Panasonic WVNP472 WVNP472 User Guide
Panasonic WVNP472 - COLOR CCTV CAMERA Manual
View all Panasonic WVNP472 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WVNP472 manual content summary:
- Panasonic WVNP472 | WVNP472 User Guide - Page 1
Color CCTV Camera Operating Instructions Model No. WV-NP472 (Lens: Option) day/night SDII (Lens : option) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Panasonic WVNP472 | WVNP472 User Guide - Page 2
OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SA 1965 SA i.e., in strict accordance with the instruction manual, may cause harmful interference to radio event of theft. Model No. Serial No. WV-NP472 WARNING: To prevent fire or electric shock hazard, - Panasonic WVNP472 | WVNP472 User Guide - Page 3
not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in - Panasonic WVNP472 | WVNP472 User Guide - Page 4
23 ■ Network Setup of the PC 24 ■ Network Setup of the Camera 25 ■ Network Setup Parameters vs. Connection Type 26 CAMERA SETUP FROM THE PC 30 ■ Camera Setup Menus ■ Auxiliary Output Control 43 TROUBLESHOOTING 44 SPECIFICATIONS 45 OPTIONAL ACCESSORIES 46 STANDARD ACCESSORIES 46 - Panasonic WVNP472 | WVNP472 User Guide - Page 5
PREFACE Panasonic's WV-NP472 camera features functions for network access besides high-level picture quality developed for conventional video surveillance purposes. Features • 10/100BASE-T terminal enables your PC to view camera images via the network. • SD II (super dynamic) system allows a wide - Panasonic WVNP472 | WVNP472 User Guide - Page 6
electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask qualified service personnel for servicing. 3. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 4. Do not use - Panasonic WVNP472 | WVNP472 User Guide - Page 7
w e !1 !2 !3 WV -NP472 !0 ALARM IN ALARM OUT AUX picture focus. e Lens (Option) r Camera Mounting Adapter Mounts the camera onto a mounting bracket. t Down Button button A, along with the J and K buttons, resets the network setup parameters when you hold down these buttons for 6 seconds in - Panasonic WVNP472 | WVNP472 User Guide - Page 8
CS-mount: Less than 8 mm (5/16") • Secure both the lens and camera with the supporter (not supplied) if a lens heavier than 450 g (0.99 lbs) is mounted ring down until it stops on the side of the camera. Lens Mount C-mount Adapter WV-NP472 Flange-back Adjusting Ring & Screw 3. Mount the lens. - Panasonic WVNP472 | WVNP472 User Guide - Page 9
mounting adapter from the bottom of the camera. 2. Attach the mounting adapter on top of the camera as shown in the figure. Fixing Screws Mounting Adapter WV-NP472 3. Secure the camera to the camera-mounting bracket (locally procured), referring to the manual included with the bracket. Note: Use the - Panasonic WVNP472 | WVNP472 User Guide - Page 10
are connected. • Use a router handling PPPoE (PPP over Ethernet) when running PPPoE to connect with the Internet, because the camera is incapable of it. • Use network cables complying with category5. • Direct Connection to PC (Type 1) ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO - Panasonic WVNP472 | WVNP472 User Guide - Page 11
NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Straight type) Switching Hub PC (16 clients maximum) Note: Apply proper measures to protect the camera from thunderbolts if your system is possibly damaged. As a protection, for example, use a converter - Panasonic WVNP472 | WVNP472 User Guide - Page 12
10BASE-T/ 100BASE-TX LINK Network Cable (Cross type) 1. Enter an IP address, "http://192.168.0.10" for example, in the address bar of the browser to display the main page of the WV-NP472 camera. Note: Adobe Acrobat Reader should have been installed on your PC to open the manual. Visit the home - Panasonic WVNP472 | WVNP472 User Guide - Page 13
