorder WJ-HD100 Series, p. 63 WJ-SX150A SETUP
  • Panasonic WJSX150A | WJSX150A User Guide - Page 134
    3. Press the numeric buttons or NEXT/PREV button to enter the desired date and time. The cursor can be adjusted by moving the joystick rightward or leftward. UP L R DOWN 4. Press the PLAY button. After the search through the date and time, the recorded image will be played. 5. To return to the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 135
    the matrix switcher to the time-lapse VCR, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 46 Connection with the Timelapse VCR (Panasonic Models), p. 63 WJ-SX150A SETUP MENU
  • Panasonic WJSX150A | WJSX150A User Guide - Page 136
    matrix switcher to the digital disk recorder, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 47 Connection with the Time-lapse VCR (Non-Panasonic Models), p. 63 WJ-SX150A SETUP
  • Panasonic WJSX150A | WJSX150A User Guide - Page 137
    WJ-HD500 SERIES CONTROL (PS·DATA) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller's operating instructions the display. 3. To select a camera channel, press the numeric button(s), then CAM button. The
  • Panasonic WJSX150A | WJSX150A User Guide - Page 138
    Recording You can stop alarm recording activated by "REC ONLY" setting of 430 CAMERA/440 ALARM PORT/450 SERIAL PORT/460 MUX MOTION DET in SETUP MENU (refer to pp. 68 and 69) or the Alarm Mode window in WJ-SX150A Administrator Console (refer to p. 88). To stop the alarm recording, press the ALM
  • Panasonic WJSX150A | WJSX150A User Guide - Page 139
    WJ-HD200 SERIES CONTROL (PS·DATA) This section will describe what you should take notice when using a PS·Data system controller. The same descriptions as the system controller's operating instructions the display. 4. To select a camera channel, press the numeric button(s), then CAM button. The
  • Panasonic WJSX150A | WJSX150A User Guide - Page 140
    instructions are not mentioned here. Refer to them. Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and configure the system through WJ-SX150A Administrator Console, OSD SETUP selected camera
  • Panasonic WJSX150A | WJSX150A User Guide - Page 141
    the matrix switcher to the time-lapse VCR, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 46 Connection with the Time-lapse VCR (Panasonic Models), p. 63 WJ-SX150A SETUP MENU
  • Panasonic WJSX150A | WJSX150A User Guide - Page 142
    matrix switcher to the digital disk recorder, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 47 Connection with the Time-lapse VCR (Non-Panasonic Models), p. 63 WJ-SX150A SETUP
  • Panasonic WJSX150A | WJSX150A User Guide - Page 143
    H SYS S PLAY OSD PAUSE SEQUENCE DEF OFF DEF ON MON (ESC) CAM (SET) SHIFT MON LOCK MULTI SCREEN SEL WIPER ■ Camera Switching Pulse Loss Display MUX • When loss of the camera switching pulse is detected, "CAMSW LOSS R1" will blink on the monitor. CAMSW LOSS R1 Note: "R1" is an example of
  • Panasonic WJSX150A | WJSX150A User Guide - Page 144
    TROUBLESHOOTING Check to see the following before request for repair. If a trouble cannot be removed even after checking and trying remedy, contact your dealer. Problem Matrix switcher does not power up. System controller(s) do (does) not log in. Check item The power cord may be disconnected
  • Panasonic WJSX150A | WJSX150A User Guide - Page 145
    lens focus. If the camera supports auto focus, press these buttons display position through the camera's setup menu. (Refer to the camera's operating instructions.) The tour/group SX150A.) When the PROHIBITED indicator is lighting on the system controller, you are prohibited to control the camera
  • Panasonic WJSX150A | WJSX150A User Guide - Page 146
    Problem The alarm mode is not activated. ACK or RESET is not activated. Check item The alarm mode is set to OFF. Remedy Set the alarm mode to SEQUENCE or HOLD in SETUP MENU or WJ-SX150A Administrator Console. SETUP MENU: Refer to p. 67. Administrator Console: Refer to p. 88. The port for an alarm
  • Panasonic WJSX150A | WJSX150A User Guide - Page 147
    APPENDIX 151
  • Panasonic WJSX150A | WJSX150A User Guide - Page 148
