Pentax 18506 Operation Manual

Pentax 18506 - Optio S60 Digital Camera Manual

Get Pentax 18506 - Optio S60 Digital Camera PDF manuals and user guides
UPC - 027075114531
View all Pentax 18506 manuals
Add to My Manuals
Save this manual to your list of manuals

Pentax 18506 manual content summary:

  • Pentax 18506 | Operation Manual - Page 1
    Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera.
  • Pentax 18506 | Operation Manual - Page 2
    , Optio and smc PENTAX are trademarks of PENTAX Corporation. • The SD logo is a trademark. • All other brands or product names are trademarks or registered trademarks of their respective owners. This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras
  • Pentax 18506 | Operation Manual - Page 3
    or electric shocks. • If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the camera immediately, remove the battery or disconnect the AC adapter and contact your nearest PENTAX service center. Continued use of the camera may result in fire or electric
  • Pentax 18506 | Operation Manual - Page 4
    battery could explode or catch fire. The batteries that can be used in this camera, only the Ni-MH battery can be recharged. • Do not place your in your eyes or in your mouth. Handling precautions for batteries • This camera uses two AA alkaline, AA lithium, AA Ni-MH, AA nickel manganese batteries
  • Pentax 18506 | Operation Manual - Page 5
    to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a PENTAX Service Center. • Do not short or touch the output terminals of the product while it is still plugged in. • Do not plug in the AC plug
  • Pentax 18506 | Operation Manual - Page 6
    • Take the international warranty card with you when you travel abroad. Also take the Worldwide Service Network that is included in the package. This will be useful if you experience problems abroad. • When the camera has not been used for a long time, confirm that it is still working properly
  • Pentax 18506 | Operation Manual - Page 7
    Regarding Product Registration In order to better service you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or the PENTAX website. Thank you for your cooperation. Refer to the PC Connection Manual (bottom right of reverse side) for
  • Pentax 18506 | Operation Manual - Page 8
    be Taken During Handling 4 Contents 6 Contents of the Operating Manual 11 Checking the Contents of the Package 12 Names of Parts 13 Names of Operating Parts 14 Getting Started 15 Attaching the Strap 15 Powering the Camera 16 Installing the Batteries 16 Using a Household Power Outlet 18
  • Pentax 18506 | Operation Manual - Page 9
    Pictures in Auto Select Mode (Auto Select Mode 49 Letting the camera set the functions (Program Mode 52 Selecting the Picture Mode According to Using the Remote Control Unit (optional 63 Taking Pictures with Color Filters (Digital Filter Mode 64 Taking Two-in-One Pictures (Two-in-One Mode
  • Pentax 18506 | Operation Manual - Page 10
    Printing Service (DPOF 105 Printing Single Images 105 Printing All Images 107 Direct Printing Using PictBridge 108 Connecting the Camera to the Size and Quality 112 Editing Pictures with Digital Filters 114 Copying Files 116 Settings 118 Camera Settings 118 Formatting an SD Memory Card
  • Pentax 18506 | Operation Manual - Page 11
    Appendix 132 List of City Codes 132 Optional Accessories 133 Messages 134 Troubleshooting 136 Main Specifications 138 Index 141 WARRANTY POLICY 146 9
  • Pentax 18506 | Operation Manual - Page 12
    Memo 10
  • Pentax 18506 | Operation Manual - Page 13
    Contents of the Operating Manual This operating manual contains the following chapters. 1 Getting Started 1 This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions. 2 Quick Start This chapter
  • Pentax 18506 | Operation Manual - Page 14
    Checking the Contents of the Package Camera Optio S60 Strap O-ST20 (∗) Software (CD-ROM) S-SW32 AV cable I-AVC7 (∗) USB cable I-USB7 (∗) Two AA alkaline batteries Operating Manual (this manual) PC Connection Manual ACDSee for PENTAX User Guide Items marked with an asterisk (∗) are also
  • Pentax 18506 | Operation Manual - Page 15
    Names of Parts Front Back Shutter release button Remote control receiver Self-timer lamp Power switch Flash Speaker Microphone Lens Terminal cover PC/AV terminal DC input terminal Flash status lamp (red) Focus status lamp (green) Mode dial Card cover release lever Strap lug Card cover Battery cover
  • Pentax 18506 | Operation Manual - Page 16
    Indications A guide to available button operations appears on the LCD monitor during operation. The buttons are indicated as shown below. Four-way controller (2) Four-way controller (3) Four-way controller (4) Four-way controller (5) MENU button 2 Zoom /f/y button 3 When digital zoom is enabled
  • Pentax 18506 | Operation Manual - Page 17
    Getting Started Getting Started Attaching the Strap 1 Pass the narrow end of the strap through the strap lug and pass the other end through the loop. 15
  • Pentax 18506 | Operation Manual - Page 18
    remove the batteries, otherwise the batteries may leak. • The "Battery depleted" error message may appear when you turn on the power after purchasing the camera or after replacing the batteries if the batteries had been removed for a long time. However, this is not an error. Wait a short period and
  • Pentax 18506 | Operation Manual - Page 19
    use, 23°C.) *2 The playback times are a guideline based on PENTAX measuring conditions and may vary depending on the actual shooting conditions of use battery performance temporarily deteriorates as the temperature decreases. When using the camera in a cold environment, keep it warm by putting it in
  • Pentax 18506 | Operation Manual - Page 20