while observing the monitor. Note: See the manuals included with the system devices for operating the camera from them • Function Comparison / PC Network vs. Camera site Function VIEWING IMAGES Zoom (with Panasonic's motorized lens) Focus Iris (with Panasonic's ALC lens) Switching Color/BW Mode - Panasonic WVNP472 | WVNP472 User Guide - Page 14
to the factory default. Pressing RIGHT and LEFT, or clicking RESET: Resets the selected settings to the factory default. Camera Setup Menus ¡From the PC 1. Open the main page of the WV-NP472 camera, referring to page 12. Login as a level-1 administrator in the dialog box if requested. 2. Click - Panasonic WVNP472 | WVNP472 User Guide - Page 15
. 5. Move the cursor to END, and press the I button after finishing the setup. The changed settings will be stored in the camera, and the overlaid camera menu will disappear. ** SET UP ** CAMERA ↵ ↵ NETWORK END SET UP DISABLE Left Button Set Button Up Button Right Button Down Button -15- - Panasonic WVNP472 | WVNP472 User Guide - Page 16
camera. For accessing from the PC, interpret these instructions as follows. Function Opening the camera setup menu Closing the camera setup menu From the Camera SELECTION ** SET UP ** CAMERA ↵ ↵ NETWORK END SET UP DISABLE CAMERA SETUP MENU ** CAM SET UP ** ↵↵ CAMERA ID OFF ALC/ELC ALC - Panasonic WVNP472 | WVNP472 User Guide - Page 17
in the editing area. Highlighted WV-NP472 To replace a specific character in the CAMERA ID 1. Move the cursor CAMERA ID. 2. Light Control Setting (ALC/ELC) You can select the mode for adjusting the lens iris. ALC: If you use a auto iris lens, select this parameter. ELC: If you use a fixed or manual - Panasonic WVNP472 | WVNP472 User Guide - Page 18
-D2, a shadow (black line) may appear at the boundary between the bright and the dim scenes. This is a natural phenomenon and does not indicate any trouble. 3. Shutter Speed Setting (SHUTTER) Note: When ELC is selected for ALC/ELC on the CAM SET UP menu or ON is selected for SUPER-D2 - Panasonic WVNP472 | WVNP472 User Guide - Page 19
temperature range of approximately 2 300-10 000 K. ** CAM SET UP ** CAMERA ID OFF ALC/ELC ALC SHUTTER --- AGC ON(DNR-H) SENS UP OFF SYNC set, PUSH SW is being highlighted. 4. When you want to adjust white balance manually, press M to select AWC and press I. The AWC menu appears on the - Panasonic WVNP472 | WVNP472 User Guide - Page 20
can set the white balance items manually. 1. To set MASK SET, alarm for DISPLAY MODE. Note: When using the WV-RM70, WV-CU550 series, WV-CU161 or WV-CU360 controller with this model, select OFF for setting. Notes: • When the camera is not used in a Panasonic Intelligent CCTV System, select OFF. - Panasonic WVNP472 | WVNP472 User Guide - Page 21
. The SPECIAL menu appears on the monitor screen. ** CAM SET UP ** ↵↵ CAMERA ID OFF ALC/ELC ALC SHUTTER --- AGC ON(DNR-H) SENS UP OFF SYNC INT Select AUTO1, AUTO2, EXT, ON or OFF using L or M. AUTO1: The camera selects the black and white mode if the picture is dark, or the color mode - Panasonic WVNP472 | WVNP472 User Guide - Page 22
or more. The camera is reset to the factory settings. NETWORK SETUP Set up network parameters when connecting the 10/100BASE jack with a network. Notes: • and press I. Parameters become editable. 3. Select a digit using J or K. 4. Select a number in the digit using L or M. 5. Repeat steps 2, 3 and - Panasonic WVNP472 | WVNP472 User Guide - Page 23
-type network cable (Category 5) • CATV modem (cable modem) or DSL modem • Switching hub or router (10BASE-T/100BASETX applicable) Notes: • Setting the router is required when connecting more than one camera. Refer to the manual included with the router. • The camera does not support the PPPoE - Panasonic WVNP472 | WVNP472 User Guide - Page 24
settings of the PC to match them to the default settings of the camera. The following are the default network settings of the camera. IP address Subnet mask Default gateway : 192.168.0.10 : 255.255.255.0 : 192.168.0.1 To access the camera, the IP address of the PC should be "192.168.0.XXX" (where - Panasonic WVNP472 | WVNP472 User Guide - Page 25
