Pfaff Tipmatic 1025 Owner's Manual

Pfaff Tipmatic 1025 Manual

Get Pfaff Tipmatic 1025 PDF manuals and user guides View all Pfaff Tipmatic 1025 manuals
Add to My Manuals
Save this manual to your list of manuals

Pfaff Tipmatic 1025 manual content summary:

  • Pfaff Tipmatic 1025 | Owner's Manual - Page 1
    c©j1 00 00
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 2
    accessory compartment Electrical connection Foot control Placing spool of thread on pin Upper threading Threading the needle Disengaging the sewing mechanism Bobbin winding Removing bobbin case and bobbin Inserting the bobbin Inserting the bobbin case Drawing up the bobbin thread Presser bar lifter
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 3
    c) 0
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 4
    Parts of your sewing machine Some safety rules I 30 Carrying handle 31 Hinged top cover 32 Hand wheel 33 Stop motion knob 34 Master switch 35 Finger-tip controls 36 Stitch length control 37 Swing-out sewing arm with accessory compartment 38 Needle plate 39 Sewing foot holder with sewing foot 40
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 5
    fold the handle toward the rear. Swing cover 31 backwards. On Model 1027 a stitch chart is found on the inside of this cover (A). Removing and opening the swing-out arm Reach under the swing-out arm with your left hand (B), swing it out toward the left (C) and lift it out (D). Open its
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 6
    Accessory box and accessory compartment sTliofiltrtyitucpooutmht ep(Aaf)rr.tomTnhet enortfe(aBics)caeunsnsdaoedrrdynietbiaootnxha.4l 6acacneds Ill. C shows how the second spool holder snap-on sewing feet, the and the seam ripper fit into the box. I;- C 2 . C a 0 0
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 7
    34. Your machine is now readyfor sewing. When you put the machine away, the foot control is placed in the machine again as shown in the illustration (A). Foot control Place the foot control under the table. Press down the pedal, and the machine starts sewing. The more the pedal is depressed, the
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 8
    the drawing. C Second spool holder: This is contained in the accessory box and is used for bobbin winding and twinneedle sewing. Insert the spool holder in hole F and place a spooi of thread on it. Upper threading Raise the sewing foot. Pull the thread from the spool and draw it into slot A (to the
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 9
    Threading the needle Thread the needle from front to back. V Disengaging the sewing mechanism Before you start winding the bobbin, disen gage the sewing mechanism. Hold the hand wheel steady and turn the stop motion knob toward you. After bobbin winding, tighten the knob again by turning it away
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 10
    and take it out. Then re-engage the sewing mechanism. Leave the top cover open during bobbin winding. Winding the bobbin through the needle eye (B) Raise the sewing foot and bring the needle to its highest point. Disengage the sewing mechanism. Place a bobbin on spindle 47 so that pin Centers slot
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 11
    Removing bobbin case and bobbin Open free arm cover 48. Pull out latch K, then lift out the bobbin case, release the latch and take out the bobbin. The bobbin cannot fall out as long as you keep latch K pulled out. Inserting the bobbin Insert the filled bobbin into the bobbin case so that the
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 12
    snapped into place. Drawing up the bobbin thread Hold the needle thread a little taut. Turn hand wheel 32 toward you until the needle movesdownand upagainandthetake-up lever is up. Pull the bobbin thread out of the needle hole and lay both threads toward the left and back under the sewing foot. 8
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 13
    is raised. (Before you remove the work, turn the hand wheel toward you to raise the needle and take-up lever 52.) B = The sewing foot is raised further for inserting extra-thick materials. C The sewing foot is lowered for sewing. Thread cutter The thread cutter is an oblique slot located at the
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 14
    D = Upper tension too loose or lower tension too tight. E Lower tension too loose or upper tension too tight. The correct lower tension Let the bobbin case with a full bobbin hang down freely by the thread. It must not slide down by its own weight, but should gradu ally move downwards when you jerk