    disconnected while you are taking pictures. • If the terminal cover on the camera gets caught in the grooves of the DC terminal (indicated by ∗ in the "FOR SAFE USE OF YOUR CAMERA" (p.1). • Be sure to read the operation manual accompanying the AC adapter D-AC5 before using the adapter. • The
  • Pentax 18506 | Operation Manual - Page 21
    Getting Started Using the AC Adapter Overseas AC adapter D-AC5 (optional) is designed to switch automatically to the voltage (100-240V) and frequency (50Hz, 60Hz) of the electricity supply in the country or region where used. 1 However, electrical socket shapes differ depending on the country
  • Pentax 18506 | Operation Manual - Page 22
    Getting Started Main Socket Types in the Major Countries and Regions of the World 1 North America U.S.A., Canada A B BF C S 9 Europe, Iceland, Ireland, Italy, Ukraine, Austria, Former Soviet Netherlands, Kazakhstan, Greece, Sweden, Union Denmark, Germany, Norway, Hungary, Finland, 9 France
  • Pentax 18506 | Operation Manual - Page 23
    recorded on the builtin memory (@ appears on the LCD monitor). Make sure that the camera is turned off before inserting or removing the SD Memory Card. 1 Press down on used on another camera. Refer to "Formatting an SD Memory Card or the Built-in Memory" (p.118) for instructions on formatting. 21
  • Pentax 18506 | Operation Manual - Page 24
    in 1 memory. Getting Started Precautions When Using an SD Memory Card • Make sure that the camera is turned off before opening or closing the card cover. • The SD Memory Card is on compatible memory cards, visit the PENTAX website or contact your nearest PENTAX customer service center. 22
  • Pentax 18506 | Operation Manual - Page 25
    Getting Started Recorded Pixels and Quality Choose the number of recorded pixels and quality best suited to your purpose. Higher quality levels and numbers of recorded pixels produce clearer 1 images for printing, but the resulting increase in data volume reduces the total number of pictures that
  • Pentax 18506 | Operation Manual - Page 26
    ×240) Sound 9 min. 12 sec. (15 fps) 4 min. 45 sec. (30 fps) 2 h. 13 min. • The above table is based on standard shooting conditions specified by PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc. 24
  • Pentax 18506 | Operation Manual - Page 27
    Playback Mode 1p.46 Taking Pictures 1p.46 Checking the SD Memory Card The SD Memory Card is checked automatically Memory status indicator when the camera is turned on. ? appears on the LCD monitor when a card has been inserted and 4 images and sound are recorded on the card. Y appears instead
  • Pentax 18506 | Operation Manual - Page 28
    mode does not switch to Capture mode even if the shutter release button is pressed. 1 Press the power switch while pressing the Q Playback button. The camera turns on in the Playback Only mode. The lens does not extend. • To switch from Playback Only mode to Capture mode, press the power switch
  • Pentax 18506 | Operation Manual - Page 29
    mode is for recording sound only. The lens does not extend in this mode. You can use the camera as a voice recorder. 1 1 Set the mode dial to O and press the power switch. The camera turns on in Voice Recording Only mode. The lens does not extend. When the mode dial is turned
  • Pentax 18506 | Operation Manual - Page 30
    set the 1 language, date and time. Power switch Getting Started Four-way controller OK button MENU button If the Initial Setting screen appears when the camera is turned on, follow the procedure below; "Setting the Display Language" to set the language and page 30; "Setting the Date and Time" to
  • Pentax 18506 | Operation Manual - Page 31
    you usually stay) is set to the city that corresponds to the language mistakenly set previously. Set the W to your desired city referring to the instructions of the "Setting the World Time" (p.122). 29
  • Pentax 18506 | Operation Manual - Page 32
    step 3, the setting switches between AM and PM corresponding to the time. Press the OK button. The camera is ready to take pictures. • When you finish the settings and press the OK button, the camera clock is reset to 00 seconds. • To set the exact time, press the OK button when the
  • Pentax 18506 | Operation Manual - Page 33
    Setting or Date Adjust screen 1 will appear next time you turn the camera on. • [Video Output Format] is automatically set corresponding to the display of your region is different, reset the setting following the instruction "Changing the Video Output Format" (p.127). Language Japanese
  • Pentax 18506 | Operation Manual - Page 34
    The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions. 1 Press the power switch. 4 The camera turns on. 2 Set the mode dial to R. 3 Check the image on the LCD monitor. The focus frame in the middle of the LCD 09
  • Pentax 18506 | Operation Manual - Page 35
    way down (fully) to take a picture. [Poor focusing conditions] The camera may not be able to focus under the following conditions. In this the subject (by pressing the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully. • Objects that
  • Pentax 18506 | Operation Manual - Page 36
    Quick Start Playing Back Still Pictures i Delete button 2 Q Playback button LCD monitor Quick Start Four-way controller Playing Back Images You can display the still picture you have just taken. 1 Press the Q Playback button after taking a picture. 100-0004 The mode changes to the Playback
  • Pentax 18506 | Operation Manual - Page 37
    The image is rotated 90° clockwise each time the button is pressed. 100-0004 2 09/10/2005 10:25 • Only still images taken with this camera can be rotated. • Zoom display, nine-image display and voice memo recording/playing function can be used with rotated images. However, images rotated in zoom
  • Pentax 18506 | Operation Manual - Page 38