connected, it is required to set up each camera individually. The following information is necessary for the network setup of the camera. If you do not have the following information, refer to your network administrator or your Internet service provider. • IP address • Subnet mask • Default gateway - Panasonic WVNP472 | WVNP472 User Guide - Page 26
the same IP addresses already assigned to the PC and any other cameras). Use the default setting "255.255.255.0" for the subnet mask. No setting required Set the network speed. Use the default setting "auto" for the network speed. Selectable parameters: auto (default setting), 100 Mbps (full duplex - Panasonic WVNP472 | WVNP472 User Guide - Page 27
a DHCP server (the DHCP server assigns an IP address to the camera automatically). Set the default gateway designated by your Internet service provider. Set the network speed. Use the default setting "auto" for the network speed. Selectable parameters: auto (default setting), 100 Mbps (full duplex - Panasonic WVNP472 | WVNP472 User Guide - Page 28
service provider uses a DHCP server (the DHCP server assigns an IP address to the camera automatically) after confirming that your internet Internet service to the operating instructions of the router. Set the network speed. Use the default setting "auto" for the network speed. Selectable parameters - Panasonic WVNP472 | WVNP472 User Guide - Page 29
ON when using the DNS server. No setting required Set the IP address of DNS when using the DNS server. Refer to your internet Internet service provider for the IP address of the DNS. Primary and secondary IP addresses can be set for the DNS. Set to ON if the router - Panasonic WVNP472 | WVNP472 User Guide - Page 30
. Refer to PRIOR TO SETUP on page 14 for common setup operations from the camera and the PC. qw io i Reset button (RESET/SPECIAL) • Resets the RESET) Resets all the settings to the factory default when the cursor is at CAMERA RESET in the SPECIAL menu. e rt y u q Return button Returns to the - Panasonic WVNP472 | WVNP472 User Guide - Page 31
■ Camera Setup Menus Menu windows are shown in this page. Refer to page 16 for menu operations. -31- - Panasonic WVNP472 | WVNP472 User Guide - Page 32
. Click any of the setup selection buttons on top of the screen to open the desired window. The following are opened from the Network Setup window. Image Setup Alarm Setup FTP Client Setup User Authentication Setup Host Authentication Setup System (Date & LED) Setup ■ Alarm Setup ■ Image Setup - Panasonic WVNP472 | WVNP472 User Guide - Page 33
and after the alarm input in the memories of the camera. • Set the image frame numbers for the pre 2, 3.3, 5, 10 • Click the SET&REBOOT button. 5. Panasonic Protocol Setup • Select ON or OFF. ON: Sends alarm Latch: Holds active status until it is reset manually. • Enter pulse width (n x 100 milli- - Panasonic WVNP472 | WVNP472 User Guide - Page 34
transmission interval. Available time (seconds): 0.2 - 0.9, 1 - 1 440 Available time (minutes): 1 - 1 440 Notes: • Transmission interval may be delayed depending on the network speed and/or traffic conditions. • The alarm image precedes the non-alarm image in transmission to the FTP server. The non - Panasonic WVNP472 | WVNP472 User Guide - Page 35
users will become level 2 if both the host and the user authentications are set to OFF. • A host unregistered will be unable to access the camera. • Never turn over the order: start with the host registration, and then proceed to the authentication ON/OFF. 1. Open the System Setup window. 2. Time - Panasonic WVNP472 | WVNP472 User Guide - Page 36
the following data back to the factory default settings. Camera Setup Setup Menu (PC oriented) HTML files ■ Initializing the Camera Menu • Move the cursor to CAMERA RESET. • Hold down simultaneously L and M buttons for 2 seconds on the camera, or click the All Reset button on your computer display - Panasonic WVNP472 | WVNP472 User Guide - Page 37