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 15
    is opposite mark A. Stitch length range: Model 1025: 0-4 Model 1027: 0-6 Ill. B shows how to set the stitch length control for sewing stretch stitches (red stitch symbols on push buttons). Reverse sewing Push button 44. As long as you keep this button depressed, the machine sews back wards. 11
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 16
    Finger-tip controls of model 1027 10 Elastic triple straight stitch Straight stitch 11 Pullover stitch Blindstitch 1 2 2 mm 2-mm zigzag stitch 19, 20, 21: Buttons for buttonholing Button 20 is also used as clearing button for releasing the pushed buttons. Elastic blindstitch Push buttons 15 and 16.
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 17
    Finger-tip controls of model 1025 10 Elastic triple straight stitch Straight stitch 1 3 Overlock stitch Shell-edge 2 mm 2-mm zigzag stitch 19, 20, 21: Buttons for buttonholing Button 20 is also used as clearing button for releasing the pushed buttons. Elastic blindstitch Push buttons 15 and 16. I 13
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 18
    symbols) Push the desired button and turn the stitch length control to the number indicating the desired stitch length (1 -6 on model 1027, or 1-4 on model 1025). Selecting stretch stitches (red symbols) Push the desired button and turn the stitch length control as far as it will go (red symbol).
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 19
    1027 The various stitch combinations are shown in the chart on the inside of the hinged top cover. For example, if you want to sew an elastic blindstitch, push buttons 1 5 and 1 6, select a stitch length between 1 and 4. This stitch can also be sewn with model 1025. Selecting the needle position
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 20
    Dropping the machine feed Open free arm cover 48. Push the drop-feed control toward B. The feed dog is dropped (for embroidering, darning, etc.) For sewing, push the drop-feed control toward A. Changing the needle Raise the needle bar. Then hold the needle, loosen screw A and pull the needle out
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 21
    the sewing foot under the sewing foot holder and hold it in place with your left hand. Lower presser bar lifter 42 and at the same time reposition the sewing foot so that stud B fits in slot C. Hole E and screw Dare used for attaching an edge guide. Screw F serves to secure the sewing foot holder
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 22
    Blindstitch foot Blindstich guide E is adjusted by turning screw D. B Zipper foot First insert its rear pin into groove F, then push its front pin into groove G. The zipper foot can be adjusted sideways for stitching along the right or left zipper chain. C Darning foot Remove the sewing foot holder
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 23
    Pull the bottom of the buttonhole foot for ward as far as it will go. 1 Sew first buttonhole seam. Turn hand wheel torward you to raise the needle. 2 Push button 20 and keep it depressed until the machine has sewn 4 to 6 bartacking stitches. Raise the needle. Then release the button. 3 Push button
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 24
    Sewing feet A Normal sewing foot B Clear-view foot C Buttonhole foot D Hemmer foot E Zipper foot F Blindstitch foot G Darning foot H Guide I 98-694 A 98-694 563-00 D 98-694 401-00 20
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 25
    it up and turn it toward B. Cleaning and oiling Tilt needle plate 38 up at the back (A) and take it out (B). Clean the machine feed and the parts in the vicinity of the sewing hook with a sàft brush. Do not oil the machine because it is maintenance-free. All you have to do is put a drop of
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 26
    See par. 1 above. Regulate thread tensions. Use only good-quality thread. Insert new needle and push it up as far as it will go. Insert new needle. See Needle and Thread Chart. Let machine feed the work alone. Only guide the material lightly. When inserting the bobbin case, press against it until it
  • Pfaff Tipmatic 1025 | Owner's Manual - Page 27
    hold thread in hand, but pass it through the bobbin tension stud. Thread machine properly and check both tensions. 5. Machine feeds irregularly or not at all Lint has accumulated between tooth rows of feed dog. Remove needle plate and clean out lint. Feed dog dropped. (Reverse-feed control is at
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
c©j1
00
00