    .70) (5) Changes the focus mode. (1p.68) (2) Selects self-timer mode, remote control mode and continuous shooting mode (1p.61 - p.63) [When using PICT, digital filter mode] (3) Selects the shooting effect. (1p.53, 64 - 66) [When using MF mode] (23) Adjusts the focus. (1p.69) 6 OK button Sets a menu
  • Pentax 18506 | Operation Manual - Page 39
    the [A Rec. Mode], [Q Playback] and [B Set-up] menus. (1p.39) Pressing the Q Playback button does not change the mode to the Capture mode when the camera was turned on in Playback Only mode. To switch from Playback Only mode to Capture mode, press the power switch to turn the
  • Pentax 18506 | Operation Manual - Page 40
    Common Operations 5 1 2 3 4 3 Voice Recording Mode 1 Shutter release button When pressed, starts recording, and when pressed again, stops recording. (1p.86) 2 Q Playback button Switches to the Playback mode. When pressed again, returns to Voice Recording mode. (1p.87) 3 Four-way controller (in
  • Pentax 18506 | Operation Manual - Page 41
    menus appear on the LCD monitor. You can set functions, save the settings and change the camera settings on these menus. How to Use the Menus Common Operations When you are making settings from a menu, a guide to operation appears on the LCD monitor. Ex.) To set the [Quality Level] on the [A Rec
  • Pentax 18506 | Operation Manual - Page 42
    Common Operations Example of Menu Operation [A Rec. Mode] Menu MENU Rec. Mode Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity MENU E x i t 2816 AWB Multi Auto OK OK 3 MENU button Rec. Mode Recorded Pixels Quality Level White Balance Focusing Area AE Metering
  • Pentax 18506 | Operation Manual - Page 43
    Sound Date Adjust World Time Screen Setting On mm/dd/yy Off English MENU E x i t OK OK 3 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Set-up Format Sound Date Adjust World Time Screen Setting On mm/dd/yy Off English MENU E x i t OK OK
  • Pentax 18506 | Operation Manual - Page 44
    Focusing Area AE Metering Sensitivity MENU E x i t 2816 AWB Multi Auto OK OK x w Rec. Mode Focusing Area MENU E x i t Multi OK OK If you turn the camera off while still in enlarged display mode, the next time you turn the camera on and press the MENU button, the menu will be enlarged. 42
  • Pentax 18506 | Operation Manual - Page 45
    Instant Review time 0.5 sec - Yes No p.79 Memory For selecting whether or Save flash, not to save the shooting digital zoom - function settings when and file Yes the camera is turned off number only Yes p.84 For setting whether the Sharpness image has sharp or soft Normal - # outlines
  • Pentax 18506 | Operation Manual - Page 46
    For protecting images from deletion DPOF For setting the printing service to print out images Slideshow For playing back recorded images successively from the built-in memory to the SD Memory Card and vice versa Digital Filter For creating a filter effect using filters (red, blue, green,
  • Pentax 18506 | Operation Manual - Page 47
    -up sound, shutter sound, key operation p.119 sound. Date Adjust For adjusting the date, time and date style p.120 World Time For setting the camera to display a date and time for a country or region that is different from the default settings p.122 Language/ For changing the language in
  • Pentax 18506 | Operation Manual - Page 48
    Mode Capture Modes R Program mode d Picture mode - Auto Select mode = Portrait mode H Landscape mode . Night-Scene mode C Movie mode + Digital Effect mode Lets the camera automatically select the shutter speed and aperture, this is the basic picture-taking mode. You can select the Picture mode
  • Pentax 18506 | Operation Manual - Page 49
    Taking Pictures 1 Turn the mode dial and match the indicator with one of the following: Rd-=.HC+. Indicator Displaying Shooting Information in Capture Mode The LCD monitor display changes each time you press the DISPLAY button. Normal Display Shooting information is displayed when the power 1 2
  • Pentax 18506 | Operation Manual - Page 50
    Taking Pictures No Icons No shooting information is displayed. • The focus frame appears in Autofocus mode. • If any of the modes are changed, such as the flash mode, the mode you have changed appears for a few seconds. LCD Monitor Off The LCD monitor turns off. The LCD monitor cannot be turned
  • Pentax 18506 | Operation Manual - Page 51
    Quality] in [A Rec. Mode] Menus cannot be set. • You are recommended to set the mode dial to . and secure the camera on a tripod etc. when taking night views. If the camera recognizes the scene as the . in the Auto Select Mode, pictures of night views may be dark because the shutter speed
  • Pentax 18506 | Operation Manual - Page 52
    the button or mode that you want to be explained. 5 Press the OK button. The explanation of the button appears. 6 Press the OK button. The camera is ready to take or play back pictures. This button changes the Focus mode. AF Macro Super macro infinity
  • Pentax 18506 | Operation Manual - Page 53
    the four-way controller (45) to change the setting. Recorded pixels: 2816x2112 (6M) Quality level: 5 Press the OK button. MENU E x i t OK OK The camera is ready to take the picture. The Image Quality function is only available in - (Auto Select) mode. In other modes, set the recorded pixels
  • Pentax 18506 | Operation Manual - Page 54
    set the functions (Program Mode) 4 In R (Program Mode) the camera automatically selects the shutter speed and aperture; this is the basic picture-taking mode. However, you can select the flash mode or continuous shooting mode,
  • Pentax 18506 | Operation Manual - Page 55
    Taking Pictures 1 5, 6 2, 3 4 Selecting the Picture Mode According to the Shooting Scene (Picture Mode) You can select the Picture mode according to the shooting scene. 4 There are 9 available modes in Picture mode. Flower (default setting) Lets you take brightly colored flower pictures.
  • Pentax 18506 | Operation Manual - Page 56
    3 Use the four-way controller (2345) to choose the Picture mode. Flower 4 5 46 Press the OK button. The Picture mode is selected. Press the shutter release button halfway. The focus frame turns green if the subject is in focus. Press the shutter release button fully. The picture is taken. OK OK 8
  • Pentax 18506 | Operation Manual - Page 57
    dark scenes, such as nightscapes, with the 4 appropriate settings. The shutter speed is slower when taking pictures of dark scenes. To prevent camera shake, secure the camera on a tripod or other surface. 1 Set the mode dial to .. 2 Press the shutter release button halfway. The focus frame turns
  • Pentax 18506 | Operation Manual - Page 58
    1 2, 3 Taking Pictures Taking Landscape Views (Landscape Mode) This mode lets you take landscape views using the optimal settings. 4 1 Set the mode dial to H. 2 Press the shutter release button 4 halfway. The focus frame turns green if the subject is in focus. 3 Press the shutter release
  • Pentax 18506 | Operation Manual - Page 59
    shutter release button. Recording starts. The flash status lamp 09/10/2005 10:25 flashes during recording. You can change the captured area, with the digital zoom, by pressing the Zoom/w/x button. x : enlarges the subject. w: enlarges the area captured by the
  • Pentax 18506 | Operation Manual - Page 60
    zoom while recording in Movie mode. You should compose the picture on the LCD monitor when you use the digital zoom function. Playing Back Movies 1p.94 Disabling the Digital Zoom Function 1p.60 4 Keeping the Shutter Release Button Pressed Recording starts when you keep the shutter release button
  • Pentax 18506 | Operation Manual - Page 61
    x (Tele) : enlarges the subject. w (Wide) : enlarges the area captured by the camera. 4 4 The digital zoom function is turned on in initial settings. When the digital zoom function is enabled, you can combine the digital zoom with the optical zoom to give a maximum zoom magnification equivalent to
  • Pentax 18506 | Operation Manual - Page 62
    to select P(Off). Memory Sharpness 4 Press the OK button. Saturation MENU E x i t OK OK The camera is ready to take pictures. The digital zoom is disabled when you turn the LCD monitor off, even if 4 the digital zoom function is set to On. • You should compose the picture on the LCD monitor
  • Pentax 18506 | Operation Manual - Page 63
    seconds after the self-timer lamp starts to blink. Focusing position may shift if you move the camera while the self-timer lamp is blinking. • The second count appears if you turn the LCD count is displayed. Taking Pictures of Yourself 1p.53 Troubleshooting: "Subject is not in focus" 1p.137 61
  • Pentax 18506 | Operation Manual - Page 64
    2, 3 1 - d R + . H = Continuous Shooting (Continuous Shooting Mode) 4 Pictures are taken continuously while the shutter release button is pressed. 1 Press the four-way controller (2) in Capture mode to display j on 4 the LCD monitor. Taking Pictures 09/10/2005 10:25 2 Press the shutter
  • Pentax 18506 | Operation Manual - Page 65
    switch the Drive mode to Remote Control mode and take pictures 4 using the remote control unit for Pentax cameras (optional). The remote control receiver is on the front of the camera. Stabilize the camera using a tripod, etc. and use the remote control unit pointing it towards the front (lens side
  • Pentax 18506 | Operation Manual - Page 66
    the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. to +. 2 Press the four-way controller (3). The screen for choosing a digital effect mode appears. 3 Use the four-way controller (2345) to choose
  • Pentax 18506 | Operation Manual - Page 67
    the picture and the second image in the right half. 1 Set the mode dial to +. 4 2 Press the four-way controller (3). The screen for choosing a digital effect mode appears. 3 Use the four-way controller (23 45) to select == (Two-in-One). 4 Press the OK button. The screen for taking the first
  • Pentax 18506 | Operation Manual - Page 68
    Assist Mode) 4 You can take a number of images and join them together to form a panorama picture. The software (ACDSee for PENTAX) on the CD-ROM (S-SW32) provided with the camera and a computer are necessary for joining the images. The Panorama Assist mode enables you to overlap the edges of the
  • Pentax 18506 | Operation Manual - Page 69
    Dial to switch to another mode. • The camera cannot join the images. Use the ACD Photostitcher function provided in the ACDSee for PENTAX software. Refer to "Photosticher Function" (p.23) in the "ACDSee for PENTAX User Guide" for instructions on creating panorama pictures. • Continuous shooting is
  • Pentax 18506 | Operation Manual - Page 70
    This mode is used for taking distant objects. Manual Focus mode Adjust the focus manually with the four-way controller. 1 Press the camera is ready to take pictures in the selected focus mode. • The default setting is Autofocus mode. • The zoom is fixed at the middle position and only the digital
  • Pentax 18506 | Operation Manual - Page 71
    Focus When the mode is set to z (Manual Focus), the central portion of the picture is enlarged to full screen on the LCD monitor for focus adjustment. Pressing the four-way controller (23) displays the indicator on the LCD monitor. Use the indicator as a guide while adjusting the focus with the four
  • Pentax 18506 | Operation Manual - Page 72
    four-way controller (4) in Capture mode. The flash mode changes each time the button is pressed and the icon appears on the LCD monitor. The camera is ready to take pictures in the selected flash mode. Status of the Focus Status Lamp and Flash Status Lamp 1p.33 Saving the Flash
  • Pentax 18506 | Operation Manual - Page 73
    -way controller (45) Quality Level White Balance AWB to change the size. Focusing Area Multi 4 Press the OK button. AE Metering Sensitivity Auto The camera is ready to take the picture. MENU E x i t OK OK • The number of recorded pixels is fixed at [320×240] in Movie mode. • Selecting