    . The unit's communication speed is configurable by changing COM. SPEED in SETUP MENU. Data, parity and stop bits have been set as follows: Item Parameter 8bit(fixed) NONE(fixed) 1bit(fixed) Not supported yet Not supported yet Not supported yet 1. Transmission Command The PC sends messages to the
  • Panasonic WJSX150A | WJSX150A User Guide - Page 149
    OSD display position. mm=Monitor No. ss=AL ss=TM ss=TL ss=TE ss=TO All OSD items ON/OFF Time & date ON/OFF Camera title ON/OFF Event ON/OFF Monitor status ON/OFF o=U Moving upward o=D Moving downward o=L Moving leftward o=R Moving rightward n=0 Displayed n=1 Not displayed mm=Monitor No. ss
  • Panasonic WJSX150A | WJSX150A User Guide - Page 150
    - one by one Reset all motion-detection CMD:AmmCV - areas of a camera channel 154 Parameter (ASCII) cc=Alarm No. mm=Monitor No. mm=Monitor No OFF n=1 ON Parameter (ASCII) mm=Monitor No. mm=Monitor No. *Available only in SETUP MENU mm=Monitor No. mm=Monitor No. mm=Monitor No. mm=Monitor No. mm
  • Panasonic WJSX150A | WJSX150A User Guide - Page 151
    PAN/TILT Transmission Command (ASCII) CMD:CmmPTccxxyy Response (ASCII) - Zoom Focus Iris CMD:CmmZMccn - CMD:CmmFCccn - CMD:CmmIRccn - Parameter (ASCII) mm=Monitor No. cc=Camera No. • Panning speed xx=00 STOP xx=01 to 40(HEX) + direction panning (Max is 40 and min is 01) xx=81 to C0(HEX
  • Panasonic WJSX150A | WJSX150A User Guide - Page 152
    AUX1 AUX2 156 CMD:CmmWPccn - CMD:CmmDFccn - CMD:CmmA1ccn - CMD:CmmA2ccn - Parameter (ASCII) mm=Monitor No. cc=Camera No. n=0 OFF n=1 ON The following commands are available in SETUP MENU: CMD:AmmJL (Move the cursor leftward) CMD:AmmJR (Move the cursor rightward) CMD:AmmJU (Move the cursor
  • Panasonic WJSX150A | WJSX150A User Guide - Page 153
    fold zoom n=4 x4Live image/Playback image n=8 x8Live image/Playback image *Available only with the Multiplexer board Necessary when using a non-Panasonic recorder with the Multiplexer board. Transmission command changes the monitor display between live and playback image. n=0 Live image n=1 Playback
  • Panasonic WJSX150A | WJSX150A User Guide - Page 154
    still display ON or OFF. mm=Monitor No. cc=Camera No. (cc=00 when toggling multiscreen still ON or display between index and live image. Setup control commands (refer to p. 154) are only for Record List and Thumbnail Display of WJ-HD500 Series Transmission command toggles search editing
  • Panasonic WJSX150A | WJSX150A User Guide - Page 155
    qid:WJ-SX150A qrv QAD qad:nnn:YYYYMMDD hhmmss:cc:ee:s QVD qvd:nnn: YYYYMMDD hhmmss:cc:ee:s Parameter (ASCII) Matrix switcher's MM=Month DD=Day hh=Hour mm= Month ss=Second cc=Alarm number (associated with the camera number: 00 when the alarm is suspended) ee= Event 00=ALARM 01=ACK 02=RESET
  • Panasonic WJSX150A | WJSX150A User Guide - Page 156
    Miscellaneous Control Transmission Command Item (ASCII) Alarm display - Response (ASCII) Parameter (ASCII) ALM:cc:a:yyyymmdd:hhmm a=Event ss:b 0=ALARM 1=ACK 2=RESET yyyy=Year mm=Month dd=Day hh=Hour ss=Second b=Daylight saving time 0=OFF 1=ON 160
  • Panasonic WJSX150A | WJSX150A User Guide - Page 157
    List ● Matrix switcher and external mode caused the command error. The parameter's number, digit and range are valid, but the operation mode is be executed. (1) The unit receives the zoom command while selecting a camera without electronic zoom function. Transmission Command (ASCII) [STX] CMD:R01ZM
  • Panasonic WJSX150A | WJSX150A User Guide - Page 158
    for new entry or troubleshooting. Regardless of the system size, the worksheets can track past, current, and future configurations. ■ Instruction Each worksheet's title is the same as that of WJ-SX150A Administrator Console. For example, the "Operator Registration" worksheet supports the "Operator
  • Panasonic WJSX150A | WJSX150A User Guide - Page 159
    2 Slave 3 Slave 4 ON ON/OFF ON/OFF ON/OFF ON/OFF Date completed ● Logical Camera Number Normal connection (one unit only) Camera 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LCN Master, Slave 1 and Slave 2 163 Camera 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Slave 1 LCN Slave 2 Master and Slave