VIEWING PICTURES ■ Image Quality Selection 1. Click the Setup Menu button in the main page. The Network Setup window opens. ■ Still Picture Storage to the PC The camera picture can be saved as a still image in your PC. 1. Move the cursor to the picture area in the screen, and right-click to select - Panasonic WVNP472 | WVNP472 User Guide - Page 38
help picture become clear under conditions of insufficient lighting. 1. In the main page, click the Camera Menu button. Notes: • Switching to black-and-white will be disabled e in the following cases. 1. The camera setup menu is displayed. (Click Menu OFF.) 2. EXT is set for B/W in the special menu - Panasonic WVNP472 | WVNP472 User Guide - Page 39
camera becomes active. • The notice of an alarm activation is sent to the server specified in Panasonic Protocol Setup, using the Panasonic's four addresses, with or without attached picture file. A mail contains: the camera name, time & date of occurrence, cause of event, and the reference - Panasonic WVNP472 | WVNP472 User Guide - Page 40
with the right or left button, and click ENTER. The ** MOTION DETECT ** appears. 2. Click the Menu ON button. ** SET UP ** will be overlaid on the camera picture. 5. Move the cursor to MASK SETO, and click the ENTER. Detection map is split into 48 areas with status indications for each. -40- - Panasonic WVNP472 | WVNP472 User Guide - Page 41
, and click ENTER. The demonstration starts, and the areas will blink where motion is detected. Blinking ■ Reviewing Alarm Pictures The alarm pictures stored in the camera can be reviewed on the PC. 1. In the main page, click the Alarm List button. 2. Click the desired event in the list. The events - Panasonic WVNP472 | WVNP472 User Guide - Page 42
to a newly arisen event that replaces the picture data. • You may need to re-enter the camera address into the address bar of the browser when the buttons do not work properly. • Re-enter the camera address into the address bar and start again from step 1, when the selected picture does not - Panasonic WVNP472 | WVNP472 User Guide - Page 43
■ Auxiliary Output Control You can turn on or off the connected device, for example a lamp that is connected to the AUX OUT terminal of the camera. 1. Open the auxiliary output control window clicking the AUX Output Control button in the main page. 2. Select the polarity to switch on or off the - Panasonic WVNP472 | WVNP472 User Guide - Page 44
TROUBLESHOOTING Symptom No picture is displayed. What to do • Is the AC adapter firmly plugged in to the outlet? • Are the POWER IN terminals on the camera connected with the AC adapter properly? • Is the lens cap removed? • Is the video cable or network cable connected properly? Reference page - Panasonic WVNP472 | WVNP472 User Guide - Page 45
Source and Power Consumption: Dimensions (without lens): Weight (without lens): Network Section Image Resolution: Image Process: Image Refreshing Rate: Traffic Control: Protocol Supported: OS Applicable: Browser Applicable: Camera Section Pick-up Device: Scanning Area: Scanning: Horizontal: Vertical - Panasonic WVNP472 | WVNP472 User Guide - Page 46
pc. ALC Lens Connector (YFE4191J100 1 pc. CD-ROM (PDF Manual Contained 1 pc. C-mount Adapter 1 pc. OPTIONAL ACCESSORIES Lenses : WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3 WV-LA908C3, WV-LZ61/10, WVLZ61/15, WV-LZA61/2, WV-LZ62/2, WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A, WV-LZF61/2 -46- - Panasonic WVNP472 | WVNP472 User Guide - Page 47
Panasonic Digital Communications & Security Company Unit Company of Matsushita Electric Corporation of America Security Systems www.panasonic.com/cctv Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Zone Office Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303
(Lens : option)
SDII
day/night
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.
WV-NP472
Color CCTV Camera
Operating Instructions
(Lens: Option)