  • Pentax 18506 | Operation Manual - Page 74
    ) Quality Level White Balance AWB to change the quality level. Focusing Area AE Metering Multi 4 Press the OK button. Sensitivity MENU E x i t Auto OK OK The camera is ready to take the picture. The Quality Level setting is saved when the
  • Pentax 18506 | Operation Manual - Page 75
    white according to the light source. White Balance F Auto The camera adjusts the white balance automatically. G Daylight Use this mode when taking pictures under fluorescent light. K Manual Use this mode when taking pictures by adjusting the white balance manually. 1 Press the MENU button in
  • Pentax 18506 | Operation Manual - Page 76
    Setting Place a white material such as a piece of white paper in front of your camera to adjust white balance. 1 To select K (manual), press the four-way controller (3 2) on the "White Balance" screen. 2 Point the camera at the white White Balance material so that it fills the frame of AWB the
  • Pentax 18506 | Operation Manual - Page 77
    Level White Balance AWB to change the setting. Focusing Area AE Metering Multi 4 Press the OK button. Sensitivity MENU E x i t Auto OK OK The camera is ready to take the picture. When the shutter release button is pressed while [Multi] is selected for the focusing area, the focus frame
  • Pentax 18506 | Operation Manual - Page 78
    Level White Balance AWB to change the AE Metering mode. Focusing Area AE Metering Multi 4 Press the OK button. Sensitivity MENU E x i t Auto OK OK The camera is ready to take the picture. Saving the AE Metering Mode 1p.84 76
  • Pentax 18506 | Operation Manual - Page 79
    shutter speed will be slower in low light conditions. 320 • The higher the sensitivity, the faster the shutter speed in low light conditions to reduce camera shake, but the image may be affected by 400 noise. 1 Press the MENU button in Capture mode. The [A Rec. Mode] menu appears. 2 Use the
  • Pentax 18506 | Operation Manual - Page 80
    to select [Frame Rate]. Frame Rate 30fps 3 Use the four-way controller (45) Digital Zoom Instant Review 0.5sec to change the frame rate. Memory Sharpness 4 Press the OK button. Saturation MENU E x i t OK OK The camera is ready to take the picture. The Frame Rate setting is saved when the
  • Pentax 18506 | Operation Manual - Page 81
    Rec. Mode] menu appears. 2 Use the four-way controller (23) Rec. Mode to select [Instant Review]. Frame Rate 30fps 3 Use the four-way controller (45) Digital Zoom Instant Review 0.5sec to change the display time. Memory Sharpness 4 Press the OK button. Saturation MENU E x i t OK OK The
  • Pentax 18506 | Operation Manual - Page 82
    [Sharpness]. Frame Rate 30fps 3 Use the four-way controller (45) Digital Zoom Instant Review 0.5sec to change the setting from Memory Sharpness x [ Soft (-)]. MENU E x i t OK OK 4 Press the OK button. The camera is ready to take the picture. • Any changes made to the Sharpness setting
  • Pentax 18506 | Operation Manual - Page 83
    [Saturation]. Frame Rate 30fps 3 Use the four-way controller (45) Digital Zoom Instant Review 0.5sec to change the setting from Memory Sharpness x [ Low (-)]. MENU E x i t OK OK 4 Press the OK button. The camera is ready to take the picture. • Any changes made to the Saturation setting
  • Pentax 18506 | Operation Manual - Page 84
    controller (45) EV Compensation 0.0 to change the setting from x [Normal] to z [High (+)] or y [Low (-)]. MENU E x i t OK OK 4 Press the OK button. The camera is ready to take the picture. • Any changes made to the Contrast setting are invalid in d, H and = modes. • The Contrast setting is
  • Pentax 18506 | Operation Manual - Page 85
    (-) value. MENU E x i t OK OK You can choose the EV setting in the range of -2.0 EV to +2.0 EV in 1/3 EV steps. 4 Press the OK button. The camera is ready to take the picture. EV Compensation is registered on the four-way controller (45) in the Fn Setting default settings in Capture mode
  • Pentax 18506 | Operation Manual - Page 86
    Digital Zoom] setting on the [A Rec. Mode] menu is saved. O Focus Mode The focus mode setting on the ) button is saved. P Zoom Position The optical zoom position on the Zoom button is saved. P MF The manual when the camera is turned off. • The zoom position setting in the digital zoom range
  • Pentax 18506 | Operation Manual - Page 87
    23) Rec. Mode to select [Memory]. Frame Rate 3 Press the four-way controller (5). Digital Zoom Instant Review 30fps 0.5sec 4 The [Memory] menu appears. Memory Sharpness Saturation MENU twice. Sensitivity MENU E x i t OK OK The camera is ready to take the picture. Taking Pictures 85
  • Pentax 18506 | Operation Manual - Page 88
    during recording. 00 : 01 : 22 Press the shutter release button. Recording stops. The remaining recordable time appears. SHUTTER S t a r t 2 To exit Voice Recording mode, turn the camera off. • Sound is saved in WAVE monaural files. • The microphone is located on the front of the
  • Pentax 18506 | Operation Manual - Page 89
    /f/y button (x) Increases the volume Zoom/f/y button (w) Reduces the volume 4 Press the four-way controller (3). Playback stops. 5 Press the Q Playback button. The camera returns to the Voice Recording mode. If you enter the Playback mode from a Capture mode other than Voice Recording mode, the
  • Pentax 18506 | Operation Manual - Page 90
    want to add a voice memo. O appears on the four-way controller operation guide on the LCD monitor if there is no voice memo attached to the displayed image the OK button. 100-0004 09/10/2005 10:25 Four-way controller operation guide Recording of the voice memo starts. You can record for up to 30
  • Pentax 18506 | Operation Manual - Page 91
    MENU 2, 3 4 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Setting the Voice Memo Recording Function You can set the camera not to record voice memos while playing back still images to prevent any voice memo from being recorded. 1 Press the MENU