  • Panasonic WJSX150A | WJSX150A User Guide - Page 160
    Master and Slave 1 to 3 Camera 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Slave 1 Master and Slave 1 to 4 Camera 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Slave 1 LCN Slave 2 Slave 3 Slave 2 LCN Slave 3 Master Slave 4 164
  • Panasonic WJSX150A | WJSX150A User Guide - Page 161
    ● Tour Sequence Step 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LCN Preset position Dwell time Tour __ / 32 Remark 165
  • Panasonic WJSX150A | WJSX150A User Guide - Page 162
    time ● Group Sequence Tour __ / 32 Remark Group 1 2 3 4 Monitor 1 Monitor 2 Monitor 3 Monitor 4 ● Timer Event Schdule Mode Daily Weekly Action 166 Monthly Tour Sequence Spot Camera Every Hour Every Sunday Monday Tuesday Wednesday Thursday Friday Saturday Every Day# Monitor# Logical
  • Panasonic WJSX150A | WJSX150A User Guide - Page 163
    Alarm Mode Alarm Mode Dwell OFF Sequence Mode sec. Hold Mode Auto Reset Time sec. ● Sensitivity Camera 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LCN OFF/LOW/MID/HIGH OFF/LOW/MID/HIGH OFF/LOW/MID/HIGH 167 Alarm Input Camera Site Alarm Alarm Port Serial Port Mux Motion Det OFF / ON / REC
  • Panasonic WJSX150A | WJSX150A User Guide - Page 164
    ● Alarm Event ALM# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Alam Event Monitor# LCN/Tour Num Pre Alam Port Master/Slave Num 168
  • Panasonic WJSX150A | WJSX150A User Guide - Page 165
    ALM# 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 Alam Event Monitor# LCN/Tour Num Pre Alam Port Master/Slave Num 169
  • Panasonic WJSX150A | WJSX150A User Guide - Page 166
    ALM# 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 Alam Event Monitor# LCN/Tour Num Pre ● Alarm Port Alarm # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Alarm Port N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time N.O./N.C./Time
  • Panasonic WJSX150A | WJSX150A User Guide - Page 167
    Access 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Camera Access 1: View & Control 2: View Only 3: Prohibited ● Level Table Control SX150A Setup Camera Setup Program Preset Position Camera Control Camera Selection Recorder Setup Recorder Control All Alarm Reset Single Alarm Reset Alarm Suspend Call
  • Panasonic WJSX150A | WJSX150A User Guide - Page 168
    ON / OFF ON / OFF ON / OFF ON / OFF ON / OFF ON / OFF ON / OFF ● Camera Title Cam 1 Cam 2 Cam 3 Cam 4 Cam 5 Cam 6 Cam 7 Cam 8 Cam 9 Cam 10 Cam 11 Cam 12 Cam 13 Cam 14 Cam 15 Cam 16 Camera ID (Up to 20 characters) Minute(s) DATA ON / OFF ON / OFF ON / OFF ON / OFF
  • Panasonic WJSX150A | WJSX150A User Guide - Page 169
    ● Data Port RS485 Port RS485 DATA 1 DATA 2 DATA 3 DATA 4 Protocol Camera Camera/Terminal_K1/K2/K3/K4 Camera/Terminal_K1/K2/K3/K4 Camera/Terminal_K1/K2/K3/K4 PS·Data/Terminal_K1/K2/K3/K4 Baud Rate bps bps bps bps bps RS485 Camera Daisy 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PS•Data mode (for
  • Panasonic WJSX150A | WJSX150A User Guide - Page 170
    2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 Group 10 Group 11 Group 12 Group 13 Group 14 Group 15 Group 16 Cam Cam Cam System Camera SW Loss Dummy Black Multiplexer Title Cam1 Cam2 Cam3 Cam4 Cam5 Cam6 Cam7 Cam8 Cam9 Cam10 Cam11 Cam12 Cam13 Cam14 Cam15 Cam16 174
  • Panasonic WJSX150A | WJSX150A User Guide - Page 171
    (1 to 16): Monitor Output (1 to 4): External Input (PLAY IN): External Output (REC OUT): RS-485 (Camera) Port: Data Port: Alarm Port: Serial Port: Camera Switching Input: Ambient Operating Temperature: Ambient Operating Humidity: Dimensions: Weight: 120 V AC, 60 Hz 60 W 1.0 V[p-p]/75 Ω composite
  • Panasonic WJSX150A | WJSX150A User Guide - Page 172
    Panasonic Digital Communications & Security Company Unit of Matsushita Electric Corporation of America Security Systems Group www.panasonic.com/cctv Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Zone Office Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Central:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.
WJ-SX150A
Matrix Switcher
Operating Instructions
Matrix Switcher WJ-SX
150
A
OPERATE
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS