Pentax ZX-60 ZX-60 Manual - Page 42
discharges.
View all Pentax ZX-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
NUAL POP UP THE BUILT-IN FLASH 1Push the flash pop-up button to activate the flash. S.AULO] will disappear on the LCD panel. Dr, 2 appears in the viewfinder and on the LCD panel when the flash is fully charged. ON/OFF %A A .16 N.RITvAvM •-• • Av SC e__ 3 Depress the shutter release button fully, and the flash unit discharges. On MEMO • The built-in flash does not pop up even if the flash pop-up button is depressed with the flash mode is set to 3EI . • This mode can be used with the red-eye reduction together. • When the flash pop up button is depressed, I is disappeared from the LCD pane if auto flash mode was set, and the flash is always discharged even if the subject is not required flash light. • The shutter cannot be released until the flash is fully charged. • Do not use a lens hood with the built-in flash as it may obstruct the path of the light coming from the flash, causing vignetting in the picture corners. • With the built-in flash popped up, an external flash cannot be attached to the hot shoe. If you would like to use an external flash together with the built-in flash, see the flash connections on page 93. 4 After using the Built-in flash, push down the flash head to lock it in the closed position. cr; WLY