  • Pentax 18506 | Operation Manual - Page 92
    1, 2, 3 Playing Back a Voice Memo 1 Enter the Playback mode and use the four-way controller (45) to choose the image with the voice memo that you want to play back. 5 2 If U appears, a voice memo has been recorded for the displayed image. Press the four-way controller (2). The voice memo is
  • Pentax 18506 | Operation Manual - Page 93
    Memo 5 91 Recording and Playback of Sound
  • Pentax 18506 | Operation Manual - Page 94
    button. Refer to "Playing Back Images" (p.34) for instructions. Zoom Display You can display images magnified up to 12 times. A guide to operation 6 appears on the LCD monitor during magnification not change the mode to the Capture mode when the camera is turned on in Playback Only mode. Turn the
  • Pentax 18506 | Operation Manual - Page 95
    MENU 2, 3 4 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Setting the Quick Zoom Function Zoom/f/y button once magnifies the image in steps. 4 Press the OK button. The camera is ready to take or play back images. Playback/Deleting/Editing 93
  • Pentax 18506 | Operation Manual - Page 96
    4 1, 2, 3 Playing Back Movies You can play back movies. A guide to operation appears on the LCD monitor during playback. Sound is recorded at stops and the screen returns to the start playback screen. 4 Press the Q Playback button. The camera returns to Capture mode. Playback/Deleting/Editing 94
  • Pentax 18506 | Operation Manual - Page 97
    changes the display mode. Normal Display Shooting information is displayed. 1 Protect icon 3 Folder name and file name 5 Four-way controller operation guide 6 Shooting date and time 7 Battery level indicator 2 Voice Memo icon 4 Memory status indicator ? SD Memory Card Y card lock status @ built
  • Pentax 18506 | Operation Manual - Page 98
    2, 3 1 Nine Image Display You can display nine images at the same time. 1 Enter the Playback mode and use the four-way controller (45) to choose an image. 2 6 3 Press w/f on the Zoom/f/y button. Nine images appear. 1 Use the four-way controller (2345) to 100-0017 choose an image. When ten
  • Pentax 18506 | Operation Manual - Page 99
    The [Q Playback] menu appears. Protect 3 Use the four-way controller (23) DPOF Slideshow 6 3sec to select [Slideshow]. Resize Image/Sound Copy 4 Digital Filter Use the four-way controller (45) MENU Exit OK OK to change the playback interval. Choose from the following: 3 sec, 5 sec, 10
  • Pentax 18506 | Operation Manual - Page 100
    Deleting 2 1, 3 4 Playback/Deleting/Editing Deleting Individual Images or Sounds You can delete images and sound recordings one at a time. 61 2 3 4 • Once deleted, images cannot be restored. • You cannot display the Delete screen from protected images. (1p.101) Enter the Playback mode and use
  • Pentax 18506 | Operation Manual - Page 101
    the four-way controller (23) to select [Quick Delete]. 3 Use the four-way controller (45) to select [On] or [Off]. 4 Press the OK button. The camera is ready to take or play back images. Playback/Deleting/Editing 99
  • Pentax 18506 | Operation Manual - Page 102
    1 2 3 Deleting All Images You can delete all the images and sounds at once. 1 2 63 • Once deleted, images cannot be restored. • Protected images and sounds cannot be deleted. Press the i Delete button twice in Playback mode. The Delete All screen appears. Use the four-way controller (2) to
  • Pentax 18506 | Operation Manual - Page 103
    MENU 2, 3, 4, 5 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Protecting Images and Sounds from Deletion (Protect) You can protect images and sounds from being accidentally deleted. 1 Press the MENU
  • Pentax 18506 | Operation Manual - Page 104
    4 MENU 2, 3, 5 6 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Protecting All Images and Sounds You can protect all the images and sounds. 1 Press the MENU button in Playback mode.
  • Pentax 18506 | Operation Manual - Page 105
    TV. When using stereo sound equipment, insert the sound terminal into the L (white) terminal. 3 Turn the TV and camera on. To select the correct video input terminal when there is more than one, refer to the operating manual for the TV (or other AV equipment) that you want to connect to the
  • Pentax 18506 | Operation Manual - Page 106
    cannot use the remote control unit to start or stop movies, still images with sound or sound only files, so use the buttons on the camera. Also, the remote control unit cannot be used at all while movies, still images with sound or sound only files are being played back or
  • Pentax 18506 | Operation Manual - Page 107
    Digital Print Order Format) compatible printer or at a printing service. MENU 2, 3, 4, 5, 6 7 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital -in memory, check that there is no SD Memory Card inserted in the camera. 1 Press the MENU button in Playback mode. The [Q Playback] menu
  • Pentax 18506 | Operation Manual - Page 108
    in memory to the SD Memory Card first. • You cannot set the printing service for movies or sound-only files. • Depending on the printer or printing equipment Pictures may not be printed correctly when the camera is connected directly to a PictBridge-compatible printer if the total number
  • Pentax 18506 | Operation Manual - Page 109
    5, 6, 7 8 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Playback/Deleting/Editing Printing number is correct. • Pictures may not be printed correctly when the camera is connected directly to a PictBridge-compatible printer if the total number of
  • Pentax 18506 | Operation Manual - Page 110
    Using PictBridge By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been
  • Pentax 18506 | Operation Manual - Page 111
    Printing Single Images 1 Use the four-way controller (23) to select [Print One]. 2 Press the OK button. The Print One screen appears. 3 Use the four-way controller (45) to choose the image to print. 4 Use the four-way controller (23) to choose the number of copies. You can print up to 99 copies.
  • Pentax 18506 | Operation Manual - Page 112
    Printing All Images 1 Use the four-way controller (23) to select [Print All]. 2 Press the OK button. The Print All screen appears. 3 Use the four-way controller (23) Print All to choose the number of copies. Copies Total 01 Date 20 The number of copies you choose applies to DISP D a t e
  • Pentax 18506 | Operation Manual - Page 113
    Disconnecting the Camera from the Printer Disconnect the camera from the printer when you have finished printing. 1 Turn the camera off. 2 Disconnect the USB cable from the camera. 3 Disconnect the USB cable from the printer. 6 111 Playback/Deleting/Editing
  • Pentax 18506 | Operation Manual - Page 114
    Editing Images MENU 2, 3, 4, 6, 7, 8, 10 5, 9, 11 1 Playback Protect DPOF Slideshow Resize Image/Sound Copy Digital Filter MENU E x i t 3sec OK OK Changing the Image Size and Quality By changing the size and quality of a selected image, you can make the file
  • Pentax 18506 | Operation Manual - Page 115
    6 Use the four-way controller (45) to change the recorded pixels. 7 Press the four-way controller (3). 100-0001 Select resolution and quality The frame moves to [Quality Level]. 8 Use the four-way controller (45) to change the quality. Recorded Pixels Quality Level MENU E x i t 2560 OK OK 9
  • Pentax 18506 | Operation Manual - Page 116
    blue, black-and-white + red, black-and-white + green, black-andwhite + blue), a soft filter, five illustration filters and two special effect filters. The Digital Filter mode enables you to edit pictures using these filters. The image which has been created with the special effect appears on the LCD
  • Pentax 18506 | Operation Manual - Page 117
    5 Use the four-way controller (23) to choose a digital filter. The filter effect is created and the image appears on the LCD monitor. The example shows an [Overwrite] or [Save as]. 8 Press the OK button. The image is saved with the digital filter effect. 6 Playback/Deleting/Editing 115
  • Pentax 18506 | Operation Manual - Page 118
    Digital Filter MENU E x i t 3sec OK OK You can copy image and sound files from the built-in memory to the SD Memory Card and vice versa. This function can only be selected when a card has been inserted in the camera 1 2 3 Be sure to turn the camera off before inserting or removing the SD Memory
  • Pentax 18506 | Operation Manual - Page 119
    To Copy Files from the Built-in Memory to the SD Memory Card 4 Use the four-way controller (23) to select [ 5 ] and press the OK button. Image/Sound Copy All the files are copied to the SD Memory Card. Cancel MENU E x i t OK OK To Copy Files from the SD Memory Card to the Built-in Memory 4
  • Pentax 18506 | Operation Manual - Page 120
    if you are using a card, and all the data in the built-in memory if there is no card inserted. 7 1 2 3 4 • Do not turn off the camera or remove the battery or SD card or disconnect the AC Adapter until the formatting is complete or the memory card may be damaged. • SD
  • Pentax 18506 | Operation Manual - Page 121
    7 3 Press the four-way controller (23) to select [Volume]. 4 Use the four-way controller (45) to adjust the volume. 5 Press the OK button twice. The camera is ready to take or play back images. Changing the Type of Start-up Sound, Shutter Sound and Key Operation Sound 3 Use the four-way
  • Pentax 18506 | Operation Manual - Page 122
    Time You can change the initial date and time settings. You can also set the style in which the date and time appears on the camera. 1 Select [Date Adjust] on the [B Set-up] menu. 2 Press the four-way controller (5). The Date Adjust screen appears. 3 Press the four-way controller (23), Date
  • Pentax 18506 | Operation Manual - Page 123
    previous item.) If you select [12H] in step 3, the setting switches between AM and PM corresponding to the time. 8 Press the OK button twice. The camera is ready to take pictures. 7 Settings 121
  • Pentax 18506 | Operation Manual - Page 124
    How to call the [B Set-up] menu MENU Four-way controller OK button MENU button Rec. Mode Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity MENU E x i t 2816 AWB Multi Auto OK OK Setting the World Time The date and time selected in "Initial Setting" (p.28) serve
  • Pentax 18506 | Operation Manual - Page 125
    (New York)]. Use the four-way controller (45) to change the W (Home Time) city and choose the DST setting. 7 Press the OK button twice. The camera is ready to take or play back images with the time in the selected city. Refer to page 132 for the list of cities and
  • Pentax 18506 | Operation Manual - Page 126
    as the welcome screen when the camera is turned on. 3 Use the four-way controller (23) to select [Start-up Screen]. 4 Press the four-way controller (5). Start-up Screen The Change Start-up screen appears. Start-up Screen 5 Use the four-way controller (45) Optio to select O (On) or P (Off
  • Pentax 18506 | Operation Manual - Page 127
    MENU E x i t OK OK 8 Press the OK button four times. The camera is ready to take or play back images. Once the start-up screen has been set menu changes. MENU Exit OK OK 5 Press the OK button twice. The camera is ready to take or play back images. Using Screen Effects You can display
  • Pentax 18506 | Operation Manual - Page 128
    ) and Japanese. 1 Select [Language/ ] on the [B Set-up] menu. 2 Use the four-way controller (45) to choose the language. 3 Press the OK button. The camera is ready to take or play back images. 7 Adjusting the Brightness of the LCD Monitor You can adjust the brightness of the LCD monitor. 1 Select
  • Pentax 18506 | Operation Manual - Page 129
    [NTSC] or [PAL]. Choose the video output format to match the output format of the TV or other video device. 3 Press the OK button. The camera is ready to take or play back images. 7 Settings 127
  • Pentax 18506 | Operation Manual - Page 130
    to be connected to the computer or printer. Do not connect the camera to your PC while [PictBridge] is selected for the USB connection mode. Refer to the "PC Connection Manual" for instructions on connecting the camera to a printer or a computer. Direct Printing Using PictBridge 1p.108 Settings
  • Pentax 18506 | Operation Manual - Page 131
    MENU E x i t OK OK Setting Auto Power Off You can set the camera to turn off automatically when no operation is performed for a fixed time. 1 Select min], [3 min], [5 min] or [Off]. 3 Press the OK button. The camera is ready to take or play back images. The Auto Power Off function will not work
  • Pentax 18506 | Operation Manual - Page 132
    Level on 3, EV Compensation (-) on 4 and EV Compensation (+) on 5. Select [Off] if you do not want to register a function. Press the OK button twice. The camera is ready to take or play back images. • Only one function can be registered on each key of the four-way controller. • You can choose
  • Pentax 18506 | Operation Manual - Page 133
    . (1p.83) When White Balance is registered and you select K (manual), press the OK button to adjust the white balance. (1p.74) Press the 0 button or the shutter release button. The setting is saved and the camera is ready to take pictures. • You cannot access functions by pressing the 0 button
  • Pentax 18506 | Operation Manual - Page 134
    Appendix List of City Codes Refer to the following list of city codes when setting the World Time. TYO GUM SYD NOU WLG AKL PPG HNL ANC YVR SFO LAX YYC DEN MEX CHI MIA YTO NYC SCL CCS 8 YHZ BUE SAO RIO MAD LON PAR MIL ROM BER Tokyo Guam Sydney Noumea Wellington Auckland Pago Pago Honolulu
  • Pentax 18506 | Operation Manual - Page 135
    Optional Accessories A number of dedicated accessories are available for this camera. AC adapter D-AC5 USB cable I-USB7 (∗) AV cable I-AVC7 (∗) Camera case O-CC32 Strap O-ST20 (∗)/Sports strap O-ST30/Leather Strap O-ST24/ Strap O-ST8 Remote control unit E (with zoom function) Remote control unit F
  • Pentax 18506 | Operation Manual - Page 136
    play this You are trying to play back an image or sound in a format image/sound not supported by this camera. You may be able to play it back on another brand of camera or PC. 8 The card memory is not When copying data from the built-in memory to an SD enough
  • Pentax 18506 | Operation Manual - Page 137
    Deleting Formatting Battery depleted Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to play back It may also appear when you turn on the power after purchasing the camera or after replacing the batteries if the batteries had been removed for a
  • Pentax 18506 | Operation Manual - Page 138
    Troubleshooting Problem Cause Remedy Camera will not Batteries are not turn on installed Check batteries are installed .If not, install batteries. Batteries are installed incorrectly Check orientation of batteries. Reinsert
  • Pentax 18506 | Operation Manual - Page 139
    Problem aim at target and press shutter release button fully, or use Manual Focus mode. Subject is not in focusing Position subject in focus on the power a new battery, removed previously. after purchasing the camera or after [Battery replacing the batteries if the batteries had depleted]
  • Pentax 18506 | Operation Manual - Page 140
    Format Quality Level Storage Medium Fully automatic compact digital still camera with built-in zoom lens 6.0 megapixels 6.36 , 1600×1200 pixels, 1024×768 pixels, 640×480 pixels Movie 320×240 pixels Auto, manual (80, 160, 320, 400: Standard Output Sensitivity) Still Picture JPEG (Exif2.2), DCF
  • Pentax 18506 | Operation Manual - Page 141
    is filled) (Super Macro mode) Lens Cover Electrically driven Digital Zoom Capture Mode Max approx. 2.6× (combines with 3× (full zoom range) SLaunpdesrcMaapcer:o∞: 0(.0fu6llmzo-o0m.2ramng(feo)cal length 10.2 mm) Manual Focus Focus Lock By half-pressing shutter release button 0.18 m - ∞ (0.06
  • Pentax 18506 | Operation Manual - Page 142
    23°C.) *2 The playback times are a guideline based on PENTAX measuring conditions and may vary depending on the actual shooting conditions NTSC/PAL (Monaural) PictBridge Compatible printers Printers that support PictBridge Print Modes Print One Print All Print with manual 8 Appendix 140
  • Pentax 18506 | Operation Manual - Page 143
    ) 53 = (Portrait Mode) 56 H (Landscape Mode) 56 . (Night-Scene Mode) 55 C (Movie Mode) 57 + (Digital Effect Mode) 64, 65, 66 Focus Mode q (Macro mode) 68 r (Super Macro mode) 68 s (Infinity-Landscape mode) 68 z (Manual Focus mode) 68, 69 Drive Mode g (Self-Timer / 10 sec.) 61 r (Self-Timer / 2 sec
  • Pentax 18506 | Operation Manual - Page 144
    18 Delete 98 Delete a Voice Memo 99 Delete Sound 99 Digital Effect Mode 64, 65, 66 Digital Filter 64 Digital Zoom 59, 60 DISPLAY button 14, 36, 37, 38 DPOF 126 Light Metering Mode 76 M Macro mode 68 Magnify 42, 92 Manual (White Balance) 73 Manual Focus mode 68 Memory 84 MENU button 14, 36, 37, 38
  • Pentax 18506 | Operation Manual - Page 145
    Date and Time 30 Setting the Display Language 28 Setting the Printing Service 105 Shade (White Balance) 73 Sharpness 80 Shooting Information 47 32, 33, 38 8 Slideshow 97 Snow (Picture Mode) 53 Soft Filter (Digital Filter) 114 Sound 119 Start-up Screen 124 Strap 15, 133 Sunset (Picture
  • Pentax 18506 | Operation Manual - Page 146
    T Taking Movies 57 Taking Pictures 32, 46 Text (Picture Mode) 53 Tungsten Light (White Balance) 73 TV 103 Two-in-One 65 U USB Connection Mode 128 V Video Output Format 31, 127 Voice Memo 88 Voice Recording Mode 86 Volume 87, 94, 119 W White Balance 73 World Time 122 Z Zoom 59 8 Zoom button 36, 37
  • Pentax 18506 | Operation Manual - Page 147
    Memo 8 145 Appendix
  • Pentax 18506 | Operation Manual - Page 148
    PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service service charge, and only after you accept the quoted service charge, instruct the service station
  • Pentax 18506 | Operation Manual - Page 149
    this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. 8 The CE Mark is a Directive conformity mark of the
  • Pentax 18506 | Operation Manual - Page 150
    has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
  • Pentax 18506 | Operation Manual - Page 151
    operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109. Product Name: PENTAX Digital Still Camera Model Number: Optio S60 Contact person: Customer Service Manager Date and Place: September 2005, Colorado
  • Pentax 18506 | Operation Manual - Page 152
    Information on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products. Used electric/electronic equipment
  • Pentax 18506 | Operation Manual - Page 153
    Memo
  • Pentax 18506 | Operation Manual - Page 154
    Memo
  • Pentax 18506 | Operation Manual - Page 155
    Memo
  • Pentax 18506 | Operation Manual - Page 156
    America,Inc. (Headquarters) 600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A. (Distribution & Service Center) 16163 West 45th Drive, Unit H Golden, Colorado 80403, U.S.A. (http://www.pentaximaging.com) PENTAX Canada Inc. 1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA (http://www
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.